[PATCH 4.19 00/39] 4.19.163-rc1 review

[PATCH 4.19 00/39] 4.19.163-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.19.163 release.
There are 39 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sat, 12 Dec 2020 14:25:47 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.163-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.19.163-rc1

Masami Hiramatsu <mhiramat@kernel.org>
    x86/insn-eval: Use new for_each_insn_prefix() macro to loop over prefixes bytes

Florian Westphal <fw@strlen.de>
    netfilter: nf_tables: avoid false-postive lockdep splat

Luo Meng <luomeng12@huawei.com>
    Input: i8042 - fix error return code in i8042_setup_aux()

Mike Snitzer <snitzer@redhat.com>
    dm writecache: remove BUG() and fail gracefully instead

Zhihao Cheng <chengzhihao1@huawei.com>
    i2c: qup: Fix error return code in qup_i2c_bam_schedule_desc()

Bob Peterson <rpeterso@redhat.com>
    gfs2: check for empty rgrp tree in gfs2_ri_update

Steven Rostedt (VMware) <rostedt@goodmis.org>
    tracing: Fix userstacktrace option for instances

Peter Ujfalusi <peter.ujfalusi@ti.com>
    spi: bcm2835: Release the DMA channel if probe fails after dma_init

Lukas Wunner <lukas@wunner.de>
    spi: bcm2835: Fix use-after-free on unbind

Lukas Wunner <lukas@wunner.de>
    spi: bcm-qspi: Fix use-after-free on unbind

Lukas Wunner <lukas@wunner.de>
    spi: Introduce device-managed SPI controller allocation

Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
    iommu/amd: Set DTE[IntTabLen] to represent 512 IRTEs

Samuel Thibault <samuel.thibault@ens-lyon.org>
    speakup: Reject setting the speakup line discipline outside of speakup

Christian Eggers <ceggers@arri.de>
    i2c: imx: Check for I2SR_IAL after every byte

Christian Eggers <ceggers@arri.de>
    i2c: imx: Fix reset of I2SR_IAL flag

Masami Hiramatsu <mhiramat@kernel.org>
    x86/uprobes: Do not use prefixes.nbytes when looping over prefixes.bytes

Qian Cai <qcai@redhat.com>
    mm/swapfile: do not sleep with a spin lock held

Yang Shi <shy828301@gmail.com>
    mm: list_lru: set shrinker map bit when child nr_items is not zero

Mike Snitzer <snitzer@redhat.com>
    dm: remove invalid sparse __acquires and __releases annotations

Mikulas Patocka <mpatocka@redhat.com>
    dm writecache: fix the maximum number of arguments

Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
    scsi: mpt3sas: Fix ioctl timeout

Christian Eggers <ceggers@arri.de>
    i2c: imx: Don't generate STOP condition if arbitration has been lost

Paulo Alcantara <pc@cjr.nz>
    cifs: fix potential use-after-free in cifs_echo_request()

Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
    ftrace: Fix updating FTRACE_FL_TRAMP

Takashi Iwai <tiwai@suse.de>
    ALSA: hda/generic: Add option to enforce preferred_dacs pairs

Kailang Yang <kailang@realtek.com>
    ALSA: hda/realtek - Add new codec supported for ALC897

Jian-Hong Pan <jhp@endlessos.org>
    ALSA: hda/realtek: Enable headset of ASUS UX482EG & B9400CEA with ALC294

Takashi Iwai <tiwai@suse.de>
    ALSA: hda/realtek: Add mute LED quirk to yet another HP x360 model

Jann Horn <jannh@google.com>
    tty: Fix ->session locking

Jann Horn <jannh@google.com>
    tty: Fix ->pgrp locking in tiocspgrp()

Bjørn Mork <bjorn@mork.no>
    USB: serial: option: fix Quectel BG96 matching

Giacinto Cifelli <gciofono@gmail.com>
    USB: serial: option: add support for Thales Cinterion EXS82

Vincent Palatin <vpalatin@chromium.org>
    USB: serial: option: add Fibocom NL668 variants

Johan Hovold <johan@kernel.org>
    USB: serial: ch341: sort device-id entries

Jan-Niklas Burfeind <kernel@aiyionpri.me>
    USB: serial: ch341: add new Product ID for CH341A

Johan Hovold <johan@kernel.org>
    USB: serial: kl5kusb105: fix memleak on open

Vamsi Krishna Samavedam <vskrishn@codeaurora.org>
    usb: gadget: f_fs: Use local copy of descriptors for userspace copy

Hans de Goede <hdegoede@redhat.com>
    pinctrl: baytrail: Fix pin being driven low for a while on gpiod_get(..., GPIOD_OUT_HIGH)

Hans de Goede <hdegoede@redhat.com>
    pinctrl: baytrail: Replace WARN with dev_info_once when setting direct-irq pin to output


-------------

Diffstat:

 Makefile                                  |  4 +-
 arch/x86/include/asm/insn.h               | 15 +++++++
 arch/x86/kernel/uprobes.c                 | 10 +++--
 arch/x86/lib/insn-eval.c                  |  5 ++-
 drivers/i2c/busses/i2c-imx.c              | 42 +++++++++++++++----
 drivers/i2c/busses/i2c-qup.c              |  3 +-
 drivers/input/serio/i8042.c               |  3 +-
 drivers/iommu/amd_iommu_types.h           |  2 +-
 drivers/md/dm-writecache.c                |  4 +-
 drivers/md/dm.c                           |  2 -
 drivers/pinctrl/intel/pinctrl-baytrail.c  | 67 ++++++++++++++++++++++++-------
 drivers/scsi/mpt3sas/mpt3sas_ctl.c        |  2 +-
 drivers/spi/spi-bcm-qspi.c                | 34 ++++++----------
 drivers/spi/spi-bcm2835.c                 | 22 +++++-----
 drivers/spi/spi.c                         | 58 +++++++++++++++++++++++++-
 drivers/staging/speakup/spk_ttyio.c       | 37 ++++++++++-------
 drivers/tty/tty_io.c                      |  7 +++-
 drivers/tty/tty_jobctrl.c                 | 44 ++++++++++++++------
 drivers/usb/gadget/function/f_fs.c        |  6 ++-
 drivers/usb/serial/ch341.c                |  5 ++-
 drivers/usb/serial/kl5kusb105.c           | 10 ++---
 drivers/usb/serial/option.c               | 10 +++--
 fs/cifs/connect.c                         |  2 +
 fs/gfs2/rgrp.c                            |  4 ++
 include/linux/spi/spi.h                   | 19 +++++++++
 include/linux/tty.h                       |  4 ++
 kernel/trace/ftrace.c                     | 22 +++++++++-
 kernel/trace/trace.c                      |  7 ++--
 kernel/trace/trace.h                      |  6 ++-
 mm/list_lru.c                             | 10 ++---
 mm/swapfile.c                             |  4 +-
 net/netfilter/nf_tables_api.c             |  3 +-
 sound/pci/hda/hda_generic.c               | 12 ++++--
 sound/pci/hda/hda_generic.h               |  1 +
 sound/pci/hda/patch_realtek.c             |  6 +++
 tools/objtool/arch/x86/include/asm/insn.h | 15 +++++++
 tools/perf/util/intel-pt-decoder/insn.h   | 15 +++++++
 37 files changed, 390 insertions(+), 132 deletions(-)

[PATCH 4.19 01/39] pinctrl: baytrail: Replace WARN with dev_info_once when setting direct-irq pin to output

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

commit e2b74419e5cc7cfc58f3e785849f73f8fa0af5b3 upstream

Suspending Goodix touchscreens requires changing the interrupt pin to
output before sending them a power-down command. Followed by wiggling
the interrupt pin to wake the device up, after which it is put back
in input mode.

On Cherry Trail device the interrupt pin is listed as a GpioInt ACPI
resource so we can do this without problems as long as we release the
IRQ before changing the pin to output mode.

On Bay Trail devices with a Goodix touchscreen direct-irq mode is used
in combination with listing the pin as a normal GpioIo resource. This
works fine, but this triggers the WARN in byt_gpio_set_direction-s output
path because direct-irq support is enabled on the pin.

This commit replaces the WARN call with a dev_info_once call, fixing a
bunch of WARN splats in dmesg on each suspend/resume cycle.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/intel/pinctrl-baytrail.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/pinctrl/intel/pinctrl-baytrail.c b/drivers/pinctrl/intel/pinctrl-baytrail.c
index acb02a7aa9496..7d6685ae31d70 100644
--- a/drivers/pinctrl/intel/pinctrl-baytrail.c
+++ b/drivers/pinctrl/intel/pinctrl-baytrail.c
@@ -1026,15 +1026,15 @@ static int byt_gpio_set_direction(struct pinctrl_dev *pctl_dev,
 	value &= ~BYT_DIR_MASK;
 	if (input)
 		value |= BYT_OUTPUT_EN;
-	else
+	else if (readl(conf_reg) & BYT_DIRECT_IRQ_EN)
 		/*
 		 * Before making any direction modifications, do a check if gpio
 		 * is set for direct IRQ.  On baytrail, setting GPIO to output
-		 * does not make sense, so let's at least warn the caller before
+		 * does not make sense, so let's at least inform the caller before
 		 * they shoot themselves in the foot.
 		 */
-		WARN(readl(conf_reg) & BYT_DIRECT_IRQ_EN,
-		     "Potential Error: Setting GPIO with direct_irq_en to output");
+		dev_info_once(vg->dev, "Potential Error: Setting GPIO with direct_irq_en to output");
+
 	writel(value, val_reg);
 
 	raw_spin_unlock_irqrestore(&byt_lock, flags);
-- 
2.27.0

[PATCH 4.19 02/39] pinctrl: baytrail: Fix pin being driven low for a while on gpiod_get(..., GPIOD_OUT_HIGH)

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

commit 156abe2961601d60a8c2a60c6dc8dd6ce7adcdaf upstream

The pins on the Bay Trail SoC have separate input-buffer and output-buffer
enable bits and a read of the level bit of the value register will always
return the value from the input-buffer.

The BIOS of a device may configure a pin in output-only mode, only enabling
the output buffer, and write 1 to the level bit to drive the pin high.
This 1 written to the level bit will be stored inside the data-latch of the
output buffer.

But a subsequent read of the value register will return 0 for the level bit
because the input-buffer is disabled. This causes a read-modify-write as
done by byt_gpio_set_direction() to write 0 to the level bit, driving the
pin low!

Before this commit byt_gpio_direction_output() relied on
pinctrl_gpio_direction_output() to set the direction, followed by a call
to byt_gpio_set() to apply the selected value. This causes the pin to
go low between the pinctrl_gpio_direction_output() and byt_gpio_set()
calls.

Change byt_gpio_direction_output() to directly make the register
modifications itself instead. Replacing the 2 subsequent writes to the
value register with a single write.

Note that the pinctrl code does not keep track internally of the direction,
so not going through pinctrl_gpio_direction_output() is not an issue.

This issue was noticed on a Trekstor SurfTab Twin 10.1. When the panel is
already on at boot (no external monitor connected), then the i915 driver
does a gpiod_get(..., GPIOD_OUT_HIGH) for the panel-enable GPIO. The
temporarily going low of that GPIO was causing the panel to reset itself
after which it would not show an image until it was turned off and back on
again (until a full modeset was done on it). This commit fixes this.

This commit also updates the byt_gpio_direction_input() to use direct
register accesses instead of going through pinctrl_gpio_direction_input(),
to keep it consistent with byt_gpio_direction_output().

Note for backporting, this commit depends on:
commit e2b74419e5cc ("pinctrl: baytrail: Replace WARN with dev_info_once
when setting direct-irq pin to output")

Cc: stable@vger.kernel.org
Fixes: 86e3ef812fe3 ("pinctrl: baytrail: Update gpio chip operations")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[sudip: use byt_gpio and vg->pdev->dev for dev_info()]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/intel/pinctrl-baytrail.c | 67 +++++++++++++++++++-----
 1 file changed, 53 insertions(+), 14 deletions(-)

diff --git a/drivers/pinctrl/intel/pinctrl-baytrail.c b/drivers/pinctrl/intel/pinctrl-baytrail.c
index 7d6685ae31d70..1b00a3f3b419c 100644
--- a/drivers/pinctrl/intel/pinctrl-baytrail.c
+++ b/drivers/pinctrl/intel/pinctrl-baytrail.c
@@ -1009,6 +1009,21 @@ static void byt_gpio_disable_free(struct pinctrl_dev *pctl_dev,
 	pm_runtime_put(&vg->pdev->dev);
 }
 
+static void byt_gpio_direct_irq_check(struct byt_gpio *vg,
+				      unsigned int offset)
+{
+	void __iomem *conf_reg = byt_gpio_reg(vg, offset, BYT_CONF0_REG);
+
+	/*
+	 * Before making any direction modifications, do a check if gpio is set
+	 * for direct IRQ. On Bay Trail, setting GPIO to output does not make
+	 * sense, so let's at least inform the caller before they shoot
+	 * themselves in the foot.
+	 */
+	if (readl(conf_reg) & BYT_DIRECT_IRQ_EN)
+		dev_info_once(&vg->pdev->dev, "Potential Error: Setting GPIO with direct_irq_en to output");
+}
+
 static int byt_gpio_set_direction(struct pinctrl_dev *pctl_dev,
 				  struct pinctrl_gpio_range *range,
 				  unsigned int offset,
@@ -1016,7 +1031,6 @@ static int byt_gpio_set_direction(struct pinctrl_dev *pctl_dev,
 {
 	struct byt_gpio *vg = pinctrl_dev_get_drvdata(pctl_dev);
 	void __iomem *val_reg = byt_gpio_reg(vg, offset, BYT_VAL_REG);
-	void __iomem *conf_reg = byt_gpio_reg(vg, offset, BYT_CONF0_REG);
 	unsigned long flags;
 	u32 value;
 
@@ -1026,14 +1040,8 @@ static int byt_gpio_set_direction(struct pinctrl_dev *pctl_dev,
 	value &= ~BYT_DIR_MASK;
 	if (input)
 		value |= BYT_OUTPUT_EN;
-	else if (readl(conf_reg) & BYT_DIRECT_IRQ_EN)
-		/*
-		 * Before making any direction modifications, do a check if gpio
-		 * is set for direct IRQ.  On baytrail, setting GPIO to output
-		 * does not make sense, so let's at least inform the caller before
-		 * they shoot themselves in the foot.
-		 */
-		dev_info_once(vg->dev, "Potential Error: Setting GPIO with direct_irq_en to output");
+	else
+		byt_gpio_direct_irq_check(vg, offset);
 
 	writel(value, val_reg);
 
@@ -1374,19 +1382,50 @@ static int byt_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
 
 static int byt_gpio_direction_input(struct gpio_chip *chip, unsigned int offset)
 {
-	return pinctrl_gpio_direction_input(chip->base + offset);
+	struct byt_gpio *vg = gpiochip_get_data(chip);
+	void __iomem *val_reg = byt_gpio_reg(vg, offset, BYT_VAL_REG);
+	unsigned long flags;
+	u32 reg;
+
+	raw_spin_lock_irqsave(&byt_lock, flags);
+
+	reg = readl(val_reg);
+	reg &= ~BYT_DIR_MASK;
+	reg |= BYT_OUTPUT_EN;
+	writel(reg, val_reg);
+
+	raw_spin_unlock_irqrestore(&byt_lock, flags);
+	return 0;
 }
 
+/*
+ * Note despite the temptation this MUST NOT be converted into a call to
+ * pinctrl_gpio_direction_output() + byt_gpio_set() that does not work this
+ * MUST be done as a single BYT_VAL_REG register write.
+ * See the commit message of the commit adding this comment for details.
+ */
 static int byt_gpio_direction_output(struct gpio_chip *chip,
 				     unsigned int offset, int value)
 {
-	int ret = pinctrl_gpio_direction_output(chip->base + offset);
+	struct byt_gpio *vg = gpiochip_get_data(chip);
+	void __iomem *val_reg = byt_gpio_reg(vg, offset, BYT_VAL_REG);
+	unsigned long flags;
+	u32 reg;
 
-	if (ret)
-		return ret;
+	raw_spin_lock_irqsave(&byt_lock, flags);
 
-	byt_gpio_set(chip, offset, value);
+	byt_gpio_direct_irq_check(vg, offset);
 
+	reg = readl(val_reg);
+	reg &= ~BYT_DIR_MASK;
+	if (value)
+		reg |= BYT_LEVEL;
+	else
+		reg &= ~BYT_LEVEL;
+
+	writel(reg, val_reg);
+
+	raw_spin_unlock_irqrestore(&byt_lock, flags);
 	return 0;
 }
 
-- 
2.27.0

[PATCH 4.19 03/39] usb: gadget: f_fs: Use local copy of descriptors for userspace copy

[Greg Kroah-Hartman]

From: Vamsi Krishna Samavedam <vskrishn@codeaurora.org>

commit a4b98a7512f18534ce33a7e98e49115af59ffa00 upstream.

The function may be unbound causing the ffs_ep and its descriptors
to be freed while userspace is in the middle of an ioctl requesting
the same descriptors. Avoid dangling pointer reference by first
making a local copy of desctiptors before releasing the spinlock.

Fixes: c559a3534109 ("usb: gadget: f_fs: add ioctl returning ep descriptor")
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Vamsi Krishna Samavedam <vskrishn@codeaurora.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201130203453.28154-1-jackp@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/function/f_fs.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -1243,7 +1243,7 @@ static long ffs_epfile_ioctl(struct file
 	case FUNCTIONFS_ENDPOINT_DESC:
 	{
 		int desc_idx;
-		struct usb_endpoint_descriptor *desc;
+		struct usb_endpoint_descriptor desc1, *desc;
 
 		switch (epfile->ffs->gadget->speed) {
 		case USB_SPEED_SUPER:
@@ -1255,10 +1255,12 @@ static long ffs_epfile_ioctl(struct file
 		default:
 			desc_idx = 0;
 		}
+
 		desc = epfile->ep->descs[desc_idx];
+		memcpy(&desc1, desc, desc->bLength);
 
 		spin_unlock_irq(&epfile->ffs->eps_lock);
-		ret = copy_to_user((void __user *)value, desc, desc->bLength);
+		ret = copy_to_user((void __user *)value, &desc1, desc1.bLength);
 		if (ret)
 			ret = -EFAULT;
 		return ret;

[PATCH 4.19 04/39] USB: serial: kl5kusb105: fix memleak on open

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 3f203f057edfcf6bd02c6b942799262bfcf31f73 upstream.

Fix memory leak of control-message transfer buffer on successful open().

Fixes: 6774d5f53271 ("USB: serial: kl5kusb105: fix open error path")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/kl5kusb105.c |   10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -276,12 +276,12 @@ static int  klsi_105_open(struct tty_str
 	priv->cfg.unknown2 = cfg->unknown2;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
+	kfree(cfg);
+
 	/* READ_ON and urb submission */
 	rc = usb_serial_generic_open(tty, port);
-	if (rc) {
-		retval = rc;
-		goto err_free_cfg;
-	}
+	if (rc)
+		return rc;
 
 	rc = usb_control_msg(port->serial->dev,
 			     usb_sndctrlpipe(port->serial->dev, 0),
@@ -324,8 +324,6 @@ err_disable_read:
 			     KLSI_TIMEOUT);
 err_generic_close:
 	usb_serial_generic_close(port);
-err_free_cfg:
-	kfree(cfg);
 
 	return retval;
 }

[PATCH 4.19 05/39] USB: serial: ch341: add new Product ID for CH341A

[Greg Kroah-Hartman]

From: Jan-Niklas Burfeind <kernel@aiyionpri.me>

commit 46ee4abb10a07bd8f8ce910ee6b4ae6a947d7f63 upstream.

Add PID for CH340 that's found on a ch341 based Programmer made by keeyees.
The specific device that contains the serial converter is described
here: http://www.keeyees.com/a/Products/ej/36.html

The driver works flawlessly as soon as the new PID (0x5512) is added to
it.

Signed-off-by: Jan-Niklas Burfeind <kernel@aiyionpri.me>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/ch341.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -83,6 +83,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x4348, 0x5523) },
 	{ USB_DEVICE(0x1a86, 0x7522) },
 	{ USB_DEVICE(0x1a86, 0x7523) },
+	{ USB_DEVICE(0x1a86, 0x5512) },
 	{ USB_DEVICE(0x1a86, 0x5523) },
 	{ },
 };

[PATCH 4.19 06/39] USB: serial: ch341: sort device-id entries

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit bf193bfc12dbc3754fc8a6e0e1e3702f1af2f772 upstream.

Keep the device-id entries sorted to make it easier to add new ones in
the right spot.

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/ch341.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -80,11 +80,11 @@
 #define CH341_LCR_CS5          0x00
 
 static const struct usb_device_id id_table[] = {
-	{ USB_DEVICE(0x4348, 0x5523) },
-	{ USB_DEVICE(0x1a86, 0x7522) },
-	{ USB_DEVICE(0x1a86, 0x7523) },
 	{ USB_DEVICE(0x1a86, 0x5512) },
 	{ USB_DEVICE(0x1a86, 0x5523) },
+	{ USB_DEVICE(0x1a86, 0x7522) },
+	{ USB_DEVICE(0x1a86, 0x7523) },
+	{ USB_DEVICE(0x4348, 0x5523) },
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);

[PATCH 4.19 07/39] USB: serial: option: add Fibocom NL668 variants

[Greg Kroah-Hartman]

From: Vincent Palatin <vpalatin@chromium.org>

commit 5e4d659b10fde14403adb2e215df4a3168fe8465 upstream.

Update the USB serial option driver support for the Fibocom NL668 Cat.4
LTE modules as there are actually several different variants.
Got clarifications from Fibocom, there are distinct products:
- VID:PID 1508:1001, NL668 for IOT (no MBIM interface)
- VID:PID 2cb7:01a0, NL668-AM and NL652-EU are laptop M.2 cards (with
  MBIM interfaces for Windows/Linux/Chrome OS), respectively for Americas
  and Europe.

usb-devices output for the laptop M.2 cards:
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  4 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2cb7 ProdID=01a0 Rev=03.18
S:  Manufacturer=Fibocom Wireless Inc.
S:  Product=Fibocom NL652-EU Modem
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2046,12 +2046,13 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
 	{ USB_DEVICE(0x0489, 0xe0b5),						/* Foxconn T77W968 ESIM */
 	  .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
-	{ USB_DEVICE(0x1508, 0x1001),						/* Fibocom NL668 */
+	{ USB_DEVICE(0x1508, 0x1001),						/* Fibocom NL668 (IOT version) */
 	  .driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
 	{ USB_DEVICE(0x2cb7, 0x0104),						/* Fibocom NL678 series */
 	  .driver_info = RSVD(4) | RSVD(5) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff),			/* Fibocom NL678 series */
 	  .driver_info = RSVD(6) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) },			/* Fibocom NL668-AM/NL652-EU (laptop MBIM) */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) },			/* GosunCn GM500 RNDIS */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) },			/* GosunCn GM500 MBIM */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) },			/* GosunCn GM500 ECM/NCM */

[PATCH 4.19 08/39] USB: serial: option: add support for Thales Cinterion EXS82

[Greg Kroah-Hartman]

From: Giacinto Cifelli <gciofono@gmail.com>

commit 6d6556c04ebaeaf4e7fa8b791c97e2a7c41b38a3 upstream.

There is a single option port in this modem, and it is used as debug port.

lsusb -v for this device:

Bus 001 Device 002: ID 1e2d:006c
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass          239 Miscellaneous Device
  bDeviceSubClass         2 ?
  bDeviceProtocol         1 Interface Association
  bMaxPacketSize0        64
  idVendor           0x1e2d
  idProduct          0x006c
  bcdDevice            0.00
  iManufacturer           4
  iProduct                3
  iSerial                 5
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength          243
    bNumInterfaces          7
    bConfigurationValue     1
    iConfiguration          2
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         1
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       2 Abstract (modem)
      bFunctionProtocol       1 AT-commands (v.25ter)
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          2
      CDC Union:
        bMasterInterface        1
        bSlaveInterface         2
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        2
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         3
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       2 Abstract (modem)
      bFunctionProtocol       1 AT-commands (v.25ter)
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        3
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          4
      CDC Union:
        bMasterInterface        3
        bSlaveInterface         4
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        4
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x85  EP 5 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         5
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       2 Abstract (modem)
      bFunctionProtocol       1 AT-commands (v.25ter)
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        5
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      6 Ethernet Networking
      bInterfaceProtocol      0
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC Ethernet:
        iMacAddress                      1 (??)
        bmEthernetStatistics    0x00000000
        wMaxSegmentSize              16384
        wNumberMCFilters            0x0001
        bNumberPowerFilters              0
      CDC Union:
        bMasterInterface        5
        bSlaveInterface         6
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x86  EP 6 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        6
      bAlternateSetting       0
      bNumEndpoints           0
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        6
      bAlternateSetting       1
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x87  EP 7 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0

Signed-off-by: Giacinto Cifelli <gciofono@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -419,6 +419,7 @@ static void option_instat_callback(struc
 #define CINTERION_PRODUCT_PH8			0x0053
 #define CINTERION_PRODUCT_AHXX			0x0055
 #define CINTERION_PRODUCT_PLXX			0x0060
+#define CINTERION_PRODUCT_EXS82			0x006c
 #define CINTERION_PRODUCT_PH8_2RMNET		0x0082
 #define CINTERION_PRODUCT_PH8_AUDIO		0x0083
 #define CINTERION_PRODUCT_AHXX_2RMNET		0x0084
@@ -1902,6 +1903,7 @@ static const struct usb_device_id option
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_AUDIO, 0xff) },
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_CLS8, 0xff),
 	  .driver_info = RSVD(0) | RSVD(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EXS82, 0xff) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
 	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) },

[PATCH 4.19 09/39] USB: serial: option: fix Quectel BG96 matching

[Greg Kroah-Hartman]

From: Bjørn Mork <bjorn@mork.no>

commit c98fff7332dbd6e028969f8c2bda3d7bc7a024d8 upstream.

This is a partial revert of commit 2bb70f0a4b23 ("USB: serial:
option: support dynamic Quectel USB compositions")

The Quectel BG96 is different from most other modern Quectel modems,
having serial functions with 3 endpoints using ff/ff/ff and ff/fe/ff
class/subclass/protocol. Including it in the change to accommodate
dynamic function mapping was incorrect.

Revert to interface number matching for the BG96, assuming static
layout of the RMNET function on interface 4. This restores support
for the serial functions on interfaces 2 and 3.

Full lsusb output for the BG96:

Bus 002 Device 003: ID 2c7c:0296
Device Descriptor:
 bLength                18
 bDescriptorType         1
 bcdUSB               2.00
 bDeviceClass            0 (Defined at Interface level)
 bDeviceSubClass         0
 bDeviceProtocol         0
 bMaxPacketSize0        64
 idVendor           0x2c7c
 idProduct          0x0296
 bcdDevice            0.00
 iManufacturer           3 Qualcomm, Incorporated
 iProduct                2 Qualcomm CDMA Technologies MSM
 iSerial                 4 d1098243
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength          145
   bNumInterfaces          5
   bConfigurationValue     1
   iConfiguration          1 Qualcomm Configuration
   bmAttributes         0xe0
     Self Powered
     Remote Wakeup
   MaxPower              500mA
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       0
     bNumEndpoints           2
     bInterfaceClass       255 Vendor Specific Class
     bInterfaceSubClass    255 Vendor Specific Subclass
     bInterfaceProtocol    255 Vendor Specific Protocol
     iInterface              0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0200  1x 512 bytes
       bInterval               0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x01  EP 1 OUT
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0200  1x 512 bytes
       bInterval               0
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        1
     bAlternateSetting       0
     bNumEndpoints           2
     bInterfaceClass       255 Vendor Specific Class
     bInterfaceSubClass    255 Vendor Specific Subclass
     bInterfaceProtocol    255 Vendor Specific Protocol
     iInterface              0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x82  EP 2 IN
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0200  1x 512 bytes
       bInterval               0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x02  EP 2 OUT
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0200  1x 512 bytes
       bInterval               0
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        2
     bAlternateSetting       0
     bNumEndpoints           3
     bInterfaceClass       255 Vendor Specific Class
     bInterfaceSubClass    255 Vendor Specific Subclass
     bInterfaceProtocol    255 Vendor Specific Protocol
     iInterface              0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x83  EP 3 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0040  1x 64 bytes
       bInterval               5
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x84  EP 4 IN
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0200  1x 512 bytes
       bInterval               0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x03  EP 3 OUT
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0200  1x 512 bytes
       bInterval               0
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        3
     bAlternateSetting       0
     bNumEndpoints           3
     bInterfaceClass       255 Vendor Specific Class
     bInterfaceSubClass    254
     bInterfaceProtocol    255
     iInterface              0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x85  EP 5 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0040  1x 64 bytes
       bInterval               5
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x86  EP 6 IN
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0200  1x 512 bytes
       bInterval               0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x04  EP 4 OUT
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0200  1x 512 bytes
       bInterval               0
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        4
     bAlternateSetting       0
     bNumEndpoints           3
     bInterfaceClass       255 Vendor Specific Class
     bInterfaceSubClass    255 Vendor Specific Subclass
     bInterfaceProtocol    255 Vendor Specific Protocol
     iInterface              0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x87  EP 7 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0040  1x 64 bytes
       bInterval               5
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x88  EP 8 IN
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0200  1x 512 bytes
       bInterval               0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x05  EP 5 OUT
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0200  1x 512 bytes
       bInterval               0
Device Qualifier (for other device speed):
 bLength                10
 bDescriptorType         6
 bcdUSB               2.00
 bDeviceClass            0 (Defined at Interface level)
 bDeviceSubClass         0
 bDeviceProtocol         0
 bMaxPacketSize0        64
 bNumConfigurations      1
Device Status:     0x0000
 (Bus Powered)

Cc: Sebastian Sjoholm <sebastian.sjoholm@gmail.com>
Fixes: 2bb70f0a4b23 ("USB: serial: option: support dynamic Quectel USB compositions")
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1106,9 +1106,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0xff, 0xff),
 	  .driver_info = NUMEP2 },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0, 0) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96, 0xff, 0xff, 0xff),
-	  .driver_info = NUMEP2 },
-	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96, 0xff, 0, 0) },
+	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96),
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff),
 	  .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) },

[PATCH 4.19 10/39] tty: Fix ->pgrp locking in tiocspgrp()

[Greg Kroah-Hartman]

From: Jann Horn <jannh@google.com>

commit 54ffccbf053b5b6ca4f6e45094b942fab92a25fc upstream.

tiocspgrp() takes two tty_struct pointers: One to the tty that userspace
passed to ioctl() (`tty`) and one to the TTY being changed (`real_tty`).
These pointers are different when ioctl() is called with a master fd.

To properly lock real_tty->pgrp, we must take real_tty->ctrl_lock.

This bug makes it possible for racing ioctl(TIOCSPGRP, ...) calls on
both sides of a PTY pair to corrupt the refcount of `struct pid`,
leading to use-after-free errors.

Fixes: 47f86834bbd4 ("redo locking of tty->pgrp")
CC: stable@kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/tty_jobctrl.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/tty/tty_jobctrl.c
+++ b/drivers/tty/tty_jobctrl.c
@@ -494,10 +494,10 @@ static int tiocspgrp(struct tty_struct *
 	if (session_of_pgrp(pgrp) != task_session(current))
 		goto out_unlock;
 	retval = 0;
-	spin_lock_irq(&tty->ctrl_lock);
+	spin_lock_irq(&real_tty->ctrl_lock);
 	put_pid(real_tty->pgrp);
 	real_tty->pgrp = get_pid(pgrp);
-	spin_unlock_irq(&tty->ctrl_lock);
+	spin_unlock_irq(&real_tty->ctrl_lock);
 out_unlock:
 	rcu_read_unlock();
 	return retval;

[PATCH 4.19 11/39] tty: Fix ->session locking

[Greg Kroah-Hartman]

From: Jann Horn <jannh@google.com>

commit c8bcd9c5be24fb9e6132e97da5a35e55a83e36b9 upstream.

Currently, locking of ->session is very inconsistent; most places
protect it using the legacy tty mutex, but disassociate_ctty(),
__do_SAK(), tiocspgrp() and tiocgsid() don't.
Two of the writers hold the ctrl_lock (because they already need it for
->pgrp), but __proc_set_tty() doesn't do that yet.

On a PREEMPT=y system, an unprivileged user can theoretically abuse
this broken locking to read 4 bytes of freed memory via TIOCGSID if
tiocgsid() is preempted long enough at the right point. (Other things
might also go wrong, especially if root-only ioctls are involved; I'm
not sure about that.)

Change the locking on ->session such that:

 - tty_lock() is held by all writers: By making disassociate_ctty()
   hold it. This should be fine because the same lock can already be
   taken through the call to tty_vhangup_session().
   The tricky part is that we need to shorten the area covered by
   siglock to be able to take tty_lock() without ugly retry logic; as
   far as I can tell, this should be fine, since nothing in the
   signal_struct is touched in the `if (tty)` branch.
 - ctrl_lock is held by all writers: By changing __proc_set_tty() to
   hold the lock a little longer.
 - All readers that aren't holding tty_lock() hold ctrl_lock: By
   adding locking to tiocgsid() and __do_SAK(), and expanding the area
   covered by ctrl_lock in tiocspgrp().

Cc: stable@kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/tty_io.c      |    7 ++++++-
 drivers/tty/tty_jobctrl.c |   44 +++++++++++++++++++++++++++++++-------------
 include/linux/tty.h       |    4 ++++
 3 files changed, 41 insertions(+), 14 deletions(-)

--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -2747,10 +2747,14 @@ void __do_SAK(struct tty_struct *tty)
 	struct task_struct *g, *p;
 	struct pid *session;
 	int		i;
+	unsigned long flags;
 
 	if (!tty)
 		return;
-	session = tty->session;
+
+	spin_lock_irqsave(&tty->ctrl_lock, flags);
+	session = get_pid(tty->session);
+	spin_unlock_irqrestore(&tty->ctrl_lock, flags);
 
 	tty_ldisc_flush(tty);
 
@@ -2782,6 +2786,7 @@ void __do_SAK(struct tty_struct *tty)
 		task_unlock(p);
 	} while_each_thread(g, p);
 	read_unlock(&tasklist_lock);
+	put_pid(session);
 #endif
 }
 
--- a/drivers/tty/tty_jobctrl.c
+++ b/drivers/tty/tty_jobctrl.c
@@ -103,8 +103,8 @@ static void __proc_set_tty(struct tty_st
 	put_pid(tty->session);
 	put_pid(tty->pgrp);
 	tty->pgrp = get_pid(task_pgrp(current));
-	spin_unlock_irqrestore(&tty->ctrl_lock, flags);
 	tty->session = get_pid(task_session(current));
+	spin_unlock_irqrestore(&tty->ctrl_lock, flags);
 	if (current->signal->tty) {
 		tty_debug(tty, "current tty %s not NULL!!\n",
 			  current->signal->tty->name);
@@ -293,20 +293,23 @@ void disassociate_ctty(int on_exit)
 	spin_lock_irq(&current->sighand->siglock);
 	put_pid(current->signal->tty_old_pgrp);
 	current->signal->tty_old_pgrp = NULL;
-
 	tty = tty_kref_get(current->signal->tty);
+	spin_unlock_irq(&current->sighand->siglock);
+
 	if (tty) {
 		unsigned long flags;
+
+		tty_lock(tty);
 		spin_lock_irqsave(&tty->ctrl_lock, flags);
 		put_pid(tty->session);
 		put_pid(tty->pgrp);
 		tty->session = NULL;
 		tty->pgrp = NULL;
 		spin_unlock_irqrestore(&tty->ctrl_lock, flags);
+		tty_unlock(tty);
 		tty_kref_put(tty);
 	}
 
-	spin_unlock_irq(&current->sighand->siglock);
 	/* Now clear signal->tty under the lock */
 	read_lock(&tasklist_lock);
 	session_clear_tty(task_session(current));
@@ -477,14 +480,19 @@ static int tiocspgrp(struct tty_struct *
 		return -ENOTTY;
 	if (retval)
 		return retval;
-	if (!current->signal->tty ||
-	    (current->signal->tty != real_tty) ||
-	    (real_tty->session != task_session(current)))
-		return -ENOTTY;
+
 	if (get_user(pgrp_nr, p))
 		return -EFAULT;
 	if (pgrp_nr < 0)
 		return -EINVAL;
+
+	spin_lock_irq(&real_tty->ctrl_lock);
+	if (!current->signal->tty ||
+	    (current->signal->tty != real_tty) ||
+	    (real_tty->session != task_session(current))) {
+		retval = -ENOTTY;
+		goto out_unlock_ctrl;
+	}
 	rcu_read_lock();
 	pgrp = find_vpid(pgrp_nr);
 	retval = -ESRCH;
@@ -494,12 +502,12 @@ static int tiocspgrp(struct tty_struct *
 	if (session_of_pgrp(pgrp) != task_session(current))
 		goto out_unlock;
 	retval = 0;
-	spin_lock_irq(&real_tty->ctrl_lock);
 	put_pid(real_tty->pgrp);
 	real_tty->pgrp = get_pid(pgrp);
-	spin_unlock_irq(&real_tty->ctrl_lock);
 out_unlock:
 	rcu_read_unlock();
+out_unlock_ctrl:
+	spin_unlock_irq(&real_tty->ctrl_lock);
 	return retval;
 }
 
@@ -511,20 +519,30 @@ out_unlock:
  *
  *	Obtain the session id of the tty. If there is no session
  *	return an error.
- *
- *	Locking: none. Reference to current->signal->tty is safe.
  */
 static int tiocgsid(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
 {
+	unsigned long flags;
+	pid_t sid;
+
 	/*
 	 * (tty == real_tty) is a cheap way of
 	 * testing if the tty is NOT a master pty.
 	*/
 	if (tty == real_tty && current->signal->tty != real_tty)
 		return -ENOTTY;
+
+	spin_lock_irqsave(&real_tty->ctrl_lock, flags);
 	if (!real_tty->session)
-		return -ENOTTY;
-	return put_user(pid_vnr(real_tty->session), p);
+		goto err;
+	sid = pid_vnr(real_tty->session);
+	spin_unlock_irqrestore(&real_tty->ctrl_lock, flags);
+
+	return put_user(sid, p);
+
+err:
+	spin_unlock_irqrestore(&real_tty->ctrl_lock, flags);
+	return -ENOTTY;
 }
 
 /*
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -306,6 +306,10 @@ struct tty_struct {
 	struct termiox *termiox;	/* May be NULL for unsupported */
 	char name[64];
 	struct pid *pgrp;		/* Protected by ctrl lock */
+	/*
+	 * Writes protected by both ctrl lock and legacy mutex, readers must use
+	 * at least one of them.
+	 */
 	struct pid *session;
 	unsigned long flags;
 	int count;

[PATCH 4.19 12/39] ALSA: hda/realtek: Add mute LED quirk to yet another HP x360 model

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit aeedad2504997be262c98f6e3228173225a8d868 upstream.

HP Spectre x360 Convertible 15" version (SSID 103c:827f) needs the
same quirk to make the mute LED working like other models.
  System Information
    Manufacturer: HP
    Product Name: HP Spectre x360 Convertible 15-bl1XX

  Sound Codec:
    Codec: Realtek ALC295
    Vendor Id: 0x10ec0295
    Subsystem Id: 0x103c827f
    Revision Id: 0x100002

Reported-by: <christoph.plattner@gmx.at>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201128090015.7743-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -7068,6 +7068,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x103c, 0x820d, "HP Pavilion 15", ALC269_FIXUP_HP_MUTE_LED_MIC3),
 	SND_PCI_QUIRK(0x103c, 0x8256, "HP", ALC221_FIXUP_HP_FRONT_MIC),
 	SND_PCI_QUIRK(0x103c, 0x827e, "HP x360", ALC295_FIXUP_HP_X360),
+	SND_PCI_QUIRK(0x103c, 0x827f, "HP x360", ALC269_FIXUP_HP_MUTE_LED_MIC3),
 	SND_PCI_QUIRK(0x103c, 0x82bf, "HP G3 mini", ALC221_FIXUP_HP_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x103c, 0x82c0, "HP G3 mini premium", ALC221_FIXUP_HP_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x103c, 0x83b9, "HP Spectre x360", ALC269_FIXUP_HP_MUTE_LED_MIC3),

[PATCH 4.19 13/39] ALSA: hda/realtek: Enable headset of ASUS UX482EG & B9400CEA with ALC294

[Greg Kroah-Hartman]

From: Jian-Hong Pan <jhp@endlessos.org>

commit eeacd80fcb29b769ea915cd06b7dd35e0bf0bc25 upstream.

Some laptops like ASUS UX482EG & B9400CEA's headset audio does not work
until the quirk ALC294_FIXUP_ASUS_HPE is applied.

Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201124092024.179540-1-jhp@endlessos.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_realtek.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -7778,6 +7778,9 @@ static const struct snd_hda_pin_quirk al
 	SND_HDA_PIN_QUIRK(0x10ec0293, 0x1028, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE,
 		ALC292_STANDARD_PINS,
 		{0x13, 0x90a60140}),
+	SND_HDA_PIN_QUIRK(0x10ec0294, 0x1043, "ASUS", ALC294_FIXUP_ASUS_HPE,
+		{0x17, 0x90170110},
+		{0x21, 0x04211020}),
 	SND_HDA_PIN_QUIRK(0x10ec0294, 0x1043, "ASUS", ALC294_FIXUP_ASUS_MIC,
 		{0x14, 0x90170110},
 		{0x1b, 0x90a70130},

[PATCH 4.19 14/39] ALSA: hda/realtek - Add new codec supported for ALC897

[Greg Kroah-Hartman]

From: Kailang Yang <kailang@realtek.com>

commit e5782a5d5054bf1e03cb7fbd87035037c2a22698 upstream.

Enable new codec supported for ALC897.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/3b00520f304842aab8291eb8d9191bd8@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_realtek.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -439,6 +439,7 @@ static void alc_fill_eapd_coef(struct hd
 			alc_update_coef_idx(codec, 0x7, 1<<5, 0);
 		break;
 	case 0x10ec0892:
+	case 0x10ec0897:
 		alc_update_coef_idx(codec, 0x7, 1<<5, 0);
 		break;
 	case 0x10ec0899:
@@ -9166,6 +9167,7 @@ static const struct hda_device_id snd_hd
 	HDA_CODEC_ENTRY(0x10ec0888, "ALC888", patch_alc882),
 	HDA_CODEC_ENTRY(0x10ec0889, "ALC889", patch_alc882),
 	HDA_CODEC_ENTRY(0x10ec0892, "ALC892", patch_alc662),
+	HDA_CODEC_ENTRY(0x10ec0897, "ALC897", patch_alc662),
 	HDA_CODEC_ENTRY(0x10ec0899, "ALC898", patch_alc882),
 	HDA_CODEC_ENTRY(0x10ec0900, "ALC1150", patch_alc882),
 	HDA_CODEC_ENTRY(0x10ec0b00, "ALCS1200A", patch_alc882),

[PATCH 4.19 15/39] ALSA: hda/generic: Add option to enforce preferred_dacs pairs

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 242d990c158d5b1dabd166516e21992baef5f26a upstream.

The generic parser accepts the preferred_dacs[] pairs as a hint for
assigning a DAC to each pin, but this hint doesn't work always
effectively.  Currently it's merely a secondary choice after the trial
with the path index failed.  This made sometimes it difficult to
assign DACs without mimicking the connection list and/or the badness
table.

This patch adds a new flag, obey_preferred_dacs, that changes the
behavior of the parser.  As its name stands, the parser obeys the
given preferred_dacs[] pairs by skipping the path index matching and
giving a high penalty if no DAC is assigned by the pairs.  This mode
will help for assigning the fixed DACs forcibly from the codec
driver.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201127141104.11041-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/hda_generic.c |   12 ++++++++----
 sound/pci/hda/hda_generic.h |    1 +
 2 files changed, 9 insertions(+), 4 deletions(-)

--- a/sound/pci/hda/hda_generic.c
+++ b/sound/pci/hda/hda_generic.c
@@ -1376,16 +1376,20 @@ static int try_assign_dacs(struct hda_co
 		struct nid_path *path;
 		hda_nid_t pin = pins[i];
 
-		path = snd_hda_get_path_from_idx(codec, path_idx[i]);
-		if (path) {
-			badness += assign_out_path_ctls(codec, path);
-			continue;
+		if (!spec->obey_preferred_dacs) {
+			path = snd_hda_get_path_from_idx(codec, path_idx[i]);
+			if (path) {
+				badness += assign_out_path_ctls(codec, path);
+				continue;
+			}
 		}
 
 		dacs[i] = get_preferred_dac(codec, pin);
 		if (dacs[i]) {
 			if (is_dac_already_used(codec, dacs[i]))
 				badness += bad->shared_primary;
+		} else if (spec->obey_preferred_dacs) {
+			badness += BAD_NO_PRIMARY_DAC;
 		}
 
 		if (!dacs[i])
--- a/sound/pci/hda/hda_generic.h
+++ b/sound/pci/hda/hda_generic.h
@@ -240,6 +240,7 @@ struct hda_gen_spec {
 	unsigned int power_down_unused:1; /* power down unused widgets */
 	unsigned int dac_min_mute:1; /* minimal = mute for DACs */
 	unsigned int suppress_vmaster:1; /* don't create vmaster kctls */
+	unsigned int obey_preferred_dacs:1; /* obey preferred_dacs assignment */
 
 	/* other internal flags */
 	unsigned int no_analog:1; /* digital I/O only */

[PATCH 4.19 16/39] ftrace: Fix updating FTRACE_FL_TRAMP

[Greg Kroah-Hartman]

From: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>

commit 4c75b0ff4e4bf7a45b5aef9639799719c28d0073 upstream.

On powerpc, kprobe-direct.tc triggered FTRACE_WARN_ON() in
ftrace_get_addr_new() followed by the below message:
  Bad trampoline accounting at: 000000004222522f (wake_up_process+0xc/0x20) (f0000001)

The set of steps leading to this involved:
- modprobe ftrace-direct-too
- enable_probe
- modprobe ftrace-direct
- rmmod ftrace-direct <-- trigger

The problem turned out to be that we were not updating flags in the
ftrace record properly. From the above message about the trampoline
accounting being bad, it can be seen that the ftrace record still has
FTRACE_FL_TRAMP set though ftrace-direct module is going away. This
happens because we are checking if any ftrace_ops has the
FTRACE_FL_TRAMP flag set _before_ updating the filter hash.

The fix for this is to look for any _other_ ftrace_ops that also needs
FTRACE_FL_TRAMP.

Link: https://lkml.kernel.org/r/56c113aa9c3e10c19144a36d9684c7882bf09af5.1606412433.git.naveen.n.rao@linux.vnet.ibm.com

Cc: stable@vger.kernel.org
Fixes: a124692b698b0 ("ftrace: Enable trampoline when rec count returns back to one")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/ftrace.c |   22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -1650,6 +1650,8 @@ static bool test_rec_ops_needs_regs(stru
 static struct ftrace_ops *
 ftrace_find_tramp_ops_any(struct dyn_ftrace *rec);
 static struct ftrace_ops *
+ftrace_find_tramp_ops_any_other(struct dyn_ftrace *rec, struct ftrace_ops *op_exclude);
+static struct ftrace_ops *
 ftrace_find_tramp_ops_next(struct dyn_ftrace *rec, struct ftrace_ops *ops);
 
 static bool __ftrace_hash_rec_update(struct ftrace_ops *ops,
@@ -1787,7 +1789,7 @@ static bool __ftrace_hash_rec_update(str
 			 * to it.
 			 */
 			if (ftrace_rec_count(rec) == 1 &&
-			    ftrace_find_tramp_ops_any(rec))
+			    ftrace_find_tramp_ops_any_other(rec, ops))
 				rec->flags |= FTRACE_FL_TRAMP;
 			else
 				rec->flags &= ~FTRACE_FL_TRAMP;
@@ -2209,6 +2211,24 @@ ftrace_find_tramp_ops_any(struct dyn_ftr
 			continue;
 
 		if (hash_contains_ip(ip, op->func_hash))
+			return op;
+	} while_for_each_ftrace_op(op);
+
+	return NULL;
+}
+
+static struct ftrace_ops *
+ftrace_find_tramp_ops_any_other(struct dyn_ftrace *rec, struct ftrace_ops *op_exclude)
+{
+	struct ftrace_ops *op;
+	unsigned long ip = rec->ip;
+
+	do_for_each_ftrace_op(op, ftrace_ops_list) {
+
+		if (op == op_exclude || !op->trampoline)
+			continue;
+
+		if (hash_contains_ip(ip, op->func_hash))
 			return op;
 	} while_for_each_ftrace_op(op);
 

[PATCH 4.19 17/39] cifs: fix potential use-after-free in cifs_echo_request()

[Greg Kroah-Hartman]

From: Paulo Alcantara <pc@cjr.nz>

commit 212253367dc7b49ed3fc194ce71b0992eacaecf2 upstream.

This patch fixes a potential use-after-free bug in
cifs_echo_request().

For instance,

  thread 1
  --------
  cifs_demultiplex_thread()
    clean_demultiplex_info()
      kfree(server)

  thread 2 (workqueue)
  --------
  apic_timer_interrupt()
    smp_apic_timer_interrupt()
      irq_exit()
        __do_softirq()
          run_timer_softirq()
            call_timer_fn()
	      cifs_echo_request() <- use-after-free in server ptr

Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/connect.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -777,6 +777,8 @@ static void clean_demultiplex_info(struc
 	list_del_init(&server->tcp_ses_list);
 	spin_unlock(&cifs_tcp_ses_lock);
 
+	cancel_delayed_work_sync(&server->echo);
+
 	spin_lock(&GlobalMid_Lock);
 	server->tcpStatus = CifsExiting;
 	spin_unlock(&GlobalMid_Lock);

[PATCH 4.19 18/39] i2c: imx: Dont generate STOP condition if arbitration has been lost

[Greg Kroah-Hartman]

From: Christian Eggers <ceggers@arri.de>

commit 61e6fe59ede155881a622f5901551b1cc8748f6a upstream.

If arbitration is lost, the master automatically changes to slave mode.
I2SR_IBB may or may not be reset by hardware. Raising a STOP condition
by resetting I2CR_MSTA has no effect and will not clear I2SR_IBB.

So calling i2c_imx_bus_busy() is not required and would busy-wait until
timeout.

Signed-off-by: Christian Eggers <ceggers@arri.de>
Tested (not extensively) on Vybrid VF500 (Toradex VF50):
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org # Requires trivial backporting, simple remove
                           # the 3rd argument from the calls to
                           # i2c_imx_bus_busy().
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/i2c/busses/i2c-imx.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -557,6 +557,8 @@ static void i2c_imx_stop(struct imx_i2c_
 		/* Stop I2C transaction */
 		dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
 		temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+		if (!(temp & I2CR_MSTA))
+			i2c_imx->stopped = 1;
 		temp &= ~(I2CR_MSTA | I2CR_MTX);
 		if (i2c_imx->dma)
 			temp &= ~I2CR_DMAEN;
@@ -722,9 +724,12 @@ static int i2c_imx_dma_read(struct imx_i
 		 */
 		dev_dbg(dev, "<%s> clear MSTA\n", __func__);
 		temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+		if (!(temp & I2CR_MSTA))
+			i2c_imx->stopped = 1;
 		temp &= ~(I2CR_MSTA | I2CR_MTX);
 		imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
-		i2c_imx_bus_busy(i2c_imx, 0);
+		if (!i2c_imx->stopped)
+			i2c_imx_bus_busy(i2c_imx, 0);
 	} else {
 		/*
 		 * For i2c master receiver repeat restart operation like:
@@ -847,9 +852,12 @@ static int i2c_imx_read(struct imx_i2c_s
 				dev_dbg(&i2c_imx->adapter.dev,
 					"<%s> clear MSTA\n", __func__);
 				temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+				if (!(temp & I2CR_MSTA))
+					i2c_imx->stopped =  1;
 				temp &= ~(I2CR_MSTA | I2CR_MTX);
 				imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
-				i2c_imx_bus_busy(i2c_imx, 0);
+				if (!i2c_imx->stopped)
+					i2c_imx_bus_busy(i2c_imx, 0);
 			} else {
 				/*
 				 * For i2c master receiver repeat restart operation like:

[PATCH 4.19 19/39] scsi: mpt3sas: Fix ioctl timeout

[Greg Kroah-Hartman]

From: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>

commit 42f687038bcc34aa919e0e4c29b04e4cda3f6a79 upstream.

Commit c1a6c5ac4278 ("scsi: mpt3sas: For NVME device, issue a protocol
level reset") modified the ioctl path 'timeout' variable type to u8 from
unsigned long, limiting the maximum timeout value that the driver can
support to 255 seconds.

If the management application is requesting a higher value the resulting
timeout will be zero. The operation times out immediately and the ioctl
request fails.

Change datatype back to unsigned long.

Link: https://lore.kernel.org/r/20201125094838.4340-1-suganath-prabu.subramani@broadcom.com
Fixes: c1a6c5ac4278 ("scsi: mpt3sas: For NVME device, issue a protocol level reset")
Cc: <stable@vger.kernel.org> #v4.18+
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/mpt3sas/mpt3sas_ctl.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
@@ -654,7 +654,7 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPT
 	struct _pcie_device *pcie_device = NULL;
 	u32 ioc_state;
 	u16 smid;
-	u8 timeout;
+	unsigned long timeout;
 	u8 issue_reset;
 	u32 sz, sz_arg;
 	void *psge;

[PATCH 4.19 20/39] dm writecache: fix the maximum number of arguments

[Greg Kroah-Hartman]

From: Mikulas Patocka <mpatocka@redhat.com>

commit 67aa3ec3dbc43d6e34401d9b2a40040ff7bb57af upstream.

Advance the maximum number of arguments to 16.
This fixes issue where certain operations, combined with table
configured args, exceed 10 arguments.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 48debafe4f2f ("dm: add writecache target")
Cc: stable@vger.kernel.org # v4.18+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-writecache.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/md/dm-writecache.c
+++ b/drivers/md/dm-writecache.c
@@ -1883,7 +1883,7 @@ static int writecache_ctr(struct dm_targ
 	struct wc_memory_superblock s;
 
 	static struct dm_arg _args[] = {
-		{0, 10, "Invalid number of feature args"},
+		{0, 16, "Invalid number of feature args"},
 	};
 
 	as.argc = argc;

[PATCH 4.19 21/39] dm: remove invalid sparse __acquires and __releases annotations

[Greg Kroah-Hartman]

From: Mike Snitzer <snitzer@redhat.com>

commit bde3808bc8c2741ad3d804f84720409aee0c2972 upstream.

Fixes sparse warnings:
drivers/md/dm.c:508:12: warning: context imbalance in 'dm_prepare_ioctl' - wrong count at exit
drivers/md/dm.c:543:13: warning: context imbalance in 'dm_unprepare_ioctl' - wrong count at exit

Fixes: 971888c46993f ("dm: hold DM table for duration of ioctl rather than use blkdev_get")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm.c |    2 --
 1 file changed, 2 deletions(-)

--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -462,7 +462,6 @@ static int dm_blk_getgeo(struct block_de
 
 static int dm_prepare_ioctl(struct mapped_device *md, int *srcu_idx,
 			    struct block_device **bdev)
-	__acquires(md->io_barrier)
 {
 	struct dm_target *tgt;
 	struct dm_table *map;
@@ -496,7 +495,6 @@ retry:
 }
 
 static void dm_unprepare_ioctl(struct mapped_device *md, int srcu_idx)
-	__releases(md->io_barrier)
 {
 	dm_put_live_table(md, srcu_idx);
 }

[PATCH 4.19 22/39] mm: list_lru: set shrinker map bit when child nr_items is not zero

[Greg Kroah-Hartman]

From: Yang Shi <shy828301@gmail.com>

commit 8199be001a470209f5c938570cc199abb012fe53 upstream.

When investigating a slab cache bloat problem, significant amount of
negative dentry cache was seen, but confusingly they neither got shrunk
by reclaimer (the host has very tight memory) nor be shrunk by dropping
cache.  The vmcore shows there are over 14M negative dentry objects on
lru, but tracing result shows they were even not scanned at all.

Further investigation shows the memcg's vfs shrinker_map bit is not set.
So the reclaimer or dropping cache just skip calling vfs shrinker.  So
we have to reboot the hosts to get the memory back.

I didn't manage to come up with a reproducer in test environment, and
the problem can't be reproduced after rebooting.  But it seems there is
race between shrinker map bit clear and reparenting by code inspection.
The hypothesis is elaborated as below.

The memcg hierarchy on our production environment looks like:

                root
               /    \
          system   user

The main workloads are running under user slice's children, and it
creates and removes memcg frequently.  So reparenting happens very often
under user slice, but no task is under user slice directly.

So with the frequent reparenting and tight memory pressure, the below
hypothetical race condition may happen:

       CPU A                            CPU B
reparent
    dst->nr_items == 0
                                 shrinker:
                                     total_objects == 0
    add src->nr_items to dst
    set_bit
                                     return SHRINK_EMPTY
                                     clear_bit
child memcg offline
    replace child's kmemcg_id with
    parent's (in memcg_offline_kmem())
                                  list_lru_del() between shrinker runs
                                     see parent's kmemcg_id
                                     dec dst->nr_items
reparent again
    dst->nr_items may go negative
    due to concurrent list_lru_del()

                                 The second run of shrinker:
                                     read nr_items without any
                                     synchronization, so it may
                                     see intermediate negative
                                     nr_items then total_objects
                                     may return 0 coincidently

                                     keep the bit cleared
    dst->nr_items != 0
    skip set_bit
    add scr->nr_item to dst

After this point dst->nr_item may never go zero, so reparenting will not
set shrinker_map bit anymore.  And since there is no task under user
slice directly, so no new object will be added to its lru to set the
shrinker map bit either.  That bit is kept cleared forever.

How does list_lru_del() race with reparenting? It is because reparenting
replaces children's kmemcg_id to parent's without protecting from
nlru->lock, so list_lru_del() may see parent's kmemcg_id but actually
deleting items from child's lru, but dec'ing parent's nr_items, so the
parent's nr_items may go negative as commit 2788cf0c401c ("memcg:
reparent list_lrus and free kmemcg_id on css offline") says.

Since it is impossible that dst->nr_items goes negative and
src->nr_items goes zero at the same time, so it seems we could set the
shrinker map bit iff src->nr_items != 0.  We could synchronize
list_lru_count_one() and reparenting with nlru->lock, but it seems
checking src->nr_items in reparenting is the simplest and avoids lock
contention.

Fixes: fae91d6d8be5 ("mm/list_lru.c: set bit in memcg shrinker bitmap on first list_lru item appearance")
Suggested-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org>	[4.19]
Link: https://lkml.kernel.org/r/20201202171749.264354-1-shy828301@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/list_lru.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/mm/list_lru.c
+++ b/mm/list_lru.c
@@ -542,7 +542,6 @@ static void memcg_drain_list_lru_node(st
 	struct list_lru_node *nlru = &lru->node[nid];
 	int dst_idx = dst_memcg->kmemcg_id;
 	struct list_lru_one *src, *dst;
-	bool set;
 
 	/*
 	 * Since list_lru_{add,del} may be called under an IRQ-safe lock,
@@ -554,11 +553,12 @@ static void memcg_drain_list_lru_node(st
 	dst = list_lru_from_memcg_idx(nlru, dst_idx);
 
 	list_splice_init(&src->list, &dst->list);
-	set = (!dst->nr_items && src->nr_items);
-	dst->nr_items += src->nr_items;
-	if (set)
+
+	if (src->nr_items) {
+		dst->nr_items += src->nr_items;
 		memcg_set_shrinker_bit(dst_memcg, nid, lru_shrinker_id(lru));
-	src->nr_items = 0;
+		src->nr_items = 0;
+	}
 
 	spin_unlock_irq(&nlru->lock);
 }

[PATCH 4.19 23/39] mm/swapfile: do not sleep with a spin lock held

[Greg Kroah-Hartman]

From: Qian Cai <qcai@redhat.com>

commit b11a76b37a5aa7b07c3e3eeeaae20b25475bddd3 upstream.

We can't call kvfree() with a spin lock held, so defer it.  Fixes a
might_sleep() runtime warning.

Fixes: 873d7bcfd066 ("mm/swapfile.c: use kvzalloc for swap_info_struct allocation")
Signed-off-by: Qian Cai <qcai@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201202151549.10350-1-qcai@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/swapfile.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -2825,6 +2825,7 @@ late_initcall(max_swapfiles_check);
 static struct swap_info_struct *alloc_swap_info(void)
 {
 	struct swap_info_struct *p;
+	struct swap_info_struct *defer = NULL;
 	unsigned int type;
 	int i;
 	int size = sizeof(*p) + nr_node_ids * sizeof(struct plist_node);
@@ -2854,7 +2855,7 @@ static struct swap_info_struct *alloc_sw
 		smp_wmb();
 		WRITE_ONCE(nr_swapfiles, nr_swapfiles + 1);
 	} else {
-		kvfree(p);
+		defer = p;
 		p = swap_info[type];
 		/*
 		 * Do not memset this entry: a racing procfs swap_next()
@@ -2867,6 +2868,7 @@ static struct swap_info_struct *alloc_sw
 		plist_node_init(&p->avail_lists[i], 0);
 	p->flags = SWP_USED;
 	spin_unlock(&swap_lock);
+	kvfree(defer);
 	spin_lock_init(&p->lock);
 	spin_lock_init(&p->cont_lock);
 

[PATCH 4.19 24/39] x86/uprobes: Do not use prefixes.nbytes when looping over prefixes.bytes

[Greg Kroah-Hartman]

From: Masami Hiramatsu <mhiramat@kernel.org>

commit 4e9a5ae8df5b3365183150f6df49e49dece80d8c upstream.

Since insn.prefixes.nbytes can be bigger than the size of
insn.prefixes.bytes[] when a prefix is repeated, the proper check must
be

  insn.prefixes.bytes[i] != 0 and i < 4

instead of using insn.prefixes.nbytes.

Introduce a for_each_insn_prefix() macro for this purpose. Debugged by
Kees Cook <keescook@chromium.org>.

 [ bp: Massage commit message, sync with the respective header in tools/
   and drop "we". ]

Fixes: 2b1444983508 ("uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints")
Reported-by: syzbot+9b64b619f10f19d19a7c@syzkaller.appspotmail.com
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/160697103739.3146288.7437620795200799020.stgit@devnote2
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/insn.h               |   15 +++++++++++++++
 arch/x86/kernel/uprobes.c                 |   10 ++++++----
 tools/objtool/arch/x86/include/asm/insn.h |   15 +++++++++++++++
 tools/perf/util/intel-pt-decoder/insn.h   |   15 +++++++++++++++
 4 files changed, 51 insertions(+), 4 deletions(-)

--- a/arch/x86/include/asm/insn.h
+++ b/arch/x86/include/asm/insn.h
@@ -208,6 +208,21 @@ static inline int insn_offset_immediate(
 	return insn_offset_displacement(insn) + insn->displacement.nbytes;
 }
 
+/**
+ * for_each_insn_prefix() -- Iterate prefixes in the instruction
+ * @insn: Pointer to struct insn.
+ * @idx:  Index storage.
+ * @prefix: Prefix byte.
+ *
+ * Iterate prefix bytes of given @insn. Each prefix byte is stored in @prefix
+ * and the index is stored in @idx (note that this @idx is just for a cursor,
+ * do not change it.)
+ * Since prefixes.nbytes can be bigger than 4 if some prefixes
+ * are repeated, it cannot be used for looping over the prefixes.
+ */
+#define for_each_insn_prefix(insn, idx, prefix)	\
+	for (idx = 0; idx < ARRAY_SIZE(insn->prefixes.bytes) && (prefix = insn->prefixes.bytes[idx]) != 0; idx++)
+
 #define POP_SS_OPCODE 0x1f
 #define MOV_SREG_OPCODE 0x8e
 
--- a/arch/x86/kernel/uprobes.c
+++ b/arch/x86/kernel/uprobes.c
@@ -268,12 +268,13 @@ static volatile u32 good_2byte_insns[256
 
 static bool is_prefix_bad(struct insn *insn)
 {
+	insn_byte_t p;
 	int i;
 
-	for (i = 0; i < insn->prefixes.nbytes; i++) {
+	for_each_insn_prefix(insn, i, p) {
 		insn_attr_t attr;
 
-		attr = inat_get_opcode_attribute(insn->prefixes.bytes[i]);
+		attr = inat_get_opcode_attribute(p);
 		switch (attr) {
 		case INAT_MAKE_PREFIX(INAT_PFX_ES):
 		case INAT_MAKE_PREFIX(INAT_PFX_CS):
@@ -728,6 +729,7 @@ static const struct uprobe_xol_ops push_
 static int branch_setup_xol_ops(struct arch_uprobe *auprobe, struct insn *insn)
 {
 	u8 opc1 = OPCODE1(insn);
+	insn_byte_t p;
 	int i;
 
 	switch (opc1) {
@@ -758,8 +760,8 @@ static int branch_setup_xol_ops(struct a
 	 * Intel and AMD behavior differ in 64-bit mode: Intel ignores 66 prefix.
 	 * No one uses these insns, reject any branch insns with such prefix.
 	 */
-	for (i = 0; i < insn->prefixes.nbytes; i++) {
-		if (insn->prefixes.bytes[i] == 0x66)
+	for_each_insn_prefix(insn, i, p) {
+		if (p == 0x66)
 			return -ENOTSUPP;
 	}
 
--- a/tools/objtool/arch/x86/include/asm/insn.h
+++ b/tools/objtool/arch/x86/include/asm/insn.h
@@ -208,6 +208,21 @@ static inline int insn_offset_immediate(
 	return insn_offset_displacement(insn) + insn->displacement.nbytes;
 }
 
+/**
+ * for_each_insn_prefix() -- Iterate prefixes in the instruction
+ * @insn: Pointer to struct insn.
+ * @idx:  Index storage.
+ * @prefix: Prefix byte.
+ *
+ * Iterate prefix bytes of given @insn. Each prefix byte is stored in @prefix
+ * and the index is stored in @idx (note that this @idx is just for a cursor,
+ * do not change it.)
+ * Since prefixes.nbytes can be bigger than 4 if some prefixes
+ * are repeated, it cannot be used for looping over the prefixes.
+ */
+#define for_each_insn_prefix(insn, idx, prefix)	\
+	for (idx = 0; idx < ARRAY_SIZE(insn->prefixes.bytes) && (prefix = insn->prefixes.bytes[idx]) != 0; idx++)
+
 #define POP_SS_OPCODE 0x1f
 #define MOV_SREG_OPCODE 0x8e
 
--- a/tools/perf/util/intel-pt-decoder/insn.h
+++ b/tools/perf/util/intel-pt-decoder/insn.h
@@ -208,6 +208,21 @@ static inline int insn_offset_immediate(
 	return insn_offset_displacement(insn) + insn->displacement.nbytes;
 }
 
+/**
+ * for_each_insn_prefix() -- Iterate prefixes in the instruction
+ * @insn: Pointer to struct insn.
+ * @idx:  Index storage.
+ * @prefix: Prefix byte.
+ *
+ * Iterate prefix bytes of given @insn. Each prefix byte is stored in @prefix
+ * and the index is stored in @idx (note that this @idx is just for a cursor,
+ * do not change it.)
+ * Since prefixes.nbytes can be bigger than 4 if some prefixes
+ * are repeated, it cannot be used for looping over the prefixes.
+ */
+#define for_each_insn_prefix(insn, idx, prefix)	\
+	for (idx = 0; idx < ARRAY_SIZE(insn->prefixes.bytes) && (prefix = insn->prefixes.bytes[idx]) != 0; idx++)
+
 #define POP_SS_OPCODE 0x1f
 #define MOV_SREG_OPCODE 0x8e
 

[PATCH 4.19 25/39] i2c: imx: Fix reset of I2SR_IAL flag

[Greg Kroah-Hartman]

From: Christian Eggers <ceggers@arri.de>

commit 384a9565f70a876c2e78e58c5ca0bbf0547e4f6d upstream.

According to the "VFxxx Controller Reference Manual" (and the comment
block starting at line 97), Vybrid requires writing a one for clearing
an interrupt flag. Syncing the method for clearing I2SR_IIF in
i2c_imx_isr().

Signed-off-by: Christian Eggers <ceggers@arri.de>
Fixes: 4b775022f6fd ("i2c: imx: add struct to hold more configurable quirks")
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/i2c/busses/i2c-imx.c |   20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)

--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -404,6 +404,19 @@ static void i2c_imx_dma_free(struct imx_
 	dma->chan_using = NULL;
 }
 
+static void i2c_imx_clear_irq(struct imx_i2c_struct *i2c_imx, unsigned int bits)
+{
+	unsigned int temp;
+
+	/*
+	 * i2sr_clr_opcode is the value to clear all interrupts. Here we want to
+	 * clear only <bits>, so we write ~i2sr_clr_opcode with just <bits>
+	 * toggled. This is required because i.MX needs W0C and Vybrid uses W1C.
+	 */
+	temp = ~i2c_imx->hwdata->i2sr_clr_opcode ^ bits;
+	imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
+}
+
 static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy)
 {
 	unsigned long orig_jiffies = jiffies;
@@ -416,8 +429,7 @@ static int i2c_imx_bus_busy(struct imx_i
 
 		/* check for arbitration lost */
 		if (temp & I2SR_IAL) {
-			temp &= ~I2SR_IAL;
-			imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
+			i2c_imx_clear_irq(i2c_imx, I2SR_IAL);
 			return -EAGAIN;
 		}
 
@@ -589,9 +601,7 @@ static irqreturn_t i2c_imx_isr(int irq,
 	if (temp & I2SR_IIF) {
 		/* save status register */
 		i2c_imx->i2csr = temp;
-		temp &= ~I2SR_IIF;
-		temp |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IIF);
-		imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
+		i2c_imx_clear_irq(i2c_imx, I2SR_IIF);
 		wake_up(&i2c_imx->queue);
 		return IRQ_HANDLED;
 	}

[PATCH 4.19 26/39] i2c: imx: Check for I2SR_IAL after every byte

[Greg Kroah-Hartman]

From: Christian Eggers <ceggers@arri.de>

commit 1de67a3dee7a279ebe4d892b359fe3696938ec15 upstream.

Arbitration Lost (IAL) can happen after every single byte transfer. If
arbitration is lost, the I2C hardware will autonomously switch from
master mode to slave. If a transfer is not aborted in this state,
consecutive transfers will not be executed by the hardware and will
timeout.

Signed-off-by: Christian Eggers <ceggers@arri.de>
Tested (not extensively) on Vybrid VF500 (Toradex VF50):
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/i2c/busses/i2c-imx.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -460,6 +460,16 @@ static int i2c_imx_trx_complete(struct i
 		dev_dbg(&i2c_imx->adapter.dev, "<%s> Timeout\n", __func__);
 		return -ETIMEDOUT;
 	}
+
+	/* check for arbitration lost */
+	if (i2c_imx->i2csr & I2SR_IAL) {
+		dev_dbg(&i2c_imx->adapter.dev, "<%s> Arbitration lost\n", __func__);
+		i2c_imx_clear_irq(i2c_imx, I2SR_IAL);
+
+		i2c_imx->i2csr = 0;
+		return -EAGAIN;
+	}
+
 	dev_dbg(&i2c_imx->adapter.dev, "<%s> TRX complete\n", __func__);
 	i2c_imx->i2csr = 0;
 	return 0;

[PATCH 4.19 27/39] speakup: Reject setting the speakup line discipline outside of speakup

[Greg Kroah-Hartman]

From: Samuel Thibault <samuel.thibault@ens-lyon.org>

commit f0992098cadb4c9c6a00703b66cafe604e178fea upstream.

Speakup exposing a line discipline allows userland to try to use it,
while it is deemed to be useless, and thus uselessly exposes potential
bugs. One of them is simply that in such a case if the line sends data,
spk_ttyio_receive_buf2 is called and crashes since spk_ttyio_synth
is NULL.

This change restricts the use of the speakup line discipline to
speakup drivers, thus avoiding such kind of issues altogether.

Cc: stable@vger.kernel.org
Reported-by: Shisong Qin <qinshisong1205@gmail.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Shisong Qin <qinshisong1205@gmail.com>
Link: https://lore.kernel.org/r/20201129193523.hm3f6n5xrn6fiyyc@function
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/speakup/spk_ttyio.c |   37 ++++++++++++++++++++++--------------
 1 file changed, 23 insertions(+), 14 deletions(-)

--- a/drivers/staging/speakup/spk_ttyio.c
+++ b/drivers/staging/speakup/spk_ttyio.c
@@ -47,27 +47,20 @@ static int spk_ttyio_ldisc_open(struct t
 {
 	struct spk_ldisc_data *ldisc_data;
 
+	if (tty != speakup_tty)
+		/* Somebody tried to use this line discipline outside speakup */
+		return -ENODEV;
+
 	if (tty->ops->write == NULL)
 		return -EOPNOTSUPP;
 
-	mutex_lock(&speakup_tty_mutex);
-	if (speakup_tty) {
-		mutex_unlock(&speakup_tty_mutex);
-		return -EBUSY;
-	}
-	speakup_tty = tty;
-
 	ldisc_data = kmalloc(sizeof(struct spk_ldisc_data), GFP_KERNEL);
-	if (!ldisc_data) {
-		speakup_tty = NULL;
-		mutex_unlock(&speakup_tty_mutex);
+	if (!ldisc_data)
 		return -ENOMEM;
-	}
 
 	sema_init(&ldisc_data->sem, 0);
 	ldisc_data->buf_free = true;
-	speakup_tty->disc_data = ldisc_data;
-	mutex_unlock(&speakup_tty_mutex);
+	tty->disc_data = ldisc_data;
 
 	return 0;
 }
@@ -187,9 +180,25 @@ static int spk_ttyio_initialise_ldisc(st
 
 	tty_unlock(tty);
 
+	mutex_lock(&speakup_tty_mutex);
+	speakup_tty = tty;
 	ret = tty_set_ldisc(tty, N_SPEAKUP);
 	if (ret)
-		pr_err("speakup: Failed to set N_SPEAKUP on tty\n");
+		speakup_tty = NULL;
+	mutex_unlock(&speakup_tty_mutex);
+
+	if (!ret)
+		/* Success */
+		return 0;
+
+	pr_err("speakup: Failed to set N_SPEAKUP on tty\n");
+
+	tty_lock(tty);
+	if (tty->ops->close)
+		tty->ops->close(tty, NULL);
+	tty_unlock(tty);
+
+	tty_kclose(tty);
 
 	return ret;
 }

[PATCH 4.19 28/39] iommu/amd: Set DTE[IntTabLen] to represent 512 IRTEs

[Greg Kroah-Hartman]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

commit 4165bf015ba9454f45beaad621d16c516d5c5afe upstream.

According to the AMD IOMMU spec, the commit 73db2fc595f3
("iommu/amd: Increase interrupt remapping table limit to 512 entries")
also requires the interrupt table length (IntTabLen) to be set to 9
(power of 2) in the device table mapping entry (DTE).

Fixes: 73db2fc595f3 ("iommu/amd: Increase interrupt remapping table limit to 512 entries")
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20201207091920.3052-1-suravee.suthikulpanit@amd.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iommu/amd_iommu_types.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/iommu/amd_iommu_types.h
+++ b/drivers/iommu/amd_iommu_types.h
@@ -259,7 +259,7 @@
 #define DTE_IRQ_REMAP_INTCTL_MASK	(0x3ULL << 60)
 #define DTE_IRQ_TABLE_LEN_MASK	(0xfULL << 1)
 #define DTE_IRQ_REMAP_INTCTL    (2ULL << 60)
-#define DTE_IRQ_TABLE_LEN       (8ULL << 1)
+#define DTE_IRQ_TABLE_LEN       (9ULL << 1)
 #define DTE_IRQ_REMAP_ENABLE    1ULL
 
 #define PAGE_MODE_NONE    0x00

[PATCH 4.19 29/39] spi: Introduce device-managed SPI controller allocation

[Greg Kroah-Hartman]

From: Lukas Wunner <lukas@wunner.de>

[ Upstream commit 5e844cc37a5cbaa460e68f9a989d321d63088a89 ]

SPI driver probing currently comprises two steps, whereas removal
comprises only one step:

    spi_alloc_master()
    spi_register_controller()

    spi_unregister_controller()

That's because spi_unregister_controller() calls device_unregister()
instead of device_del(), thereby releasing the reference on the
spi_controller which was obtained by spi_alloc_master().

An SPI driver's private data is contained in the same memory allocation
as the spi_controller struct.  Thus, once spi_unregister_controller()
has been called, the private data is inaccessible.  But some drivers
need to access it after spi_unregister_controller() to perform further
teardown steps.

Introduce devm_spi_alloc_master() and devm_spi_alloc_slave(), which
release a reference on the spi_controller struct only after the driver
has unbound, thereby keeping the memory allocation accessible.  Change
spi_unregister_controller() to not release a reference if the
spi_controller was allocated by one of these new devm functions.

The present commit is small enough to be backportable to stable.
It allows fixing drivers which use the private data in their ->remove()
hook after it's been freed.  It also allows fixing drivers which neglect
to release a reference on the spi_controller in the probe error path.

Long-term, most SPI drivers shall be moved over to the devm functions
introduced herein.  The few that can't shall be changed in a treewide
commit to explicitly release the last reference on the controller.
That commit shall amend spi_unregister_controller() to no longer release
a reference, thereby completing the migration.

As a result, the behaviour will be less surprising and more consistent
with subsystems such as IIO, which also includes the private data in the
allocation of the generic iio_dev struct, but calls device_del() in
iio_device_unregister().

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/272bae2ef08abd21388c98e23729886663d19192.1605121038.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/spi/spi.c       |   58 +++++++++++++++++++++++++++++++++++++++++++++++-
 include/linux/spi/spi.h |   19 +++++++++++++++
 2 files changed, 76 insertions(+), 1 deletion(-)

--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -2050,6 +2050,49 @@ struct spi_controller *__spi_alloc_contr
 }
 EXPORT_SYMBOL_GPL(__spi_alloc_controller);
 
+static void devm_spi_release_controller(struct device *dev, void *ctlr)
+{
+	spi_controller_put(*(struct spi_controller **)ctlr);
+}
+
+/**
+ * __devm_spi_alloc_controller - resource-managed __spi_alloc_controller()
+ * @dev: physical device of SPI controller
+ * @size: how much zeroed driver-private data to allocate
+ * @slave: whether to allocate an SPI master (false) or SPI slave (true)
+ * Context: can sleep
+ *
+ * Allocate an SPI controller and automatically release a reference on it
+ * when @dev is unbound from its driver.  Drivers are thus relieved from
+ * having to call spi_controller_put().
+ *
+ * The arguments to this function are identical to __spi_alloc_controller().
+ *
+ * Return: the SPI controller structure on success, else NULL.
+ */
+struct spi_controller *__devm_spi_alloc_controller(struct device *dev,
+						   unsigned int size,
+						   bool slave)
+{
+	struct spi_controller **ptr, *ctlr;
+
+	ptr = devres_alloc(devm_spi_release_controller, sizeof(*ptr),
+			   GFP_KERNEL);
+	if (!ptr)
+		return NULL;
+
+	ctlr = __spi_alloc_controller(dev, size, slave);
+	if (ctlr) {
+		*ptr = ctlr;
+		devres_add(dev, ptr);
+	} else {
+		devres_free(ptr);
+	}
+
+	return ctlr;
+}
+EXPORT_SYMBOL_GPL(__devm_spi_alloc_controller);
+
 #ifdef CONFIG_OF
 static int of_spi_register_master(struct spi_controller *ctlr)
 {
@@ -2300,6 +2343,11 @@ int devm_spi_register_controller(struct
 }
 EXPORT_SYMBOL_GPL(devm_spi_register_controller);
 
+static int devm_spi_match_controller(struct device *dev, void *res, void *ctlr)
+{
+	return *(struct spi_controller **)res == ctlr;
+}
+
 static int __unregister(struct device *dev, void *null)
 {
 	spi_unregister_device(to_spi_device(dev));
@@ -2341,7 +2389,15 @@ void spi_unregister_controller(struct sp
 	list_del(&ctlr->list);
 	mutex_unlock(&board_lock);
 
-	device_unregister(&ctlr->dev);
+	device_del(&ctlr->dev);
+
+	/* Release the last reference on the controller if its driver
+	 * has not yet been converted to devm_spi_alloc_master/slave().
+	 */
+	if (!devres_find(ctlr->dev.parent, devm_spi_release_controller,
+			 devm_spi_match_controller, ctlr))
+		put_device(&ctlr->dev);
+
 	/* free bus id */
 	mutex_lock(&board_lock);
 	if (found == ctlr)
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -634,6 +634,25 @@ static inline struct spi_controller *spi
 	return __spi_alloc_controller(host, size, true);
 }
 
+struct spi_controller *__devm_spi_alloc_controller(struct device *dev,
+						   unsigned int size,
+						   bool slave);
+
+static inline struct spi_controller *devm_spi_alloc_master(struct device *dev,
+							   unsigned int size)
+{
+	return __devm_spi_alloc_controller(dev, size, false);
+}
+
+static inline struct spi_controller *devm_spi_alloc_slave(struct device *dev,
+							  unsigned int size)
+{
+	if (!IS_ENABLED(CONFIG_SPI_SLAVE))
+		return NULL;
+
+	return __devm_spi_alloc_controller(dev, size, true);
+}
+
 extern int spi_register_controller(struct spi_controller *ctlr);
 extern int devm_spi_register_controller(struct device *dev,
 					struct spi_controller *ctlr);

[PATCH 4.19 30/39] spi: bcm-qspi: Fix use-after-free on unbind

[Greg Kroah-Hartman]

From: Lukas Wunner <lukas@wunner.de>

commit 63c5395bb7a9777a33f0e7b5906f2c0170a23692 upstream

bcm_qspi_remove() calls spi_unregister_master() even though
bcm_qspi_probe() calls devm_spi_register_master().  The spi_master is
therefore unregistered and freed twice on unbind.

Moreover, since commit 0392727c261b ("spi: bcm-qspi: Handle clock probe
deferral"), bcm_qspi_probe() leaks the spi_master allocation if the call
to devm_clk_get_optional() fails.

Fix by switching over to the new devm_spi_alloc_master() helper which
keeps the private data accessible until the driver has unbound and also
avoids the spi_master leak on probe.

While at it, fix an ordering issue in bcm_qspi_remove() wherein
spi_unregister_master() is called after uninitializing the hardware,
disabling the clock and freeing an IRQ data structure.  The correct
order is to call spi_unregister_master() *before* those teardown steps
because bus accesses may still be ongoing until that function returns.

Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: <stable@vger.kernel.org> # v4.9+: 123456789abc: spi: Introduce device-managed SPI controller allocation
Cc: <stable@vger.kernel.org> # v4.9+
Cc: Kamal Dasu <kdasu.kdev@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/5e31a9a59fd1c0d0b795b2fe219f25e5ee855f9d.1605121038.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/spi/spi-bcm-qspi.c |   34 ++++++++++++----------------------
 1 file changed, 12 insertions(+), 22 deletions(-)

--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -1223,7 +1223,7 @@ int bcm_qspi_probe(struct platform_devic
 	if (!of_match_node(bcm_qspi_of_match, dev->of_node))
 		return -ENODEV;
 
-	master = spi_alloc_master(dev, sizeof(struct bcm_qspi));
+	master = devm_spi_alloc_master(dev, sizeof(struct bcm_qspi));
 	if (!master) {
 		dev_err(dev, "error allocating spi_master\n");
 		return -ENOMEM;
@@ -1257,21 +1257,17 @@ int bcm_qspi_probe(struct platform_devic
 
 	if (res) {
 		qspi->base[MSPI]  = devm_ioremap_resource(dev, res);
-		if (IS_ERR(qspi->base[MSPI])) {
-			ret = PTR_ERR(qspi->base[MSPI]);
-			goto qspi_resource_err;
-		}
+		if (IS_ERR(qspi->base[MSPI]))
+			return PTR_ERR(qspi->base[MSPI]);
 	} else {
-		goto qspi_resource_err;
+		return 0;
 	}
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "bspi");
 	if (res) {
 		qspi->base[BSPI]  = devm_ioremap_resource(dev, res);
-		if (IS_ERR(qspi->base[BSPI])) {
-			ret = PTR_ERR(qspi->base[BSPI]);
-			goto qspi_resource_err;
-		}
+		if (IS_ERR(qspi->base[BSPI]))
+			return PTR_ERR(qspi->base[BSPI]);
 		qspi->bspi_mode = true;
 	} else {
 		qspi->bspi_mode = false;
@@ -1282,18 +1278,14 @@ int bcm_qspi_probe(struct platform_devic
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cs_reg");
 	if (res) {
 		qspi->base[CHIP_SELECT]  = devm_ioremap_resource(dev, res);
-		if (IS_ERR(qspi->base[CHIP_SELECT])) {
-			ret = PTR_ERR(qspi->base[CHIP_SELECT]);
-			goto qspi_resource_err;
-		}
+		if (IS_ERR(qspi->base[CHIP_SELECT]))
+			return PTR_ERR(qspi->base[CHIP_SELECT]);
 	}
 
 	qspi->dev_ids = kcalloc(num_irqs, sizeof(struct bcm_qspi_dev_id),
 				GFP_KERNEL);
-	if (!qspi->dev_ids) {
-		ret = -ENOMEM;
-		goto qspi_resource_err;
-	}
+	if (!qspi->dev_ids)
+		return -ENOMEM;
 
 	for (val = 0; val < num_irqs; val++) {
 		irq = -1;
@@ -1369,7 +1361,7 @@ int bcm_qspi_probe(struct platform_devic
 	qspi->xfer_mode.addrlen = -1;
 	qspi->xfer_mode.hp = -1;
 
-	ret = devm_spi_register_master(&pdev->dev, master);
+	ret = spi_register_master(master);
 	if (ret < 0) {
 		dev_err(dev, "can't register master\n");
 		goto qspi_reg_err;
@@ -1382,8 +1374,6 @@ qspi_reg_err:
 	clk_disable_unprepare(qspi->clk);
 qspi_probe_err:
 	kfree(qspi->dev_ids);
-qspi_resource_err:
-	spi_master_put(master);
 	return ret;
 }
 /* probe function to be called by SoC specific platform driver probe */
@@ -1393,10 +1383,10 @@ int bcm_qspi_remove(struct platform_devi
 {
 	struct bcm_qspi *qspi = platform_get_drvdata(pdev);
 
+	spi_unregister_master(qspi->master);
 	bcm_qspi_hw_uninit(qspi);
 	clk_disable_unprepare(qspi->clk);
 	kfree(qspi->dev_ids);
-	spi_unregister_master(qspi->master);
 
 	return 0;
 }

[PATCH 4.19 31/39] spi: bcm2835: Fix use-after-free on unbind

[Greg Kroah-Hartman]

From: Lukas Wunner <lukas@wunner.de>

[ Upstream commit e1483ac030fb4c57734289742f1c1d38dca61e22 ]

bcm2835_spi_remove() accesses the driver's private data after calling
spi_unregister_controller() even though that function releases the last
reference on the spi_controller and thereby frees the private data.

Fix by switching over to the new devm_spi_alloc_master() helper which
keeps the private data accessible until the driver has unbound.

Fixes: f8043872e796 ("spi: add driver for BCM2835")
Reported-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: <stable@vger.kernel.org> # v3.10+: 5e844cc37a5c: spi: Introduce device-managed SPI controller allocation
Cc: <stable@vger.kernel.org> # v3.10+
Cc: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/ad66e0a0ad96feb848814842ecf5b6a4539ef35c.1605121038.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/spi/spi-bcm2835.c |   15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)

--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -737,7 +737,7 @@ static int bcm2835_spi_probe(struct plat
 	struct resource *res;
 	int err;
 
-	master = spi_alloc_master(&pdev->dev, sizeof(*bs));
+	master = devm_spi_alloc_master(&pdev->dev, sizeof(*bs));
 	if (!master) {
 		dev_err(&pdev->dev, "spi_alloc_master() failed\n");
 		return -ENOMEM;
@@ -759,23 +759,20 @@ static int bcm2835_spi_probe(struct plat
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	bs->regs = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(bs->regs)) {
-		err = PTR_ERR(bs->regs);
-		goto out_master_put;
-	}
+	if (IS_ERR(bs->regs))
+		return PTR_ERR(bs->regs);
 
 	bs->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(bs->clk)) {
 		err = PTR_ERR(bs->clk);
 		dev_err(&pdev->dev, "could not get clk: %d\n", err);
-		goto out_master_put;
+		return err;
 	}
 
 	bs->irq = platform_get_irq(pdev, 0);
 	if (bs->irq <= 0) {
 		dev_err(&pdev->dev, "could not get IRQ: %d\n", bs->irq);
-		err = bs->irq ? bs->irq : -ENODEV;
-		goto out_master_put;
+		return bs->irq ? bs->irq : -ENODEV;
 	}
 
 	clk_prepare_enable(bs->clk);
@@ -803,8 +800,6 @@ static int bcm2835_spi_probe(struct plat
 
 out_clk_disable:
 	clk_disable_unprepare(bs->clk);
-out_master_put:
-	spi_master_put(master);
 	return err;
 }
 

[PATCH 4.19 32/39] spi: bcm2835: Release the DMA channel if probe fails after dma_init

[Greg Kroah-Hartman]

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

[ Upstream commit 666224b43b4bd4612ce3b758c038f9bc5c5e3fcb ]

The DMA channel was not released if either devm_request_irq() or
devm_spi_register_controller() failed.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20191212135550.4634-3-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
[lukas: backport to 4.19-stable]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/spi/spi-bcm2835.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -787,18 +787,19 @@ static int bcm2835_spi_probe(struct plat
 			       dev_name(&pdev->dev), master);
 	if (err) {
 		dev_err(&pdev->dev, "could not request IRQ: %d\n", err);
-		goto out_clk_disable;
+		goto out_dma_release;
 	}
 
 	err = spi_register_master(master);
 	if (err) {
 		dev_err(&pdev->dev, "could not register SPI master: %d\n", err);
-		goto out_clk_disable;
+		goto out_dma_release;
 	}
 
 	return 0;
 
-out_clk_disable:
+out_dma_release:
+	bcm2835_dma_release(master);
 	clk_disable_unprepare(bs->clk);
 	return err;
 }

[PATCH 4.19 33/39] tracing: Fix userstacktrace option for instances

[Greg Kroah-Hartman]

From: Steven Rostedt (VMware) <rostedt@goodmis.org>

commit bcee5278958802b40ee8b26679155a6d9231783e upstream.

When the instances were able to use their own options, the userstacktrace
option was left hardcoded for the top level. This made the instance
userstacktrace option bascially into a nop, and will confuse users that set
it, but nothing happens (I was confused when it happened to me!)

Cc: stable@vger.kernel.org
Fixes: 16270145ce6b ("tracing: Add trace options for core options to instances")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/trace.c |    7 ++++---
 kernel/trace/trace.h |    6 ++++--
 2 files changed, 8 insertions(+), 5 deletions(-)

--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -2416,7 +2416,7 @@ void trace_buffer_unlock_commit_regs(str
 	 * two. They are not that meaningful.
 	 */
 	ftrace_trace_stack(tr, buffer, flags, regs ? 0 : STACK_SKIP, pc, regs);
-	ftrace_trace_userstack(buffer, flags, pc);
+	ftrace_trace_userstack(tr, buffer, flags, pc);
 }
 
 /*
@@ -2736,14 +2736,15 @@ void trace_dump_stack(int skip)
 static DEFINE_PER_CPU(int, user_stack_count);
 
 void
-ftrace_trace_userstack(struct ring_buffer *buffer, unsigned long flags, int pc)
+ftrace_trace_userstack(struct trace_array *tr,
+		       struct ring_buffer *buffer, unsigned long flags, int pc)
 {
 	struct trace_event_call *call = &event_user_stack;
 	struct ring_buffer_event *event;
 	struct userstack_entry *entry;
 	struct stack_trace trace;
 
-	if (!(global_trace.trace_flags & TRACE_ITER_USERSTACKTRACE))
+	if (!(tr->trace_flags & TRACE_ITER_USERSTACKTRACE))
 		return;
 
 	/*
--- a/kernel/trace/trace.h
+++ b/kernel/trace/trace.h
@@ -745,13 +745,15 @@ void update_max_tr_single(struct trace_a
 #endif /* CONFIG_TRACER_MAX_TRACE */
 
 #ifdef CONFIG_STACKTRACE
-void ftrace_trace_userstack(struct ring_buffer *buffer, unsigned long flags,
+void ftrace_trace_userstack(struct trace_array *tr,
+			    struct ring_buffer *buffer, unsigned long flags,
 			    int pc);
 
 void __trace_stack(struct trace_array *tr, unsigned long flags, int skip,
 		   int pc);
 #else
-static inline void ftrace_trace_userstack(struct ring_buffer *buffer,
+static inline void ftrace_trace_userstack(struct trace_array *tr,
+					  struct ring_buffer *buffer,
 					  unsigned long flags, int pc)
 {
 }

[PATCH 4.19 34/39] gfs2: check for empty rgrp tree in gfs2_ri_update

[Greg Kroah-Hartman]

From: Bob Peterson <rpeterso@redhat.com>

commit 778721510e84209f78e31e2ccb296ae36d623f5e upstream.

If gfs2 tries to mount a (corrupt) file system that has no resource
groups it still tries to set preferences on the first one, which causes
a kernel null pointer dereference. This patch adds a check to function
gfs2_ri_update so this condition is detected and reported back as an
error.

Reported-by: syzbot+e3f23ce40269a4c9053a@syzkaller.appspotmail.com
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/gfs2/rgrp.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -1009,6 +1009,10 @@ static int gfs2_ri_update(struct gfs2_in
 	if (error < 0)
 		return error;
 
+	if (RB_EMPTY_ROOT(&sdp->sd_rindex_tree)) {
+		fs_err(sdp, "no resource groups found in the file system.\n");
+		return -ENOENT;
+	}
 	set_rgrp_preferences(sdp);
 
 	sdp->sd_rindex_uptodate = 1;

[PATCH 4.19 35/39] i2c: qup: Fix error return code in qup_i2c_bam_schedule_desc()

[Greg Kroah-Hartman]

From: Zhihao Cheng <chengzhihao1@huawei.com>

commit e9acf0298c664f825e6f1158f2a97341bf9e03ca upstream.

Fix to return the error code from qup_i2c_change_state()
instaed of 0 in qup_i2c_bam_schedule_desc().

Fixes: fbf9921f8b35d9b2 ("i2c: qup: Fix error handling")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/i2c/busses/i2c-qup.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -806,7 +806,8 @@ static int qup_i2c_bam_schedule_desc(str
 	if (ret || qup->bus_err || qup->qup_err) {
 		reinit_completion(&qup->xfer);
 
-		if (qup_i2c_change_state(qup, QUP_RUN_STATE)) {
+		ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
+		if (ret) {
 			dev_err(qup->dev, "change to run state timed out");
 			goto desc_err;
 		}

[PATCH 4.19 36/39] dm writecache: remove BUG() and fail gracefully instead

[Greg Kroah-Hartman]

From: Mike Snitzer <snitzer@redhat.com>

commit 857c4c0a8b2888d806f4308c58f59a6a81a1dee9 upstream.

Building on arch/s390/ results in this build error:

cc1: some warnings being treated as errors
../drivers/md/dm-writecache.c: In function 'persistent_memory_claim':
../drivers/md/dm-writecache.c:323:1: error: no return statement in function returning non-void [-Werror=return-type]

Fix this by replacing the BUG() with an -EOPNOTSUPP return.

Fixes: 48debafe4f2f ("dm: add writecache target")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-writecache.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/md/dm-writecache.c
+++ b/drivers/md/dm-writecache.c
@@ -318,7 +318,7 @@ err1:
 #else
 static int persistent_memory_claim(struct dm_writecache *wc)
 {
-	BUG();
+	return -EOPNOTSUPP;
 }
 #endif
 

[PATCH 4.19 37/39] Input: i8042 - fix error return code in i8042_setup_aux()

[Greg Kroah-Hartman]

From: Luo Meng <luomeng12@huawei.com>

commit 855b69857830f8d918d715014f05e59a3f7491a0 upstream.

Fix to return a negative error code from the error handling case
instead of 0 in function i8042_setup_aux(), as done elsewhere in this
function.

Fixes: f81134163fc7 ("Input: i8042 - use platform_driver_probe")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201123133420.4071187-1-luomeng12@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/serio/i8042.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -1472,7 +1472,8 @@ static int __init i8042_setup_aux(void)
 	if (error)
 		goto err_free_ports;
 
-	if (aux_enable())
+	error = aux_enable();
+	if (error)
 		goto err_free_irq;
 
 	i8042_aux_irq_registered = true;

[PATCH 4.19 38/39] netfilter: nf_tables: avoid false-postive lockdep splat

[Greg Kroah-Hartman]

From: Florian Westphal <fw@strlen.de>

commit c0700dfa2cae44c033ed97dade8a2679c7d22a9d upstream.

There are reports wrt lockdep splat in nftables, e.g.:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 31416 at net/netfilter/nf_tables_api.c:622
lockdep_nfnl_nft_mutex_not_held+0x28/0x38 [nf_tables]
...

These are caused by an earlier, unrelated bug such as a n ABBA deadlock
in a different subsystem.
In such an event, lockdep is disabled and lockdep_is_held returns true
unconditionally.  This then causes the WARN() in nf_tables.

Make the WARN conditional on lockdep still active to avoid this.

Fixes: f102d66b335a417 ("netfilter: nf_tables: use dedicated mutex to guard transactions")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://lore.kernel.org/linux-kselftest/CA+G9fYvFUpODs+NkSYcnwKnXm62tmP=ksLeBPmB+KFrB2rvCtQ@mail.gmail.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/nf_tables_api.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -532,7 +532,8 @@ static void nft_request_module(struct ne
 static void lockdep_nfnl_nft_mutex_not_held(void)
 {
 #ifdef CONFIG_PROVE_LOCKING
-	WARN_ON_ONCE(lockdep_nfnl_is_held(NFNL_SUBSYS_NFTABLES));
+	if (debug_locks)
+		WARN_ON_ONCE(lockdep_nfnl_is_held(NFNL_SUBSYS_NFTABLES));
 #endif
 }
 

[PATCH 4.19 39/39] x86/insn-eval: Use new for_each_insn_prefix() macro to loop over prefixes bytes

[Greg Kroah-Hartman]

From: Masami Hiramatsu <mhiramat@kernel.org>

commit 12cb908a11b2544b5f53e9af856e6b6a90ed5533 upstream

Since insn.prefixes.nbytes can be bigger than the size of
insn.prefixes.bytes[] when a prefix is repeated, the proper check must
be

  insn.prefixes.bytes[i] != 0 and i < 4

instead of using insn.prefixes.nbytes. Use the new
for_each_insn_prefix() macro which does it correctly.

Debugged by Kees Cook <keescook@chromium.org>.

 [ bp: Massage commit message. ]

Fixes: 32d0b95300db ("x86/insn-eval: Add utility functions to get segment selector")
Reported-by: syzbot+9b64b619f10f19d19a7c@syzkaller.appspotmail.com
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/160697104969.3146288.16329307586428270032.stgit@devnote2
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/lib/insn-eval.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/arch/x86/lib/insn-eval.c
+++ b/arch/x86/lib/insn-eval.c
@@ -70,14 +70,15 @@ static int get_seg_reg_override_idx(stru
 {
 	int idx = INAT_SEG_REG_DEFAULT;
 	int num_overrides = 0, i;
+	insn_byte_t p;
 
 	insn_get_prefixes(insn);
 
 	/* Look for any segment override prefixes. */
-	for (i = 0; i < insn->prefixes.nbytes; i++) {
+	for_each_insn_prefix(insn, i, p) {
 		insn_attr_t attr;
 
-		attr = inat_get_opcode_attribute(insn->prefixes.bytes[i]);
+		attr = inat_get_opcode_attribute(p);
 		switch (attr) {
 		case INAT_MAKE_PREFIX(INAT_PFX_CS):
 			idx = INAT_SEG_REG_CS;

Re: [PATCH 4.19 00/39] 4.19.163-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 624 bytes --]

On Thu 2020-12-10 15:26:39, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.163 release.
> There are 39 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

CIP testing did not find any problems here.

Tested-by: Pavel Machek (CIP) <pavel@denx.de>

Best regards,
                                                                Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

Re: [PATCH 4.19 00/39] 4.19.163-rc1 review

[Shuah Khan]

On 12/10/20 7:26 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.163 release.
> There are 39 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 12 Dec 2020 14:25:47 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.163-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 4.19 00/39] 4.19.163-rc1 review

[Guenter Roeck]

On Thu, Dec 10, 2020 at 03:26:39PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.163 release.
> There are 39 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 12 Dec 2020 14:25:47 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 155 pass: 155 fail: 0
Qemu test results:
	total: 417 pass: 417 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 4.19 00/39] 4.19.163-rc1 review

[Naresh Kamboju]

On Thu, 10 Dec 2020 at 20:05, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.19.163 release.
> There are 39 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 12 Dec 2020 14:25:47 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.163-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h


Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

Summary
------------------------------------------------------------------------

kernel: 4.19.163-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.19.y
git commit: a1b1c60de6b977bc1a2fc8176b647879030ab862
git describe: v4.19.162-41-ga1b1c60de6b9
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.19.y/build/v4.19.162-41-ga1b1c60de6b9

No regressions (compared to build v4.19.162)

No fixes (compared to build v4.19.162)

Ran 43756 total tests in the following environments and test suites.

Environments
--------------
- arm
- arm64
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- juno-r2-compat
- juno-r2-kasan
- mips
- nxp-ls2088
- qemu-arm64-clang
- qemu-arm64-kasan
- qemu-x86_64-clang
- qemu-x86_64-kasan
- qemu_arm
- qemu_arm64
- qemu_arm64-compat
- qemu_i386
- qemu_x86_64
- qemu_x86_64-compat
- s390
- sparc
- x15 - arm
- x86_64
- x86-kasan

Test Suites
-----------
* build
* linux-log-parser
* install-android-platform-tools-r2600
* libhugetlbfs
* ltp-controllers-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-sched-tests
* kselftest
* ltp-cap_bounds-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-ipc-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* perf
* v4l2-compliance
* ltp-commands-tests
* ltp-fs-tests
* ltp-math-tests
* ltp-open-posix-tests
* kvm-unit-tests
* rcutorture
* fwts

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.19 15/39] ALSA: hda/generic: Add option to enforce preferred_dacs pairs

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 881 bytes --]

Hi!

> From: Takashi Iwai <tiwai@suse.de>
> 
> commit 242d990c158d5b1dabd166516e21992baef5f26a upstream.
> 
> The generic parser accepts the preferred_dacs[] pairs as a hint for
> assigning a DAC to each pin, but this hint doesn't work always
> effectively.  Currently it's merely a secondary choice after the trial
> with the path index failed.  This made sometimes it difficult to
> assign DACs without mimicking the connection list and/or the badness
> table.
> 
> This patch adds a new flag, obey_preferred_dacs, that changes the
> behavior of the parser.  As its name stands, the parser obeys the

Option added is never used as variable is never set. We don't need
this in 4.19.

Best regards,
								Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 4.19 15/39] ALSA: hda/generic: Add option to enforce preferred_dacs pairs

[Takashi Iwai]

On Fri, 11 Dec 2020 09:36:21 +0100,
Pavel Machek wrote:
> 
> Hi!
> 
> > From: Takashi Iwai <tiwai@suse.de>
> > 
> > commit 242d990c158d5b1dabd166516e21992baef5f26a upstream.
> > 
> > The generic parser accepts the preferred_dacs[] pairs as a hint for
> > assigning a DAC to each pin, but this hint doesn't work always
> > effectively.  Currently it's merely a secondary choice after the trial
> > with the path index failed.  This made sometimes it difficult to
> > assign DACs without mimicking the connection list and/or the badness
> > table.
> > 
> > This patch adds a new flag, obey_preferred_dacs, that changes the
> > behavior of the parser.  As its name stands, the parser obeys the
> 
> Option added is never used as variable is never set. We don't need
> this in 4.19.

Right, it seems that the succeeding fix is queued only for 5.4 and
5.9.

OTOH, this change will help if another quirk is added in near future,
and it's pretty safe to apply, so I think it's worth to keep it.


thanks,

Takashi

Re: [PATCH 4.19 00/39] 4.19.163-rc1 review

[Greg Kroah-Hartman]

On Thu, Dec 10, 2020 at 10:06:52PM +0100, Pavel Machek wrote:
> On Thu 2020-12-10 15:26:39, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.19.163 release.
> > There are 39 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> 
> CIP testing did not find any problems here.
> 
> Tested-by: Pavel Machek (CIP) <pavel@denx.de>

Thanks for testing and letting me know.

greg k-h

Re: [PATCH 4.19 37/39] Input: i8042 - fix error return code in i8042_setup_aux()

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1117 bytes --]

Hi!

> From: Luo Meng <luomeng12@huawei.com>
> 
> commit 855b69857830f8d918d715014f05e59a3f7491a0 upstream.
> 
> Fix to return a negative error code from the error handling case
> instead of 0 in function i8042_setup_aux(), as done elsewhere in this
> function.
> 
> Fixes: f81134163fc7 ("Input: i8042 - use platform_driver_probe")

I'd recommend not taking this. It is not known to fix
end-user-visible-bug, i8042 is normally quite fragile, and the patch
is less then month old so did not get adequate testing.

Yes, code looks cleaner after the fix. With i8042, that does not mean
much.

Best regards,
								Pavel


> --- a/drivers/input/serio/i8042.c
> +++ b/drivers/input/serio/i8042.c
> @@ -1472,7 +1472,8 @@ static int __init i8042_setup_aux(void)
>  	if (error)
>  		goto err_free_ports;
>  
> -	if (aux_enable())
> +	error = aux_enable();
> +	if (error)
>  		goto err_free_irq;
>  
>  	i8042_aux_irq_registered = true;
> 

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

Re: [PATCH 4.19 15/39] ALSA: hda/generic: Add option to enforce preferred_dacs pairs

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1307 bytes --]

Hi!

> > > From: Takashi Iwai <tiwai@suse.de>
> > > 
> > > commit 242d990c158d5b1dabd166516e21992baef5f26a upstream.
> > > 
> > > The generic parser accepts the preferred_dacs[] pairs as a hint for
> > > assigning a DAC to each pin, but this hint doesn't work always
> > > effectively.  Currently it's merely a secondary choice after the trial
> > > with the path index failed.  This made sometimes it difficult to
> > > assign DACs without mimicking the connection list and/or the badness
> > > table.
> > > 
> > > This patch adds a new flag, obey_preferred_dacs, that changes the
> > > behavior of the parser.  As its name stands, the parser obeys the
> > 
> > Option added is never used as variable is never set. We don't need
> > this in 4.19.
> 
> Right, it seems that the succeeding fix is queued only for 5.4 and
> 5.9.
> 
> OTOH, this change will help if another quirk is added in near future,
> and it's pretty safe to apply, so I think it's worth to keep it.

I agree that this is safe to apply and makes sense if we get another
quirk soon. OTOH it is trivial to backport if it is needed.

Best regards,

								Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

Re: [PATCH 4.19 15/39] ALSA: hda/generic: Add option to enforce preferred_dacs pairs

[Takashi Iwai]

On Fri, 11 Dec 2020 23:38:22 +0100,
Pavel Machek wrote:
> 
> Hi!
> 
> > > > From: Takashi Iwai <tiwai@suse.de>
> > > > 
> > > > commit 242d990c158d5b1dabd166516e21992baef5f26a upstream.
> > > > 
> > > > The generic parser accepts the preferred_dacs[] pairs as a hint for
> > > > assigning a DAC to each pin, but this hint doesn't work always
> > > > effectively.  Currently it's merely a secondary choice after the trial
> > > > with the path index failed.  This made sometimes it difficult to
> > > > assign DACs without mimicking the connection list and/or the badness
> > > > table.
> > > > 
> > > > This patch adds a new flag, obey_preferred_dacs, that changes the
> > > > behavior of the parser.  As its name stands, the parser obeys the
> > > 
> > > Option added is never used as variable is never set. We don't need
> > > this in 4.19.
> > 
> > Right, it seems that the succeeding fix is queued only for 5.4 and
> > 5.9.
> > 
> > OTOH, this change will help if another quirk is added in near future,
> > and it's pretty safe to apply, so I think it's worth to keep it.
> 
> I agree that this is safe to apply and makes sense if we get another
> quirk soon. OTOH it is trivial to backport if it is needed.

It's trivial to backport, but it's not trivial to let stable
maintainers to inform beforehand if the next patch has CC-to-stable
tag.  Keeping this makes the backport easier, that's the point.


thanks,

Takashi