From: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
To: Li Yang <leoyang.li@nxp.com>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>
Cc: Zhao Qiang <qiang.zhao@nxp.com>,
Vladimir Oltean <vladimir.oltean@nxp.com>,
Rasmus Villemoes <rasmus.villemoes@prevas.dk>,
netdev@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 18/20] ethernet: ucc_geth: add helper to replace repeated switch statements
Date: Sat, 5 Dec 2020 20:17:41 +0100 [thread overview]
Message-ID: <20201205191744.7847-19-rasmus.villemoes@prevas.dk> (raw)
In-Reply-To: <20201205191744.7847-1-rasmus.villemoes@prevas.dk>
The translation from the ucc_geth_num_of_threads enum value to the
actual count can be written somewhat more compactly with a small
lookup table, allowing us to replace the four switch statements.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
drivers/net/ethernet/freescale/ucc_geth.c | 100 +++++-----------------
1 file changed, 22 insertions(+), 78 deletions(-)
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index 3aebea191b52..a26d1feb7dab 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -70,6 +70,20 @@ static struct {
module_param_named(debug, debug.msg_enable, int, 0);
MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., 0xffff=all)");
+static int ucc_geth_thread_count(enum ucc_geth_num_of_threads idx)
+{
+ static const u8 count[] = {
+ [UCC_GETH_NUM_OF_THREADS_1] = 1,
+ [UCC_GETH_NUM_OF_THREADS_2] = 2,
+ [UCC_GETH_NUM_OF_THREADS_4] = 4,
+ [UCC_GETH_NUM_OF_THREADS_6] = 6,
+ [UCC_GETH_NUM_OF_THREADS_8] = 8,
+ };
+ if (idx >= ARRAY_SIZE(count))
+ return 0;
+ return count[idx];
+}
+
static const struct ucc_geth_info ugeth_primary_info = {
.uf_info = {
.rtsm = UCC_FAST_SEND_IDLES_BETWEEN_FRAMES,
@@ -668,32 +682,12 @@ static void dump_regs(struct ucc_geth_private *ugeth)
in_be32(&ugeth->ug_regs->scam));
if (ugeth->p_thread_data_tx) {
- int numThreadsTxNumerical;
- switch (ugeth->ug_info->numThreadsTx) {
- case UCC_GETH_NUM_OF_THREADS_1:
- numThreadsTxNumerical = 1;
- break;
- case UCC_GETH_NUM_OF_THREADS_2:
- numThreadsTxNumerical = 2;
- break;
- case UCC_GETH_NUM_OF_THREADS_4:
- numThreadsTxNumerical = 4;
- break;
- case UCC_GETH_NUM_OF_THREADS_6:
- numThreadsTxNumerical = 6;
- break;
- case UCC_GETH_NUM_OF_THREADS_8:
- numThreadsTxNumerical = 8;
- break;
- default:
- numThreadsTxNumerical = 0;
- break;
- }
+ int count = ucc_geth_thread_count(ugeth->ug_info->numThreadsTx);
pr_info("Thread data TXs:\n");
pr_info("Base address: 0x%08x\n",
(u32)ugeth->p_thread_data_tx);
- for (i = 0; i < numThreadsTxNumerical; i++) {
+ for (i = 0; i < count; i++) {
pr_info("Thread data TX[%d]:\n", i);
pr_info("Base address: 0x%08x\n",
(u32)&ugeth->p_thread_data_tx[i]);
@@ -702,32 +696,12 @@ static void dump_regs(struct ucc_geth_private *ugeth)
}
}
if (ugeth->p_thread_data_rx) {
- int numThreadsRxNumerical;
- switch (ugeth->ug_info->numThreadsRx) {
- case UCC_GETH_NUM_OF_THREADS_1:
- numThreadsRxNumerical = 1;
- break;
- case UCC_GETH_NUM_OF_THREADS_2:
- numThreadsRxNumerical = 2;
- break;
- case UCC_GETH_NUM_OF_THREADS_4:
- numThreadsRxNumerical = 4;
- break;
- case UCC_GETH_NUM_OF_THREADS_6:
- numThreadsRxNumerical = 6;
- break;
- case UCC_GETH_NUM_OF_THREADS_8:
- numThreadsRxNumerical = 8;
- break;
- default:
- numThreadsRxNumerical = 0;
- break;
- }
+ int count = ucc_geth_thread_count(ugeth->ug_info->numThreadsRx);
pr_info("Thread data RX:\n");
pr_info("Base address: 0x%08x\n",
(u32)ugeth->p_thread_data_rx);
- for (i = 0; i < numThreadsRxNumerical; i++) {
+ for (i = 0; i < count; i++) {
pr_info("Thread data RX[%d]:\n", i);
pr_info("Base address: 0x%08x\n",
(u32)&ugeth->p_thread_data_rx[i]);
@@ -2315,45 +2289,15 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
uf_regs = uccf->uf_regs;
ug_regs = ugeth->ug_regs;
- switch (ug_info->numThreadsRx) {
- case UCC_GETH_NUM_OF_THREADS_1:
- numThreadsRxNumerical = 1;
- break;
- case UCC_GETH_NUM_OF_THREADS_2:
- numThreadsRxNumerical = 2;
- break;
- case UCC_GETH_NUM_OF_THREADS_4:
- numThreadsRxNumerical = 4;
- break;
- case UCC_GETH_NUM_OF_THREADS_6:
- numThreadsRxNumerical = 6;
- break;
- case UCC_GETH_NUM_OF_THREADS_8:
- numThreadsRxNumerical = 8;
- break;
- default:
+ numThreadsRxNumerical = ucc_geth_thread_count(ug_info->numThreadsRx);
+ if (!numThreadsRxNumerical) {
if (netif_msg_ifup(ugeth))
pr_err("Bad number of Rx threads value\n");
return -EINVAL;
}
- switch (ug_info->numThreadsTx) {
- case UCC_GETH_NUM_OF_THREADS_1:
- numThreadsTxNumerical = 1;
- break;
- case UCC_GETH_NUM_OF_THREADS_2:
- numThreadsTxNumerical = 2;
- break;
- case UCC_GETH_NUM_OF_THREADS_4:
- numThreadsTxNumerical = 4;
- break;
- case UCC_GETH_NUM_OF_THREADS_6:
- numThreadsTxNumerical = 6;
- break;
- case UCC_GETH_NUM_OF_THREADS_8:
- numThreadsTxNumerical = 8;
- break;
- default:
+ numThreadsTxNumerical = ucc_geth_thread_count(ug_info->numThreadsTx);
+ if (!numThreadsTxNumerical) {
if (netif_msg_ifup(ugeth))
pr_err("Bad number of Tx threads value\n");
return -EINVAL;
--
2.23.0
next prev parent reply other threads:[~2020-12-05 19:21 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-05 19:17 [PATCH 00/20] ethernet: ucc_geth: assorted fixes and simplifications Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 01/20] ethernet: ucc_geth: set dev->max_mtu to 1518 Rasmus Villemoes
2020-12-10 1:25 ` Andrew Lunn
2021-01-05 14:17 ` Joakim Tjernlund
2021-01-05 14:33 ` Andrew Lunn
2021-01-05 14:44 ` Joakim Tjernlund
2021-01-05 14:54 ` Andrew Lunn
2020-12-05 19:17 ` [PATCH 02/20] ethernet: ucc_geth: fix definition and size of ucc_geth_tx_global_pram Rasmus Villemoes
2020-12-08 19:14 ` Li Yang
2020-12-08 20:12 ` Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 03/20] ethernet: ucc_geth: remove unused read of temoder field Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 04/20] soc: fsl: qe: make cpm_muram_offset take a const void* argument Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 05/20] soc: fsl: qe: store muram_vbase as a void pointer instead of u8 Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 06/20] soc: fsl: qe: add cpm_muram_free_addr() helper Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 07/20] ethernet: ucc_geth: use qe_muram_free_addr() Rasmus Villemoes
2020-12-10 1:36 ` Andrew Lunn
2020-12-05 19:17 ` [PATCH 08/20] ethernet: ucc_geth: remove unnecessary memset_io() calls Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 09/20] ethernet: ucc_geth: replace kmalloc+memset by kzalloc Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 10/20] ethernet: ucc_geth: remove {rx,tx}_glbl_pram_offset from struct ucc_geth_private Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 11/20] ethernet: ucc_geth: fix use-after-free in ucc_geth_remove() Rasmus Villemoes
2020-12-05 20:48 ` Jakub Kicinski
2020-12-05 21:04 ` Rasmus Villemoes
2020-12-05 21:19 ` Jakub Kicinski
2020-12-05 21:35 ` Rasmus Villemoes
2020-12-05 21:50 ` Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 12/20] ethernet: ucc_geth: factor out parsing of {rx,tx}-clock{,-name} properties Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 13/20] ethernet: ucc_geth: constify ugeth_primary_info Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 14/20] ethernet: ucc_geth: don't statically allocate eight ucc_geth_info Rasmus Villemoes
2020-12-08 15:13 ` Christophe Leroy
2020-12-08 21:17 ` Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 15/20] ethernet: ucc_geth: use UCC_GETH_{RX,TX}_BD_RING_ALIGNMENT macros directly Rasmus Villemoes
2020-12-08 15:14 ` [PATCH 15/20] ethernet: ucc_geth: use UCC_GETH_{RX, TX}_BD_RING_ALIGNMENT " Christophe Leroy
2020-12-05 19:17 ` [PATCH 16/20] ethernet: ucc_geth: remove bd_mem_part and all associated code Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 17/20] ethernet: ucc_geth: replace kmalloc_array()+for loop by kcalloc() Rasmus Villemoes
2020-12-05 19:17 ` Rasmus Villemoes [this message]
2020-12-08 15:21 ` [PATCH 18/20] ethernet: ucc_geth: add helper to replace repeated switch statements Christophe Leroy
2020-12-08 20:55 ` Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 19/20] ethernet: ucc_geth: inform the compiler that numQueues is always 1 Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 20/20] ethernet: ucc_geth: simplify rx/tx allocations Rasmus Villemoes
2020-12-05 20:53 ` [PATCH 00/20] ethernet: ucc_geth: assorted fixes and simplifications Jakub Kicinski
2020-12-05 21:11 ` Rasmus Villemoes
2020-12-05 21:27 ` Jakub Kicinski
2020-12-05 21:36 ` Rasmus Villemoes
2020-12-10 7:52 ` Rasmus Villemoes
2020-12-08 3:07 ` Qiang Zhao
2020-12-08 8:13 ` Rasmus Villemoes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201205191744.7847-19-rasmus.villemoes@prevas.dk \
--to=rasmus.villemoes@prevas.dk \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=netdev@vger.kernel.org \
--cc=qiang.zhao@nxp.com \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).