From: Aleksander Jan Bajkowski <olek2@wp.pl>
To: hauke@hauke-m.de, andrew@lunn.ch, vivien.didelot@gmail.com,
f.fainelli@gmail.com, olteanv@gmail.com, davem@davemloft.net,
kuba@kernel.org, robh+dt@kernel.org, netdev@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Aleksander Jan Bajkowski <olek2@wp.pl>
Subject: [PATCH v2 2/2] dt-bindings: net: dsa: lantiq, lantiq-gswip: add example for xRX330
Date: Sun, 6 Dec 2020 14:27:13 +0100 [thread overview]
Message-ID: <20201206132713.13452-3-olek2@wp.pl> (raw)
In-Reply-To: <20201206132713.13452-1-olek2@wp.pl>
Add compatible string and example for xRX300 and xRX330.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
---
.../bindings/net/dsa/lantiq-gswip.txt | 110 +++++++++++++++++-
1 file changed, 109 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt b/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
index 886cbe8ffb38..7a90a6a1b065 100644
--- a/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
+++ b/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
@@ -3,7 +3,8 @@ Lantiq GSWIP Ethernet switches
Required properties for GSWIP core:
-- compatible : "lantiq,xrx200-gswip" for the embedded GSWIP in the
+- compatible : "lantiq,xrx200-gswip", "lantiq,xrx300-gswip" or
+ "lantiq,xrx330-gswip" for the embedded GSWIP in the
xRX200 SoC
- reg : memory range of the GSWIP core registers
: memory range of the GSWIP MDIO registers
@@ -141,3 +142,110 @@ switch@e108000 {
};
};
};
+
+Ethernet switch on the GRX330 SoC:
+
+switch@e108000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx300-gswip";
+ reg = < 0xe108000 0x3100 /* switch */
+ 0xe10b100 0xd8 /* mdio */
+ 0xe10b1d8 0x130 /* mii */
+ >;
+ dsa,member = <0 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ phy-mode = "internal";
+ phy-handle = <&phy1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ phy-mode = "internal";
+ phy-handle = <&phy2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ phy-mode = "internal";
+ phy-handle = <&phy3>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan4";
+ phy-mode = "internal";
+ phy-handle = <&phy4>;
+ };
+
+ port@6 {
+ reg = <0x6>;
+ label = "cpu";
+ ethernet = <ð0>;
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+ reg = <0>;
+
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ phy2: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+ phy3: ethernet-phy@3 {
+ reg = <0x3>;
+ };
+ phy4: ethernet-phy@4 {
+ reg = <0x4>;
+ };
+ };
+
+ gphy-fw {
+ compatible = "lantiq,xrx330-gphy-fw", "lantiq,gphy-fw";
+ lantiq,rcu = <&rcu0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gphy@20 {
+ reg = <0x20>;
+
+ resets = <&reset0 31 30>;
+ reset-names = "gphy";
+ };
+
+ gphy@68 {
+ reg = <0x68>;
+
+ resets = <&reset0 29 28>;
+ reset-names = "gphy";
+ };
+
+ gphy@ac {
+ reg = <0xac>;
+
+ resets = <&reset0 28 13>;
+ reset-names = "gphy";
+ };
+
+ gphy@264 {
+ reg = <0x264>;
+
+ resets = <&reset0 10 10>;
+ reset-names = "gphy";
+ };
+ };
+};
--
2.20.1
next prev parent reply other threads:[~2020-12-06 13:29 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-06 13:27 [PATCH v2 0/2] net: dsa: lantiq: add support for xRX300 and xRX330 Aleksander Jan Bajkowski
2020-12-06 13:27 ` [PATCH v2 1/2] net: dsa: lantiq: allow to use all GPHYs on " Aleksander Jan Bajkowski
2020-12-06 18:54 ` Vladimir Oltean
2020-12-07 21:43 ` Jakub Kicinski
2020-12-06 13:27 ` Aleksander Jan Bajkowski [this message]
2020-12-10 3:40 ` [PATCH v2 2/2] dt-bindings: net: dsa: lantiq, lantiq-gswip: add example for xRX330 Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201206132713.13452-3-olek2@wp.pl \
--to=olek2@wp.pl \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=hauke@hauke-m.de \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=robh+dt@kernel.org \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).