linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org, Krzysztof Kozlowski <krzk@kernel.org>,
	Rob Herring <robh@kernel.org>, Jakub Kicinski <kuba@kernel.org>,
	Marc Kleine-Budde <mkl@pengutronix.de>
Subject: [PATCH 5.4 17/39] dt-bindings: net: correct interrupt flags in examples
Date: Sun,  6 Dec 2020 12:17:21 +0100	[thread overview]
Message-ID: <20201206111555.502900681@linuxfoundation.org> (raw)
In-Reply-To: <20201206111554.677764505@linuxfoundation.org>

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit 4d521943f76bd0d1e68ea5e02df7aadd30b2838a ]

GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW  = 1 = IRQ_TYPE_EDGE_RISING

Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
  ACTIVE_LOW  => IRQ_TYPE_LEVEL_LOW
  ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH

Fixes: a1a8b4594f8d ("NFC: pn544: i2c: Add DTS Documentation")
Fixes: 6be88670fc59 ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver")
Fixes: e3b329221567 ("dt-bindings: can: tcan4x5x: Update binding to use interrupt property")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for tcan4x5x.txt
Link: https://lore.kernel.org/r/20201026153620.89268-1-krzk@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/devicetree/bindings/net/can/tcan4x5x.txt |    2 +-
 Documentation/devicetree/bindings/net/nfc/nxp-nci.txt  |    2 +-
 Documentation/devicetree/bindings/net/nfc/pn544.txt    |    2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

--- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
+++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
@@ -33,7 +33,7 @@ tcan4x5x: tcan4x5x@0 {
 		spi-max-frequency = <10000000>;
 		bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <14 GPIO_ACTIVE_LOW>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
 		device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 		device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
--- a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
+++ b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
@@ -25,7 +25,7 @@ Example (for ARM-based BeagleBone with N
 		clock-frequency = <100000>;
 
 		interrupt-parent = <&gpio1>;
-		interrupts = <29 GPIO_ACTIVE_HIGH>;
+		interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
 
 		enable-gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
 		firmware-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
--- a/Documentation/devicetree/bindings/net/nfc/pn544.txt
+++ b/Documentation/devicetree/bindings/net/nfc/pn544.txt
@@ -25,7 +25,7 @@ Example (for ARM-based BeagleBone with P
 		clock-frequency = <400000>;
 
 		interrupt-parent = <&gpio1>;
-		interrupts = <17 GPIO_ACTIVE_HIGH>;
+		interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
 
 		enable-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 		firmware-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;



  parent reply	other threads:[~2020-12-06 11:42 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-06 11:17 [PATCH 5.4 00/39] 5.4.82-rc1 review Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 01/39] devlink: Hold rtnl lock while reading netdev attributes Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 02/39] ipv6: addrlabel: fix possible memory leak in ip6addrlbl_net_init Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 03/39] net/af_iucv: set correct sk_protocol for child sockets Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 04/39] net/tls: missing received data after fast remote close Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 05/39] net/tls: Protect from calling tls_dev_del for TLS RX twice Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 06/39] rose: Fix Null pointer dereference in rose_send_frame() Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 07/39] sock: set sk_err to ee_errno on dequeue from errq Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 08/39] tcp: Set INET_ECN_xmit configuration in tcp_reinit_congestion_control Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 09/39] tun: honor IOCB_NOWAIT flag Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 10/39] usbnet: ipheth: fix connectivity with iOS 14 Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 11/39] bonding: wait for sysfs kobject destruction before freeing struct slave Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 12/39] staging/octeon: fix up merge error Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 13/39] ima: extend boot_aggregate with kernel measurements Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 14/39] sched/fair: Fix unthrottle_cfs_rq() for leaf_cfs_rq list Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 15/39] netfilter: bridge: reset skb->pkt_type after NF_INET_POST_ROUTING traversal Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 16/39] ipv4: Fix tos mask in inet_rtm_getroute() Greg Kroah-Hartman
2020-12-06 11:17 ` Greg Kroah-Hartman [this message]
2020-12-06 11:17 ` [PATCH 5.4 18/39] chelsio/chtls: fix panic during unload reload chtls Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 19/39] ibmvnic: Ensure that SCRQ entry reads are correctly ordered Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 20/39] ibmvnic: Fix TX completion error handling Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 21/39] inet_ecn: Fix endianness of checksum update when setting ECT(1) Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 22/39] geneve: pull IP header before ECN decapsulation Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 23/39] net: ip6_gre: set dev->hard_header_len when using header_ops Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 24/39] net/x25: prevent a couple of overflows Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 25/39] cxgb3: fix error return code in t3_sge_alloc_qset() Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 26/39] net: pasemi: fix error return code in pasemi_mac_open() Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 27/39] vxlan: fix error return code in __vxlan_dev_create() Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 28/39] chelsio/chtls: fix a double free in chtls_setkey() Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 29/39] net: mvpp2: Fix error return code in mvpp2_open() Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 30/39] net: skbuff: ensure LSE is pullable before decrementing the MPLS ttl Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 31/39] net: openvswitch: ensure LSE is pullable before reading it Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 32/39] net/sched: act_mpls: " Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 33/39] net/mlx5: DR, Proper handling of unsupported Connect-X6DX SW steering Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 34/39] net/mlx5: Fix wrong address reclaim when command interface is down Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 35/39] ALSA: usb-audio: US16x08: fix value count for level meters Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 36/39] Input: xpad - support Ardwiino Controllers Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 37/39] Input: i8042 - add ByteSpeed touchpad to noloop table Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 38/39] tracing: Remove WARN_ON in start_thread() Greg Kroah-Hartman
2020-12-06 11:17 ` [PATCH 5.4 39/39] RDMA/i40iw: Address an mmap handler exploit in i40iw Greg Kroah-Hartman
2020-12-07  8:03 ` [PATCH 5.4 00/39] 5.4.82-rc1 review Naresh Kamboju
2020-12-07 15:55 ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201206111555.502900681@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=krzk@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mkl@pengutronix.de \
    --cc=robh@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).