linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Arnd Bergmann <arnd@kernel.org>
To: Sean Young <sean@mess.org>, Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>,
	linux-media@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] media: rc: select CONFIG_BITREVERSE where needed
Date: Fri,  4 Dec 2020 00:17:03 +0100	[thread overview]
Message-ID: <20201203231714.1484408-1-arnd@kernel.org> (raw)

From: Arnd Bergmann <arnd@arndb.de>

A number of remote control drivers require the bitreverse
helper, and run into a link error when it is disabled:

arm-linux-gnueabi-ld: drivers/media/rc/img-ir/img-ir-nec.o: in function `img_ir_nec_scancode':
img-ir-nec.c:(.text+0x10c): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: drivers/media/rc/img-ir/img-ir-nec.o: in function `img_ir_nec_filter':
img-ir-nec.c:(.text+0x2dc): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: drivers/media/usb/cx231xx/cx231xx-input.o: in function `get_key_isdbt':
cx231xx-input.c:(.text+0x38c): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: drivers/media/usb/em28xx/em28xx-input.o: in function `em28xx_get_key_em_haup':
em28xx-input.c:(.text+0x1704): undefined reference to `byte_rev_table'

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/media/rc/Kconfig          | 2 ++
 drivers/media/rc/img-ir/Kconfig   | 1 +
 drivers/media/usb/cx231xx/Kconfig | 1 +
 drivers/media/usb/em28xx/Kconfig  | 1 +
 4 files changed, 5 insertions(+)

diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index 2c0ee2e5b446..8a4b4040be45 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -92,6 +92,7 @@ config IR_SONY_DECODER
 config IR_SANYO_DECODER
 	tristate "Enable IR raw decoder for the Sanyo protocol"
 	depends on RC_CORE
+	select BITREVERSE
 
 	help
 	   Enable this option if you have an infrared remote control which
@@ -101,6 +102,7 @@ config IR_SANYO_DECODER
 config IR_SHARP_DECODER
 	tristate "Enable IR raw decoder for the Sharp protocol"
 	depends on RC_CORE
+	select BITREVERSE
 
 	help
 	   Enable this option if you have an infrared remote control which
diff --git a/drivers/media/rc/img-ir/Kconfig b/drivers/media/rc/img-ir/Kconfig
index 5c0508f2719f..a80cfcd87a95 100644
--- a/drivers/media/rc/img-ir/Kconfig
+++ b/drivers/media/rc/img-ir/Kconfig
@@ -30,6 +30,7 @@ config IR_IMG_HW
 config IR_IMG_NEC
 	bool "NEC protocol support"
 	depends on IR_IMG_HW
+	select BITREVERSE
 	help
 	   Say Y here to enable support for the NEC, extended NEC, and 32-bit
 	   NEC protocols in the ImgTec infrared decoder block.
diff --git a/drivers/media/usb/cx231xx/Kconfig b/drivers/media/usb/cx231xx/Kconfig
index 2fe2b2d335ba..b80661b8375f 100644
--- a/drivers/media/usb/cx231xx/Kconfig
+++ b/drivers/media/usb/cx231xx/Kconfig
@@ -18,6 +18,7 @@ config VIDEO_CX231XX_RC
 	bool "Conexant cx231xx Remote Controller additional support"
 	depends on RC_CORE=y || RC_CORE=VIDEO_CX231XX
 	depends on VIDEO_CX231XX
+	select BITREVERSE
 	default y
 	help
 	  cx231xx hardware has a builtin RX/TX support. However, a few
diff --git a/drivers/media/usb/em28xx/Kconfig b/drivers/media/usb/em28xx/Kconfig
index f2031a933e54..8a24731b373a 100644
--- a/drivers/media/usb/em28xx/Kconfig
+++ b/drivers/media/usb/em28xx/Kconfig
@@ -77,5 +77,6 @@ config VIDEO_EM28XX_RC
 	depends on VIDEO_EM28XX
 	depends on !(RC_CORE=m && VIDEO_EM28XX=y)
 	default VIDEO_EM28XX
+	select BITREVERSE
 	help
 	  Enables Remote Controller support on em28xx driver.
-- 
2.27.0


             reply	other threads:[~2020-12-03 23:18 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-03 23:17 Arnd Bergmann [this message]
2021-01-19 14:54 ` [PATCH] media: rc: select CONFIG_BITREVERSE where needed Sean Young

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201203231714.1484408-1-arnd@kernel.org \
    --to=arnd@kernel.org \
    --cc=arnd@arndb.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=sean@mess.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).