From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-17.0 required=3.0 tests=BAYES_00,INCLUDES_CR_TRAILER, INCLUDES_PATCH,MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id C9688C3526A for ; Tue, 8 Dec 2020 06:48:16 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 985CA23A6C for ; Tue, 8 Dec 2020 06:48:16 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727080AbgLHGsP (ORCPT ); Tue, 8 Dec 2020 01:48:15 -0500 Received: from mail.kernel.org ([198.145.29.99]:57582 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726069AbgLHGsO (ORCPT ); Tue, 8 Dec 2020 01:48:14 -0500 From: Vinod Koul Authentication-Results: mail.kernel.org; dkim=permerror (bad message/signature format) To: Stephen Boyd Cc: linux-arm-msm@vger.kernel.org, Bjorn Andersson , Vivek Aknurwar , Andy Gross , Michael Turquette , Rob Herring , Taniya Das , linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Jeevan Shriram , Vinod Koul Subject: [PATCH v2 4/5] clk: qcom: clk-alpha-pll: Add support for Lucid 5LPE PLL Date: Tue, 8 Dec 2020 12:17:01 +0530 Message-Id: <20201208064702.3654324-5-vkoul@kernel.org> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20201208064702.3654324-1-vkoul@kernel.org> References: <20201208064702.3654324-1-vkoul@kernel.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Vivek Aknurwar Lucid 5LPE is a slightly different Lucid PLL with different offsets and porgramming sequence so add support for these Signed-off-by: Vivek Aknurwar Signed-off-by: Jeevan Shriram [vkoul: rebase and tidy up for upstream] Signed-off-by: Vinod Koul --- drivers/clk/qcom/clk-alpha-pll.c | 223 +++++++++++++++++++++++++++++++ drivers/clk/qcom/clk-alpha-pll.h | 4 + 2 files changed, 227 insertions(+) diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c index 564431130a76..6a399663d564 100644 --- a/drivers/clk/qcom/clk-alpha-pll.c +++ b/drivers/clk/qcom/clk-alpha-pll.c @@ -146,6 +146,12 @@ EXPORT_SYMBOL_GPL(clk_alpha_pll_regs); /* LUCID PLL specific settings and offsets */ #define LUCID_PCAL_DONE BIT(27) +/* LUCID 5LPE PLL specific settings and offsets */ +#define LUCID_5LPE_PCAL_DONE BIT(11) +#define LUCID_5LPE_ENABLE_VOTE_RUN BIT(21) +#define LUCID_5LPE_PLL_LATCH_INPUT BIT(14) +#define LUCID_5LPE_ALPHA_PLL_ACK_LATCH BIT(13) + #define pll_alpha_width(p) \ ((PLL_ALPHA_VAL_U(p) - PLL_ALPHA_VAL(p) == 4) ? \ ALPHA_REG_BITWIDTH : ALPHA_REG_16BIT_WIDTH) @@ -1561,3 +1567,220 @@ const struct clk_ops clk_alpha_pll_postdiv_lucid_ops = { .set_rate = clk_alpha_pll_postdiv_fabia_set_rate, }; EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_lucid_ops); + +static int alpha_pll_lucid_5lpe_enable(struct clk_hw *hw) +{ + struct clk_alpha_pll *pll = to_clk_alpha_pll(hw); + u32 val; + int ret; + + ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val); + if (ret) + return ret; + + /* If in FSM mode, just vote for it */ + if (val & LUCID_5LPE_ENABLE_VOTE_RUN) { + ret = clk_enable_regmap(hw); + if (ret) + return ret; + return wait_for_pll_enable_lock(pll); + } + + /* Check if PLL is already enabled */ + ret = trion_pll_is_enabled(pll, pll->clkr.regmap); + if (ret < 0) + return ret; + + ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N); + if (ret) + return ret; + + /* Set operation mode to RUN */ + regmap_write(pll->clkr.regmap, PLL_OPMODE(pll), PLL_RUN); + + ret = wait_for_pll_enable_lock(pll); + if (ret) + return ret; + + /* Enable the PLL outputs */ + ret = regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, PLL_OUT_MASK); + if (ret) + return ret; + + /* Enable the global PLL outputs */ + ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_OUTCTRL, PLL_OUTCTRL); + if (ret) + return ret; + + /* Ensure that the write above goes through before returning. */ + mb(); + return ret; +} + +static void alpha_pll_lucid_5lpe_disable(struct clk_hw *hw) +{ + struct clk_alpha_pll *pll = to_clk_alpha_pll(hw); + u32 val; + int ret; + + ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val); + if (ret) + return; + + /* If in FSM mode, just unvote it */ + if (val & LUCID_5LPE_ENABLE_VOTE_RUN) { + clk_disable_regmap(hw); + return; + } + + /* Disable the global PLL output */ + ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_OUTCTRL, 0); + if (ret) + return; + + /* Disable the PLL outputs */ + ret = regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, 0); + if (ret) + return; + + /* Place the PLL mode in STANDBY */ + regmap_write(pll->clkr.regmap, PLL_OPMODE(pll), PLL_STANDBY); +} + +/* + * The Lucid 5LPE PLL requires a power-on self-calibration which happens + * when the PLL comes out of reset. Calibrate in case it is not completed. + */ +static int alpha_pll_lucid_5lpe_prepare(struct clk_hw *hw) +{ + struct clk_alpha_pll *pll = to_clk_alpha_pll(hw); + struct clk_hw *p; + u32 regval; + int ret; + + /* Return early if calibration is not needed. */ + regmap_read(pll->clkr.regmap, PLL_MODE(pll), ®val); + if (regval & LUCID_5LPE_PCAL_DONE) + return 0; + + p = clk_hw_get_parent(hw); + if (!p) + return -EINVAL; + + ret = alpha_pll_lucid_5lpe_enable(hw); + if (ret) + return ret; + + alpha_pll_lucid_5lpe_disable(hw); + + return 0; +} + +static int alpha_pll_lucid_5lpe_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long prate) +{ + struct clk_alpha_pll *pll = to_clk_alpha_pll(hw); + unsigned long rrate; + u32 regval, l; + u64 a; + int ret; + + rrate = alpha_pll_round_rate(rate, prate, &l, &a, ALPHA_REG_16BIT_WIDTH); + + /* + * Due to a limited number of bits for fractional rate programming, the + * rounded up rate could be marginally higher than the requested rate. + */ + if (rrate > (rate + PLL_RATE_MARGIN) || rrate < rate) { + pr_err("Call set rate on the PLL with rounded rates!\n"); + return -EINVAL; + } + + regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l); + regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a); + + /* Latch the PLL input */ + ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), + LUCID_5LPE_PLL_LATCH_INPUT, LUCID_5LPE_PLL_LATCH_INPUT); + if (ret) + return ret; + + /* Wait for 2 reference cycles before checking the ACK bit. */ + udelay(1); + regmap_read(pll->clkr.regmap, PLL_MODE(pll), ®val); + if (!(regval & LUCID_5LPE_ALPHA_PLL_ACK_LATCH)) { + pr_err("Lucid 5LPE PLL latch failed. Output may be unstable!\n"); + return -EINVAL; + } + + /* Return the latch input to 0 */ + ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), LUCID_5LPE_PLL_LATCH_INPUT, 0); + if (ret) + return ret; + + if (clk_hw_is_enabled(hw)) { + ret = wait_for_pll_enable_lock(pll); + if (ret) + return ret; + } + + /* Wait for PLL output to stabilize */ + udelay(100); + return 0; +} + +static int clk_lucid_5lpe_pll_postdiv_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw); + int i, val = 0, div, ret; + + /* + * If the PLL is in FSM mode, then treat set_rate callback as a + * no-operation. + */ + ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val); + if (ret) + return ret; + + if (val & LUCID_5LPE_ENABLE_VOTE_RUN) + return 0; + + if (!pll->post_div_table) { + pr_err("Missing the post_div_table for the PLL\n"); + return -EINVAL; + } + + div = DIV_ROUND_UP_ULL((u64)parent_rate, rate); + for (i = 0; i < pll->num_post_div; i++) { + if (pll->post_div_table[i].div == div) { + val = pll->post_div_table[i].val; + break; + } + } + + return regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), + (BIT(pll->width) - 1) << pll->post_div_shift, + val << pll->post_div_shift); +} + +const struct clk_ops clk_alpha_pll_lucid_5lpe_ops = { + .prepare = alpha_pll_lucid_5lpe_prepare, + .enable = alpha_pll_lucid_5lpe_enable, + .disable = alpha_pll_lucid_5lpe_disable, + .set_rate = alpha_pll_lucid_5lpe_set_rate, +}; +EXPORT_SYMBOL_GPL(clk_alpha_pll_lucid_5lpe_ops); + +const struct clk_ops clk_alpha_pll_fixed_lucid_5lpe_ops = { + .enable = alpha_pll_lucid_5lpe_enable, + .disable = alpha_pll_lucid_5lpe_disable, +}; +EXPORT_SYMBOL_GPL(clk_alpha_pll_fixed_lucid_5lpe_ops); + +const struct clk_ops clk_alpha_pll_postdiv_lucid_5lpe_ops = { + .recalc_rate = clk_alpha_pll_postdiv_fabia_recalc_rate, + .round_rate = clk_alpha_pll_postdiv_fabia_round_rate, + .set_rate = clk_lucid_5lpe_pll_postdiv_set_rate, +}; +EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_lucid_5lpe_ops); diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h index d3201b87c0cd..d983b1aab8c8 100644 --- a/drivers/clk/qcom/clk-alpha-pll.h +++ b/drivers/clk/qcom/clk-alpha-pll.h @@ -142,6 +142,10 @@ extern const struct clk_ops clk_alpha_pll_lucid_ops; #define clk_alpha_pll_fixed_lucid_ops clk_alpha_pll_fixed_trion_ops extern const struct clk_ops clk_alpha_pll_postdiv_lucid_ops; +extern const struct clk_ops clk_alpha_pll_lucid_5lpe_ops; +extern const struct clk_ops clk_alpha_pll_fixed_lucid_5lpe_ops; +extern const struct clk_ops clk_alpha_pll_postdiv_lucid_5lpe_ops; + void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap, const struct alpha_pll_config *config); void clk_fabia_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap, -- 2.26.2