linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andreas Kemnade <andreas@kemnade.info>
To: tony@atomide.com, ulf.hansson@linaro.org,
	wsa+renesas@sang-engineering.com, dianders@chromium.org,
	linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, letux-kernel@openphoenux.org
Cc: Andreas Kemnade <andreas@kemnade.info>
Subject: [PATCH] ARM: OMAP2+: omap_device: fix idling of devices during probe
Date: Fri,  4 Dec 2020 10:55:39 +0100	[thread overview]
Message-ID: <20201204095539.31705-1-andreas@kemnade.info> (raw)

On the GTA04A5 od->_driver_status was not set to BUS_NOTIFY_BIND_DRIVER
during probe of the second mmc used for wifi. Therefore
omap_device_late_idle idled the device during probing causing oopses when
accessing the registers.

It was not set because od->_state was set to OMAP_DEVICE_STATE_IDLE
in the notifier callback. Therefore set od->_driver_status also in that
case.

This came apparent after
commit 21b2cec61c04 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4")
causing this oops:

[    3.179534] omap_hsmmc 480b4000.mmc: omap_device_late_idle: enabled but no driver.  Idling
[    3.265594] 8<--- cut here ---
[    3.268707] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0b402c
[    3.276397] pgd = (ptrval)
[    3.279144] [fa0b402c] *pgd=48011452(bad)
[    3.283203] Internal error: : 1028 [#1] SMP ARM
[    3.287750] Modules linked in:
[    3.290832] CPU: 0 PID: 7 Comm: kworker/u2:0 Not tainted 5.10.0-rc6 #3
[    3.297393] Hardware name: Generic OMAP36xx (Flattened Device Tree)
[    3.303710] Workqueue: events_unbound async_run_entry_fn
[    3.309082] PC is at omap_hsmmc_set_bus_width+0x8/0x78
[    3.314239] LR is at omap_hsmmc_set_ios+0x11c/0x258
[    3.319152] pc : [<c079787c>]    lr : [<c07996bc>]    psr: 20000013
[    3.325469] sp : c10f9e00  ip : c175c800  fp : 00000066
[    3.330718] r10: c175cb80  r9 : fa0b4000  r8 : 00000000
[    3.335968] r7 : c123e010  r6 : c175ca58  r5 : c175cb80  r4 : c175c800
[    3.342529] r3 : 00000001  r2 : 58ad940c  r1 : fa0b4000  r0 : c175cb80
[    3.349090] Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[    3.356262] Control: 10c5387d  Table: 80004019  DAC: 00000051
[    3.362030] Process kworker/u2:0 (pid: 7, stack limit = 0x(ptrval))
[    3.368347] Stack: (0xc10f9e00 to 0xc10fa000)
[    3.372741] 9e00: c175c800 00000007 c123e000 c123e010 00000000 c077b2b0 c175c800 00000000
[    3.380950] 9e20: c123e000 c077c14c c175c800 c077d284 c175c800 c175c800 c123e000 c0799190
[    3.389190] 9e40: 00000000 c1755040 c175cb80 00000000 c123fd68 58ad940c 00000001 c123e010
[    3.397430] 9e60: 00000000 c0edaec8 00000000 00000000 c0edaec8 00000006 ffffe000 c0666728
[    3.405639] 9e80: c123e010 c0f38c28 c0f38c30 00000000 00000000 c066457c c123e010 c0edaec8
[    3.413879] 9ea0: c06649bc c0e051c8 00000000 00000000 c0efa4a0 c06648b8 00000000 c10f9ef4
[    3.422119] 9ec0: c06649bc c066298c 00000000 c1039e6c c1653738 58ad940c c123e010 c123e010
[    3.430328] 9ee0: c0e051c8 c123e054 c100f000 c0663e60 c0e03d00 c123e010 00010101 58ad940c
[    3.438568] 9f00: c12642d0 c0f02018 c12642c0 c015da48 c12642d0 c10bbf00 c1009400 c100f000
[    3.446807] 9f20: 00000000 c0153b74 c10bc800 c1009400 00000088 c10bbf00 c10bbf14 c1009400
[    3.455017] 9f40: 00000088 c1009418 c0e03d00 c1009400 ffffe000 c0153eec ffffe000 00000000
[    3.463256] 9f60: c10bbf00 00000000 c10b1ac0 c10b1c40 c10f8000 c0153ec0 c10bbf00 c10ebe94
[    3.471466] 9f80: c10b1ae4 c015a9ac 00000001 c10b1c40 c015a87c 00000000 00000000 00000000
[    3.479705] 9fa0: 00000000 00000000 00000000 c0100168 00000000 00000000 00000000 00000000
[    3.487945] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    3.496154] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[    3.504394] [<c079787c>] (omap_hsmmc_set_bus_width) from [<c07996bc>] (omap_hsmmc_set_ios+0x11c/0x258)
[    3.513763] [<c07996bc>] (omap_hsmmc_set_ios) from [<c077b2b0>] (mmc_power_up.part.8+0x3c/0xd0)
[    3.522521] [<c077b2b0>] (mmc_power_up.part.8) from [<c077c14c>] (mmc_start_host+0x88/0x9c)
[    3.530944] [<c077c14c>] (mmc_start_host) from [<c077d284>] (mmc_add_host+0x58/0x84)
[    3.538726] [<c077d284>] (mmc_add_host) from [<c0799190>] (omap_hsmmc_probe+0x5fc/0x8c0)
[    3.546874] [<c0799190>] (omap_hsmmc_probe) from [<c0666728>] (platform_drv_probe+0x48/0x98)
[    3.555358] [<c0666728>] (platform_drv_probe) from [<c066457c>] (really_probe+0x1dc/0x3b4)
[    3.563690] [<c066457c>] (really_probe) from [<c06648b8>] (driver_probe_device+0x58/0xb4)
[    3.571929] [<c06648b8>] (driver_probe_device) from [<c066298c>] (bus_for_each_drv+0x7c/0xc4)
[    3.580505] [<c066298c>] (bus_for_each_drv) from [<c0663e60>] (__device_attach_async_helper+0xa4/0xd8)
[    3.589874] [<c0663e60>] (__device_attach_async_helper) from [<c015da48>] (async_run_entry_fn+0x3c/0x1)
[    3.599487] [<c015da48>] (async_run_entry_fn) from [<c0153b74>] (process_one_work+0x228/0x574)
[    3.608154] [<c0153b74>] (process_one_work) from [<c0153eec>] (worker_thread+0x2c/0x5d0)
[    3.616302] [<c0153eec>] (worker_thread) from [<c015a9ac>] (kthread+0x130/0x144)
[    3.623748] [<c015a9ac>] (kthread) from [<c0100168>] (ret_from_fork+0x14/0x2c)

Fixes: 21b2cec61c04 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
---
 arch/arm/mach-omap2/omap_device.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index fc7bb2ca1672..13adf88d472b 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -230,10 +230,12 @@ static int _omap_device_notifier_call(struct notifier_block *nb,
 		break;
 	case BUS_NOTIFY_BIND_DRIVER:
 		od = to_omap_device(pdev);
-		if (od && (od->_state == OMAP_DEVICE_STATE_ENABLED) &&
-		    pm_runtime_status_suspended(dev)) {
+		if (od) {
 			od->_driver_status = BUS_NOTIFY_BIND_DRIVER;
-			pm_runtime_set_active(dev);
+			if ((od->_state == OMAP_DEVICE_STATE_ENABLED) &&
+			    pm_runtime_status_suspended(dev)) {
+				pm_runtime_set_active(dev);
+			}
 		}
 		break;
 	case BUS_NOTIFY_ADD_DEVICE:
-- 
2.20.1


             reply	other threads:[~2020-12-04  9:56 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-04  9:55 Andreas Kemnade [this message]
2020-12-04 14:58 ` [PATCH] ARM: OMAP2+: omap_device: fix idling of devices during probe Ulf Hansson
2020-12-04 15:44 ` Doug Anderson
2020-12-04 16:14   ` Andreas Kemnade
2020-12-04 16:42     ` Doug Anderson
2020-12-07 13:57       ` Tony Lindgren
2021-01-08 19:17         ` Adam Ford
2021-01-08 19:37           ` Andreas Kemnade
2021-01-09 16:00             ` Adam Ford

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201204095539.31705-1-andreas@kemnade.info \
    --to=andreas@kemnade.info \
    --cc=dianders@chromium.org \
    --cc=letux-kernel@openphoenux.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=tony@atomide.com \
    --cc=ulf.hansson@linaro.org \
    --cc=wsa+renesas@sang-engineering.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).