* [PATCH v2 0/2] dt-bindings: media: Convert video-interfaces.txt to schemas
@ 2020-12-10 21:16 Rob Herring
2020-12-10 21:16 ` [PATCH v2 1/2] media: dt-bindings: Convert video-interfaces.txt properties " Rob Herring
` (5 more replies)
0 siblings, 6 replies; 21+ messages in thread
From: Rob Herring @ 2020-12-10 21:16 UTC (permalink / raw)
To: Guennadi Liakhovetski, Sakari Ailus, Maxime Ripard,
Mauro Carvalho Chehab, Jacopo Mondi, Laurent Pinchart
Cc: devicetree, linux-kernel, linux-media
This series converts video-interfaces.txt to DT schema which in turn is
based on converting the graph binding to a schema. All the media users
are converted to use the graph and video-interfaces schemas.
Based on media tree commit a3f132df0e5f. This is dependent on dt-schema
changes not yet committed[1]. Please review those too.
Rob
[1] https://github.com/devicetree-org/dt-schema/tree/of-graph
Rob Herring (2):
media: dt-bindings: Convert video-interfaces.txt properties to schemas
dt-bindings: media: Use graph and video-interfaces schemas
.../media/allwinner,sun4i-a10-csi.yaml | 11 +-
.../media/allwinner,sun6i-a31-csi.yaml | 12 +-
.../bindings/media/i2c/adv7180.yaml | 35 +-
.../bindings/media/i2c/adv7604.yaml | 37 +-
.../bindings/media/i2c/aptina,mt9v111.yaml | 4 +-
.../bindings/media/i2c/imi,rdacm2x-gmsl.yaml | 30 +-
.../devicetree/bindings/media/i2c/imx219.yaml | 21 +-
.../bindings/media/i2c/maxim,max9286.yaml | 101 +--
.../devicetree/bindings/media/i2c/ov5647.yaml | 20 +-
.../devicetree/bindings/media/i2c/ov8856.yaml | 21 +-
.../bindings/media/i2c/ovti,ov2680.yaml | 6 +-
.../bindings/media/i2c/ovti,ov772x.yaml | 9 +-
.../bindings/media/i2c/sony,imx214.yaml | 25 +-
.../bindings/media/i2c/sony,imx274.yaml | 3 +-
.../bindings/media/marvell,mmp2-ccic.yaml | 15 +-
.../bindings/media/nxp,imx7-csi.yaml | 5 +-
.../bindings/media/nxp,imx7-mipi-csi2.yaml | 32 +-
.../bindings/media/renesas,ceu.yaml | 17 +-
.../bindings/media/renesas,csi2.yaml | 54 +-
.../bindings/media/renesas,vin.yaml | 113 +---
.../bindings/media/rockchip-isp1.yaml | 40 +-
.../bindings/media/st,stm32-dcmi.yaml | 18 +-
.../devicetree/bindings/media/ti,cal.yaml | 55 +-
.../media/video-interface-devices.yaml | 405 +++++++++++
.../bindings/media/video-interfaces.txt | 640 +-----------------
.../bindings/media/video-interfaces.yaml | 344 ++++++++++
.../bindings/media/xilinx/xlnx,csi2rxss.yaml | 39 +-
27 files changed, 901 insertions(+), 1211 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/video-interface-devices.yaml
create mode 100644 Documentation/devicetree/bindings/media/video-interfaces.yaml
--
2.25.1
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v2 1/2] media: dt-bindings: Convert video-interfaces.txt properties to schemas
2020-12-10 21:16 [PATCH v2 0/2] dt-bindings: media: Convert video-interfaces.txt to schemas Rob Herring
@ 2020-12-10 21:16 ` Rob Herring
2020-12-16 10:18 ` Guennadi Liakhovetski
2020-12-10 21:16 ` [PATCH v2 2/2] dt-bindings: media: Use graph and video-interfaces schemas Rob Herring
` (4 subsequent siblings)
5 siblings, 1 reply; 21+ messages in thread
From: Rob Herring @ 2020-12-10 21:16 UTC (permalink / raw)
To: Guennadi Liakhovetski, Sakari Ailus, Maxime Ripard,
Mauro Carvalho Chehab, Jacopo Mondi, Laurent Pinchart
Cc: devicetree, linux-kernel, linux-media
Convert video-interfaces.txt to DT schema. As it contains a mixture of
device level and endpoint properties, split it up into 2 schemas.
Binding schemas will need to reference both the graph.yaml and
video-interfaces.yaml schemas. The exact schema depends on how many
ports and endpoints for the binding. A single port with a single
endpoint looks similar to this:
port:
$ref: /schemas/graph.yaml#/$defs/port-base
properties:
endpoint:
$ref: video-interfaces.yaml#
unevaluatedProperties: false
properties:
bus-width:
enum: [ 8, 10, 12, 16 ]
pclk-sample: true
hsync-active: true
vsync-active: true
required:
- bus-width
additionalProperties: false
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Rob Herring <robh@kernel.org>
---
I need acks for dual licensing from the listed maintainers.
---
.../media/video-interface-devices.yaml | 405 +++++++++++
.../bindings/media/video-interfaces.txt | 640 +-----------------
.../bindings/media/video-interfaces.yaml | 344 ++++++++++
3 files changed, 750 insertions(+), 639 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/video-interface-devices.yaml
create mode 100644 Documentation/devicetree/bindings/media/video-interfaces.yaml
diff --git a/Documentation/devicetree/bindings/media/video-interface-devices.yaml b/Documentation/devicetree/bindings/media/video-interface-devices.yaml
new file mode 100644
index 000000000000..037b93d62651
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/video-interface-devices.yaml
@@ -0,0 +1,405 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/video-interface-devices.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common bindings for video receiver and transmitter devices
+
+maintainers:
+ - Jacopo Mondi <jacopo@jmondi.org>
+
+properties:
+ flash-leds:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ An array of phandles, each referring to a flash LED, a sub-node of the LED
+ driver device node.
+
+ lens-focus:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ A phandle to the node of the focus lens controller.
+
+ rotation:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 90, 180, 270 ]
+ description: |
+ The camera rotation is expressed as the angular difference in degrees
+ between two reference systems, one relative to the camera module, and one
+ defined on the external world scene to be captured when projected on the
+ image sensor pixel array.
+
+ A camera sensor has a 2-dimensional reference system 'Rc' defined by its
+ pixel array read-out order. The origin is set to the first pixel being
+ read out, the X-axis points along the column read-out direction towards
+ the last columns, and the Y-axis along the row read-out direction towards
+ the last row.
+
+ A typical example for a sensor with a 2592x1944 pixel array matrix
+ observed from the front is:
+
+ 2591 X-axis 0
+ <------------------------+ 0
+ .......... ... ..........!
+ .......... ... ..........! Y-axis
+ ... !
+ .......... ... ..........!
+ .......... ... ..........! 1943
+ V
+
+ The external world scene reference system 'Rs' is a 2-dimensional
+ reference system on the focal plane of the camera module. The origin is
+ placed on the top-left corner of the visible scene, the X-axis points
+ towards the right, and the Y-axis points towards the bottom of the scene.
+ The top, bottom, left and right directions are intentionally not defined
+ and depend on the environment in which the camera is used.
+
+ A typical example of a (very common) picture of a shark swimming from left
+ to right, as seen from the camera, is:
+
+ 0 X-axis
+ 0 +------------------------------------->
+ !
+ !
+ !
+ ! |\____)\___
+ ! ) _____ __`<
+ ! |/ )/
+ !
+ !
+ !
+ V
+ Y-axis
+
+ with the reference system 'Rs' placed on the camera focal plane:
+
+ ¸.·˙!
+ ¸.·˙ !
+ _ ¸.·˙ !
+ +-/ \-+¸.·˙ !
+ | (o) | ! Camera focal plane
+ +-----+˙·.¸ !
+ ˙·.¸ !
+ ˙·.¸ !
+ ˙·.¸!
+
+ When projected on the sensor's pixel array, the image and the associated
+ reference system 'Rs' are typically (but not always) inverted, due to the
+ camera module's lens optical inversion effect.
+
+ Assuming the above represented scene of the swimming shark, the lens
+ inversion projects the scene and its reference system onto the sensor
+ pixel array, seen from the front of the camera sensor, as follows:
+
+ Y-axis
+ ^
+ !
+ !
+ !
+ ! |\_____)\__
+ ! ) ____ ___.<
+ ! |/ )/
+ !
+ !
+ !
+ 0 +------------------------------------->
+ 0 X-axis
+
+ Note the shark being upside-down.
+
+ The resulting projected reference system is named 'Rp'.
+
+ The camera rotation property is then defined as the angular difference in
+ the counter-clockwise direction between the camera reference system 'Rc'
+ and the projected scene reference system 'Rp'. It is expressed in degrees
+ as a number in the range [0, 360[.
+
+ Examples
+
+ 0 degrees camera rotation:
+
+
+ Y-Rp
+ ^
+ Y-Rc !
+ ^ !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! 0 +------------------------------------->
+ ! 0 X-Rp
+ 0 +------------------------------------->
+ 0 X-Rc
+
+
+ X-Rc 0
+ <------------------------------------+ 0
+ X-Rp 0 !
+ <------------------------------------+ 0 !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! V
+ ! Y-Rc
+ V
+ Y-Rp
+
+ 90 degrees camera rotation:
+
+ 0 Y-Rc
+ 0 +-------------------->
+ ! Y-Rp
+ ! ^
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! 0 +------------------------------------->
+ ! 0 X-Rp
+ !
+ !
+ !
+ !
+ V
+ X-Rc
+
+ 180 degrees camera rotation:
+
+ 0
+ <------------------------------------+ 0
+ X-Rc !
+ Y-Rp !
+ ^ !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! V
+ ! Y-Rc
+ 0 +------------------------------------->
+ 0 X-Rp
+
+ 270 degrees camera rotation:
+
+ 0 Y-Rc
+ 0 +-------------------->
+ ! 0
+ ! <-----------------------------------+ 0
+ ! X-Rp !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! V
+ ! Y-Rp
+ !
+ !
+ !
+ !
+ V
+ X-Rc
+
+
+ Example one - Webcam
+
+ A camera module installed on the user facing part of a laptop screen
+ casing used for video calls. The captured images are meant to be displayed
+ in landscape mode (width > height) on the laptop screen.
+
+ The camera is typically mounted upside-down to compensate the lens optical
+ inversion effect:
+
+ Y-Rp
+ Y-Rc ^
+ ^ !
+ ! !
+ ! ! |\_____)\__
+ ! ! ) ____ ___.<
+ ! ! |/ )/
+ ! !
+ ! !
+ ! !
+ ! 0 +------------------------------------->
+ ! 0 X-Rp
+ 0 +------------------------------------->
+ 0 X-Rc
+
+ The two reference systems are aligned, the resulting camera rotation is
+ 0 degrees, no rotation correction needs to be applied to the resulting
+ image once captured to memory buffers to correctly display it to users:
+
+ +--------------------------------------+
+ ! !
+ ! !
+ ! !
+ ! |\____)\___ !
+ ! ) _____ __`< !
+ ! |/ )/ !
+ ! !
+ ! !
+ ! !
+ +--------------------------------------+
+
+ If the camera sensor is not mounted upside-down to compensate for the lens
+ optical inversion, the two reference systems will not be aligned, with
+ 'Rp' being rotated 180 degrees relatively to 'Rc':
+
+
+ X-Rc 0
+ <------------------------------------+ 0
+ !
+ Y-Rp !
+ ^ !
+ ! !
+ ! |\_____)\__ !
+ ! ) ____ ___.< !
+ ! |/ )/ !
+ ! !
+ ! !
+ ! V
+ ! Y-Rc
+ 0 +------------------------------------->
+ 0 X-Rp
+
+ The image once captured to memory will then be rotated by 180 degrees:
+
+ +--------------------------------------+
+ ! !
+ ! !
+ ! !
+ ! __/(_____/| !
+ ! >.___ ____ ( !
+ ! \( \| !
+ ! !
+ ! !
+ ! !
+ +--------------------------------------+
+
+ A software rotation correction of 180 degrees should be applied to
+ correctly display the image:
+
+ +--------------------------------------+
+ ! !
+ ! !
+ ! !
+ ! |\____)\___ !
+ ! ) _____ __`< !
+ ! |/ )/ !
+ ! !
+ ! !
+ ! !
+ +--------------------------------------+
+
+ Example two - Phone camera
+
+ A camera installed on the back side of a mobile device facing away from
+ the user. The captured images are meant to be displayed in portrait mode
+ (height > width) to match the device screen orientation and the device
+ usage orientation used when taking the picture.
+
+ The camera sensor is typically mounted with its pixel array longer side
+ aligned to the device longer side, upside-down mounted to compensate for
+ the lens optical inversion effect:
+
+ 0 Y-Rc
+ 0 +-------------------->
+ ! Y-Rp
+ ! ^
+ ! !
+ ! !
+ ! !
+ ! ! |\_____)\__
+ ! ! ) ____ ___.<
+ ! ! |/ )/
+ ! !
+ ! !
+ ! !
+ ! 0 +------------------------------------->
+ ! 0 X-Rp
+ !
+ !
+ !
+ !
+ V
+ X-Rc
+
+ The two reference systems are not aligned and the 'Rp' reference system is
+ rotated by 90 degrees in the counter-clockwise direction relatively to the
+ 'Rc' reference system.
+
+ The image once captured to memory will be rotated:
+
+ +-------------------------------------+
+ | _ _ |
+ | \ / |
+ | | | |
+ | | | |
+ | | > |
+ | < | |
+ | | | |
+ | . |
+ | V |
+ +-------------------------------------+
+
+ A correction of 90 degrees in counter-clockwise direction has to be
+ applied to correctly display the image in portrait mode on the device
+ screen:
+
+ +--------------------+
+ | |
+ | |
+ | |
+ | |
+ | |
+ | |
+ | |\____)\___ |
+ | ) _____ __`< |
+ | |/ )/ |
+ | |
+ | |
+ | |
+ | |
+ | |
+ +--------------------+
+
+ orientation:
+ description:
+ The orientation of a device (typically an image sensor or a flash LED)
+ describing its mounting position relative to the usage orientation of the
+ system where the device is installed on.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ # Front. The device is mounted on the front facing side of the system. For
+ # mobile devices such as smartphones, tablets and laptops the front side
+ # is the user facing side.
+ - 0
+ # Back. The device is mounted on the back side of the system, which is
+ # defined as the opposite side of the front facing one.
+ - 1
+ # External. The device is not attached directly to the system but is
+ # attached in a way that allows it to move freely.
+ - 2
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt
index 3920f25a9123..8fcf5f52bf5b 100644
--- a/Documentation/devicetree/bindings/media/video-interfaces.txt
+++ b/Documentation/devicetree/bindings/media/video-interfaces.txt
@@ -1,639 +1 @@
-Common bindings for video receiver and transmitter interfaces
-
-General concept
----------------
-
-Video data pipelines usually consist of external devices, e.g. camera sensors,
-controlled over an I2C, SPI or UART bus, and SoC internal IP blocks, including
-video DMA engines and video data processors.
-
-SoC internal blocks are described by DT nodes, placed similarly to other SoC
-blocks. External devices are represented as child nodes of their respective
-bus controller nodes, e.g. I2C.
-
-Data interfaces on all video devices are described by their child 'port' nodes.
-Configuration of a port depends on other devices participating in the data
-transfer and is described by 'endpoint' subnodes.
-
-device {
- ...
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- ...
- endpoint@0 { ... };
- endpoint@1 { ... };
- };
- port@1 { ... };
- };
-};
-
-If a port can be configured to work with more than one remote device on the same
-bus, an 'endpoint' child node must be provided for each of them. If more than
-one port is present in a device node or there is more than one endpoint at a
-port, or port node needs to be associated with a selected hardware interface,
-a common scheme using '#address-cells', '#size-cells' and 'reg' properties is
-used.
-
-All 'port' nodes can be grouped under optional 'ports' node, which allows to
-specify #address-cells, #size-cells properties independently for the 'port'
-and 'endpoint' nodes and any child device nodes a device might have.
-
-Two 'endpoint' nodes are linked with each other through their 'remote-endpoint'
-phandles. An endpoint subnode of a device contains all properties needed for
-configuration of this device for data exchange with other device. In most
-cases properties at the peer 'endpoint' nodes will be identical, however they
-might need to be different when there is any signal modifications on the bus
-between two devices, e.g. there are logic signal inverters on the lines.
-
-It is allowed for multiple endpoints at a port to be active simultaneously,
-where supported by a device. For example, in case where a data interface of
-a device is partitioned into multiple data busses, e.g. 16-bit input port
-divided into two separate ITU-R BT.656 8-bit busses. In such case bus-width
-and data-shift properties can be used to assign physical data lines to each
-endpoint node (logical bus).
-
-Documenting bindings for devices
---------------------------------
-
-All required and optional bindings the device supports shall be explicitly
-documented in device DT binding documentation. This also includes port and
-endpoint nodes for the device, including unit-addresses and reg properties where
-relevant.
-
-Please also see Documentation/devicetree/bindings/graph.txt .
-
-Required properties
--------------------
-
-If there is more than one 'port' or more than one 'endpoint' node or 'reg'
-property is present in port and/or endpoint nodes the following properties
-are required in a relevant parent node:
-
- - #address-cells : number of cells required to define port/endpoint
- identifier, should be 1.
- - #size-cells : should be zero.
-
-
-Optional properties
--------------------
-
-- flash-leds: An array of phandles, each referring to a flash LED, a sub-node
- of the LED driver device node.
-
-- lens-focus: A phandle to the node of the focus lens controller.
-
-- rotation: The camera rotation is expressed as the angular difference in
- degrees between two reference systems, one relative to the camera module, and
- one defined on the external world scene to be captured when projected on the
- image sensor pixel array.
-
- A camera sensor has a 2-dimensional reference system 'Rc' defined by
- its pixel array read-out order. The origin is set to the first pixel
- being read out, the X-axis points along the column read-out direction
- towards the last columns, and the Y-axis along the row read-out
- direction towards the last row.
-
- A typical example for a sensor with a 2592x1944 pixel array matrix
- observed from the front is:
-
- 2591 X-axis 0
- <------------------------+ 0
- .......... ... ..........!
- .......... ... ..........! Y-axis
- ... !
- .......... ... ..........!
- .......... ... ..........! 1943
- V
-
- The external world scene reference system 'Rs' is a 2-dimensional
- reference system on the focal plane of the camera module. The origin is
- placed on the top-left corner of the visible scene, the X-axis points
- towards the right, and the Y-axis points towards the bottom of the
- scene. The top, bottom, left and right directions are intentionally not
- defined and depend on the environment in which the camera is used.
-
- A typical example of a (very common) picture of a shark swimming from
- left to right, as seen from the camera, is:
-
- 0 X-axis
- 0 +------------------------------------->
- !
- !
- !
- ! |\____)\___
- ! ) _____ __`<
- ! |/ )/
- !
- !
- !
- V
- Y-axis
-
- with the reference system 'Rs' placed on the camera focal plane:
-
- ¸.·˙!
- ¸.·˙ !
- _ ¸.·˙ !
- +-/ \-+¸.·˙ !
- | (o) | ! Camera focal plane
- +-----+˙·.¸ !
- ˙·.¸ !
- ˙·.¸ !
- ˙·.¸!
-
- When projected on the sensor's pixel array, the image and the associated
- reference system 'Rs' are typically (but not always) inverted, due to
- the camera module's lens optical inversion effect.
-
- Assuming the above represented scene of the swimming shark, the lens
- inversion projects the scene and its reference system onto the sensor
- pixel array, seen from the front of the camera sensor, as follows:
-
- Y-axis
- ^
- !
- !
- !
- ! |\_____)\__
- ! ) ____ ___.<
- ! |/ )/
- !
- !
- !
- 0 +------------------------------------->
- 0 X-axis
-
- Note the shark being upside-down.
-
- The resulting projected reference system is named 'Rp'.
-
- The camera rotation property is then defined as the angular difference
- in the counter-clockwise direction between the camera reference system
- 'Rc' and the projected scene reference system 'Rp'. It is expressed in
- degrees as a number in the range [0, 360[.
-
- Examples
-
- 0 degrees camera rotation:
-
-
- Y-Rp
- ^
- Y-Rc !
- ^ !
- ! !
- ! !
- ! !
- ! !
- ! !
- ! !
- ! !
- ! 0 +------------------------------------->
- ! 0 X-Rp
- 0 +------------------------------------->
- 0 X-Rc
-
-
- X-Rc 0
- <------------------------------------+ 0
- X-Rp 0 !
- <------------------------------------+ 0 !
- ! !
- ! !
- ! !
- ! !
- ! !
- ! !
- ! !
- ! V
- ! Y-Rc
- V
- Y-Rp
-
- 90 degrees camera rotation:
-
- 0 Y-Rc
- 0 +-------------------->
- ! Y-Rp
- ! ^
- ! !
- ! !
- ! !
- ! !
- ! !
- ! !
- ! !
- ! !
- ! !
- ! 0 +------------------------------------->
- ! 0 X-Rp
- !
- !
- !
- !
- V
- X-Rc
-
- 180 degrees camera rotation:
-
- 0
- <------------------------------------+ 0
- X-Rc !
- Y-Rp !
- ^ !
- ! !
- ! !
- ! !
- ! !
- ! !
- ! !
- ! V
- ! Y-Rc
- 0 +------------------------------------->
- 0 X-Rp
-
- 270 degrees camera rotation:
-
- 0 Y-Rc
- 0 +-------------------->
- ! 0
- ! <-----------------------------------+ 0
- ! X-Rp !
- ! !
- ! !
- ! !
- ! !
- ! !
- ! !
- ! !
- ! !
- ! V
- ! Y-Rp
- !
- !
- !
- !
- V
- X-Rc
-
-
- Example one - Webcam
-
- A camera module installed on the user facing part of a laptop screen
- casing used for video calls. The captured images are meant to be
- displayed in landscape mode (width > height) on the laptop screen.
-
- The camera is typically mounted upside-down to compensate the lens
- optical inversion effect:
-
- Y-Rp
- Y-Rc ^
- ^ !
- ! !
- ! ! |\_____)\__
- ! ! ) ____ ___.<
- ! ! |/ )/
- ! !
- ! !
- ! !
- ! 0 +------------------------------------->
- ! 0 X-Rp
- 0 +------------------------------------->
- 0 X-Rc
-
- The two reference systems are aligned, the resulting camera rotation is
- 0 degrees, no rotation correction needs to be applied to the resulting
- image once captured to memory buffers to correctly display it to users:
-
- +--------------------------------------+
- ! !
- ! !
- ! !
- ! |\____)\___ !
- ! ) _____ __`< !
- ! |/ )/ !
- ! !
- ! !
- ! !
- +--------------------------------------+
-
- If the camera sensor is not mounted upside-down to compensate for the
- lens optical inversion, the two reference systems will not be aligned,
- with 'Rp' being rotated 180 degrees relatively to 'Rc':
-
-
- X-Rc 0
- <------------------------------------+ 0
- !
- Y-Rp !
- ^ !
- ! !
- ! |\_____)\__ !
- ! ) ____ ___.< !
- ! |/ )/ !
- ! !
- ! !
- ! V
- ! Y-Rc
- 0 +------------------------------------->
- 0 X-Rp
-
- The image once captured to memory will then be rotated by 180 degrees:
-
- +--------------------------------------+
- ! !
- ! !
- ! !
- ! __/(_____/| !
- ! >.___ ____ ( !
- ! \( \| !
- ! !
- ! !
- ! !
- +--------------------------------------+
-
- A software rotation correction of 180 degrees should be applied to
- correctly display the image:
-
- +--------------------------------------+
- ! !
- ! !
- ! !
- ! |\____)\___ !
- ! ) _____ __`< !
- ! |/ )/ !
- ! !
- ! !
- ! !
- +--------------------------------------+
-
- Example two - Phone camera
-
- A camera installed on the back side of a mobile device facing away from
- the user. The captured images are meant to be displayed in portrait mode
- (height > width) to match the device screen orientation and the device
- usage orientation used when taking the picture.
-
- The camera sensor is typically mounted with its pixel array longer side
- aligned to the device longer side, upside-down mounted to compensate for
- the lens optical inversion effect:
-
- 0 Y-Rc
- 0 +-------------------->
- ! Y-Rp
- ! ^
- ! !
- ! !
- ! !
- ! ! |\_____)\__
- ! ! ) ____ ___.<
- ! ! |/ )/
- ! !
- ! !
- ! !
- ! 0 +------------------------------------->
- ! 0 X-Rp
- !
- !
- !
- !
- V
- X-Rc
-
- The two reference systems are not aligned and the 'Rp' reference
- system is rotated by 90 degrees in the counter-clockwise direction
- relatively to the 'Rc' reference system.
-
- The image once captured to memory will be rotated:
-
- +-------------------------------------+
- | _ _ |
- | \ / |
- | | | |
- | | | |
- | | > |
- | < | |
- | | | |
- | . |
- | V |
- +-------------------------------------+
-
- A correction of 90 degrees in counter-clockwise direction has to be
- applied to correctly display the image in portrait mode on the device
- screen:
-
- +--------------------+
- | |
- | |
- | |
- | |
- | |
- | |
- | |\____)\___ |
- | ) _____ __`< |
- | |/ )/ |
- | |
- | |
- | |
- | |
- | |
- +--------------------+
-
-- orientation: The orientation of a device (typically an image sensor or a flash
- LED) describing its mounting position relative to the usage orientation of the
- system where the device is installed on.
- Possible values are:
- 0 - Front. The device is mounted on the front facing side of the system.
- For mobile devices such as smartphones, tablets and laptops the front side is
- the user facing side.
- 1 - Back. The device is mounted on the back side of the system, which is
- defined as the opposite side of the front facing one.
- 2 - External. The device is not attached directly to the system but is
- attached in a way that allows it to move freely.
-
-Optional endpoint properties
-----------------------------
-
-- remote-endpoint: phandle to an 'endpoint' subnode of a remote device node.
-- slave-mode: a boolean property indicating that the link is run in slave mode.
- The default when this property is not specified is master mode. In the slave
- mode horizontal and vertical synchronization signals are provided to the
- slave device (data source) by the master device (data sink). In the master
- mode the data source device is also the source of the synchronization signals.
-- bus-type: data bus type. Possible values are:
- 1 - MIPI CSI-2 C-PHY
- 2 - MIPI CSI1
- 3 - CCP2
- 4 - MIPI CSI-2 D-PHY
- 5 - Parallel
- 6 - Bt.656
-- bus-width: number of data lines actively used, valid for the parallel busses.
-- data-shift: on the parallel data busses, if bus-width is used to specify the
- number of data lines, data-shift can be used to specify which data lines are
- used, e.g. "bus-width=<8>; data-shift=<2>;" means, that lines 9:2 are used.
-- hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
-- vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively.
- Note, that if HSYNC and VSYNC polarities are not specified, embedded
- synchronization may be required, where supported.
-- data-active: similar to HSYNC and VSYNC, specifies data line polarity.
-- data-enable-active: similar to HSYNC and VSYNC, specifies the data enable
- signal polarity.
-- field-even-active: field signal level during the even field data transmission.
-- pclk-sample: sample data on rising (1) or falling (0) edge of the pixel clock
- signal.
-- sync-on-green-active: active state of Sync-on-green (SoG) signal, 0/1 for
- LOW/HIGH respectively.
-- data-lanes: an array of physical data lane indexes. Position of an entry
- determines the logical lane number, while the value of an entry indicates
- physical lane, e.g. for 2-lane MIPI CSI-2 bus we could have
- "data-lanes = <1 2>;", assuming the clock lane is on hardware lane 0.
- If the hardware does not support lane reordering, monotonically
- incremented values shall be used from 0 or 1 onwards, depending on
- whether or not there is also a clock lane. This property is valid for
- serial busses only (e.g. MIPI CSI-2).
-- clock-lanes: an array of physical clock lane indexes. Position of an entry
- determines the logical lane number, while the value of an entry indicates
- physical lane, e.g. for a MIPI CSI-2 bus we could have "clock-lanes = <0>;",
- which places the clock lane on hardware lane 0. This property is valid for
- serial busses only (e.g. MIPI CSI-2). Note that for the MIPI CSI-2 bus this
- array contains only one entry.
-- clock-noncontinuous: a boolean property to allow MIPI CSI-2 non-continuous
- clock mode.
-- link-frequencies: Allowed data bus frequencies. For MIPI CSI-2, for
- instance, this is the actual frequency of the bus, not bits per clock per
- lane value. An array of 64-bit unsigned integers.
-- lane-polarities: an array of polarities of the lanes starting from the clock
- lane and followed by the data lanes in the same order as in data-lanes.
- Valid values are 0 (normal) and 1 (inverted). The length of the array
- should be the combined length of data-lanes and clock-lanes properties.
- If the lane-polarities property is omitted, the value must be interpreted
- as 0 (normal). This property is valid for serial busses only.
-- strobe: Whether the clock signal is used as clock (0) or strobe (1). Used
- with CCP2, for instance.
-
-Example
--------
-
-The example snippet below describes two data pipelines. ov772x and imx074 are
-camera sensors with a parallel and serial (MIPI CSI-2) video bus respectively.
-Both sensors are on the I2C control bus corresponding to the i2c0 controller
-node. ov772x sensor is linked directly to the ceu0 video host interface.
-imx074 is linked to ceu0 through the MIPI CSI-2 receiver (csi2). ceu0 has a
-(single) DMA engine writing captured data to memory. ceu0 node has a single
-'port' node which may indicate that at any time only one of the following data
-pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
-
- ceu0: ceu@fe910000 {
- compatible = "renesas,sh-mobile-ceu";
- reg = <0xfe910000 0xa0>;
- interrupts = <0x880>;
-
- mclk: master_clock {
- compatible = "renesas,ceu-clock";
- #clock-cells = <1>;
- clock-frequency = <50000000>; /* Max clock frequency */
- clock-output-names = "mclk";
- };
-
- port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* Parallel bus endpoint */
- ceu0_1: endpoint@1 {
- reg = <1>; /* Local endpoint # */
- remote = <&ov772x_1_1>; /* Remote phandle */
- bus-width = <8>; /* Used data lines */
- data-shift = <2>; /* Lines 9:2 are used */
-
- /* If hsync-active/vsync-active are missing,
- embedded BT.656 sync is used */
- hsync-active = <0>; /* Active low */
- vsync-active = <0>; /* Active low */
- data-active = <1>; /* Active high */
- pclk-sample = <1>; /* Rising */
- };
-
- /* MIPI CSI-2 bus endpoint */
- ceu0_0: endpoint@0 {
- reg = <0>;
- remote = <&csi2_2>;
- };
- };
- };
-
- i2c0: i2c@fff20000 {
- ...
- ov772x_1: camera@21 {
- compatible = "ovti,ov772x";
- reg = <0x21>;
- vddio-supply = <®ulator1>;
- vddcore-supply = <®ulator2>;
-
- clock-frequency = <20000000>;
- clocks = <&mclk 0>;
- clock-names = "xclk";
-
- port {
- /* With 1 endpoint per port no need for addresses. */
- ov772x_1_1: endpoint {
- bus-width = <8>;
- remote-endpoint = <&ceu0_1>;
- hsync-active = <1>;
- vsync-active = <0>; /* Who came up with an
- inverter here ?... */
- data-active = <1>;
- pclk-sample = <1>;
- };
- };
- };
-
- imx074: camera@1a {
- compatible = "sony,imx074";
- reg = <0x1a>;
- vddio-supply = <®ulator1>;
- vddcore-supply = <®ulator2>;
-
- clock-frequency = <30000000>; /* Shared clock with ov772x_1 */
- clocks = <&mclk 0>;
- clock-names = "sysclk"; /* Assuming this is the
- name in the datasheet */
- port {
- imx074_1: endpoint {
- clock-lanes = <0>;
- data-lanes = <1 2>;
- remote-endpoint = <&csi2_1>;
- };
- };
- };
- };
-
- csi2: csi2@ffc90000 {
- compatible = "renesas,sh-mobile-csi2";
- reg = <0xffc90000 0x1000>;
- interrupts = <0x17a0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@1 {
- compatible = "renesas,csi2c"; /* One of CSI2I and CSI2C. */
- reg = <1>; /* CSI-2 PHY #1 of 2: PHY_S,
- PHY_M has port address 0,
- is unused. */
- csi2_1: endpoint {
- clock-lanes = <0>;
- data-lanes = <2 1>;
- remote-endpoint = <&imx074_1>;
- };
- };
- port@2 {
- reg = <2>; /* port 2: link to the CEU */
-
- csi2_2: endpoint {
- remote-endpoint = <&ceu0_0>;
- };
- };
- };
+This file has moved to video-interfaces.yaml and video-interface-devices.yaml.
diff --git a/Documentation/devicetree/bindings/media/video-interfaces.yaml b/Documentation/devicetree/bindings/media/video-interfaces.yaml
new file mode 100644
index 000000000000..7415a4df1576
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/video-interfaces.yaml
@@ -0,0 +1,344 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/video-interfaces.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common bindings for video receiver and transmitter interface endpoints
+
+maintainers:
+ - Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ - Sakari Ailus <sakari.ailus@linux.intel.com>
+
+description: |
+ Video data pipelines usually consist of external devices, e.g. camera sensors,
+ controlled over an I2C, SPI or UART bus, and SoC internal IP blocks, including
+ video DMA engines and video data processors.
+
+ SoC internal blocks are described by DT nodes, placed similarly to other SoC
+ blocks. External devices are represented as child nodes of their respective
+ bus controller nodes, e.g. I2C.
+
+ Data interfaces on all video devices are described by their child 'port' nodes.
+ Configuration of a port depends on other devices participating in the data
+ transfer and is described by 'endpoint' subnodes.
+
+ device {
+ ...
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ ...
+ endpoint@0 { ... };
+ endpoint@1 { ... };
+ };
+ port@1 { ... };
+ };
+ };
+
+ If a port can be configured to work with more than one remote device on the same
+ bus, an 'endpoint' child node must be provided for each of them. If more than
+ one port is present in a device node or there is more than one endpoint at a
+ port, or port node needs to be associated with a selected hardware interface,
+ a common scheme using '#address-cells', '#size-cells' and 'reg' properties is
+ used.
+
+ All 'port' nodes can be grouped under optional 'ports' node, which allows to
+ specify #address-cells, #size-cells properties independently for the 'port'
+ and 'endpoint' nodes and any child device nodes a device might have.
+
+ Two 'endpoint' nodes are linked with each other through their 'remote-endpoint'
+ phandles. An endpoint subnode of a device contains all properties needed for
+ configuration of this device for data exchange with other device. In most
+ cases properties at the peer 'endpoint' nodes will be identical, however they
+ might need to be different when there is any signal modifications on the bus
+ between two devices, e.g. there are logic signal inverters on the lines.
+
+ It is allowed for multiple endpoints at a port to be active simultaneously,
+ where supported by a device. For example, in case where a data interface of
+ a device is partitioned into multiple data busses, e.g. 16-bit input port
+ divided into two separate ITU-R BT.656 8-bit busses. In such case bus-width
+ and data-shift properties can be used to assign physical data lines to each
+ endpoint node (logical bus).
+
+ Documenting bindings for devices
+ --------------------------------
+
+ All required and optional bindings the device supports shall be explicitly
+ documented in device DT binding documentation. This also includes port and
+ endpoint nodes for the device, including unit-addresses and reg properties
+ where relevant.
+
+ Please also see Documentation/devicetree/bindings/graph.txt .
+
+allOf:
+ - $ref: /schemas/graph.yaml#/$defs/endpoint-base
+
+properties:
+ slave-mode:
+ type: boolean
+ description:
+ Indicates that the link is run in slave mode. The default when this
+ property is not specified is master mode. In the slave mode horizontal and
+ vertical synchronization signals are provided to the slave device (data
+ source) by the master device (data sink). In the master mode the data
+ source device is also the source of the synchronization signals.
+
+ bus-type:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 1 # MIPI CSI-2 C-PHY
+ - 2 # MIPI CSI1
+ - 3 # CCP2
+ - 4 # MIPI CSI-2 D-PHY
+ - 5 # Parallel
+ - 6 # Bt.656
+ description:
+ Data bus type.
+
+ bus-width:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 64
+ description:
+ Number of data lines actively used, valid for the parallel busses.
+
+ data-shift:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 64
+ description:
+ On the parallel data busses, if bus-width is used to specify the number of
+ data lines, data-shift can be used to specify which data lines are used,
+ e.g. "bus-width=<8>; data-shift=<2>;" means, that lines 9:2 are used.
+
+ hsync-active:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1 ]
+ description:
+ Active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
+
+ vsync-active:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1 ]
+ description:
+ Active state of the VSYNC signal, 0/1 for LOW/HIGH respectively. Note,
+ that if HSYNC and VSYNC polarities are not specified, embedded
+ synchronization may be required, where supported.
+
+ data-active:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1 ]
+ description:
+ Similar to HSYNC and VSYNC, specifies data line polarity.
+
+ data-enable-active:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1 ]
+ description:
+ Similar to HSYNC and VSYNC, specifies the data enable signal polarity.
+
+ field-even-active:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1 ]
+ description:
+ Field signal level during the even field data transmission.
+
+ pclk-sample:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1 ]
+ description:
+ Sample data on rising (1) or falling (0) edge of the pixel clock signal.
+
+ sync-on-green-active:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1 ]
+ description:
+ Active state of Sync-on-green (SoG) signal, 0/1 for LOW/HIGH respectively.
+
+ data-lanes:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 4
+ items:
+ # Assume up to 4 data and 1 clock lane
+ maximum: 4
+ description:
+ An array of physical data lane indexes. Position of an entry determines
+ the logical lane number, while the value of an entry indicates physical
+ lane, e.g. for 2-lane MIPI CSI-2 bus we could have "data-lanes = <1 2>;",
+ assuming the clock lane is on hardware lane 0. If the hardware does not
+ support lane reordering, monotonically incremented values shall be used
+ from 0 or 1 onwards, depending on whether or not there is also a clock
+ lane. This property is valid for serial busses only (e.g. MIPI CSI-2).
+
+ clock-lanes:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ # Assume up to 4 data and 1 clock lane
+ maximum: 4
+ description:
+ Physical clock lane index. Position of an entry determines
+ the logical lane number, while the value of an entry indicates physical
+ lane, e.g. for a MIPI CSI-2 bus we could have "clock-lanes = <0>;", which
+ places the clock lane on hardware lane 0. This property is valid for
+ serial busses only (e.g. MIPI CSI-2).
+
+ clock-noncontinuous:
+ type: boolean
+ description:
+ Allow MIPI CSI-2 non-continuous clock mode.
+
+ link-frequencies:
+ $ref: /schemas/types.yaml#/definitions/uint64-array
+ description:
+ Allowed data bus frequencies. For MIPI CSI-2, for instance, this is the
+ actual frequency of the bus, not bits per clock per lane value. An array
+ of 64-bit unsigned integers.
+
+ lane-polarities:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ enum: [ 0, 1 ]
+ description:
+ An array of polarities of the lanes starting from the clock lane and
+ followed by the data lanes in the same order as in data-lanes. Valid
+ values are 0 (normal) and 1 (inverted). The length of the array should be
+ the combined length of data-lanes and clock-lanes properties. If the
+ lane-polarities property is omitted, the value must be interpreted as 0
+ (normal). This property is valid for serial busses only.
+
+ strobe:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1 ]
+ description:
+ Whether the clock signal is used as clock (0) or strobe (1). Used with
+ CCP2, for instance.
+
+additionalProperties: true
+
+examples:
+ # The example snippet below describes two data pipelines. ov772x and imx074
+ # are camera sensors with a parallel and serial (MIPI CSI-2) video bus
+ # respectively. Both sensors are on the I2C control bus corresponding to the
+ # i2c0 controller node. ov772x sensor is linked directly to the ceu0 video
+ # host interface. imx074 is linked to ceu0 through the MIPI CSI-2 receiver
+ # (csi2). ceu0 has a (single) DMA engine writing captured data to memory.
+ # ceu0 node has a single 'port' node which may indicate that at any time
+ # only one of the following data pipelines can be active:
+ # ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
+ - |
+ ceu@fe910000 {
+ compatible = "renesas,sh-mobile-ceu";
+ reg = <0xfe910000 0xa0>;
+ interrupts = <0x880>;
+
+ mclk: master_clock {
+ compatible = "renesas,ceu-clock";
+ #clock-cells = <1>;
+ clock-frequency = <50000000>; /* Max clock frequency */
+ clock-output-names = "mclk";
+ };
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Parallel bus endpoint */
+ ceu0_1: endpoint@1 {
+ reg = <1>; /* Local endpoint # */
+ remote-endpoint = <&ov772x_1_1>; /* Remote phandle */
+ bus-width = <8>; /* Used data lines */
+ data-shift = <2>; /* Lines 9:2 are used */
+
+ /* If hsync-active/vsync-active are missing,
+ embedded BT.656 sync is used */
+ hsync-active = <0>; /* Active low */
+ vsync-active = <0>; /* Active low */
+ data-active = <1>; /* Active high */
+ pclk-sample = <1>; /* Rising */
+ };
+
+ /* MIPI CSI-2 bus endpoint */
+ ceu0_0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&csi2_2>;
+ };
+ };
+ };
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera@21 {
+ compatible = "ovti,ov772x";
+ reg = <0x21>;
+ vddio-supply = <®ulator1>;
+ vddcore-supply = <®ulator2>;
+
+ clock-frequency = <20000000>;
+ clocks = <&mclk 0>;
+ clock-names = "xclk";
+
+ port {
+ /* With 1 endpoint per port no need for addresses. */
+ ov772x_1_1: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&ceu0_1>;
+ hsync-active = <1>;
+ vsync-active = <0>; /* Who came up with an
+ inverter here ?... */
+ data-active = <1>;
+ pclk-sample = <1>;
+ };
+ };
+ };
+
+ camera@1a {
+ compatible = "sony,imx074";
+ reg = <0x1a>;
+ vddio-supply = <®ulator1>;
+ vddcore-supply = <®ulator2>;
+
+ clock-frequency = <30000000>; /* Shared clock with ov772x_1 */
+ clocks = <&mclk 0>;
+ clock-names = "sysclk"; /* Assuming this is the
+ name in the datasheet */
+ port {
+ imx074_1: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&csi2_1>;
+ };
+ };
+ };
+ };
+
+ csi2: csi2@ffc90000 {
+ compatible = "renesas,sh-mobile-csi2";
+ reg = <0xffc90000 0x1000>;
+ interrupts = <0x17a0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ compatible = "renesas,csi2c"; /* One of CSI2I and CSI2C. */
+ reg = <1>; /* CSI-2 PHY #1 of 2: PHY_S,
+ PHY_M has port address 0,
+ is unused. */
+ csi2_1: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <2 1>;
+ remote-endpoint = <&imx074_1>;
+ };
+ };
+ port@2 {
+ reg = <2>; /* port 2: link to the CEU */
+
+ csi2_2: endpoint {
+ remote-endpoint = <&ceu0_0>;
+ };
+ };
+ };
+
+...
--
2.25.1
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v2 2/2] dt-bindings: media: Use graph and video-interfaces schemas
2020-12-10 21:16 [PATCH v2 0/2] dt-bindings: media: Convert video-interfaces.txt to schemas Rob Herring
2020-12-10 21:16 ` [PATCH v2 1/2] media: dt-bindings: Convert video-interfaces.txt properties " Rob Herring
@ 2020-12-10 21:16 ` Rob Herring
2020-12-10 21:16 ` [PATCH v3 0/2] dt-bindings: media: Convert video-interfaces.txt to schemas Rob Herring
` (3 subsequent siblings)
5 siblings, 0 replies; 21+ messages in thread
From: Rob Herring @ 2020-12-10 21:16 UTC (permalink / raw)
To: Guennadi Liakhovetski, Sakari Ailus, Maxime Ripard,
Mauro Carvalho Chehab, Jacopo Mondi, Laurent Pinchart
Cc: devicetree, linux-kernel, linux-media
Now that we have graph and video-interfaces schemas, rework the media
related schemas to use them.
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Jacopo Mondi <jacopo@jmondi.org>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: linux-media@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
v2:
- Update based on graph schema changes and addition of video-interfaces
schemas
.../media/allwinner,sun4i-a10-csi.yaml | 11 +-
.../media/allwinner,sun6i-a31-csi.yaml | 12 +-
.../bindings/media/i2c/adv7180.yaml | 35 ++----
.../bindings/media/i2c/adv7604.yaml | 37 ++----
.../bindings/media/i2c/aptina,mt9v111.yaml | 4 +-
.../bindings/media/i2c/imi,rdacm2x-gmsl.yaml | 30 +----
.../devicetree/bindings/media/i2c/imx219.yaml | 21 ++--
.../bindings/media/i2c/maxim,max9286.yaml | 101 ++++------------
.../devicetree/bindings/media/i2c/ov5647.yaml | 20 +---
.../devicetree/bindings/media/i2c/ov8856.yaml | 21 +---
.../bindings/media/i2c/ovti,ov2680.yaml | 6 +-
.../bindings/media/i2c/ovti,ov772x.yaml | 9 +-
.../bindings/media/i2c/sony,imx214.yaml | 25 ++--
.../bindings/media/i2c/sony,imx274.yaml | 3 +-
.../bindings/media/marvell,mmp2-ccic.yaml | 15 +--
.../bindings/media/nxp,imx7-csi.yaml | 5 +-
.../bindings/media/nxp,imx7-mipi-csi2.yaml | 32 +----
.../bindings/media/renesas,ceu.yaml | 17 +--
.../bindings/media/renesas,csi2.yaml | 54 ++-------
.../bindings/media/renesas,vin.yaml | 113 +++---------------
.../bindings/media/rockchip-isp1.yaml | 40 +------
.../bindings/media/st,stm32-dcmi.yaml | 18 +--
.../devicetree/bindings/media/ti,cal.yaml | 55 ++-------
.../bindings/media/xilinx/xlnx,csi2rxss.yaml | 39 +-----
24 files changed, 151 insertions(+), 572 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
index 09318830db47..6ced94064215 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
@@ -67,14 +67,14 @@ properties:
interconnect-names:
const: dma-mem
- # See ./video-interfaces.txt for details
port:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/port-base
additionalProperties: false
properties:
endpoint:
- type: object
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
bus-width:
@@ -83,7 +83,6 @@ properties:
data-active: true
hsync-active: true
pclk-sample: true
- remote-endpoint: true
vsync-active: true
required:
@@ -91,12 +90,8 @@ properties:
- data-active
- hsync-active
- pclk-sample
- - remote-endpoint
- vsync-active
- required:
- - endpoint
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
index 1fd9b5532a21..8b568072a069 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
@@ -40,17 +40,15 @@ properties:
resets:
maxItems: 1
- # See ./video-interfaces.txt for details
port:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/port-base
properties:
endpoint:
- type: object
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
- remote-endpoint: true
-
bus-width:
enum: [ 8, 10, 12, 16 ]
@@ -60,10 +58,6 @@ properties:
required:
- bus-width
- - remote-endpoint
-
- required:
- - endpoint
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/media/i2c/adv7180.yaml b/Documentation/devicetree/bindings/media/i2c/adv7180.yaml
index d8c54f9d9506..b729de679eb8 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv7180.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/adv7180.yaml
@@ -36,17 +36,9 @@ properties:
maxItems: 1
port:
- type: object
- description:
- A node containing a single endpoint as doucmented in
- Documentation/devicetree/bindings/media/video-interfaces.txt
-
- ports:
- type: object
- description:
- A node containing input and output port nodes with endpoint definitions
- as documented in
- Documentation/devicetree/bindings/media/video-interfaces.txt
+ $ref: /schemas/graph.yaml#/properties/port
+
+ ports: true
additionalProperties: false
@@ -80,25 +72,20 @@ allOf:
then:
properties:
ports:
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- '#address-cells':
- const: 1
- '#size-cells':
- const: 0
port@3:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: Output port
patternProperties:
"^port@[0-2]$":
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: Input port
required:
- port@3
- additionalProperties: false
-
required:
- ports
@@ -110,25 +97,21 @@ allOf:
then:
properties:
ports:
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- '#address-cells':
- const: 1
- '#size-cells':
- const: 0
port@6:
type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: Output port
patternProperties:
"^port@[0-5]$":
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: Input port
required:
- port@6
- additionalProperties: false
-
required:
- ports
diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml
index 407baddfaa1d..df634b0c1f8c 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml
@@ -64,16 +64,12 @@ properties:
description:
Select which input is selected after reset.
- ports:
- type: object
- description:
- A node containing input and output port nodes with endpoint definitions
- as documented in
- Documentation/devicetree/bindings/media/video-interfaces.txt
+ ports: true
required:
- compatible
- reg
+ - ports
additionalProperties: false
@@ -86,26 +82,19 @@ allOf:
then:
properties:
ports:
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- '#address-cells':
- const: 1
- '#size-cells':
- const: 0
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: Input port
+
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: Output port
required:
- port@1
- additionalProperties: false
-
- required:
- - ports
-
- if:
properties:
compatible:
@@ -114,28 +103,20 @@ allOf:
then:
properties:
ports:
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- '#address-cells':
- const: 1
- '#size-cells':
- const: 0
port@2:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: Output port
patternProperties:
"^port@[0-1]$":
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: Input port
required:
- port@2
- additionalProperties: false
-
- required:
- - ports
-
examples:
- |
#include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
index ff9546e95d05..e53b8d65f381 100644
--- a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
@@ -41,9 +41,9 @@ properties:
maxItems: 1
port:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: |
- Output video port. See ../video-interfaces.txt.
+ Output video port.
required:
- compatible
diff --git a/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml
index 3dc06c628e64..e57575c44930 100644
--- a/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml
@@ -86,33 +86,9 @@ properties:
maxItems: 3
port:
- type: object
- additionalProperties: false
- description: -|
- Connection to the remote GMSL endpoint are modelled using the OF graph
- bindings in accordance with the video interface bindings defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt.
-
- The device node contains a single "port" child node with a single
- "endpoint" sub-device.
-
- properties:
- endpoint:
- type: object
- additionalProperties: false
-
- properties:
- remote-endpoint:
- description: -|
- phandle to the remote GMSL endpoint sub-node in the remote node
- port.
- maxItems: 1
-
- required:
- - remote-endpoint
-
- required:
- - endpoint
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Connection to the remote GMSL endpoint.
required:
- compatible
diff --git a/Documentation/devicetree/bindings/media/i2c/imx219.yaml b/Documentation/devicetree/bindings/media/i2c/imx219.yaml
index dfc4d29a4f04..012c0565d8ae 100644
--- a/Documentation/devicetree/bindings/media/i2c/imx219.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/imx219.yaml
@@ -44,12 +44,15 @@ properties:
Reference to the GPIO connected to the xclr pin, if any.
Must be released (set high) after all supplies are applied.
- # See ../video-interfaces.txt for more details
port:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
properties:
endpoint:
- type: object
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
properties:
data-lanes:
description: |-
@@ -60,16 +63,8 @@ properties:
- const: 1
- const: 2
- clock-noncontinuous:
- type: boolean
- description: |-
- MIPI CSI-2 clock is non-continuous if this property is present,
- otherwise it's continuous.
-
- link-frequencies:
- $ref: /schemas/types.yaml#/definitions/uint64-array
- description:
- Allowed data bus frequencies.
+ clock-noncontinuous: true
+ link-frequencies: true
required:
- link-frequencies
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
index 9ea827092fdd..3a52dc81eabd 100644
--- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
@@ -52,81 +52,41 @@ properties:
const: 2
ports:
- type: object
- description: |
- The connections to the MAX9286 GMSL and its endpoint nodes are modelled
- using the OF graph bindings in accordance with the video interface
- bindings defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt.
-
- The following table lists the port number corresponding to each device
- port.
-
- Port Description
- ----------------------------------------
- Port 0 GMSL Input 0
- Port 1 GMSL Input 1
- Port 2 GMSL Input 2
- Port 3 GMSL Input 3
- Port 4 CSI-2 Output
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- '#address-cells':
- const: 1
-
- '#size-cells':
- const: 0
-
- port@[0-3]:
- type: object
- properties:
- reg:
- enum: [ 0, 1, 2, 3 ]
-
- endpoint:
- type: object
-
- properties:
- remote-endpoint:
- description: |
- phandle to the remote GMSL source endpoint subnode in the
- remote node port.
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: GMSL Input 0
- required:
- - remote-endpoint
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: GMSL Input 1
- required:
- - reg
- - endpoint
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: GMSL Input 2
- additionalProperties: false
+ port@3:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: GMSL Input 3
port@4:
- type: object
- properties:
- reg:
- const: 4
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: CSI-2 Output
+ properties:
endpoint:
- type: object
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
- remote-endpoint:
- description: phandle to the remote CSI-2 sink endpoint.
-
- data-lanes:
- description: array of physical CSI-2 data lane indexes.
+ data-lanes: true
required:
- - remote-endpoint
- data-lanes
- required:
- - reg
- - endpoint
-
- additionalProperties: false
-
required:
- port@4
@@ -184,25 +144,8 @@ properties:
requirements of the currently connected remote device.
port:
- type: object
-
- properties:
- endpoint:
- type: object
-
- properties:
- remote-endpoint:
- description: phandle to the MAX9286 sink endpoint.
-
- required:
- - remote-endpoint
-
- additionalProperties: false
-
- required:
- - endpoint
-
- additionalProperties: false
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Connection to the MAX9286 sink.
required:
- compatible
diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.yaml b/Documentation/devicetree/bindings/media/i2c/ov5647.yaml
index 280c62afae13..3b1ea9da437a 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov5647.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ov5647.yaml
@@ -31,27 +31,15 @@ properties:
maxItems: 1
port:
- type: object
- description: |-
- Should contain one endpoint sub-node used to model connection to the
- video receiver according to the specification defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt.
+ $ref: /schemas/graph.yaml#/$defs/port-base
properties:
endpoint:
- type: object
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
- remote-endpoint:
- description: |-
- phandle to the video receiver input port.
-
- clock-noncontinuous:
- type: boolean
- description: |-
- Set to true to allow MIPI CSI-2 non-continuous clock operations.
-
- additionalProperties: false
+ clock-noncontinuous: true
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
index cde85553fd01..c29b057ae922 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
@@ -57,16 +57,13 @@ properties:
active low.
port:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/port-base
additionalProperties: false
- description:
- A node containing an output port node with an endpoint definition
- as documented in
- Documentation/devicetree/bindings/media/video-interfaces.txt
properties:
endpoint:
- type: object
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
data-lanes:
@@ -79,18 +76,13 @@ properties:
- const: 4
link-frequencies:
- $ref: /schemas/types.yaml#/definitions/uint64-array
- description:
- Allowed data bus frequencies. 360000000, 180000000 Hz or both
- are supported by the driver.
-
+ maxItems: 2
+ items:
+ enum: [ 360000000, 180000000 ]
required:
- link-frequencies
- required:
- - endpoint
-
required:
- compatible
- reg
@@ -139,4 +131,3 @@ examples:
};
};
...
-
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
index 43bf749807e1..cf456f8d9ddc 100644
--- a/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
@@ -50,11 +50,9 @@ properties:
Definition of the regulator used as digital power supply.
port:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
- A node containing an output port node with an endpoint definition
- as documented in
- Documentation/devicetree/bindings/media/video-interfaces.txt
+ A node containing an output port node.
required:
- compatible
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
index 6866c2cdac50..44529425ce3a 100644
--- a/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
@@ -37,13 +37,14 @@ properties:
maxItems: 1
port:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/port-base
description: |
- Video output port. See ../video-interfaces.txt.
+ Video output port.
properties:
endpoint:
- type: object
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
bus-type:
@@ -91,8 +92,6 @@ properties:
required:
- bus-type
- unevaluatedProperties: false
-
additionalProperties: false
required:
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
index 1a3590dd0e98..1b69b6342978 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
@@ -15,6 +15,9 @@ description: |
interface. Image data is sent through MIPI CSI-2, through 2 or 4 lanes at a
maximum throughput of 1.2Gbps/lane.
+allOf:
+ - $ref: ../video-interface-devices.yaml#
+
properties:
compatible:
const: sony,imx214
@@ -47,25 +50,21 @@ properties:
description: Chip digital core regulator (1.12V).
maxItems: 1
- flash-leds:
- description: See ../video-interfaces.txt
-
- lens-focus:
- description: See ../video-interfaces.txt
+ flash-leds: true
+ lens-focus: true
port:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/port-base
description: |
- Video output port. See ../video-interfaces.txt.
+ Video output port.
properties:
endpoint:
- type: object
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
data-lanes:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- description: See ../video-interfaces.txt
anyOf:
- items:
- const: 1
@@ -76,16 +75,12 @@ properties:
- const: 3
- const: 4
- link-frequencies:
- $ref: /schemas/types.yaml#/definitions/uint64-array
- description: See ../video-interfaces.txt
+ link-frequencies: true
required:
- data-lanes
- link-frequencies
- unevaluatedProperties: false
-
additionalProperties: false
required:
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
index f697e1a20beb..90828020e42a 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
@@ -44,8 +44,7 @@ properties:
maxItems: 1
port:
- type: object
- description: Output video port. See ../video-interfaces.txt.
+ $ref: /schemas/graph.yaml#/properties/port
required:
- compatible
diff --git a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
index 49bff738aca5..9e85c70d1a1f 100644
--- a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
+++ b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
@@ -24,29 +24,20 @@ properties:
maxItems: 1
port:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/port-base
additionalProperties: false
properties:
endpoint:
- type: object
- additionalProperties: false
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
- # Properties described in
- # Documentation/devicetree/bindings/media/video-interfaces.txt
properties:
- remote-endpoint: true
hsync-active: true
vsync-active: true
pclk-sample: true
bus-type: true
- required:
- - remote-endpoint
-
- required:
- - endpoint
-
clocks:
minItems: 1
maxItems: 3
diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
index 4e81a47e60ac..d91575b8ebb9 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
@@ -33,10 +33,7 @@ properties:
- const: mclk
port:
- type: object
- description:
- A node containing input port nodes with endpoint definitions as documented
- in Documentation/devicetree/bindings/media/video-interfaces.txt
+ $ref: /schemas/graph.yaml#/properties/port
required:
- compatible
diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
index 0668332959e7..be47a7b62ca9 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
@@ -58,35 +58,22 @@ properties:
Differential receiver (HS-RX) settle time
ports:
- type: object
- description:
- A node containing input and output port nodes with endpoint definitions
- as documented in
- Documentation/devicetree/bindings/media/video-interfaces.txt
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- '#address-cells':
- const: 1
-
- '#size-cells':
- const: 0
-
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
description:
Input port node, single endpoint describing the CSI-2 transmitter.
properties:
- reg:
- const: 0
-
endpoint:
- type: object
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
data-lanes:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- description: See ../video-interfaces.txt
oneOf:
- items:
- const: 1
@@ -94,18 +81,11 @@ properties:
- const: 1
- const: 2
- remote-endpoint: true
-
required:
- data-lanes
- - remote-endpoint
-
- additionalProperties: false
-
- additionalProperties: false
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
Output port node
diff --git a/Documentation/devicetree/bindings/media/renesas,ceu.yaml b/Documentation/devicetree/bindings/media/renesas,ceu.yaml
index c7e1e4fe67e6..50e0740af15a 100644
--- a/Documentation/devicetree/bindings/media/renesas,ceu.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,ceu.yaml
@@ -34,18 +34,15 @@ properties:
maxItems: 1
port:
- type: object
- additionalProperties: false
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
properties:
endpoint:
- type: object
- additionalProperties: false
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
- # Properties described in
- # Documentation/devicetree/bindings/media/video-interfaces.txt
properties:
- remote-endpoint: true
hsync-active: true
vsync-active: true
field-even-active: false
@@ -53,12 +50,6 @@ properties:
enum: [8, 16]
default: 8
- required:
- - remote-endpoint
-
- required:
- - endpoint
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/media/renesas,csi2.yaml b/Documentation/devicetree/bindings/media/renesas,csi2.yaml
index 533c2f181db7..20396f1be999 100644
--- a/Documentation/devicetree/bindings/media/renesas,csi2.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,csi2.yaml
@@ -46,24 +46,19 @@ properties:
maxItems: 1
ports:
- type: object
- description:
- A node containing input and output port nodes with endpoint definitions
- as documented in
- Documentation/devicetree/bindings/media/video-interfaces.txt
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
description:
Input port node, single endpoint describing the CSI-2 transmitter.
properties:
- reg:
- const: 0
-
endpoint:
- type: object
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
clock-lanes:
@@ -72,50 +67,19 @@ properties:
data-lanes:
maxItems: 1
- remote-endpoint: true
-
required:
- clock-lanes
- data-lanes
- - remote-endpoint
-
- additionalProperties: false
-
- additionalProperties: false
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
Output port node, multiple endpoints describing all the R-Car VIN
modules connected the CSI-2 receiver.
- properties:
- '#address-cells':
- const: 1
-
- '#size-cells':
- const: 0
-
- reg:
- const: 1
-
- patternProperties:
- "^endpoint@[0-9a-f]$":
- type: object
-
- properties:
- reg:
- maxItems: 1
-
- remote-endpoint: true
-
- required:
- - reg
- - remote-endpoint
-
- additionalProperties: false
-
- additionalProperties: false
+ required:
+ - port@0
+ - port@1
required:
- compatible
diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml
index ad2fe660364b..fe7c4cbfe4ba 100644
--- a/Documentation/devicetree/bindings/media/renesas,vin.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml
@@ -69,15 +69,15 @@ properties:
#The per-board settings for Gen2 and RZ/G1 platforms:
port:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
description:
- A node containing a parallel input with a single endpoint definitions as
- documented in
- Documentation/devicetree/bindings/media/video-interfaces.txt
+ A node containing a parallel input
properties:
endpoint:
- type: object
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
hsync-active:
@@ -106,15 +106,6 @@ properties:
data-active: true
- remote-endpoint: true
-
- required:
- - remote-endpoint
-
- additionalProperties: false
-
- additionalProperties: false
-
#The per-board settings for Gen3 and RZ/G2 platforms:
renesas,id:
description: VIN channel number
@@ -123,23 +114,18 @@ properties:
maximum: 15
ports:
- type: object
- description:
- A node containing input nodes with endpoint definitions as documented in
- Documentation/devicetree/bindings/media/video-interfaces.txt
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
Input port node, single endpoint describing a parallel input source.
properties:
- reg:
- const: 0
-
endpoint:
- type: object
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
hsync-active:
@@ -168,98 +154,29 @@ properties:
data-active: true
- remote-endpoint: true
-
- required:
- - remote-endpoint
-
- additionalProperties: false
-
- required:
- - endpoint
-
- additionalProperties: false
-
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
Input port node, multiple endpoints describing all the R-Car CSI-2
modules connected the VIN.
properties:
- '#address-cells':
- const: 1
-
- '#size-cells':
- const: 0
-
- reg:
- const: 1
-
endpoint@0:
- type: object
+ $ref: /schemas/graph.yaml#/properties/endpoint
description: Endpoint connected to CSI20.
- properties:
- reg:
- const: 0
-
- remote-endpoint: true
-
- required:
- - reg
- - remote-endpoint
-
- additionalProperties: false
-
endpoint@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/endpoint
description: Endpoint connected to CSI21.
- properties:
- reg:
- const: 1
-
- remote-endpoint: true
-
- required:
- - reg
- - remote-endpoint
-
- additionalProperties: false
-
endpoint@2:
- type: object
+ $ref: /schemas/graph.yaml#/properties/endpoint
description: Endpoint connected to CSI40.
- properties:
- reg:
- const: 2
-
- remote-endpoint: true
-
- required:
- - reg
- - remote-endpoint
-
- additionalProperties: false
-
endpoint@3:
- type: object
+ $ref: /schemas/graph.yaml#/properties/endpoint
description: Endpoint connected to CSI41.
- properties:
- reg:
- const: 3
-
- remote-endpoint: true
-
- required:
- - reg
- - remote-endpoint
-
- additionalProperties: false
-
anyOf:
- required:
- endpoint@0
@@ -270,8 +187,6 @@ properties:
- required:
- endpoint@3
- additionalProperties: false
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/media/rockchip-isp1.yaml b/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
index 2004c054ed1a..a6b1eff879ed 100644
--- a/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
+++ b/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
@@ -56,56 +56,26 @@ properties:
power-domains:
maxItems: 1
- # See ./video-interfaces.txt for details
ports:
- type: object
- additionalProperties: false
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
-
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
description: connection point for sensors at MIPI-DPHY RX0
- additionalProperties: false
properties:
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
-
- reg:
- const: 0
-
- patternProperties:
endpoint:
- type: object
- additionalProperties: false
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
- reg:
- maxItems: 1
-
data-lanes:
minItems: 1
maxItems: 4
- remote-endpoint: true
-
- required:
- - reg
- - "#address-cells"
- - "#size-cells"
-
required:
- - "#address-cells"
- - "#size-cells"
- port@0
required:
diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
index c18574bb3e81..41e1d0cd80e5 100644
--- a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
+++ b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
@@ -37,16 +37,15 @@ properties:
maxItems: 1
port:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
description:
- DCMI supports a single port node with parallel bus. It should contain
- one 'port' child node with child 'endpoint' node. Please refer to the
- bindings defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt.
+ DCMI supports a single port node with parallel bus.
properties:
endpoint:
- type: object
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
bus-type:
@@ -57,8 +56,6 @@ properties:
enum: [8, 10, 12, 14]
default: 8
- remote-endpoint: true
-
allOf:
- if:
properties:
@@ -73,14 +70,9 @@ properties:
enum: [8]
required:
- - remote-endpoint
- bus-type
- pclk-sample
- unevaluatedProperties: false
-
- additionalProperties: false
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/media/ti,cal.yaml b/Documentation/devicetree/bindings/media/ti,cal.yaml
index 5e066629287d..65177cd69514 100644
--- a/Documentation/devicetree/bindings/media/ti,cal.yaml
+++ b/Documentation/devicetree/bindings/media/ti,cal.yaml
@@ -15,10 +15,7 @@ description: |-
processing capability to connect CSI2 image-sensor modules to the
DRA72x device.
- CAL supports 2 camera port nodes on MIPI bus. Each CSI2 camera port nodes
- should contain a 'port' child node with child 'endpoint' node. Please
- refer to the bindings defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt.
+ CAL supports 2 camera port nodes on MIPI bus.
properties:
compatible:
@@ -67,31 +64,19 @@ properties:
Documentation/devicetree/bindings/power/power_domain.txt
maxItems: 1
- # See ./video-interfaces.txt for details
ports:
- type: object
- additionalProperties: false
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
-
port@0:
- type: object
- additionalProperties: false
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: CSI2 Port #0
properties:
- reg:
- const: 0
- description: CSI2 Port #0
-
- patternProperties:
endpoint:
- type: object
- additionalProperties: false
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
clock-lanes:
@@ -101,24 +86,15 @@ properties:
minItems: 1
maxItems: 4
- remote-endpoint: true
-
- required:
- - reg
-
port@1:
- type: object
- additionalProperties: false
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: CSI2 Port #1
properties:
- reg:
- const: 1
- description: CSI2 Port #1
-
- patternProperties:
endpoint:
- type: object
- additionalProperties: false
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
clock-lanes:
@@ -128,14 +104,7 @@ properties:
minItems: 1
maxItems: 4
- remote-endpoint: true
-
- required:
- - reg
-
required:
- - "#address-cells"
- - "#size-cells"
- port@0
required:
diff --git a/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml
index 2961a5b6872f..7d77823dbb7a 100644
--- a/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml
+++ b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml
@@ -97,24 +97,21 @@ properties:
maxItems: 1
ports:
- type: object
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/port-base
description: |
Input / sink port node, single endpoint describing the
CSI-2 transmitter.
properties:
- reg:
- const: 0
-
endpoint:
- type: object
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
-
data-lanes:
description: |
This is required only in the sink port 0 endpoint which
@@ -130,41 +127,17 @@ properties:
- const: 3
- const: 4
- remote-endpoint: true
-
required:
- data-lanes
- - remote-endpoint
-
- additionalProperties: false
- additionalProperties: false
+ unevaluatedProperties: false
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: |
Output / source port node, endpoint describing modules
connected the CSI-2 receiver.
- properties:
-
- reg:
- const: 1
-
- endpoint:
- type: object
-
- properties:
-
- remote-endpoint: true
-
- required:
- - remote-endpoint
-
- additionalProperties: false
-
- additionalProperties: false
-
required:
- compatible
- reg
--
2.25.1
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v3 0/2] dt-bindings: media: Convert video-interfaces.txt to schemas
2020-12-10 21:16 [PATCH v2 0/2] dt-bindings: media: Convert video-interfaces.txt to schemas Rob Herring
2020-12-10 21:16 ` [PATCH v2 1/2] media: dt-bindings: Convert video-interfaces.txt properties " Rob Herring
2020-12-10 21:16 ` [PATCH v2 2/2] dt-bindings: media: Use graph and video-interfaces schemas Rob Herring
@ 2020-12-10 21:16 ` Rob Herring
2020-12-16 14:22 ` Hans Verkuil
2020-12-10 21:16 ` [PATCH v3 1/2] media: dt-bindings: Convert video-interfaces.txt properties " Rob Herring
` (2 subsequent siblings)
5 siblings, 1 reply; 21+ messages in thread
From: Rob Herring @ 2020-12-10 21:16 UTC (permalink / raw)
To: Guennadi Liakhovetski, Sakari Ailus, Maxime Ripard,
Mauro Carvalho Chehab, Jacopo Mondi, Laurent Pinchart,
Guennadi Liakhovetski
Cc: devicetree, linux-kernel, linux-media
This series converts video-interfaces.txt to DT schema which in turn is
based on converting the graph binding to a schema. All the media users
are converted to use the graph and video-interfaces schemas.
Based on media tree commit 7ea4d2329330. This is dependent on dt-schema
changes not yet committed[1]. Please review those too.
Rob
[1] https://github.com/devicetree-org/dt-schema/tree/of-graph
Rob Herring (2):
media: dt-bindings: Convert video-interfaces.txt properties to schemas
dt-bindings: media: Use graph and video-interfaces schemas
.../media/allwinner,sun4i-a10-csi.yaml | 11 +-
.../media/allwinner,sun6i-a31-csi.yaml | 12 +-
.../bindings/media/i2c/adv7180.yaml | 36 +-
.../bindings/media/i2c/adv7604.yaml | 37 +-
.../bindings/media/i2c/aptina,mt9v111.yaml | 4 +-
.../bindings/media/i2c/imi,rdacm2x-gmsl.yaml | 30 +-
.../devicetree/bindings/media/i2c/imx219.yaml | 21 +-
.../bindings/media/i2c/maxim,max9286.yaml | 101 +--
.../bindings/media/i2c/mipi-ccs.yaml | 15 +-
.../devicetree/bindings/media/i2c/ov5647.yaml | 20 +-
.../devicetree/bindings/media/i2c/ov8856.yaml | 21 +-
.../bindings/media/i2c/ovti,ov02a10.yaml | 30 +-
.../bindings/media/i2c/ovti,ov2680.yaml | 6 +-
.../bindings/media/i2c/ovti,ov772x.yaml | 9 +-
.../bindings/media/i2c/sony,imx214.yaml | 25 +-
.../bindings/media/i2c/sony,imx274.yaml | 3 +-
.../bindings/media/marvell,mmp2-ccic.yaml | 15 +-
.../bindings/media/nxp,imx7-csi.yaml | 5 +-
.../bindings/media/nxp,imx7-mipi-csi2.yaml | 32 +-
.../bindings/media/renesas,ceu.yaml | 17 +-
.../bindings/media/renesas,csi2.yaml | 54 +-
.../bindings/media/renesas,vin.yaml | 113 +---
.../bindings/media/rockchip-isp1.yaml | 40 +-
.../bindings/media/st,stm32-dcmi.yaml | 18 +-
.../devicetree/bindings/media/ti,cal.yaml | 55 +-
.../media/video-interface-devices.yaml | 406 +++++++++++
.../bindings/media/video-interfaces.txt | 640 +-----------------
.../bindings/media/video-interfaces.yaml | 346 ++++++++++
.../bindings/media/xilinx/xlnx,csi2rxss.yaml | 39 +-
29 files changed, 922 insertions(+), 1239 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/video-interface-devices.yaml
create mode 100644 Documentation/devicetree/bindings/media/video-interfaces.yaml
--
2.25.1
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v3 1/2] media: dt-bindings: Convert video-interfaces.txt properties to schemas
2020-12-10 21:16 [PATCH v2 0/2] dt-bindings: media: Convert video-interfaces.txt to schemas Rob Herring
` (2 preceding siblings ...)
2020-12-10 21:16 ` [PATCH v3 0/2] dt-bindings: media: Convert video-interfaces.txt to schemas Rob Herring
@ 2020-12-10 21:16 ` Rob Herring
2020-12-16 14:52 ` Laurent Pinchart
2020-12-10 21:16 ` [PATCH v3 2/2] dt-bindings: media: Use graph and video-interfaces schemas Rob Herring
2020-12-10 22:39 ` [PATCH v2 0/2] dt-bindings: media: Convert video-interfaces.txt to schemas Rob Herring
5 siblings, 1 reply; 21+ messages in thread
From: Rob Herring @ 2020-12-10 21:16 UTC (permalink / raw)
To: Guennadi Liakhovetski, Sakari Ailus, Maxime Ripard,
Mauro Carvalho Chehab, Jacopo Mondi, Laurent Pinchart
Cc: devicetree, linux-kernel, linux-media
Convert video-interfaces.txt to DT schema. As it contains a mixture of
device level and endpoint properties, split it up into 2 schemas.
Binding schemas will need to reference both the graph.yaml and
video-interfaces.yaml schemas. The exact schema depends on how many
ports and endpoints for the binding. A single port with a single
endpoint looks similar to this:
port:
$ref: /schemas/graph.yaml#/$defs/port-base
properties:
endpoint:
$ref: video-interfaces.yaml#
unevaluatedProperties: false
properties:
bus-width:
enum: [ 8, 10, 12, 16 ]
pclk-sample: true
hsync-active: true
vsync-active: true
required:
- bus-width
additionalProperties: false
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Rob Herring <robh@kernel.org>
---
I need acks for dual licensing from the listed maintainers.
v3:
- Support up to 9 physical lanes
- Set lane-polarities array bounds
---
.../media/video-interface-devices.yaml | 406 +++++++++++
.../bindings/media/video-interfaces.txt | 640 +-----------------
.../bindings/media/video-interfaces.yaml | 346 ++++++++++
3 files changed, 753 insertions(+), 639 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/video-interface-devices.yaml
create mode 100644 Documentation/devicetree/bindings/media/video-interfaces.yaml
diff --git a/Documentation/devicetree/bindings/media/video-interface-devices.yaml b/Documentation/devicetree/bindings/media/video-interface-devices.yaml
new file mode 100644
index 000000000000..4527f56a5a6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/video-interface-devices.yaml
@@ -0,0 +1,406 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/video-interface-devices.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common bindings for video receiver and transmitter devices
+
+maintainers:
+ - Jacopo Mondi <jacopo@jmondi.org>
+ - Sakari Ailus <sakari.ailus@linux.intel.com>
+
+properties:
+ flash-leds:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ An array of phandles, each referring to a flash LED, a sub-node of the LED
+ driver device node.
+
+ lens-focus:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ A phandle to the node of the focus lens controller.
+
+ rotation:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 90, 180, 270 ]
+ description: |
+ The camera rotation is expressed as the angular difference in degrees
+ between two reference systems, one relative to the camera module, and one
+ defined on the external world scene to be captured when projected on the
+ image sensor pixel array.
+
+ A camera sensor has a 2-dimensional reference system 'Rc' defined by its
+ pixel array read-out order. The origin is set to the first pixel being
+ read out, the X-axis points along the column read-out direction towards
+ the last columns, and the Y-axis along the row read-out direction towards
+ the last row.
+
+ A typical example for a sensor with a 2592x1944 pixel array matrix
+ observed from the front is:
+
+ 2591 X-axis 0
+ <------------------------+ 0
+ .......... ... ..........!
+ .......... ... ..........! Y-axis
+ ... !
+ .......... ... ..........!
+ .......... ... ..........! 1943
+ V
+
+ The external world scene reference system 'Rs' is a 2-dimensional
+ reference system on the focal plane of the camera module. The origin is
+ placed on the top-left corner of the visible scene, the X-axis points
+ towards the right, and the Y-axis points towards the bottom of the scene.
+ The top, bottom, left and right directions are intentionally not defined
+ and depend on the environment in which the camera is used.
+
+ A typical example of a (very common) picture of a shark swimming from left
+ to right, as seen from the camera, is:
+
+ 0 X-axis
+ 0 +------------------------------------->
+ !
+ !
+ !
+ ! |\____)\___
+ ! ) _____ __`<
+ ! |/ )/
+ !
+ !
+ !
+ V
+ Y-axis
+
+ with the reference system 'Rs' placed on the camera focal plane:
+
+ ¸.·˙!
+ ¸.·˙ !
+ _ ¸.·˙ !
+ +-/ \-+¸.·˙ !
+ | (o) | ! Camera focal plane
+ +-----+˙·.¸ !
+ ˙·.¸ !
+ ˙·.¸ !
+ ˙·.¸!
+
+ When projected on the sensor's pixel array, the image and the associated
+ reference system 'Rs' are typically (but not always) inverted, due to the
+ camera module's lens optical inversion effect.
+
+ Assuming the above represented scene of the swimming shark, the lens
+ inversion projects the scene and its reference system onto the sensor
+ pixel array, seen from the front of the camera sensor, as follows:
+
+ Y-axis
+ ^
+ !
+ !
+ !
+ ! |\_____)\__
+ ! ) ____ ___.<
+ ! |/ )/
+ !
+ !
+ !
+ 0 +------------------------------------->
+ 0 X-axis
+
+ Note the shark being upside-down.
+
+ The resulting projected reference system is named 'Rp'.
+
+ The camera rotation property is then defined as the angular difference in
+ the counter-clockwise direction between the camera reference system 'Rc'
+ and the projected scene reference system 'Rp'. It is expressed in degrees
+ as a number in the range [0, 360[.
+
+ Examples
+
+ 0 degrees camera rotation:
+
+
+ Y-Rp
+ ^
+ Y-Rc !
+ ^ !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! 0 +------------------------------------->
+ ! 0 X-Rp
+ 0 +------------------------------------->
+ 0 X-Rc
+
+
+ X-Rc 0
+ <------------------------------------+ 0
+ X-Rp 0 !
+ <------------------------------------+ 0 !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! V
+ ! Y-Rc
+ V
+ Y-Rp
+
+ 90 degrees camera rotation:
+
+ 0 Y-Rc
+ 0 +-------------------->
+ ! Y-Rp
+ ! ^
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! 0 +------------------------------------->
+ ! 0 X-Rp
+ !
+ !
+ !
+ !
+ V
+ X-Rc
+
+ 180 degrees camera rotation:
+
+ 0
+ <------------------------------------+ 0
+ X-Rc !
+ Y-Rp !
+ ^ !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! V
+ ! Y-Rc
+ 0 +------------------------------------->
+ 0 X-Rp
+
+ 270 degrees camera rotation:
+
+ 0 Y-Rc
+ 0 +-------------------->
+ ! 0
+ ! <-----------------------------------+ 0
+ ! X-Rp !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! !
+ ! V
+ ! Y-Rp
+ !
+ !
+ !
+ !
+ V
+ X-Rc
+
+
+ Example one - Webcam
+
+ A camera module installed on the user facing part of a laptop screen
+ casing used for video calls. The captured images are meant to be displayed
+ in landscape mode (width > height) on the laptop screen.
+
+ The camera is typically mounted upside-down to compensate the lens optical
+ inversion effect:
+
+ Y-Rp
+ Y-Rc ^
+ ^ !
+ ! !
+ ! ! |\_____)\__
+ ! ! ) ____ ___.<
+ ! ! |/ )/
+ ! !
+ ! !
+ ! !
+ ! 0 +------------------------------------->
+ ! 0 X-Rp
+ 0 +------------------------------------->
+ 0 X-Rc
+
+ The two reference systems are aligned, the resulting camera rotation is
+ 0 degrees, no rotation correction needs to be applied to the resulting
+ image once captured to memory buffers to correctly display it to users:
+
+ +--------------------------------------+
+ ! !
+ ! !
+ ! !
+ ! |\____)\___ !
+ ! ) _____ __`< !
+ ! |/ )/ !
+ ! !
+ ! !
+ ! !
+ +--------------------------------------+
+
+ If the camera sensor is not mounted upside-down to compensate for the lens
+ optical inversion, the two reference systems will not be aligned, with
+ 'Rp' being rotated 180 degrees relatively to 'Rc':
+
+
+ X-Rc 0
+ <------------------------------------+ 0
+ !
+ Y-Rp !
+ ^ !
+ ! !
+ ! |\_____)\__ !
+ ! ) ____ ___.< !
+ ! |/ )/ !
+ ! !
+ ! !
+ ! V
+ ! Y-Rc
+ 0 +------------------------------------->
+ 0 X-Rp
+
+ The image once captured to memory will then be rotated by 180 degrees:
+
+ +--------------------------------------+
+ ! !
+ ! !
+ ! !
+ ! __/(_____/| !
+ ! >.___ ____ ( !
+ ! \( \| !
+ ! !
+ ! !
+ ! !
+ +--------------------------------------+
+
+ A software rotation correction of 180 degrees should be applied to
+ correctly display the image:
+
+ +--------------------------------------+
+ ! !
+ ! !
+ ! !
+ ! |\____)\___ !
+ ! ) _____ __`< !
+ ! |/ )/ !
+ ! !
+ ! !
+ ! !
+ +--------------------------------------+
+
+ Example two - Phone camera
+
+ A camera installed on the back side of a mobile device facing away from
+ the user. The captured images are meant to be displayed in portrait mode
+ (height > width) to match the device screen orientation and the device
+ usage orientation used when taking the picture.
+
+ The camera sensor is typically mounted with its pixel array longer side
+ aligned to the device longer side, upside-down mounted to compensate for
+ the lens optical inversion effect:
+
+ 0 Y-Rc
+ 0 +-------------------->
+ ! Y-Rp
+ ! ^
+ ! !
+ ! !
+ ! !
+ ! ! |\_____)\__
+ ! ! ) ____ ___.<
+ ! ! |/ )/
+ ! !
+ ! !
+ ! !
+ ! 0 +------------------------------------->
+ ! 0 X-Rp
+ !
+ !
+ !
+ !
+ V
+ X-Rc
+
+ The two reference systems are not aligned and the 'Rp' reference system is
+ rotated by 90 degrees in the counter-clockwise direction relatively to the
+ 'Rc' reference system.
+
+ The image once captured to memory will be rotated:
+
+ +-------------------------------------+
+ | _ _ |
+ | \ / |
+ | | | |
+ | | | |
+ | | > |
+ | < | |
+ | | | |
+ | . |
+ | V |
+ +-------------------------------------+
+
+ A correction of 90 degrees in counter-clockwise direction has to be
+ applied to correctly display the image in portrait mode on the device
+ screen:
+
+ +--------------------+
+ | |
+ | |
+ | |
+ | |
+ | |
+ | |
+ | |\____)\___ |
+ | ) _____ __`< |
+ | |/ )/ |
+ | |
+ | |
+ | |
+ | |
+ | |
+ +--------------------+
+
+ orientation:
+ description:
+ The orientation of a device (typically an image sensor or a flash LED)
+ describing its mounting position relative to the usage orientation of the
+ system where the device is installed on.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ # Front. The device is mounted on the front facing side of the system. For
+ # mobile devices such as smartphones, tablets and laptops the front side
+ # is the user facing side.
+ - 0
+ # Back. The device is mounted on the back side of the system, which is
+ # defined as the opposite side of the front facing one.
+ - 1
+ # External. The device is not attached directly to the system but is
+ # attached in a way that allows it to move freely.
+ - 2
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt
index 3920f25a9123..8fcf5f52bf5b 100644
--- a/Documentation/devicetree/bindings/media/video-interfaces.txt
+++ b/Documentation/devicetree/bindings/media/video-interfaces.txt
@@ -1,639 +1 @@
-Common bindings for video receiver and transmitter interfaces
-
-General concept
----------------
-
-Video data pipelines usually consist of external devices, e.g. camera sensors,
-controlled over an I2C, SPI or UART bus, and SoC internal IP blocks, including
-video DMA engines and video data processors.
-
-SoC internal blocks are described by DT nodes, placed similarly to other SoC
-blocks. External devices are represented as child nodes of their respective
-bus controller nodes, e.g. I2C.
-
-Data interfaces on all video devices are described by their child 'port' nodes.
-Configuration of a port depends on other devices participating in the data
-transfer and is described by 'endpoint' subnodes.
-
-device {
- ...
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- ...
- endpoint@0 { ... };
- endpoint@1 { ... };
- };
- port@1 { ... };
- };
-};
-
-If a port can be configured to work with more than one remote device on the same
-bus, an 'endpoint' child node must be provided for each of them. If more than
-one port is present in a device node or there is more than one endpoint at a
-port, or port node needs to be associated with a selected hardware interface,
-a common scheme using '#address-cells', '#size-cells' and 'reg' properties is
-used.
-
-All 'port' nodes can be grouped under optional 'ports' node, which allows to
-specify #address-cells, #size-cells properties independently for the 'port'
-and 'endpoint' nodes and any child device nodes a device might have.
-
-Two 'endpoint' nodes are linked with each other through their 'remote-endpoint'
-phandles. An endpoint subnode of a device contains all properties needed for
-configuration of this device for data exchange with other device. In most
-cases properties at the peer 'endpoint' nodes will be identical, however they
-might need to be different when there is any signal modifications on the bus
-between two devices, e.g. there are logic signal inverters on the lines.
-
-It is allowed for multiple endpoints at a port to be active simultaneously,
-where supported by a device. For example, in case where a data interface of
-a device is partitioned into multiple data busses, e.g. 16-bit input port
-divided into two separate ITU-R BT.656 8-bit busses. In such case bus-width
-and data-shift properties can be used to assign physical data lines to each
-endpoint node (logical bus).
-
-Documenting bindings for devices
---------------------------------
-
-All required and optional bindings the device supports shall be explicitly
-documented in device DT binding documentation. This also includes port and
-endpoint nodes for the device, including unit-addresses and reg properties where
-relevant.
-
-Please also see Documentation/devicetree/bindings/graph.txt .
-
-Required properties
--------------------
-
-If there is more than one 'port' or more than one 'endpoint' node or 'reg'
-property is present in port and/or endpoint nodes the following properties
-are required in a relevant parent node:
-
- - #address-cells : number of cells required to define port/endpoint
- identifier, should be 1.
- - #size-cells : should be zero.
-
-
-Optional properties
--------------------
-
-- flash-leds: An array of phandles, each referring to a flash LED, a sub-node
- of the LED driver device node.
-
-- lens-focus: A phandle to the node of the focus lens controller.
-
-- rotation: The camera rotation is expressed as the angular difference in
- degrees between two reference systems, one relative to the camera module, and
- one defined on the external world scene to be captured when projected on the
- image sensor pixel array.
-
- A camera sensor has a 2-dimensional reference system 'Rc' defined by
- its pixel array read-out order. The origin is set to the first pixel
- being read out, the X-axis points along the column read-out direction
- towards the last columns, and the Y-axis along the row read-out
- direction towards the last row.
-
- A typical example for a sensor with a 2592x1944 pixel array matrix
- observed from the front is:
-
- 2591 X-axis 0
- <------------------------+ 0
- .......... ... ..........!
- .......... ... ..........! Y-axis
- ... !
- .......... ... ..........!
- .......... ... ..........! 1943
- V
-
- The external world scene reference system 'Rs' is a 2-dimensional
- reference system on the focal plane of the camera module. The origin is
- placed on the top-left corner of the visible scene, the X-axis points
- towards the right, and the Y-axis points towards the bottom of the
- scene. The top, bottom, left and right directions are intentionally not
- defined and depend on the environment in which the camera is used.
-
- A typical example of a (very common) picture of a shark swimming from
- left to right, as seen from the camera, is:
-
- 0 X-axis
- 0 +------------------------------------->
- !
- !
- !
- ! |\____)\___
- ! ) _____ __`<
- ! |/ )/
- !
- !
- !
- V
- Y-axis
-
- with the reference system 'Rs' placed on the camera focal plane:
-
- ¸.·˙!
- ¸.·˙ !
- _ ¸.·˙ !
- +-/ \-+¸.·˙ !
- | (o) | ! Camera focal plane
- +-----+˙·.¸ !
- ˙·.¸ !
- ˙·.¸ !
- ˙·.¸!
-
- When projected on the sensor's pixel array, the image and the associated
- reference system 'Rs' are typically (but not always) inverted, due to
- the camera module's lens optical inversion effect.
-
- Assuming the above represented scene of the swimming shark, the lens
- inversion projects the scene and its reference system onto the sensor
- pixel array, seen from the front of the camera sensor, as follows:
-
- Y-axis
- ^
- !
- !
- !
- ! |\_____)\__
- ! ) ____ ___.<
- ! |/ )/
- !
- !
- !
- 0 +------------------------------------->
- 0 X-axis
-
- Note the shark being upside-down.
-
- The resulting projected reference system is named 'Rp'.
-
- The camera rotation property is then defined as the angular difference
- in the counter-clockwise direction between the camera reference system
- 'Rc' and the projected scene reference system 'Rp'. It is expressed in
- degrees as a number in the range [0, 360[.
-
- Examples
-
- 0 degrees camera rotation:
-
-
- Y-Rp
- ^
- Y-Rc !
- ^ !
- ! !
- ! !
- ! !
- ! !
- ! !
- ! !
- ! !
- ! 0 +------------------------------------->
- ! 0 X-Rp
- 0 +------------------------------------->
- 0 X-Rc
-
-
- X-Rc 0
- <------------------------------------+ 0
- X-Rp 0 !
- <------------------------------------+ 0 !
- ! !
- ! !
- ! !
- ! !
- ! !
- ! !
- ! !
- ! V
- ! Y-Rc
- V
- Y-Rp
-
- 90 degrees camera rotation:
-
- 0 Y-Rc
- 0 +-------------------->
- ! Y-Rp
- ! ^
- ! !
- ! !
- ! !
- ! !
- ! !
- ! !
- ! !
- ! !
- ! !
- ! 0 +------------------------------------->
- ! 0 X-Rp
- !
- !
- !
- !
- V
- X-Rc
-
- 180 degrees camera rotation:
-
- 0
- <------------------------------------+ 0
- X-Rc !
- Y-Rp !
- ^ !
- ! !
- ! !
- ! !
- ! !
- ! !
- ! !
- ! V
- ! Y-Rc
- 0 +------------------------------------->
- 0 X-Rp
-
- 270 degrees camera rotation:
-
- 0 Y-Rc
- 0 +-------------------->
- ! 0
- ! <-----------------------------------+ 0
- ! X-Rp !
- ! !
- ! !
- ! !
- ! !
- ! !
- ! !
- ! !
- ! !
- ! V
- ! Y-Rp
- !
- !
- !
- !
- V
- X-Rc
-
-
- Example one - Webcam
-
- A camera module installed on the user facing part of a laptop screen
- casing used for video calls. The captured images are meant to be
- displayed in landscape mode (width > height) on the laptop screen.
-
- The camera is typically mounted upside-down to compensate the lens
- optical inversion effect:
-
- Y-Rp
- Y-Rc ^
- ^ !
- ! !
- ! ! |\_____)\__
- ! ! ) ____ ___.<
- ! ! |/ )/
- ! !
- ! !
- ! !
- ! 0 +------------------------------------->
- ! 0 X-Rp
- 0 +------------------------------------->
- 0 X-Rc
-
- The two reference systems are aligned, the resulting camera rotation is
- 0 degrees, no rotation correction needs to be applied to the resulting
- image once captured to memory buffers to correctly display it to users:
-
- +--------------------------------------+
- ! !
- ! !
- ! !
- ! |\____)\___ !
- ! ) _____ __`< !
- ! |/ )/ !
- ! !
- ! !
- ! !
- +--------------------------------------+
-
- If the camera sensor is not mounted upside-down to compensate for the
- lens optical inversion, the two reference systems will not be aligned,
- with 'Rp' being rotated 180 degrees relatively to 'Rc':
-
-
- X-Rc 0
- <------------------------------------+ 0
- !
- Y-Rp !
- ^ !
- ! !
- ! |\_____)\__ !
- ! ) ____ ___.< !
- ! |/ )/ !
- ! !
- ! !
- ! V
- ! Y-Rc
- 0 +------------------------------------->
- 0 X-Rp
-
- The image once captured to memory will then be rotated by 180 degrees:
-
- +--------------------------------------+
- ! !
- ! !
- ! !
- ! __/(_____/| !
- ! >.___ ____ ( !
- ! \( \| !
- ! !
- ! !
- ! !
- +--------------------------------------+
-
- A software rotation correction of 180 degrees should be applied to
- correctly display the image:
-
- +--------------------------------------+
- ! !
- ! !
- ! !
- ! |\____)\___ !
- ! ) _____ __`< !
- ! |/ )/ !
- ! !
- ! !
- ! !
- +--------------------------------------+
-
- Example two - Phone camera
-
- A camera installed on the back side of a mobile device facing away from
- the user. The captured images are meant to be displayed in portrait mode
- (height > width) to match the device screen orientation and the device
- usage orientation used when taking the picture.
-
- The camera sensor is typically mounted with its pixel array longer side
- aligned to the device longer side, upside-down mounted to compensate for
- the lens optical inversion effect:
-
- 0 Y-Rc
- 0 +-------------------->
- ! Y-Rp
- ! ^
- ! !
- ! !
- ! !
- ! ! |\_____)\__
- ! ! ) ____ ___.<
- ! ! |/ )/
- ! !
- ! !
- ! !
- ! 0 +------------------------------------->
- ! 0 X-Rp
- !
- !
- !
- !
- V
- X-Rc
-
- The two reference systems are not aligned and the 'Rp' reference
- system is rotated by 90 degrees in the counter-clockwise direction
- relatively to the 'Rc' reference system.
-
- The image once captured to memory will be rotated:
-
- +-------------------------------------+
- | _ _ |
- | \ / |
- | | | |
- | | | |
- | | > |
- | < | |
- | | | |
- | . |
- | V |
- +-------------------------------------+
-
- A correction of 90 degrees in counter-clockwise direction has to be
- applied to correctly display the image in portrait mode on the device
- screen:
-
- +--------------------+
- | |
- | |
- | |
- | |
- | |
- | |
- | |\____)\___ |
- | ) _____ __`< |
- | |/ )/ |
- | |
- | |
- | |
- | |
- | |
- +--------------------+
-
-- orientation: The orientation of a device (typically an image sensor or a flash
- LED) describing its mounting position relative to the usage orientation of the
- system where the device is installed on.
- Possible values are:
- 0 - Front. The device is mounted on the front facing side of the system.
- For mobile devices such as smartphones, tablets and laptops the front side is
- the user facing side.
- 1 - Back. The device is mounted on the back side of the system, which is
- defined as the opposite side of the front facing one.
- 2 - External. The device is not attached directly to the system but is
- attached in a way that allows it to move freely.
-
-Optional endpoint properties
-----------------------------
-
-- remote-endpoint: phandle to an 'endpoint' subnode of a remote device node.
-- slave-mode: a boolean property indicating that the link is run in slave mode.
- The default when this property is not specified is master mode. In the slave
- mode horizontal and vertical synchronization signals are provided to the
- slave device (data source) by the master device (data sink). In the master
- mode the data source device is also the source of the synchronization signals.
-- bus-type: data bus type. Possible values are:
- 1 - MIPI CSI-2 C-PHY
- 2 - MIPI CSI1
- 3 - CCP2
- 4 - MIPI CSI-2 D-PHY
- 5 - Parallel
- 6 - Bt.656
-- bus-width: number of data lines actively used, valid for the parallel busses.
-- data-shift: on the parallel data busses, if bus-width is used to specify the
- number of data lines, data-shift can be used to specify which data lines are
- used, e.g. "bus-width=<8>; data-shift=<2>;" means, that lines 9:2 are used.
-- hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
-- vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively.
- Note, that if HSYNC and VSYNC polarities are not specified, embedded
- synchronization may be required, where supported.
-- data-active: similar to HSYNC and VSYNC, specifies data line polarity.
-- data-enable-active: similar to HSYNC and VSYNC, specifies the data enable
- signal polarity.
-- field-even-active: field signal level during the even field data transmission.
-- pclk-sample: sample data on rising (1) or falling (0) edge of the pixel clock
- signal.
-- sync-on-green-active: active state of Sync-on-green (SoG) signal, 0/1 for
- LOW/HIGH respectively.
-- data-lanes: an array of physical data lane indexes. Position of an entry
- determines the logical lane number, while the value of an entry indicates
- physical lane, e.g. for 2-lane MIPI CSI-2 bus we could have
- "data-lanes = <1 2>;", assuming the clock lane is on hardware lane 0.
- If the hardware does not support lane reordering, monotonically
- incremented values shall be used from 0 or 1 onwards, depending on
- whether or not there is also a clock lane. This property is valid for
- serial busses only (e.g. MIPI CSI-2).
-- clock-lanes: an array of physical clock lane indexes. Position of an entry
- determines the logical lane number, while the value of an entry indicates
- physical lane, e.g. for a MIPI CSI-2 bus we could have "clock-lanes = <0>;",
- which places the clock lane on hardware lane 0. This property is valid for
- serial busses only (e.g. MIPI CSI-2). Note that for the MIPI CSI-2 bus this
- array contains only one entry.
-- clock-noncontinuous: a boolean property to allow MIPI CSI-2 non-continuous
- clock mode.
-- link-frequencies: Allowed data bus frequencies. For MIPI CSI-2, for
- instance, this is the actual frequency of the bus, not bits per clock per
- lane value. An array of 64-bit unsigned integers.
-- lane-polarities: an array of polarities of the lanes starting from the clock
- lane and followed by the data lanes in the same order as in data-lanes.
- Valid values are 0 (normal) and 1 (inverted). The length of the array
- should be the combined length of data-lanes and clock-lanes properties.
- If the lane-polarities property is omitted, the value must be interpreted
- as 0 (normal). This property is valid for serial busses only.
-- strobe: Whether the clock signal is used as clock (0) or strobe (1). Used
- with CCP2, for instance.
-
-Example
--------
-
-The example snippet below describes two data pipelines. ov772x and imx074 are
-camera sensors with a parallel and serial (MIPI CSI-2) video bus respectively.
-Both sensors are on the I2C control bus corresponding to the i2c0 controller
-node. ov772x sensor is linked directly to the ceu0 video host interface.
-imx074 is linked to ceu0 through the MIPI CSI-2 receiver (csi2). ceu0 has a
-(single) DMA engine writing captured data to memory. ceu0 node has a single
-'port' node which may indicate that at any time only one of the following data
-pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
-
- ceu0: ceu@fe910000 {
- compatible = "renesas,sh-mobile-ceu";
- reg = <0xfe910000 0xa0>;
- interrupts = <0x880>;
-
- mclk: master_clock {
- compatible = "renesas,ceu-clock";
- #clock-cells = <1>;
- clock-frequency = <50000000>; /* Max clock frequency */
- clock-output-names = "mclk";
- };
-
- port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* Parallel bus endpoint */
- ceu0_1: endpoint@1 {
- reg = <1>; /* Local endpoint # */
- remote = <&ov772x_1_1>; /* Remote phandle */
- bus-width = <8>; /* Used data lines */
- data-shift = <2>; /* Lines 9:2 are used */
-
- /* If hsync-active/vsync-active are missing,
- embedded BT.656 sync is used */
- hsync-active = <0>; /* Active low */
- vsync-active = <0>; /* Active low */
- data-active = <1>; /* Active high */
- pclk-sample = <1>; /* Rising */
- };
-
- /* MIPI CSI-2 bus endpoint */
- ceu0_0: endpoint@0 {
- reg = <0>;
- remote = <&csi2_2>;
- };
- };
- };
-
- i2c0: i2c@fff20000 {
- ...
- ov772x_1: camera@21 {
- compatible = "ovti,ov772x";
- reg = <0x21>;
- vddio-supply = <®ulator1>;
- vddcore-supply = <®ulator2>;
-
- clock-frequency = <20000000>;
- clocks = <&mclk 0>;
- clock-names = "xclk";
-
- port {
- /* With 1 endpoint per port no need for addresses. */
- ov772x_1_1: endpoint {
- bus-width = <8>;
- remote-endpoint = <&ceu0_1>;
- hsync-active = <1>;
- vsync-active = <0>; /* Who came up with an
- inverter here ?... */
- data-active = <1>;
- pclk-sample = <1>;
- };
- };
- };
-
- imx074: camera@1a {
- compatible = "sony,imx074";
- reg = <0x1a>;
- vddio-supply = <®ulator1>;
- vddcore-supply = <®ulator2>;
-
- clock-frequency = <30000000>; /* Shared clock with ov772x_1 */
- clocks = <&mclk 0>;
- clock-names = "sysclk"; /* Assuming this is the
- name in the datasheet */
- port {
- imx074_1: endpoint {
- clock-lanes = <0>;
- data-lanes = <1 2>;
- remote-endpoint = <&csi2_1>;
- };
- };
- };
- };
-
- csi2: csi2@ffc90000 {
- compatible = "renesas,sh-mobile-csi2";
- reg = <0xffc90000 0x1000>;
- interrupts = <0x17a0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@1 {
- compatible = "renesas,csi2c"; /* One of CSI2I and CSI2C. */
- reg = <1>; /* CSI-2 PHY #1 of 2: PHY_S,
- PHY_M has port address 0,
- is unused. */
- csi2_1: endpoint {
- clock-lanes = <0>;
- data-lanes = <2 1>;
- remote-endpoint = <&imx074_1>;
- };
- };
- port@2 {
- reg = <2>; /* port 2: link to the CEU */
-
- csi2_2: endpoint {
- remote-endpoint = <&ceu0_0>;
- };
- };
- };
+This file has moved to video-interfaces.yaml and video-interface-devices.yaml.
diff --git a/Documentation/devicetree/bindings/media/video-interfaces.yaml b/Documentation/devicetree/bindings/media/video-interfaces.yaml
new file mode 100644
index 000000000000..fefca7d98718
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/video-interfaces.yaml
@@ -0,0 +1,346 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/video-interfaces.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common bindings for video receiver and transmitter interface endpoints
+
+maintainers:
+ - Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ - Sakari Ailus <sakari.ailus@linux.intel.com>
+
+description: |
+ Video data pipelines usually consist of external devices, e.g. camera sensors,
+ controlled over an I2C, SPI or UART bus, and SoC internal IP blocks, including
+ video DMA engines and video data processors.
+
+ SoC internal blocks are described by DT nodes, placed similarly to other SoC
+ blocks. External devices are represented as child nodes of their respective
+ bus controller nodes, e.g. I2C.
+
+ Data interfaces on all video devices are described by their child 'port' nodes.
+ Configuration of a port depends on other devices participating in the data
+ transfer and is described by 'endpoint' subnodes.
+
+ device {
+ ...
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ ...
+ endpoint@0 { ... };
+ endpoint@1 { ... };
+ };
+ port@1 { ... };
+ };
+ };
+
+ If a port can be configured to work with more than one remote device on the same
+ bus, an 'endpoint' child node must be provided for each of them. If more than
+ one port is present in a device node or there is more than one endpoint at a
+ port, or port node needs to be associated with a selected hardware interface,
+ a common scheme using '#address-cells', '#size-cells' and 'reg' properties is
+ used.
+
+ All 'port' nodes can be grouped under optional 'ports' node, which allows to
+ specify #address-cells, #size-cells properties independently for the 'port'
+ and 'endpoint' nodes and any child device nodes a device might have.
+
+ Two 'endpoint' nodes are linked with each other through their 'remote-endpoint'
+ phandles. An endpoint subnode of a device contains all properties needed for
+ configuration of this device for data exchange with other device. In most
+ cases properties at the peer 'endpoint' nodes will be identical, however they
+ might need to be different when there is any signal modifications on the bus
+ between two devices, e.g. there are logic signal inverters on the lines.
+
+ It is allowed for multiple endpoints at a port to be active simultaneously,
+ where supported by a device. For example, in case where a data interface of
+ a device is partitioned into multiple data busses, e.g. 16-bit input port
+ divided into two separate ITU-R BT.656 8-bit busses. In such case bus-width
+ and data-shift properties can be used to assign physical data lines to each
+ endpoint node (logical bus).
+
+ Documenting bindings for devices
+ --------------------------------
+
+ All required and optional bindings the device supports shall be explicitly
+ documented in device DT binding documentation. This also includes port and
+ endpoint nodes for the device, including unit-addresses and reg properties
+ where relevant.
+
+ Please also see Documentation/devicetree/bindings/graph.txt .
+
+allOf:
+ - $ref: /schemas/graph.yaml#/$defs/endpoint-base
+
+properties:
+ slave-mode:
+ type: boolean
+ description:
+ Indicates that the link is run in slave mode. The default when this
+ property is not specified is master mode. In the slave mode horizontal and
+ vertical synchronization signals are provided to the slave device (data
+ source) by the master device (data sink). In the master mode the data
+ source device is also the source of the synchronization signals.
+
+ bus-type:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 1 # MIPI CSI-2 C-PHY
+ - 2 # MIPI CSI1
+ - 3 # CCP2
+ - 4 # MIPI CSI-2 D-PHY
+ - 5 # Parallel
+ - 6 # Bt.656
+ description:
+ Data bus type.
+
+ bus-width:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 64
+ description:
+ Number of data lines actively used, valid for the parallel busses.
+
+ data-shift:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 64
+ description:
+ On the parallel data busses, if bus-width is used to specify the number of
+ data lines, data-shift can be used to specify which data lines are used,
+ e.g. "bus-width=<8>; data-shift=<2>;" means, that lines 9:2 are used.
+
+ hsync-active:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1 ]
+ description:
+ Active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
+
+ vsync-active:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1 ]
+ description:
+ Active state of the VSYNC signal, 0/1 for LOW/HIGH respectively. Note,
+ that if HSYNC and VSYNC polarities are not specified, embedded
+ synchronization may be required, where supported.
+
+ data-active:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1 ]
+ description:
+ Similar to HSYNC and VSYNC, specifies data line polarity.
+
+ data-enable-active:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1 ]
+ description:
+ Similar to HSYNC and VSYNC, specifies the data enable signal polarity.
+
+ field-even-active:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1 ]
+ description:
+ Field signal level during the even field data transmission.
+
+ pclk-sample:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1 ]
+ description:
+ Sample data on rising (1) or falling (0) edge of the pixel clock signal.
+
+ sync-on-green-active:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1 ]
+ description:
+ Active state of Sync-on-green (SoG) signal, 0/1 for LOW/HIGH respectively.
+
+ data-lanes:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 8
+ items:
+ # Assume up to 9 physical lane indices
+ maximum: 8
+ description:
+ An array of physical data lane indexes. Position of an entry determines
+ the logical lane number, while the value of an entry indicates physical
+ lane, e.g. for 2-lane MIPI CSI-2 bus we could have "data-lanes = <1 2>;",
+ assuming the clock lane is on hardware lane 0. If the hardware does not
+ support lane reordering, monotonically incremented values shall be used
+ from 0 or 1 onwards, depending on whether or not there is also a clock
+ lane. This property is valid for serial busses only (e.g. MIPI CSI-2).
+
+ clock-lanes:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ # Assume up to 9 physical lane indices
+ maximum: 8
+ description:
+ Physical clock lane index. Position of an entry determines
+ the logical lane number, while the value of an entry indicates physical
+ lane, e.g. for a MIPI CSI-2 bus we could have "clock-lanes = <0>;", which
+ places the clock lane on hardware lane 0. This property is valid for
+ serial busses only (e.g. MIPI CSI-2).
+
+ clock-noncontinuous:
+ type: boolean
+ description:
+ Allow MIPI CSI-2 non-continuous clock mode.
+
+ link-frequencies:
+ $ref: /schemas/types.yaml#/definitions/uint64-array
+ description:
+ Allowed data bus frequencies. For MIPI CSI-2, for instance, this is the
+ actual frequency of the bus, not bits per clock per lane value. An array
+ of 64-bit unsigned integers.
+
+ lane-polarities:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 9
+ items:
+ enum: [ 0, 1 ]
+ description:
+ An array of polarities of the lanes starting from the clock lane and
+ followed by the data lanes in the same order as in data-lanes. Valid
+ values are 0 (normal) and 1 (inverted). The length of the array should be
+ the combined length of data-lanes and clock-lanes properties. If the
+ lane-polarities property is omitted, the value must be interpreted as 0
+ (normal). This property is valid for serial busses only.
+
+ strobe:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1 ]
+ description:
+ Whether the clock signal is used as clock (0) or strobe (1). Used with
+ CCP2, for instance.
+
+additionalProperties: true
+
+examples:
+ # The example snippet below describes two data pipelines. ov772x and imx074
+ # are camera sensors with a parallel and serial (MIPI CSI-2) video bus
+ # respectively. Both sensors are on the I2C control bus corresponding to the
+ # i2c0 controller node. ov772x sensor is linked directly to the ceu0 video
+ # host interface. imx074 is linked to ceu0 through the MIPI CSI-2 receiver
+ # (csi2). ceu0 has a (single) DMA engine writing captured data to memory.
+ # ceu0 node has a single 'port' node which may indicate that at any time
+ # only one of the following data pipelines can be active:
+ # ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
+ - |
+ ceu@fe910000 {
+ compatible = "renesas,sh-mobile-ceu";
+ reg = <0xfe910000 0xa0>;
+ interrupts = <0x880>;
+
+ mclk: master_clock {
+ compatible = "renesas,ceu-clock";
+ #clock-cells = <1>;
+ clock-frequency = <50000000>; /* Max clock frequency */
+ clock-output-names = "mclk";
+ };
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Parallel bus endpoint */
+ ceu0_1: endpoint@1 {
+ reg = <1>; /* Local endpoint # */
+ remote-endpoint = <&ov772x_1_1>; /* Remote phandle */
+ bus-width = <8>; /* Used data lines */
+ data-shift = <2>; /* Lines 9:2 are used */
+
+ /* If hsync-active/vsync-active are missing,
+ embedded BT.656 sync is used */
+ hsync-active = <0>; /* Active low */
+ vsync-active = <0>; /* Active low */
+ data-active = <1>; /* Active high */
+ pclk-sample = <1>; /* Rising */
+ };
+
+ /* MIPI CSI-2 bus endpoint */
+ ceu0_0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&csi2_2>;
+ };
+ };
+ };
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera@21 {
+ compatible = "ovti,ov772x";
+ reg = <0x21>;
+ vddio-supply = <®ulator1>;
+ vddcore-supply = <®ulator2>;
+
+ clock-frequency = <20000000>;
+ clocks = <&mclk 0>;
+ clock-names = "xclk";
+
+ port {
+ /* With 1 endpoint per port no need for addresses. */
+ ov772x_1_1: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&ceu0_1>;
+ hsync-active = <1>;
+ vsync-active = <0>; /* Who came up with an
+ inverter here ?... */
+ data-active = <1>;
+ pclk-sample = <1>;
+ };
+ };
+ };
+
+ camera@1a {
+ compatible = "sony,imx074";
+ reg = <0x1a>;
+ vddio-supply = <®ulator1>;
+ vddcore-supply = <®ulator2>;
+
+ clock-frequency = <30000000>; /* Shared clock with ov772x_1 */
+ clocks = <&mclk 0>;
+ clock-names = "sysclk"; /* Assuming this is the
+ name in the datasheet */
+ port {
+ imx074_1: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&csi2_1>;
+ };
+ };
+ };
+ };
+
+ csi2: csi2@ffc90000 {
+ compatible = "renesas,sh-mobile-csi2";
+ reg = <0xffc90000 0x1000>;
+ interrupts = <0x17a0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ compatible = "renesas,csi2c"; /* One of CSI2I and CSI2C. */
+ reg = <1>; /* CSI-2 PHY #1 of 2: PHY_S,
+ PHY_M has port address 0,
+ is unused. */
+ csi2_1: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <2 1>;
+ remote-endpoint = <&imx074_1>;
+ };
+ };
+ port@2 {
+ reg = <2>; /* port 2: link to the CEU */
+
+ csi2_2: endpoint {
+ remote-endpoint = <&ceu0_0>;
+ };
+ };
+ };
+
+...
--
2.25.1
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v3 2/2] dt-bindings: media: Use graph and video-interfaces schemas
2020-12-10 21:16 [PATCH v2 0/2] dt-bindings: media: Convert video-interfaces.txt to schemas Rob Herring
` (3 preceding siblings ...)
2020-12-10 21:16 ` [PATCH v3 1/2] media: dt-bindings: Convert video-interfaces.txt properties " Rob Herring
@ 2020-12-10 21:16 ` Rob Herring
2020-12-16 15:19 ` Laurent Pinchart
2020-12-10 22:39 ` [PATCH v2 0/2] dt-bindings: media: Convert video-interfaces.txt to schemas Rob Herring
5 siblings, 1 reply; 21+ messages in thread
From: Rob Herring @ 2020-12-10 21:16 UTC (permalink / raw)
To: Guennadi Liakhovetski, Sakari Ailus, Maxime Ripard,
Mauro Carvalho Chehab, Jacopo Mondi, Laurent Pinchart
Cc: devicetree, linux-kernel, linux-media
Now that we have graph and video-interfaces schemas, rework the media
related schemas to use them.
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Jacopo Mondi <jacopo@jmondi.org>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: linux-media@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
v3:
- Add mipi-ccs.yaml, ovti,ov02a10.yaml
v2:
- Update based on graph schema changes and addition of video-interfaces
schemas
---
.../media/allwinner,sun4i-a10-csi.yaml | 11 +-
.../media/allwinner,sun6i-a31-csi.yaml | 12 +-
.../bindings/media/i2c/adv7180.yaml | 36 ++----
.../bindings/media/i2c/adv7604.yaml | 37 ++----
.../bindings/media/i2c/aptina,mt9v111.yaml | 4 +-
.../bindings/media/i2c/imi,rdacm2x-gmsl.yaml | 30 +----
.../devicetree/bindings/media/i2c/imx219.yaml | 21 ++--
.../bindings/media/i2c/maxim,max9286.yaml | 101 ++++------------
.../bindings/media/i2c/mipi-ccs.yaml | 15 +--
.../devicetree/bindings/media/i2c/ov5647.yaml | 20 +---
.../devicetree/bindings/media/i2c/ov8856.yaml | 21 +---
.../bindings/media/i2c/ovti,ov02a10.yaml | 30 ++---
.../bindings/media/i2c/ovti,ov2680.yaml | 6 +-
.../bindings/media/i2c/ovti,ov772x.yaml | 9 +-
.../bindings/media/i2c/sony,imx214.yaml | 25 ++--
.../bindings/media/i2c/sony,imx274.yaml | 3 +-
.../bindings/media/marvell,mmp2-ccic.yaml | 15 +--
.../bindings/media/nxp,imx7-csi.yaml | 5 +-
.../bindings/media/nxp,imx7-mipi-csi2.yaml | 32 +----
.../bindings/media/renesas,ceu.yaml | 17 +--
.../bindings/media/renesas,csi2.yaml | 54 ++-------
.../bindings/media/renesas,vin.yaml | 113 +++---------------
.../bindings/media/rockchip-isp1.yaml | 40 +------
.../bindings/media/st,stm32-dcmi.yaml | 18 +--
.../devicetree/bindings/media/ti,cal.yaml | 55 ++-------
.../bindings/media/xilinx/xlnx,csi2rxss.yaml | 39 +-----
26 files changed, 169 insertions(+), 600 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
index 09318830db47..6ced94064215 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
@@ -67,14 +67,14 @@ properties:
interconnect-names:
const: dma-mem
- # See ./video-interfaces.txt for details
port:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/port-base
additionalProperties: false
properties:
endpoint:
- type: object
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
bus-width:
@@ -83,7 +83,6 @@ properties:
data-active: true
hsync-active: true
pclk-sample: true
- remote-endpoint: true
vsync-active: true
required:
@@ -91,12 +90,8 @@ properties:
- data-active
- hsync-active
- pclk-sample
- - remote-endpoint
- vsync-active
- required:
- - endpoint
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
index 1fd9b5532a21..8b568072a069 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
@@ -40,17 +40,15 @@ properties:
resets:
maxItems: 1
- # See ./video-interfaces.txt for details
port:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/port-base
properties:
endpoint:
- type: object
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
- remote-endpoint: true
-
bus-width:
enum: [ 8, 10, 12, 16 ]
@@ -60,10 +58,6 @@ properties:
required:
- bus-width
- - remote-endpoint
-
- required:
- - endpoint
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/media/i2c/adv7180.yaml b/Documentation/devicetree/bindings/media/i2c/adv7180.yaml
index d8c54f9d9506..bcfd93739b4f 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv7180.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/adv7180.yaml
@@ -36,17 +36,9 @@ properties:
maxItems: 1
port:
- type: object
- description:
- A node containing a single endpoint as doucmented in
- Documentation/devicetree/bindings/media/video-interfaces.txt
-
- ports:
- type: object
- description:
- A node containing input and output port nodes with endpoint definitions
- as documented in
- Documentation/devicetree/bindings/media/video-interfaces.txt
+ $ref: /schemas/graph.yaml#/properties/port
+
+ ports: true
additionalProperties: false
@@ -80,25 +72,20 @@ allOf:
then:
properties:
ports:
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- '#address-cells':
- const: 1
- '#size-cells':
- const: 0
port@3:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: Output port
patternProperties:
"^port@[0-2]$":
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: Input port
required:
- port@3
- additionalProperties: false
-
required:
- ports
@@ -110,25 +97,20 @@ allOf:
then:
properties:
ports:
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- '#address-cells':
- const: 1
- '#size-cells':
- const: 0
port@6:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: Output port
patternProperties:
"^port@[0-5]$":
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: Input port
required:
- port@6
- additionalProperties: false
-
required:
- ports
diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml
index 407baddfaa1d..df634b0c1f8c 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml
@@ -64,16 +64,12 @@ properties:
description:
Select which input is selected after reset.
- ports:
- type: object
- description:
- A node containing input and output port nodes with endpoint definitions
- as documented in
- Documentation/devicetree/bindings/media/video-interfaces.txt
+ ports: true
required:
- compatible
- reg
+ - ports
additionalProperties: false
@@ -86,26 +82,19 @@ allOf:
then:
properties:
ports:
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- '#address-cells':
- const: 1
- '#size-cells':
- const: 0
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: Input port
+
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: Output port
required:
- port@1
- additionalProperties: false
-
- required:
- - ports
-
- if:
properties:
compatible:
@@ -114,28 +103,20 @@ allOf:
then:
properties:
ports:
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- '#address-cells':
- const: 1
- '#size-cells':
- const: 0
port@2:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: Output port
patternProperties:
"^port@[0-1]$":
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: Input port
required:
- port@2
- additionalProperties: false
-
- required:
- - ports
-
examples:
- |
#include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
index ff9546e95d05..e53b8d65f381 100644
--- a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
@@ -41,9 +41,9 @@ properties:
maxItems: 1
port:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: |
- Output video port. See ../video-interfaces.txt.
+ Output video port.
required:
- compatible
diff --git a/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml
index 3dc06c628e64..e57575c44930 100644
--- a/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml
@@ -86,33 +86,9 @@ properties:
maxItems: 3
port:
- type: object
- additionalProperties: false
- description: -|
- Connection to the remote GMSL endpoint are modelled using the OF graph
- bindings in accordance with the video interface bindings defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt.
-
- The device node contains a single "port" child node with a single
- "endpoint" sub-device.
-
- properties:
- endpoint:
- type: object
- additionalProperties: false
-
- properties:
- remote-endpoint:
- description: -|
- phandle to the remote GMSL endpoint sub-node in the remote node
- port.
- maxItems: 1
-
- required:
- - remote-endpoint
-
- required:
- - endpoint
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Connection to the remote GMSL endpoint.
required:
- compatible
diff --git a/Documentation/devicetree/bindings/media/i2c/imx219.yaml b/Documentation/devicetree/bindings/media/i2c/imx219.yaml
index dfc4d29a4f04..012c0565d8ae 100644
--- a/Documentation/devicetree/bindings/media/i2c/imx219.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/imx219.yaml
@@ -44,12 +44,15 @@ properties:
Reference to the GPIO connected to the xclr pin, if any.
Must be released (set high) after all supplies are applied.
- # See ../video-interfaces.txt for more details
port:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
properties:
endpoint:
- type: object
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
properties:
data-lanes:
description: |-
@@ -60,16 +63,8 @@ properties:
- const: 1
- const: 2
- clock-noncontinuous:
- type: boolean
- description: |-
- MIPI CSI-2 clock is non-continuous if this property is present,
- otherwise it's continuous.
-
- link-frequencies:
- $ref: /schemas/types.yaml#/definitions/uint64-array
- description:
- Allowed data bus frequencies.
+ clock-noncontinuous: true
+ link-frequencies: true
required:
- link-frequencies
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
index 9ea827092fdd..3a52dc81eabd 100644
--- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
@@ -52,81 +52,41 @@ properties:
const: 2
ports:
- type: object
- description: |
- The connections to the MAX9286 GMSL and its endpoint nodes are modelled
- using the OF graph bindings in accordance with the video interface
- bindings defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt.
-
- The following table lists the port number corresponding to each device
- port.
-
- Port Description
- ----------------------------------------
- Port 0 GMSL Input 0
- Port 1 GMSL Input 1
- Port 2 GMSL Input 2
- Port 3 GMSL Input 3
- Port 4 CSI-2 Output
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- '#address-cells':
- const: 1
-
- '#size-cells':
- const: 0
-
- port@[0-3]:
- type: object
- properties:
- reg:
- enum: [ 0, 1, 2, 3 ]
-
- endpoint:
- type: object
-
- properties:
- remote-endpoint:
- description: |
- phandle to the remote GMSL source endpoint subnode in the
- remote node port.
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: GMSL Input 0
- required:
- - remote-endpoint
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: GMSL Input 1
- required:
- - reg
- - endpoint
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: GMSL Input 2
- additionalProperties: false
+ port@3:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: GMSL Input 3
port@4:
- type: object
- properties:
- reg:
- const: 4
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: CSI-2 Output
+ properties:
endpoint:
- type: object
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
- remote-endpoint:
- description: phandle to the remote CSI-2 sink endpoint.
-
- data-lanes:
- description: array of physical CSI-2 data lane indexes.
+ data-lanes: true
required:
- - remote-endpoint
- data-lanes
- required:
- - reg
- - endpoint
-
- additionalProperties: false
-
required:
- port@4
@@ -184,25 +144,8 @@ properties:
requirements of the currently connected remote device.
port:
- type: object
-
- properties:
- endpoint:
- type: object
-
- properties:
- remote-endpoint:
- description: phandle to the MAX9286 sink endpoint.
-
- required:
- - remote-endpoint
-
- additionalProperties: false
-
- required:
- - endpoint
-
- additionalProperties: false
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Connection to the MAX9286 sink.
required:
- compatible
diff --git a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
index d94bd67ccea1..3657f2f41098 100644
--- a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
@@ -73,19 +73,16 @@ properties:
enum: [ 0, 180 ]
port:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
properties:
endpoint:
- type: object
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
properties:
- link-frequencies:
- $ref: /schemas/types.yaml#/definitions/uint64-array
- description: List of allowed data link frequencies.
- data-lanes:
- minItems: 1
- maxItems: 8
bus-type:
- description: The type of the data bus.
oneOf:
- const: 1 # CSI-2 C-PHY
- const: 3 # CCP2
diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.yaml b/Documentation/devicetree/bindings/media/i2c/ov5647.yaml
index 280c62afae13..3b1ea9da437a 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov5647.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ov5647.yaml
@@ -31,27 +31,15 @@ properties:
maxItems: 1
port:
- type: object
- description: |-
- Should contain one endpoint sub-node used to model connection to the
- video receiver according to the specification defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt.
+ $ref: /schemas/graph.yaml#/$defs/port-base
properties:
endpoint:
- type: object
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
- remote-endpoint:
- description: |-
- phandle to the video receiver input port.
-
- clock-noncontinuous:
- type: boolean
- description: |-
- Set to true to allow MIPI CSI-2 non-continuous clock operations.
-
- additionalProperties: false
+ clock-noncontinuous: true
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
index cde85553fd01..c29b057ae922 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
@@ -57,16 +57,13 @@ properties:
active low.
port:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/port-base
additionalProperties: false
- description:
- A node containing an output port node with an endpoint definition
- as documented in
- Documentation/devicetree/bindings/media/video-interfaces.txt
properties:
endpoint:
- type: object
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
data-lanes:
@@ -79,18 +76,13 @@ properties:
- const: 4
link-frequencies:
- $ref: /schemas/types.yaml#/definitions/uint64-array
- description:
- Allowed data bus frequencies. 360000000, 180000000 Hz or both
- are supported by the driver.
-
+ maxItems: 2
+ items:
+ enum: [ 360000000, 180000000 ]
required:
- link-frequencies
- required:
- - endpoint
-
required:
- compatible
- reg
@@ -139,4 +131,3 @@ examples:
};
};
...
-
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
index 1c3879ec4122..aaf541cd3833 100644
--- a/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
@@ -17,6 +17,9 @@ description: |-
@ 1600x1200 (UXGA) resolution transferred over a 1-lane MIPI interface. The
sensor output is available via CSI-2 serial data output.
+allOf:
+ - $ref: /schemas/media/video-interface-device.yaml#
+
properties:
compatible:
const: ovti,ov02a10
@@ -66,42 +69,33 @@ properties:
maxItems: 1
rotation:
- description:
- Definition of the sensor's placement.
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
- - enum:
- - 0 # Sensor Mounted Upright
- - 180 # Sensor Mounted Upside Down
- default: 0
-
- # See ../video-interfaces.txt for details
+ enum:
+ - 0 # Sensor Mounted Upright
+ - 180 # Sensor Mounted Upside Down
+ default: 0
+
port:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/port-base
additionalProperties: false
description:
Output port node, single endpoint describing the CSI-2 transmitter.
properties:
endpoint:
- type: object
- additionalProperties: false
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
- link-frequencies: true
ovti,mipi-clock-voltage:
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: "/schemas/types.yaml#/definitions/uint32"
description:
Definition of MIPI clock voltage unit. This entry corresponds to
the link speed defined by the 'link-frequencies' property.
If present, the value shall be in the range of 0-4.
default: 4
- remote-endpoint: true
required:
- link-frequencies
- - remote-endpoint
required:
- endpoint
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
index 43bf749807e1..cf456f8d9ddc 100644
--- a/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
@@ -50,11 +50,9 @@ properties:
Definition of the regulator used as digital power supply.
port:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
- A node containing an output port node with an endpoint definition
- as documented in
- Documentation/devicetree/bindings/media/video-interfaces.txt
+ A node containing an output port node.
required:
- compatible
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
index 6866c2cdac50..44529425ce3a 100644
--- a/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
@@ -37,13 +37,14 @@ properties:
maxItems: 1
port:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/port-base
description: |
- Video output port. See ../video-interfaces.txt.
+ Video output port.
properties:
endpoint:
- type: object
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
bus-type:
@@ -91,8 +92,6 @@ properties:
required:
- bus-type
- unevaluatedProperties: false
-
additionalProperties: false
required:
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
index 1a3590dd0e98..1b69b6342978 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
@@ -15,6 +15,9 @@ description: |
interface. Image data is sent through MIPI CSI-2, through 2 or 4 lanes at a
maximum throughput of 1.2Gbps/lane.
+allOf:
+ - $ref: ../video-interface-devices.yaml#
+
properties:
compatible:
const: sony,imx214
@@ -47,25 +50,21 @@ properties:
description: Chip digital core regulator (1.12V).
maxItems: 1
- flash-leds:
- description: See ../video-interfaces.txt
-
- lens-focus:
- description: See ../video-interfaces.txt
+ flash-leds: true
+ lens-focus: true
port:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/port-base
description: |
- Video output port. See ../video-interfaces.txt.
+ Video output port.
properties:
endpoint:
- type: object
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
data-lanes:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- description: See ../video-interfaces.txt
anyOf:
- items:
- const: 1
@@ -76,16 +75,12 @@ properties:
- const: 3
- const: 4
- link-frequencies:
- $ref: /schemas/types.yaml#/definitions/uint64-array
- description: See ../video-interfaces.txt
+ link-frequencies: true
required:
- data-lanes
- link-frequencies
- unevaluatedProperties: false
-
additionalProperties: false
required:
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
index f697e1a20beb..90828020e42a 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
@@ -44,8 +44,7 @@ properties:
maxItems: 1
port:
- type: object
- description: Output video port. See ../video-interfaces.txt.
+ $ref: /schemas/graph.yaml#/properties/port
required:
- compatible
diff --git a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
index 49bff738aca5..9e85c70d1a1f 100644
--- a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
+++ b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
@@ -24,29 +24,20 @@ properties:
maxItems: 1
port:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/port-base
additionalProperties: false
properties:
endpoint:
- type: object
- additionalProperties: false
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
- # Properties described in
- # Documentation/devicetree/bindings/media/video-interfaces.txt
properties:
- remote-endpoint: true
hsync-active: true
vsync-active: true
pclk-sample: true
bus-type: true
- required:
- - remote-endpoint
-
- required:
- - endpoint
-
clocks:
minItems: 1
maxItems: 3
diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
index 4e81a47e60ac..d91575b8ebb9 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
@@ -33,10 +33,7 @@ properties:
- const: mclk
port:
- type: object
- description:
- A node containing input port nodes with endpoint definitions as documented
- in Documentation/devicetree/bindings/media/video-interfaces.txt
+ $ref: /schemas/graph.yaml#/properties/port
required:
- compatible
diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
index 0668332959e7..be47a7b62ca9 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
@@ -58,35 +58,22 @@ properties:
Differential receiver (HS-RX) settle time
ports:
- type: object
- description:
- A node containing input and output port nodes with endpoint definitions
- as documented in
- Documentation/devicetree/bindings/media/video-interfaces.txt
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- '#address-cells':
- const: 1
-
- '#size-cells':
- const: 0
-
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
description:
Input port node, single endpoint describing the CSI-2 transmitter.
properties:
- reg:
- const: 0
-
endpoint:
- type: object
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
data-lanes:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- description: See ../video-interfaces.txt
oneOf:
- items:
- const: 1
@@ -94,18 +81,11 @@ properties:
- const: 1
- const: 2
- remote-endpoint: true
-
required:
- data-lanes
- - remote-endpoint
-
- additionalProperties: false
-
- additionalProperties: false
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
Output port node
diff --git a/Documentation/devicetree/bindings/media/renesas,ceu.yaml b/Documentation/devicetree/bindings/media/renesas,ceu.yaml
index c7e1e4fe67e6..50e0740af15a 100644
--- a/Documentation/devicetree/bindings/media/renesas,ceu.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,ceu.yaml
@@ -34,18 +34,15 @@ properties:
maxItems: 1
port:
- type: object
- additionalProperties: false
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
properties:
endpoint:
- type: object
- additionalProperties: false
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
- # Properties described in
- # Documentation/devicetree/bindings/media/video-interfaces.txt
properties:
- remote-endpoint: true
hsync-active: true
vsync-active: true
field-even-active: false
@@ -53,12 +50,6 @@ properties:
enum: [8, 16]
default: 8
- required:
- - remote-endpoint
-
- required:
- - endpoint
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/media/renesas,csi2.yaml b/Documentation/devicetree/bindings/media/renesas,csi2.yaml
index 533c2f181db7..20396f1be999 100644
--- a/Documentation/devicetree/bindings/media/renesas,csi2.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,csi2.yaml
@@ -46,24 +46,19 @@ properties:
maxItems: 1
ports:
- type: object
- description:
- A node containing input and output port nodes with endpoint definitions
- as documented in
- Documentation/devicetree/bindings/media/video-interfaces.txt
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
description:
Input port node, single endpoint describing the CSI-2 transmitter.
properties:
- reg:
- const: 0
-
endpoint:
- type: object
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
clock-lanes:
@@ -72,50 +67,19 @@ properties:
data-lanes:
maxItems: 1
- remote-endpoint: true
-
required:
- clock-lanes
- data-lanes
- - remote-endpoint
-
- additionalProperties: false
-
- additionalProperties: false
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
Output port node, multiple endpoints describing all the R-Car VIN
modules connected the CSI-2 receiver.
- properties:
- '#address-cells':
- const: 1
-
- '#size-cells':
- const: 0
-
- reg:
- const: 1
-
- patternProperties:
- "^endpoint@[0-9a-f]$":
- type: object
-
- properties:
- reg:
- maxItems: 1
-
- remote-endpoint: true
-
- required:
- - reg
- - remote-endpoint
-
- additionalProperties: false
-
- additionalProperties: false
+ required:
+ - port@0
+ - port@1
required:
- compatible
diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml
index ad2fe660364b..fe7c4cbfe4ba 100644
--- a/Documentation/devicetree/bindings/media/renesas,vin.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml
@@ -69,15 +69,15 @@ properties:
#The per-board settings for Gen2 and RZ/G1 platforms:
port:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
description:
- A node containing a parallel input with a single endpoint definitions as
- documented in
- Documentation/devicetree/bindings/media/video-interfaces.txt
+ A node containing a parallel input
properties:
endpoint:
- type: object
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
hsync-active:
@@ -106,15 +106,6 @@ properties:
data-active: true
- remote-endpoint: true
-
- required:
- - remote-endpoint
-
- additionalProperties: false
-
- additionalProperties: false
-
#The per-board settings for Gen3 and RZ/G2 platforms:
renesas,id:
description: VIN channel number
@@ -123,23 +114,18 @@ properties:
maximum: 15
ports:
- type: object
- description:
- A node containing input nodes with endpoint definitions as documented in
- Documentation/devicetree/bindings/media/video-interfaces.txt
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
Input port node, single endpoint describing a parallel input source.
properties:
- reg:
- const: 0
-
endpoint:
- type: object
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
hsync-active:
@@ -168,98 +154,29 @@ properties:
data-active: true
- remote-endpoint: true
-
- required:
- - remote-endpoint
-
- additionalProperties: false
-
- required:
- - endpoint
-
- additionalProperties: false
-
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
Input port node, multiple endpoints describing all the R-Car CSI-2
modules connected the VIN.
properties:
- '#address-cells':
- const: 1
-
- '#size-cells':
- const: 0
-
- reg:
- const: 1
-
endpoint@0:
- type: object
+ $ref: /schemas/graph.yaml#/properties/endpoint
description: Endpoint connected to CSI20.
- properties:
- reg:
- const: 0
-
- remote-endpoint: true
-
- required:
- - reg
- - remote-endpoint
-
- additionalProperties: false
-
endpoint@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/endpoint
description: Endpoint connected to CSI21.
- properties:
- reg:
- const: 1
-
- remote-endpoint: true
-
- required:
- - reg
- - remote-endpoint
-
- additionalProperties: false
-
endpoint@2:
- type: object
+ $ref: /schemas/graph.yaml#/properties/endpoint
description: Endpoint connected to CSI40.
- properties:
- reg:
- const: 2
-
- remote-endpoint: true
-
- required:
- - reg
- - remote-endpoint
-
- additionalProperties: false
-
endpoint@3:
- type: object
+ $ref: /schemas/graph.yaml#/properties/endpoint
description: Endpoint connected to CSI41.
- properties:
- reg:
- const: 3
-
- remote-endpoint: true
-
- required:
- - reg
- - remote-endpoint
-
- additionalProperties: false
-
anyOf:
- required:
- endpoint@0
@@ -270,8 +187,6 @@ properties:
- required:
- endpoint@3
- additionalProperties: false
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/media/rockchip-isp1.yaml b/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
index 2004c054ed1a..a6b1eff879ed 100644
--- a/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
+++ b/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
@@ -56,56 +56,26 @@ properties:
power-domains:
maxItems: 1
- # See ./video-interfaces.txt for details
ports:
- type: object
- additionalProperties: false
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
-
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
description: connection point for sensors at MIPI-DPHY RX0
- additionalProperties: false
properties:
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
-
- reg:
- const: 0
-
- patternProperties:
endpoint:
- type: object
- additionalProperties: false
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
- reg:
- maxItems: 1
-
data-lanes:
minItems: 1
maxItems: 4
- remote-endpoint: true
-
- required:
- - reg
- - "#address-cells"
- - "#size-cells"
-
required:
- - "#address-cells"
- - "#size-cells"
- port@0
required:
diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
index c18574bb3e81..41e1d0cd80e5 100644
--- a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
+++ b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
@@ -37,16 +37,15 @@ properties:
maxItems: 1
port:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
description:
- DCMI supports a single port node with parallel bus. It should contain
- one 'port' child node with child 'endpoint' node. Please refer to the
- bindings defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt.
+ DCMI supports a single port node with parallel bus.
properties:
endpoint:
- type: object
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
bus-type:
@@ -57,8 +56,6 @@ properties:
enum: [8, 10, 12, 14]
default: 8
- remote-endpoint: true
-
allOf:
- if:
properties:
@@ -73,14 +70,9 @@ properties:
enum: [8]
required:
- - remote-endpoint
- bus-type
- pclk-sample
- unevaluatedProperties: false
-
- additionalProperties: false
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/media/ti,cal.yaml b/Documentation/devicetree/bindings/media/ti,cal.yaml
index 5e066629287d..65177cd69514 100644
--- a/Documentation/devicetree/bindings/media/ti,cal.yaml
+++ b/Documentation/devicetree/bindings/media/ti,cal.yaml
@@ -15,10 +15,7 @@ description: |-
processing capability to connect CSI2 image-sensor modules to the
DRA72x device.
- CAL supports 2 camera port nodes on MIPI bus. Each CSI2 camera port nodes
- should contain a 'port' child node with child 'endpoint' node. Please
- refer to the bindings defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt.
+ CAL supports 2 camera port nodes on MIPI bus.
properties:
compatible:
@@ -67,31 +64,19 @@ properties:
Documentation/devicetree/bindings/power/power_domain.txt
maxItems: 1
- # See ./video-interfaces.txt for details
ports:
- type: object
- additionalProperties: false
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
-
port@0:
- type: object
- additionalProperties: false
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: CSI2 Port #0
properties:
- reg:
- const: 0
- description: CSI2 Port #0
-
- patternProperties:
endpoint:
- type: object
- additionalProperties: false
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
clock-lanes:
@@ -101,24 +86,15 @@ properties:
minItems: 1
maxItems: 4
- remote-endpoint: true
-
- required:
- - reg
-
port@1:
- type: object
- additionalProperties: false
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: CSI2 Port #1
properties:
- reg:
- const: 1
- description: CSI2 Port #1
-
- patternProperties:
endpoint:
- type: object
- additionalProperties: false
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
clock-lanes:
@@ -128,14 +104,7 @@ properties:
minItems: 1
maxItems: 4
- remote-endpoint: true
-
- required:
- - reg
-
required:
- - "#address-cells"
- - "#size-cells"
- port@0
required:
diff --git a/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml
index 2961a5b6872f..7d77823dbb7a 100644
--- a/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml
+++ b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml
@@ -97,24 +97,21 @@ properties:
maxItems: 1
ports:
- type: object
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/port-base
description: |
Input / sink port node, single endpoint describing the
CSI-2 transmitter.
properties:
- reg:
- const: 0
-
endpoint:
- type: object
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
properties:
-
data-lanes:
description: |
This is required only in the sink port 0 endpoint which
@@ -130,41 +127,17 @@ properties:
- const: 3
- const: 4
- remote-endpoint: true
-
required:
- data-lanes
- - remote-endpoint
-
- additionalProperties: false
- additionalProperties: false
+ unevaluatedProperties: false
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: |
Output / source port node, endpoint describing modules
connected the CSI-2 receiver.
- properties:
-
- reg:
- const: 1
-
- endpoint:
- type: object
-
- properties:
-
- remote-endpoint: true
-
- required:
- - remote-endpoint
-
- additionalProperties: false
-
- additionalProperties: false
-
required:
- compatible
- reg
--
2.25.1
^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [PATCH v2 0/2] dt-bindings: media: Convert video-interfaces.txt to schemas
2020-12-10 21:16 [PATCH v2 0/2] dt-bindings: media: Convert video-interfaces.txt to schemas Rob Herring
` (4 preceding siblings ...)
2020-12-10 21:16 ` [PATCH v3 2/2] dt-bindings: media: Use graph and video-interfaces schemas Rob Herring
@ 2020-12-10 22:39 ` Rob Herring
5 siblings, 0 replies; 21+ messages in thread
From: Rob Herring @ 2020-12-10 22:39 UTC (permalink / raw)
To: Guennadi Liakhovetski, Sakari Ailus, Maxime Ripard,
Mauro Carvalho Chehab, Jacopo Mondi, Laurent Pinchart
Cc: devicetree, linux-kernel, linux-media
On Thu, Dec 10, 2020 at 03:16:20PM -0600, Rob Herring wrote:
> This series converts video-interfaces.txt to DT schema which in turn is
> based on converting the graph binding to a schema. All the media users
> are converted to use the graph and video-interfaces schemas.
>
> Based on media tree commit a3f132df0e5f. This is dependent on dt-schema
> changes not yet committed[1]. Please review those too.
Sigh, ignore the v2 patches...
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 1/2] media: dt-bindings: Convert video-interfaces.txt properties to schemas
2020-12-10 21:16 ` [PATCH v2 1/2] media: dt-bindings: Convert video-interfaces.txt properties " Rob Herring
@ 2020-12-16 10:18 ` Guennadi Liakhovetski
2020-12-16 14:12 ` Rob Herring
0 siblings, 1 reply; 21+ messages in thread
From: Guennadi Liakhovetski @ 2020-12-16 10:18 UTC (permalink / raw)
To: Rob Herring
Cc: Sakari Ailus, Maxime Ripard, Mauro Carvalho Chehab, Jacopo Mondi,
Laurent Pinchart, devicetree, linux-kernel, linux-media
Hi Rob,
Sorry for the delay! I didn't realise my ack was required for this patch.
I won't object against the licence change, but please don't add me as a
maintainer of
On Thu, 10 Dec 2020, Rob Herring wrote:
[snip]
> diff --git a/Documentation/devicetree/bindings/media/video-interfaces.yaml b/Documentation/devicetree/bindings/media/video-interfaces.yaml
> new file mode 100644
> index 000000000000..7415a4df1576
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/video-interfaces.yaml
> @@ -0,0 +1,344 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/video-interfaces.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Common bindings for video receiver and transmitter interface endpoints
> +
> +maintainers:
> + - Guennadi Liakhovetski <g.liakhovetski@gmx.de>
I did commit the original version of
Documentation/devicetree/bindings/media/video-interfaces.txt but that was
more than 8 years ago, I haven't worked in media / V4L for several years
now, so, I don't think I can meaningfully maintain that file now.
Thanks
Guennadi
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 1/2] media: dt-bindings: Convert video-interfaces.txt properties to schemas
2020-12-16 10:18 ` Guennadi Liakhovetski
@ 2020-12-16 14:12 ` Rob Herring
2020-12-16 14:24 ` Laurent Pinchart
2020-12-16 15:06 ` Guennadi Liakhovetski
0 siblings, 2 replies; 21+ messages in thread
From: Rob Herring @ 2020-12-16 14:12 UTC (permalink / raw)
To: Guennadi Liakhovetski
Cc: Sakari Ailus, Maxime Ripard, Mauro Carvalho Chehab, Jacopo Mondi,
Laurent Pinchart, devicetree, linux-kernel, linux-media
On Wed, Dec 16, 2020 at 11:18:03AM +0100, Guennadi Liakhovetski wrote:
> Hi Rob,
>
> Sorry for the delay! I didn't realise my ack was required for this patch.
> I won't object against the licence change, but please don't add me as a
> maintainer of
Okay, so that's an Ack?
>
> On Thu, 10 Dec 2020, Rob Herring wrote:
>
> [snip]
>
> > diff --git a/Documentation/devicetree/bindings/media/video-interfaces.yaml b/Documentation/devicetree/bindings/media/video-interfaces.yaml
> > new file mode 100644
> > index 000000000000..7415a4df1576
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/video-interfaces.yaml
> > @@ -0,0 +1,344 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/video-interfaces.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Common bindings for video receiver and transmitter interface endpoints
> > +
> > +maintainers:
> > + - Guennadi Liakhovetski <g.liakhovetski@gmx.de>
>
> I did commit the original version of
> Documentation/devicetree/bindings/media/video-interfaces.txt but that was
> more than 8 years ago, I haven't worked in media / V4L for several years
> now, so, I don't think I can meaningfully maintain that file now.
Okay, I'll drop you.
Anyone else want to sign up? Laurent?
Rob
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v3 0/2] dt-bindings: media: Convert video-interfaces.txt to schemas
2020-12-10 21:16 ` [PATCH v3 0/2] dt-bindings: media: Convert video-interfaces.txt to schemas Rob Herring
@ 2020-12-16 14:22 ` Hans Verkuil
0 siblings, 0 replies; 21+ messages in thread
From: Hans Verkuil @ 2020-12-16 14:22 UTC (permalink / raw)
To: Rob Herring, Guennadi Liakhovetski, Sakari Ailus, Maxime Ripard,
Mauro Carvalho Chehab, Jacopo Mondi, Laurent Pinchart,
Guennadi Liakhovetski
Cc: devicetree, linux-kernel, linux-media
Hi Rob,
You can add my
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
to these two patches.
Regards,
Hans
On 10/12/2020 22:16, Rob Herring wrote:
> This series converts video-interfaces.txt to DT schema which in turn is
> based on converting the graph binding to a schema. All the media users
> are converted to use the graph and video-interfaces schemas.
>
> Based on media tree commit 7ea4d2329330. This is dependent on dt-schema
> changes not yet committed[1]. Please review those too.
>
> Rob
>
> [1] https://github.com/devicetree-org/dt-schema/tree/of-graph
>
>
> Rob Herring (2):
> media: dt-bindings: Convert video-interfaces.txt properties to schemas
> dt-bindings: media: Use graph and video-interfaces schemas
>
> .../media/allwinner,sun4i-a10-csi.yaml | 11 +-
> .../media/allwinner,sun6i-a31-csi.yaml | 12 +-
> .../bindings/media/i2c/adv7180.yaml | 36 +-
> .../bindings/media/i2c/adv7604.yaml | 37 +-
> .../bindings/media/i2c/aptina,mt9v111.yaml | 4 +-
> .../bindings/media/i2c/imi,rdacm2x-gmsl.yaml | 30 +-
> .../devicetree/bindings/media/i2c/imx219.yaml | 21 +-
> .../bindings/media/i2c/maxim,max9286.yaml | 101 +--
> .../bindings/media/i2c/mipi-ccs.yaml | 15 +-
> .../devicetree/bindings/media/i2c/ov5647.yaml | 20 +-
> .../devicetree/bindings/media/i2c/ov8856.yaml | 21 +-
> .../bindings/media/i2c/ovti,ov02a10.yaml | 30 +-
> .../bindings/media/i2c/ovti,ov2680.yaml | 6 +-
> .../bindings/media/i2c/ovti,ov772x.yaml | 9 +-
> .../bindings/media/i2c/sony,imx214.yaml | 25 +-
> .../bindings/media/i2c/sony,imx274.yaml | 3 +-
> .../bindings/media/marvell,mmp2-ccic.yaml | 15 +-
> .../bindings/media/nxp,imx7-csi.yaml | 5 +-
> .../bindings/media/nxp,imx7-mipi-csi2.yaml | 32 +-
> .../bindings/media/renesas,ceu.yaml | 17 +-
> .../bindings/media/renesas,csi2.yaml | 54 +-
> .../bindings/media/renesas,vin.yaml | 113 +---
> .../bindings/media/rockchip-isp1.yaml | 40 +-
> .../bindings/media/st,stm32-dcmi.yaml | 18 +-
> .../devicetree/bindings/media/ti,cal.yaml | 55 +-
> .../media/video-interface-devices.yaml | 406 +++++++++++
> .../bindings/media/video-interfaces.txt | 640 +-----------------
> .../bindings/media/video-interfaces.yaml | 346 ++++++++++
> .../bindings/media/xilinx/xlnx,csi2rxss.yaml | 39 +-
> 29 files changed, 922 insertions(+), 1239 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/media/video-interface-devices.yaml
> create mode 100644 Documentation/devicetree/bindings/media/video-interfaces.yaml
>
> --
> 2.25.1
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 1/2] media: dt-bindings: Convert video-interfaces.txt properties to schemas
2020-12-16 14:12 ` Rob Herring
@ 2020-12-16 14:24 ` Laurent Pinchart
2020-12-16 15:03 ` Sakari Ailus
2020-12-16 15:06 ` Guennadi Liakhovetski
1 sibling, 1 reply; 21+ messages in thread
From: Laurent Pinchart @ 2020-12-16 14:24 UTC (permalink / raw)
To: Rob Herring
Cc: Guennadi Liakhovetski, Sakari Ailus, Maxime Ripard,
Mauro Carvalho Chehab, Jacopo Mondi, Laurent Pinchart,
devicetree, linux-kernel, linux-media
Hi Rob,
On Wed, Dec 16, 2020 at 08:12:10AM -0600, Rob Herring wrote:
> On Wed, Dec 16, 2020 at 11:18:03AM +0100, Guennadi Liakhovetski wrote:
> > Hi Rob,
> >
> > Sorry for the delay! I didn't realise my ack was required for this patch.
> > I won't object against the licence change, but please don't add me as a
> > maintainer of
>
> Okay, so that's an Ack?
>
> >
> > On Thu, 10 Dec 2020, Rob Herring wrote:
> >
> > [snip]
> >
> > > diff --git a/Documentation/devicetree/bindings/media/video-interfaces.yaml b/Documentation/devicetree/bindings/media/video-interfaces.yaml
> > > new file mode 100644
> > > index 000000000000..7415a4df1576
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/media/video-interfaces.yaml
> > > @@ -0,0 +1,344 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/media/video-interfaces.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Common bindings for video receiver and transmitter interface endpoints
> > > +
> > > +maintainers:
> > > + - Guennadi Liakhovetski <g.liakhovetski@gmx.de>
> >
> > I did commit the original version of
> > Documentation/devicetree/bindings/media/video-interfaces.txt but that was
> > more than 8 years ago, I haven't worked in media / V4L for several years
> > now, so, I don't think I can meaningfully maintain that file now.
>
> Okay, I'll drop you.
>
> Anyone else want to sign up? Laurent?
I'll likely regret this, but yes, you can sign me up :-)
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v3 1/2] media: dt-bindings: Convert video-interfaces.txt properties to schemas
2020-12-10 21:16 ` [PATCH v3 1/2] media: dt-bindings: Convert video-interfaces.txt properties " Rob Herring
@ 2020-12-16 14:52 ` Laurent Pinchart
2020-12-16 21:58 ` Sakari Ailus
2020-12-18 18:19 ` Rob Herring
0 siblings, 2 replies; 21+ messages in thread
From: Laurent Pinchart @ 2020-12-16 14:52 UTC (permalink / raw)
To: Rob Herring
Cc: Guennadi Liakhovetski, Sakari Ailus, Maxime Ripard,
Mauro Carvalho Chehab, Jacopo Mondi, Laurent Pinchart,
devicetree, linux-kernel, linux-media
Hi Rob,
Thank you for the patch.
On Thu, Dec 10, 2020 at 03:16:24PM -0600, Rob Herring wrote:
> Convert video-interfaces.txt to DT schema. As it contains a mixture of
> device level and endpoint properties, split it up into 2 schemas.
>
> Binding schemas will need to reference both the graph.yaml and
> video-interfaces.yaml schemas. The exact schema depends on how many
> ports and endpoints for the binding. A single port with a single
> endpoint looks similar to this:
>
> port:
> $ref: /schemas/graph.yaml#/$defs/port-base
>
> properties:
> endpoint:
> $ref: video-interfaces.yaml#
> unevaluatedProperties: false
>
> properties:
> bus-width:
> enum: [ 8, 10, 12, 16 ]
>
> pclk-sample: true
> hsync-active: true
> vsync-active: true
>
> required:
> - bus-width
>
> additionalProperties: false
>
> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> Acked-by: Jacopo Mondi <jacopo@jmondi.org>
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> I need acks for dual licensing from the listed maintainers.
>
> v3:
> - Support up to 9 physical lanes
> - Set lane-polarities array bounds
> ---
> .../media/video-interface-devices.yaml | 406 +++++++++++
> .../bindings/media/video-interfaces.txt | 640 +-----------------
> .../bindings/media/video-interfaces.yaml | 346 ++++++++++
> 3 files changed, 753 insertions(+), 639 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/media/video-interface-devices.yaml
> create mode 100644 Documentation/devicetree/bindings/media/video-interfaces.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/video-interface-devices.yaml b/Documentation/devicetree/bindings/media/video-interface-devices.yaml
> new file mode 100644
> index 000000000000..4527f56a5a6e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/video-interface-devices.yaml
> @@ -0,0 +1,406 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/video-interface-devices.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Common bindings for video receiver and transmitter devices
> +
> +maintainers:
> + - Jacopo Mondi <jacopo@jmondi.org>
> + - Sakari Ailus <sakari.ailus@linux.intel.com>
> +
> +properties:
> + flash-leds:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description:
> + An array of phandles, each referring to a flash LED, a sub-node of the LED
> + driver device node.
> +
> + lens-focus:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + A phandle to the node of the focus lens controller.
> +
> + rotation:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [ 0, 90, 180, 270 ]
> + description: |
> + The camera rotation is expressed as the angular difference in degrees
> + between two reference systems, one relative to the camera module, and one
> + defined on the external world scene to be captured when projected on the
> + image sensor pixel array.
> +
> + A camera sensor has a 2-dimensional reference system 'Rc' defined by its
> + pixel array read-out order. The origin is set to the first pixel being
> + read out, the X-axis points along the column read-out direction towards
> + the last columns, and the Y-axis along the row read-out direction towards
> + the last row.
> +
> + A typical example for a sensor with a 2592x1944 pixel array matrix
> + observed from the front is:
> +
> + 2591 X-axis 0
> + <------------------------+ 0
> + .......... ... ..........!
> + .......... ... ..........! Y-axis
> + ... !
> + .......... ... ..........!
> + .......... ... ..........! 1943
> + V
> +
> + The external world scene reference system 'Rs' is a 2-dimensional
> + reference system on the focal plane of the camera module. The origin is
> + placed on the top-left corner of the visible scene, the X-axis points
> + towards the right, and the Y-axis points towards the bottom of the scene.
> + The top, bottom, left and right directions are intentionally not defined
> + and depend on the environment in which the camera is used.
> +
> + A typical example of a (very common) picture of a shark swimming from left
> + to right, as seen from the camera, is:
> +
> + 0 X-axis
> + 0 +------------------------------------->
> + !
> + !
> + !
> + ! |\____)\___
> + ! ) _____ __`<
> + ! |/ )/
> + !
> + !
> + !
> + V
> + Y-axis
> +
> + with the reference system 'Rs' placed on the camera focal plane:
> +
> + ¸.·˙!
> + ¸.·˙ !
> + _ ¸.·˙ !
> + +-/ \-+¸.·˙ !
> + | (o) | ! Camera focal plane
> + +-----+˙·.¸ !
> + ˙·.¸ !
> + ˙·.¸ !
> + ˙·.¸!
> +
> + When projected on the sensor's pixel array, the image and the associated
> + reference system 'Rs' are typically (but not always) inverted, due to the
> + camera module's lens optical inversion effect.
> +
> + Assuming the above represented scene of the swimming shark, the lens
> + inversion projects the scene and its reference system onto the sensor
> + pixel array, seen from the front of the camera sensor, as follows:
> +
> + Y-axis
> + ^
> + !
> + !
> + !
> + ! |\_____)\__
> + ! ) ____ ___.<
> + ! |/ )/
> + !
> + !
> + !
> + 0 +------------------------------------->
> + 0 X-axis
> +
> + Note the shark being upside-down.
> +
> + The resulting projected reference system is named 'Rp'.
> +
> + The camera rotation property is then defined as the angular difference in
> + the counter-clockwise direction between the camera reference system 'Rc'
> + and the projected scene reference system 'Rp'. It is expressed in degrees
> + as a number in the range [0, 360[.
> +
> + Examples
> +
> + 0 degrees camera rotation:
> +
> +
> + Y-Rp
> + ^
> + Y-Rc !
> + ^ !
> + ! !
> + ! !
> + ! !
> + ! !
> + ! !
> + ! !
> + ! !
> + ! 0 +------------------------------------->
> + ! 0 X-Rp
> + 0 +------------------------------------->
> + 0 X-Rc
> +
> +
> + X-Rc 0
> + <------------------------------------+ 0
> + X-Rp 0 !
> + <------------------------------------+ 0 !
> + ! !
> + ! !
> + ! !
> + ! !
> + ! !
> + ! !
> + ! !
> + ! V
> + ! Y-Rc
> + V
> + Y-Rp
> +
> + 90 degrees camera rotation:
> +
> + 0 Y-Rc
> + 0 +-------------------->
> + ! Y-Rp
> + ! ^
> + ! !
> + ! !
> + ! !
> + ! !
> + ! !
> + ! !
> + ! !
> + ! !
> + ! !
> + ! 0 +------------------------------------->
> + ! 0 X-Rp
> + !
> + !
> + !
> + !
> + V
> + X-Rc
> +
> + 180 degrees camera rotation:
> +
> + 0
> + <------------------------------------+ 0
> + X-Rc !
> + Y-Rp !
> + ^ !
> + ! !
> + ! !
> + ! !
> + ! !
> + ! !
> + ! !
> + ! V
> + ! Y-Rc
> + 0 +------------------------------------->
> + 0 X-Rp
> +
> + 270 degrees camera rotation:
> +
> + 0 Y-Rc
> + 0 +-------------------->
> + ! 0
> + ! <-----------------------------------+ 0
> + ! X-Rp !
> + ! !
> + ! !
> + ! !
> + ! !
> + ! !
> + ! !
> + ! !
> + ! !
> + ! V
> + ! Y-Rp
> + !
> + !
> + !
> + !
> + V
> + X-Rc
> +
> +
> + Example one - Webcam
> +
> + A camera module installed on the user facing part of a laptop screen
> + casing used for video calls. The captured images are meant to be displayed
> + in landscape mode (width > height) on the laptop screen.
> +
> + The camera is typically mounted upside-down to compensate the lens optical
> + inversion effect:
> +
> + Y-Rp
> + Y-Rc ^
> + ^ !
> + ! !
> + ! ! |\_____)\__
> + ! ! ) ____ ___.<
> + ! ! |/ )/
> + ! !
> + ! !
> + ! !
> + ! 0 +------------------------------------->
> + ! 0 X-Rp
> + 0 +------------------------------------->
> + 0 X-Rc
> +
> + The two reference systems are aligned, the resulting camera rotation is
> + 0 degrees, no rotation correction needs to be applied to the resulting
> + image once captured to memory buffers to correctly display it to users:
> +
> + +--------------------------------------+
> + ! !
> + ! !
> + ! !
> + ! |\____)\___ !
> + ! ) _____ __`< !
> + ! |/ )/ !
> + ! !
> + ! !
> + ! !
> + +--------------------------------------+
> +
> + If the camera sensor is not mounted upside-down to compensate for the lens
> + optical inversion, the two reference systems will not be aligned, with
> + 'Rp' being rotated 180 degrees relatively to 'Rc':
> +
> +
> + X-Rc 0
> + <------------------------------------+ 0
> + !
> + Y-Rp !
> + ^ !
> + ! !
> + ! |\_____)\__ !
> + ! ) ____ ___.< !
> + ! |/ )/ !
> + ! !
> + ! !
> + ! V
> + ! Y-Rc
> + 0 +------------------------------------->
> + 0 X-Rp
> +
> + The image once captured to memory will then be rotated by 180 degrees:
> +
> + +--------------------------------------+
> + ! !
> + ! !
> + ! !
> + ! __/(_____/| !
> + ! >.___ ____ ( !
> + ! \( \| !
> + ! !
> + ! !
> + ! !
> + +--------------------------------------+
> +
> + A software rotation correction of 180 degrees should be applied to
> + correctly display the image:
> +
> + +--------------------------------------+
> + ! !
> + ! !
> + ! !
> + ! |\____)\___ !
> + ! ) _____ __`< !
> + ! |/ )/ !
> + ! !
> + ! !
> + ! !
> + +--------------------------------------+
> +
> + Example two - Phone camera
> +
> + A camera installed on the back side of a mobile device facing away from
> + the user. The captured images are meant to be displayed in portrait mode
> + (height > width) to match the device screen orientation and the device
> + usage orientation used when taking the picture.
> +
> + The camera sensor is typically mounted with its pixel array longer side
> + aligned to the device longer side, upside-down mounted to compensate for
> + the lens optical inversion effect:
> +
> + 0 Y-Rc
> + 0 +-------------------->
> + ! Y-Rp
> + ! ^
> + ! !
> + ! !
> + ! !
> + ! ! |\_____)\__
> + ! ! ) ____ ___.<
> + ! ! |/ )/
> + ! !
> + ! !
> + ! !
> + ! 0 +------------------------------------->
> + ! 0 X-Rp
> + !
> + !
> + !
> + !
> + V
> + X-Rc
> +
> + The two reference systems are not aligned and the 'Rp' reference system is
> + rotated by 90 degrees in the counter-clockwise direction relatively to the
> + 'Rc' reference system.
> +
> + The image once captured to memory will be rotated:
> +
> + +-------------------------------------+
> + | _ _ |
> + | \ / |
> + | | | |
> + | | | |
> + | | > |
> + | < | |
> + | | | |
> + | . |
> + | V |
> + +-------------------------------------+
> +
> + A correction of 90 degrees in counter-clockwise direction has to be
> + applied to correctly display the image in portrait mode on the device
> + screen:
> +
> + +--------------------+
> + | |
> + | |
> + | |
> + | |
> + | |
> + | |
> + | |\____)\___ |
> + | ) _____ __`< |
> + | |/ )/ |
> + | |
> + | |
> + | |
> + | |
> + | |
> + +--------------------+
> +
> + orientation:
> + description:
> + The orientation of a device (typically an image sensor or a flash LED)
> + describing its mounting position relative to the usage orientation of the
> + system where the device is installed on.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum:
> + # Front. The device is mounted on the front facing side of the system. For
> + # mobile devices such as smartphones, tablets and laptops the front side
> + # is the user facing side.
> + - 0
> + # Back. The device is mounted on the back side of the system, which is
> + # defined as the opposite side of the front facing one.
> + - 1
> + # External. The device is not attached directly to the system but is
> + # attached in a way that allows it to move freely.
> + - 2
> +
> +additionalProperties: true
> +
> +...
> diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt
> index 3920f25a9123..8fcf5f52bf5b 100644
> --- a/Documentation/devicetree/bindings/media/video-interfaces.txt
> +++ b/Documentation/devicetree/bindings/media/video-interfaces.txt
> @@ -1,639 +1 @@
> -Common bindings for video receiver and transmitter interfaces
> -
> -General concept
> ----------------
> -
> -Video data pipelines usually consist of external devices, e.g. camera sensors,
> -controlled over an I2C, SPI or UART bus, and SoC internal IP blocks, including
> -video DMA engines and video data processors.
> -
> -SoC internal blocks are described by DT nodes, placed similarly to other SoC
> -blocks. External devices are represented as child nodes of their respective
> -bus controller nodes, e.g. I2C.
> -
> -Data interfaces on all video devices are described by their child 'port' nodes.
> -Configuration of a port depends on other devices participating in the data
> -transfer and is described by 'endpoint' subnodes.
> -
> -device {
> - ...
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - port@0 {
> - ...
> - endpoint@0 { ... };
> - endpoint@1 { ... };
> - };
> - port@1 { ... };
> - };
> -};
> -
> -If a port can be configured to work with more than one remote device on the same
> -bus, an 'endpoint' child node must be provided for each of them. If more than
> -one port is present in a device node or there is more than one endpoint at a
> -port, or port node needs to be associated with a selected hardware interface,
> -a common scheme using '#address-cells', '#size-cells' and 'reg' properties is
> -used.
> -
> -All 'port' nodes can be grouped under optional 'ports' node, which allows to
> -specify #address-cells, #size-cells properties independently for the 'port'
> -and 'endpoint' nodes and any child device nodes a device might have.
> -
> -Two 'endpoint' nodes are linked with each other through their 'remote-endpoint'
> -phandles. An endpoint subnode of a device contains all properties needed for
> -configuration of this device for data exchange with other device. In most
> -cases properties at the peer 'endpoint' nodes will be identical, however they
> -might need to be different when there is any signal modifications on the bus
> -between two devices, e.g. there are logic signal inverters on the lines.
> -
> -It is allowed for multiple endpoints at a port to be active simultaneously,
> -where supported by a device. For example, in case where a data interface of
> -a device is partitioned into multiple data busses, e.g. 16-bit input port
> -divided into two separate ITU-R BT.656 8-bit busses. In such case bus-width
> -and data-shift properties can be used to assign physical data lines to each
> -endpoint node (logical bus).
> -
> -Documenting bindings for devices
> ---------------------------------
> -
> -All required and optional bindings the device supports shall be explicitly
> -documented in device DT binding documentation. This also includes port and
> -endpoint nodes for the device, including unit-addresses and reg properties where
> -relevant.
> -
> -Please also see Documentation/devicetree/bindings/graph.txt .
> -
> -Required properties
> --------------------
> -
> -If there is more than one 'port' or more than one 'endpoint' node or 'reg'
> -property is present in port and/or endpoint nodes the following properties
> -are required in a relevant parent node:
> -
> - - #address-cells : number of cells required to define port/endpoint
> - identifier, should be 1.
> - - #size-cells : should be zero.
> -
> -
> -Optional properties
> --------------------
> -
> -- flash-leds: An array of phandles, each referring to a flash LED, a sub-node
> - of the LED driver device node.
> -
> -- lens-focus: A phandle to the node of the focus lens controller.
> -
> -- rotation: The camera rotation is expressed as the angular difference in
> - degrees between two reference systems, one relative to the camera module, and
> - one defined on the external world scene to be captured when projected on the
> - image sensor pixel array.
> -
> - A camera sensor has a 2-dimensional reference system 'Rc' defined by
> - its pixel array read-out order. The origin is set to the first pixel
> - being read out, the X-axis points along the column read-out direction
> - towards the last columns, and the Y-axis along the row read-out
> - direction towards the last row.
> -
> - A typical example for a sensor with a 2592x1944 pixel array matrix
> - observed from the front is:
> -
> - 2591 X-axis 0
> - <------------------------+ 0
> - .......... ... ..........!
> - .......... ... ..........! Y-axis
> - ... !
> - .......... ... ..........!
> - .......... ... ..........! 1943
> - V
> -
> - The external world scene reference system 'Rs' is a 2-dimensional
> - reference system on the focal plane of the camera module. The origin is
> - placed on the top-left corner of the visible scene, the X-axis points
> - towards the right, and the Y-axis points towards the bottom of the
> - scene. The top, bottom, left and right directions are intentionally not
> - defined and depend on the environment in which the camera is used.
> -
> - A typical example of a (very common) picture of a shark swimming from
> - left to right, as seen from the camera, is:
> -
> - 0 X-axis
> - 0 +------------------------------------->
> - !
> - !
> - !
> - ! |\____)\___
> - ! ) _____ __`<
> - ! |/ )/
> - !
> - !
> - !
> - V
> - Y-axis
> -
> - with the reference system 'Rs' placed on the camera focal plane:
> -
> - ¸.·˙!
> - ¸.·˙ !
> - _ ¸.·˙ !
> - +-/ \-+¸.·˙ !
> - | (o) | ! Camera focal plane
> - +-----+˙·.¸ !
> - ˙·.¸ !
> - ˙·.¸ !
> - ˙·.¸!
> -
> - When projected on the sensor's pixel array, the image and the associated
> - reference system 'Rs' are typically (but not always) inverted, due to
> - the camera module's lens optical inversion effect.
> -
> - Assuming the above represented scene of the swimming shark, the lens
> - inversion projects the scene and its reference system onto the sensor
> - pixel array, seen from the front of the camera sensor, as follows:
> -
> - Y-axis
> - ^
> - !
> - !
> - !
> - ! |\_____)\__
> - ! ) ____ ___.<
> - ! |/ )/
> - !
> - !
> - !
> - 0 +------------------------------------->
> - 0 X-axis
> -
> - Note the shark being upside-down.
> -
> - The resulting projected reference system is named 'Rp'.
> -
> - The camera rotation property is then defined as the angular difference
> - in the counter-clockwise direction between the camera reference system
> - 'Rc' and the projected scene reference system 'Rp'. It is expressed in
> - degrees as a number in the range [0, 360[.
> -
> - Examples
> -
> - 0 degrees camera rotation:
> -
> -
> - Y-Rp
> - ^
> - Y-Rc !
> - ^ !
> - ! !
> - ! !
> - ! !
> - ! !
> - ! !
> - ! !
> - ! !
> - ! 0 +------------------------------------->
> - ! 0 X-Rp
> - 0 +------------------------------------->
> - 0 X-Rc
> -
> -
> - X-Rc 0
> - <------------------------------------+ 0
> - X-Rp 0 !
> - <------------------------------------+ 0 !
> - ! !
> - ! !
> - ! !
> - ! !
> - ! !
> - ! !
> - ! !
> - ! V
> - ! Y-Rc
> - V
> - Y-Rp
> -
> - 90 degrees camera rotation:
> -
> - 0 Y-Rc
> - 0 +-------------------->
> - ! Y-Rp
> - ! ^
> - ! !
> - ! !
> - ! !
> - ! !
> - ! !
> - ! !
> - ! !
> - ! !
> - ! !
> - ! 0 +------------------------------------->
> - ! 0 X-Rp
> - !
> - !
> - !
> - !
> - V
> - X-Rc
> -
> - 180 degrees camera rotation:
> -
> - 0
> - <------------------------------------+ 0
> - X-Rc !
> - Y-Rp !
> - ^ !
> - ! !
> - ! !
> - ! !
> - ! !
> - ! !
> - ! !
> - ! V
> - ! Y-Rc
> - 0 +------------------------------------->
> - 0 X-Rp
> -
> - 270 degrees camera rotation:
> -
> - 0 Y-Rc
> - 0 +-------------------->
> - ! 0
> - ! <-----------------------------------+ 0
> - ! X-Rp !
> - ! !
> - ! !
> - ! !
> - ! !
> - ! !
> - ! !
> - ! !
> - ! !
> - ! V
> - ! Y-Rp
> - !
> - !
> - !
> - !
> - V
> - X-Rc
> -
> -
> - Example one - Webcam
> -
> - A camera module installed on the user facing part of a laptop screen
> - casing used for video calls. The captured images are meant to be
> - displayed in landscape mode (width > height) on the laptop screen.
> -
> - The camera is typically mounted upside-down to compensate the lens
> - optical inversion effect:
> -
> - Y-Rp
> - Y-Rc ^
> - ^ !
> - ! !
> - ! ! |\_____)\__
> - ! ! ) ____ ___.<
> - ! ! |/ )/
> - ! !
> - ! !
> - ! !
> - ! 0 +------------------------------------->
> - ! 0 X-Rp
> - 0 +------------------------------------->
> - 0 X-Rc
> -
> - The two reference systems are aligned, the resulting camera rotation is
> - 0 degrees, no rotation correction needs to be applied to the resulting
> - image once captured to memory buffers to correctly display it to users:
> -
> - +--------------------------------------+
> - ! !
> - ! !
> - ! !
> - ! |\____)\___ !
> - ! ) _____ __`< !
> - ! |/ )/ !
> - ! !
> - ! !
> - ! !
> - +--------------------------------------+
> -
> - If the camera sensor is not mounted upside-down to compensate for the
> - lens optical inversion, the two reference systems will not be aligned,
> - with 'Rp' being rotated 180 degrees relatively to 'Rc':
> -
> -
> - X-Rc 0
> - <------------------------------------+ 0
> - !
> - Y-Rp !
> - ^ !
> - ! !
> - ! |\_____)\__ !
> - ! ) ____ ___.< !
> - ! |/ )/ !
> - ! !
> - ! !
> - ! V
> - ! Y-Rc
> - 0 +------------------------------------->
> - 0 X-Rp
> -
> - The image once captured to memory will then be rotated by 180 degrees:
> -
> - +--------------------------------------+
> - ! !
> - ! !
> - ! !
> - ! __/(_____/| !
> - ! >.___ ____ ( !
> - ! \( \| !
> - ! !
> - ! !
> - ! !
> - +--------------------------------------+
> -
> - A software rotation correction of 180 degrees should be applied to
> - correctly display the image:
> -
> - +--------------------------------------+
> - ! !
> - ! !
> - ! !
> - ! |\____)\___ !
> - ! ) _____ __`< !
> - ! |/ )/ !
> - ! !
> - ! !
> - ! !
> - +--------------------------------------+
> -
> - Example two - Phone camera
> -
> - A camera installed on the back side of a mobile device facing away from
> - the user. The captured images are meant to be displayed in portrait mode
> - (height > width) to match the device screen orientation and the device
> - usage orientation used when taking the picture.
> -
> - The camera sensor is typically mounted with its pixel array longer side
> - aligned to the device longer side, upside-down mounted to compensate for
> - the lens optical inversion effect:
> -
> - 0 Y-Rc
> - 0 +-------------------->
> - ! Y-Rp
> - ! ^
> - ! !
> - ! !
> - ! !
> - ! ! |\_____)\__
> - ! ! ) ____ ___.<
> - ! ! |/ )/
> - ! !
> - ! !
> - ! !
> - ! 0 +------------------------------------->
> - ! 0 X-Rp
> - !
> - !
> - !
> - !
> - V
> - X-Rc
> -
> - The two reference systems are not aligned and the 'Rp' reference
> - system is rotated by 90 degrees in the counter-clockwise direction
> - relatively to the 'Rc' reference system.
> -
> - The image once captured to memory will be rotated:
> -
> - +-------------------------------------+
> - | _ _ |
> - | \ / |
> - | | | |
> - | | | |
> - | | > |
> - | < | |
> - | | | |
> - | . |
> - | V |
> - +-------------------------------------+
> -
> - A correction of 90 degrees in counter-clockwise direction has to be
> - applied to correctly display the image in portrait mode on the device
> - screen:
> -
> - +--------------------+
> - | |
> - | |
> - | |
> - | |
> - | |
> - | |
> - | |\____)\___ |
> - | ) _____ __`< |
> - | |/ )/ |
> - | |
> - | |
> - | |
> - | |
> - | |
> - +--------------------+
> -
> -- orientation: The orientation of a device (typically an image sensor or a flash
> - LED) describing its mounting position relative to the usage orientation of the
> - system where the device is installed on.
> - Possible values are:
> - 0 - Front. The device is mounted on the front facing side of the system.
> - For mobile devices such as smartphones, tablets and laptops the front side is
> - the user facing side.
> - 1 - Back. The device is mounted on the back side of the system, which is
> - defined as the opposite side of the front facing one.
> - 2 - External. The device is not attached directly to the system but is
> - attached in a way that allows it to move freely.
> -
> -Optional endpoint properties
> -----------------------------
> -
> -- remote-endpoint: phandle to an 'endpoint' subnode of a remote device node.
> -- slave-mode: a boolean property indicating that the link is run in slave mode.
> - The default when this property is not specified is master mode. In the slave
> - mode horizontal and vertical synchronization signals are provided to the
> - slave device (data source) by the master device (data sink). In the master
> - mode the data source device is also the source of the synchronization signals.
> -- bus-type: data bus type. Possible values are:
> - 1 - MIPI CSI-2 C-PHY
> - 2 - MIPI CSI1
> - 3 - CCP2
> - 4 - MIPI CSI-2 D-PHY
> - 5 - Parallel
> - 6 - Bt.656
> -- bus-width: number of data lines actively used, valid for the parallel busses.
> -- data-shift: on the parallel data busses, if bus-width is used to specify the
> - number of data lines, data-shift can be used to specify which data lines are
> - used, e.g. "bus-width=<8>; data-shift=<2>;" means, that lines 9:2 are used.
> -- hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
> -- vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively.
> - Note, that if HSYNC and VSYNC polarities are not specified, embedded
> - synchronization may be required, where supported.
> -- data-active: similar to HSYNC and VSYNC, specifies data line polarity.
> -- data-enable-active: similar to HSYNC and VSYNC, specifies the data enable
> - signal polarity.
> -- field-even-active: field signal level during the even field data transmission.
> -- pclk-sample: sample data on rising (1) or falling (0) edge of the pixel clock
> - signal.
> -- sync-on-green-active: active state of Sync-on-green (SoG) signal, 0/1 for
> - LOW/HIGH respectively.
> -- data-lanes: an array of physical data lane indexes. Position of an entry
> - determines the logical lane number, while the value of an entry indicates
> - physical lane, e.g. for 2-lane MIPI CSI-2 bus we could have
> - "data-lanes = <1 2>;", assuming the clock lane is on hardware lane 0.
> - If the hardware does not support lane reordering, monotonically
> - incremented values shall be used from 0 or 1 onwards, depending on
> - whether or not there is also a clock lane. This property is valid for
> - serial busses only (e.g. MIPI CSI-2).
> -- clock-lanes: an array of physical clock lane indexes. Position of an entry
> - determines the logical lane number, while the value of an entry indicates
> - physical lane, e.g. for a MIPI CSI-2 bus we could have "clock-lanes = <0>;",
> - which places the clock lane on hardware lane 0. This property is valid for
> - serial busses only (e.g. MIPI CSI-2). Note that for the MIPI CSI-2 bus this
> - array contains only one entry.
> -- clock-noncontinuous: a boolean property to allow MIPI CSI-2 non-continuous
> - clock mode.
> -- link-frequencies: Allowed data bus frequencies. For MIPI CSI-2, for
> - instance, this is the actual frequency of the bus, not bits per clock per
> - lane value. An array of 64-bit unsigned integers.
> -- lane-polarities: an array of polarities of the lanes starting from the clock
> - lane and followed by the data lanes in the same order as in data-lanes.
> - Valid values are 0 (normal) and 1 (inverted). The length of the array
> - should be the combined length of data-lanes and clock-lanes properties.
> - If the lane-polarities property is omitted, the value must be interpreted
> - as 0 (normal). This property is valid for serial busses only.
> -- strobe: Whether the clock signal is used as clock (0) or strobe (1). Used
> - with CCP2, for instance.
> -
> -Example
> --------
> -
> -The example snippet below describes two data pipelines. ov772x and imx074 are
> -camera sensors with a parallel and serial (MIPI CSI-2) video bus respectively.
> -Both sensors are on the I2C control bus corresponding to the i2c0 controller
> -node. ov772x sensor is linked directly to the ceu0 video host interface.
> -imx074 is linked to ceu0 through the MIPI CSI-2 receiver (csi2). ceu0 has a
> -(single) DMA engine writing captured data to memory. ceu0 node has a single
> -'port' node which may indicate that at any time only one of the following data
> -pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
> -
> - ceu0: ceu@fe910000 {
> - compatible = "renesas,sh-mobile-ceu";
> - reg = <0xfe910000 0xa0>;
> - interrupts = <0x880>;
> -
> - mclk: master_clock {
> - compatible = "renesas,ceu-clock";
> - #clock-cells = <1>;
> - clock-frequency = <50000000>; /* Max clock frequency */
> - clock-output-names = "mclk";
> - };
> -
> - port {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - /* Parallel bus endpoint */
> - ceu0_1: endpoint@1 {
> - reg = <1>; /* Local endpoint # */
> - remote = <&ov772x_1_1>; /* Remote phandle */
> - bus-width = <8>; /* Used data lines */
> - data-shift = <2>; /* Lines 9:2 are used */
> -
> - /* If hsync-active/vsync-active are missing,
> - embedded BT.656 sync is used */
> - hsync-active = <0>; /* Active low */
> - vsync-active = <0>; /* Active low */
> - data-active = <1>; /* Active high */
> - pclk-sample = <1>; /* Rising */
> - };
> -
> - /* MIPI CSI-2 bus endpoint */
> - ceu0_0: endpoint@0 {
> - reg = <0>;
> - remote = <&csi2_2>;
> - };
> - };
> - };
> -
> - i2c0: i2c@fff20000 {
> - ...
> - ov772x_1: camera@21 {
> - compatible = "ovti,ov772x";
> - reg = <0x21>;
> - vddio-supply = <®ulator1>;
> - vddcore-supply = <®ulator2>;
> -
> - clock-frequency = <20000000>;
> - clocks = <&mclk 0>;
> - clock-names = "xclk";
> -
> - port {
> - /* With 1 endpoint per port no need for addresses. */
> - ov772x_1_1: endpoint {
> - bus-width = <8>;
> - remote-endpoint = <&ceu0_1>;
> - hsync-active = <1>;
> - vsync-active = <0>; /* Who came up with an
> - inverter here ?... */
> - data-active = <1>;
> - pclk-sample = <1>;
> - };
> - };
> - };
> -
> - imx074: camera@1a {
> - compatible = "sony,imx074";
> - reg = <0x1a>;
> - vddio-supply = <®ulator1>;
> - vddcore-supply = <®ulator2>;
> -
> - clock-frequency = <30000000>; /* Shared clock with ov772x_1 */
> - clocks = <&mclk 0>;
> - clock-names = "sysclk"; /* Assuming this is the
> - name in the datasheet */
> - port {
> - imx074_1: endpoint {
> - clock-lanes = <0>;
> - data-lanes = <1 2>;
> - remote-endpoint = <&csi2_1>;
> - };
> - };
> - };
> - };
> -
> - csi2: csi2@ffc90000 {
> - compatible = "renesas,sh-mobile-csi2";
> - reg = <0xffc90000 0x1000>;
> - interrupts = <0x17a0>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - port@1 {
> - compatible = "renesas,csi2c"; /* One of CSI2I and CSI2C. */
> - reg = <1>; /* CSI-2 PHY #1 of 2: PHY_S,
> - PHY_M has port address 0,
> - is unused. */
> - csi2_1: endpoint {
> - clock-lanes = <0>;
> - data-lanes = <2 1>;
> - remote-endpoint = <&imx074_1>;
> - };
> - };
> - port@2 {
> - reg = <2>; /* port 2: link to the CEU */
> -
> - csi2_2: endpoint {
> - remote-endpoint = <&ceu0_0>;
> - };
> - };
> - };
> +This file has moved to video-interfaces.yaml and video-interface-devices.yaml.
> diff --git a/Documentation/devicetree/bindings/media/video-interfaces.yaml b/Documentation/devicetree/bindings/media/video-interfaces.yaml
> new file mode 100644
> index 000000000000..fefca7d98718
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/video-interfaces.yaml
> @@ -0,0 +1,346 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/video-interfaces.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Common bindings for video receiver and transmitter interface endpoints
> +
> +maintainers:
> + - Guennadi Liakhovetski <g.liakhovetski@gmx.de>
> + - Sakari Ailus <sakari.ailus@linux.intel.com>
> +
> +description: |
> + Video data pipelines usually consist of external devices, e.g. camera sensors,
> + controlled over an I2C, SPI or UART bus, and SoC internal IP blocks, including
> + video DMA engines and video data processors.
> +
> + SoC internal blocks are described by DT nodes, placed similarly to other SoC
> + blocks. External devices are represented as child nodes of their respective
> + bus controller nodes, e.g. I2C.
> +
> + Data interfaces on all video devices are described by their child 'port' nodes.
> + Configuration of a port depends on other devices participating in the data
> + transfer and is described by 'endpoint' subnodes.
> +
> + device {
> + ...
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + ...
> + endpoint@0 { ... };
> + endpoint@1 { ... };
> + };
> + port@1 { ... };
> + };
> + };
> +
> + If a port can be configured to work with more than one remote device on the same
> + bus, an 'endpoint' child node must be provided for each of them. If more than
> + one port is present in a device node or there is more than one endpoint at a
> + port, or port node needs to be associated with a selected hardware interface,
> + a common scheme using '#address-cells', '#size-cells' and 'reg' properties is
> + used.
> +
> + All 'port' nodes can be grouped under optional 'ports' node, which allows to
> + specify #address-cells, #size-cells properties independently for the 'port'
> + and 'endpoint' nodes and any child device nodes a device might have.
> +
> + Two 'endpoint' nodes are linked with each other through their 'remote-endpoint'
> + phandles. An endpoint subnode of a device contains all properties needed for
> + configuration of this device for data exchange with other device. In most
> + cases properties at the peer 'endpoint' nodes will be identical, however they
> + might need to be different when there is any signal modifications on the bus
> + between two devices, e.g. there are logic signal inverters on the lines.
> +
> + It is allowed for multiple endpoints at a port to be active simultaneously,
> + where supported by a device. For example, in case where a data interface of
> + a device is partitioned into multiple data busses, e.g. 16-bit input port
> + divided into two separate ITU-R BT.656 8-bit busses. In such case bus-width
> + and data-shift properties can be used to assign physical data lines to each
> + endpoint node (logical bus).
> +
> + Documenting bindings for devices
> + --------------------------------
> +
> + All required and optional bindings the device supports shall be explicitly
> + documented in device DT binding documentation. This also includes port and
> + endpoint nodes for the device, including unit-addresses and reg properties
> + where relevant.
> +
> + Please also see Documentation/devicetree/bindings/graph.txt .
Should this be dropped, or modified to reference the YAML schema for OF
graph ?
> +
> +allOf:
> + - $ref: /schemas/graph.yaml#/$defs/endpoint-base
> +
> +properties:
> + slave-mode:
> + type: boolean
> + description:
> + Indicates that the link is run in slave mode. The default when this
> + property is not specified is master mode. In the slave mode horizontal and
> + vertical synchronization signals are provided to the slave device (data
> + source) by the master device (data sink). In the master mode the data
> + source device is also the source of the synchronization signals.
> +
> + bus-type:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum:
> + - 1 # MIPI CSI-2 C-PHY
> + - 2 # MIPI CSI1
> + - 3 # CCP2
> + - 4 # MIPI CSI-2 D-PHY
> + - 5 # Parallel
> + - 6 # Bt.656
You could already s/Bt.656/BT.656/
> + description:
> + Data bus type.
> +
> + bus-width:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + maximum: 64
> + description:
> + Number of data lines actively used, valid for the parallel busses.
> +
> + data-shift:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + maximum: 64
> + description:
> + On the parallel data busses, if bus-width is used to specify the number of
> + data lines, data-shift can be used to specify which data lines are used,
> + e.g. "bus-width=<8>; data-shift=<2>;" means, that lines 9:2 are used.
> +
> + hsync-active:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [ 0, 1 ]
> + description:
> + Active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
> +
> + vsync-active:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [ 0, 1 ]
> + description:
> + Active state of the VSYNC signal, 0/1 for LOW/HIGH respectively. Note,
> + that if HSYNC and VSYNC polarities are not specified, embedded
> + synchronization may be required, where supported.
> +
> + data-active:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [ 0, 1 ]
> + description:
> + Similar to HSYNC and VSYNC, specifies data line polarity.
> +
> + data-enable-active:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [ 0, 1 ]
> + description:
> + Similar to HSYNC and VSYNC, specifies the data enable signal polarity.
> +
> + field-even-active:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [ 0, 1 ]
> + description:
> + Field signal level during the even field data transmission.
> +
> + pclk-sample:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [ 0, 1 ]
> + description:
> + Sample data on rising (1) or falling (0) edge of the pixel clock signal.
> +
> + sync-on-green-active:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [ 0, 1 ]
> + description:
> + Active state of Sync-on-green (SoG) signal, 0/1 for LOW/HIGH respectively.
> +
> + data-lanes:
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + minItems: 1
> + maxItems: 8
> + items:
> + # Assume up to 9 physical lane indices
> + maximum: 8
> + description:
> + An array of physical data lane indexes. Position of an entry determines
> + the logical lane number, while the value of an entry indicates physical
> + lane, e.g. for 2-lane MIPI CSI-2 bus we could have "data-lanes = <1 2>;",
> + assuming the clock lane is on hardware lane 0. If the hardware does not
> + support lane reordering, monotonically incremented values shall be used
> + from 0 or 1 onwards, depending on whether or not there is also a clock
> + lane. This property is valid for serial busses only (e.g. MIPI CSI-2).
> +
> + clock-lanes:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + # Assume up to 9 physical lane indices
> + maximum: 8
> + description:
> + Physical clock lane index. Position of an entry determines
s/index/indexes/ (or indices) as there are potentially multiple entries
(even if in practice, for all bus types we currently support, only one
clock lane is supported) ?
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> + the logical lane number, while the value of an entry indicates physical
> + lane, e.g. for a MIPI CSI-2 bus we could have "clock-lanes = <0>;", which
> + places the clock lane on hardware lane 0. This property is valid for
> + serial busses only (e.g. MIPI CSI-2).
> +
> + clock-noncontinuous:
> + type: boolean
> + description:
> + Allow MIPI CSI-2 non-continuous clock mode.
> +
> + link-frequencies:
> + $ref: /schemas/types.yaml#/definitions/uint64-array
> + description:
> + Allowed data bus frequencies. For MIPI CSI-2, for instance, this is the
> + actual frequency of the bus, not bits per clock per lane value. An array
> + of 64-bit unsigned integers.
> +
> + lane-polarities:
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + minItems: 1
> + maxItems: 9
> + items:
> + enum: [ 0, 1 ]
> + description:
> + An array of polarities of the lanes starting from the clock lane and
> + followed by the data lanes in the same order as in data-lanes. Valid
> + values are 0 (normal) and 1 (inverted). The length of the array should be
> + the combined length of data-lanes and clock-lanes properties. If the
> + lane-polarities property is omitted, the value must be interpreted as 0
> + (normal). This property is valid for serial busses only.
> +
> + strobe:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [ 0, 1 ]
> + description:
> + Whether the clock signal is used as clock (0) or strobe (1). Used with
> + CCP2, for instance.
> +
> +additionalProperties: true
> +
> +examples:
> + # The example snippet below describes two data pipelines. ov772x and imx074
> + # are camera sensors with a parallel and serial (MIPI CSI-2) video bus
> + # respectively. Both sensors are on the I2C control bus corresponding to the
> + # i2c0 controller node. ov772x sensor is linked directly to the ceu0 video
> + # host interface. imx074 is linked to ceu0 through the MIPI CSI-2 receiver
> + # (csi2). ceu0 has a (single) DMA engine writing captured data to memory.
> + # ceu0 node has a single 'port' node which may indicate that at any time
> + # only one of the following data pipelines can be active:
> + # ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
> + - |
> + ceu@fe910000 {
> + compatible = "renesas,sh-mobile-ceu";
> + reg = <0xfe910000 0xa0>;
> + interrupts = <0x880>;
> +
> + mclk: master_clock {
> + compatible = "renesas,ceu-clock";
> + #clock-cells = <1>;
> + clock-frequency = <50000000>; /* Max clock frequency */
> + clock-output-names = "mclk";
> + };
> +
> + port {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* Parallel bus endpoint */
> + ceu0_1: endpoint@1 {
> + reg = <1>; /* Local endpoint # */
> + remote-endpoint = <&ov772x_1_1>; /* Remote phandle */
> + bus-width = <8>; /* Used data lines */
> + data-shift = <2>; /* Lines 9:2 are used */
> +
> + /* If hsync-active/vsync-active are missing,
> + embedded BT.656 sync is used */
> + hsync-active = <0>; /* Active low */
> + vsync-active = <0>; /* Active low */
> + data-active = <1>; /* Active high */
> + pclk-sample = <1>; /* Rising */
> + };
> +
> + /* MIPI CSI-2 bus endpoint */
> + ceu0_0: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&csi2_2>;
> + };
> + };
> + };
> +
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + camera@21 {
> + compatible = "ovti,ov772x";
> + reg = <0x21>;
> + vddio-supply = <®ulator1>;
> + vddcore-supply = <®ulator2>;
> +
> + clock-frequency = <20000000>;
> + clocks = <&mclk 0>;
> + clock-names = "xclk";
> +
> + port {
> + /* With 1 endpoint per port no need for addresses. */
> + ov772x_1_1: endpoint {
> + bus-width = <8>;
> + remote-endpoint = <&ceu0_1>;
> + hsync-active = <1>;
> + vsync-active = <0>; /* Who came up with an
> + inverter here ?... */
> + data-active = <1>;
> + pclk-sample = <1>;
> + };
> + };
> + };
> +
> + camera@1a {
> + compatible = "sony,imx074";
> + reg = <0x1a>;
> + vddio-supply = <®ulator1>;
> + vddcore-supply = <®ulator2>;
> +
> + clock-frequency = <30000000>; /* Shared clock with ov772x_1 */
> + clocks = <&mclk 0>;
> + clock-names = "sysclk"; /* Assuming this is the
> + name in the datasheet */
> + port {
> + imx074_1: endpoint {
> + clock-lanes = <0>;
> + data-lanes = <1 2>;
> + remote-endpoint = <&csi2_1>;
> + };
> + };
> + };
> + };
> +
> + csi2: csi2@ffc90000 {
> + compatible = "renesas,sh-mobile-csi2";
> + reg = <0xffc90000 0x1000>;
> + interrupts = <0x17a0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@1 {
> + compatible = "renesas,csi2c"; /* One of CSI2I and CSI2C. */
> + reg = <1>; /* CSI-2 PHY #1 of 2: PHY_S,
> + PHY_M has port address 0,
> + is unused. */
> + csi2_1: endpoint {
> + clock-lanes = <0>;
> + data-lanes = <2 1>;
> + remote-endpoint = <&imx074_1>;
> + };
> + };
> + port@2 {
> + reg = <2>; /* port 2: link to the CEU */
> +
> + csi2_2: endpoint {
> + remote-endpoint = <&ceu0_0>;
> + };
> + };
> + };
> +
> +...
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 1/2] media: dt-bindings: Convert video-interfaces.txt properties to schemas
2020-12-16 14:24 ` Laurent Pinchart
@ 2020-12-16 15:03 ` Sakari Ailus
0 siblings, 0 replies; 21+ messages in thread
From: Sakari Ailus @ 2020-12-16 15:03 UTC (permalink / raw)
To: Laurent Pinchart
Cc: Rob Herring, Guennadi Liakhovetski, Maxime Ripard,
Mauro Carvalho Chehab, Jacopo Mondi, Laurent Pinchart,
devicetree, linux-kernel, linux-media
Hi Rob and Laurent,
On Wed, Dec 16, 2020 at 04:24:51PM +0200, Laurent Pinchart wrote:
> Hi Rob,
>
> On Wed, Dec 16, 2020 at 08:12:10AM -0600, Rob Herring wrote:
> > On Wed, Dec 16, 2020 at 11:18:03AM +0100, Guennadi Liakhovetski wrote:
> > > Hi Rob,
> > >
> > > Sorry for the delay! I didn't realise my ack was required for this patch.
> > > I won't object against the licence change, but please don't add me as a
> > > maintainer of
> >
> > Okay, so that's an Ack?
> >
> > >
> > > On Thu, 10 Dec 2020, Rob Herring wrote:
> > >
> > > [snip]
> > >
> > > > diff --git a/Documentation/devicetree/bindings/media/video-interfaces.yaml b/Documentation/devicetree/bindings/media/video-interfaces.yaml
> > > > new file mode 100644
> > > > index 000000000000..7415a4df1576
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/media/video-interfaces.yaml
> > > > @@ -0,0 +1,344 @@
> > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > > +%YAML 1.2
> > > > +---
> > > > +$id: http://devicetree.org/schemas/media/video-interfaces.yaml#
> > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > +
> > > > +title: Common bindings for video receiver and transmitter interface endpoints
> > > > +
> > > > +maintainers:
> > > > + - Guennadi Liakhovetski <g.liakhovetski@gmx.de>
> > >
> > > I did commit the original version of
> > > Documentation/devicetree/bindings/media/video-interfaces.txt but that was
> > > more than 8 years ago, I haven't worked in media / V4L for several years
> > > now, so, I don't think I can meaningfully maintain that file now.
> >
> > Okay, I'll drop you.
> >
> > Anyone else want to sign up? Laurent?
>
> I'll likely regret this, but yes, you can sign me up :-)
Please add me, too.
--
Regards,
Sakari Ailus
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v2 1/2] media: dt-bindings: Convert video-interfaces.txt properties to schemas
2020-12-16 14:12 ` Rob Herring
2020-12-16 14:24 ` Laurent Pinchart
@ 2020-12-16 15:06 ` Guennadi Liakhovetski
1 sibling, 0 replies; 21+ messages in thread
From: Guennadi Liakhovetski @ 2020-12-16 15:06 UTC (permalink / raw)
To: Rob Herring
Cc: Sakari Ailus, Maxime Ripard, Mauro Carvalho Chehab, Jacopo Mondi,
Laurent Pinchart, devicetree, linux-kernel, linux-media
On Wed, 16 Dec 2020, Rob Herring wrote:
> On Wed, Dec 16, 2020 at 11:18:03AM +0100, Guennadi Liakhovetski wrote:
> > Hi Rob,
> >
> > Sorry for the delay! I didn't realise my ack was required for this patch.
> > I won't object against the licence change, but please don't add me as a
> > maintainer of
>
> Okay, so that's an Ack?
A conditional one, yes. You'll have to send a new version of this your
patch without me among maintainers, to that version you can add
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Thanks
Guennadi
> > On Thu, 10 Dec 2020, Rob Herring wrote:
> >
> > [snip]
> >
> > > diff --git a/Documentation/devicetree/bindings/media/video-interfaces.yaml b/Documentation/devicetree/bindings/media/video-interfaces.yaml
> > > new file mode 100644
> > > index 000000000000..7415a4df1576
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/media/video-interfaces.yaml
> > > @@ -0,0 +1,344 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/media/video-interfaces.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Common bindings for video receiver and transmitter interface endpoints
> > > +
> > > +maintainers:
> > > + - Guennadi Liakhovetski <g.liakhovetski@gmx.de>
> >
> > I did commit the original version of
> > Documentation/devicetree/bindings/media/video-interfaces.txt but that was
> > more than 8 years ago, I haven't worked in media / V4L for several years
> > now, so, I don't think I can meaningfully maintain that file now.
>
> Okay, I'll drop you.
>
> Anyone else want to sign up? Laurent?
>
> Rob
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v3 2/2] dt-bindings: media: Use graph and video-interfaces schemas
2020-12-10 21:16 ` [PATCH v3 2/2] dt-bindings: media: Use graph and video-interfaces schemas Rob Herring
@ 2020-12-16 15:19 ` Laurent Pinchart
2020-12-16 17:38 ` Rob Herring
0 siblings, 1 reply; 21+ messages in thread
From: Laurent Pinchart @ 2020-12-16 15:19 UTC (permalink / raw)
To: Rob Herring
Cc: Guennadi Liakhovetski, Sakari Ailus, Maxime Ripard,
Mauro Carvalho Chehab, Jacopo Mondi, Laurent Pinchart,
devicetree, linux-kernel, linux-media
Hi Rob,
Thank you for the patch.
On Thu, Dec 10, 2020 at 03:16:25PM -0600, Rob Herring wrote:
> Now that we have graph and video-interfaces schemas, rework the media
> related schemas to use them.
>
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: Jacopo Mondi <jacopo@jmondi.org>
> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> Cc: linux-media@vger.kernel.org
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> v3:
> - Add mipi-ccs.yaml, ovti,ov02a10.yaml
>
> v2:
> - Update based on graph schema changes and addition of video-interfaces
> schemas
>
> ---
> .../media/allwinner,sun4i-a10-csi.yaml | 11 +-
> .../media/allwinner,sun6i-a31-csi.yaml | 12 +-
> .../bindings/media/i2c/adv7180.yaml | 36 ++----
> .../bindings/media/i2c/adv7604.yaml | 37 ++----
> .../bindings/media/i2c/aptina,mt9v111.yaml | 4 +-
> .../bindings/media/i2c/imi,rdacm2x-gmsl.yaml | 30 +----
> .../devicetree/bindings/media/i2c/imx219.yaml | 21 ++--
> .../bindings/media/i2c/maxim,max9286.yaml | 101 ++++------------
> .../bindings/media/i2c/mipi-ccs.yaml | 15 +--
> .../devicetree/bindings/media/i2c/ov5647.yaml | 20 +---
> .../devicetree/bindings/media/i2c/ov8856.yaml | 21 +---
> .../bindings/media/i2c/ovti,ov02a10.yaml | 30 ++---
> .../bindings/media/i2c/ovti,ov2680.yaml | 6 +-
> .../bindings/media/i2c/ovti,ov772x.yaml | 9 +-
> .../bindings/media/i2c/sony,imx214.yaml | 25 ++--
> .../bindings/media/i2c/sony,imx274.yaml | 3 +-
> .../bindings/media/marvell,mmp2-ccic.yaml | 15 +--
> .../bindings/media/nxp,imx7-csi.yaml | 5 +-
> .../bindings/media/nxp,imx7-mipi-csi2.yaml | 32 +----
> .../bindings/media/renesas,ceu.yaml | 17 +--
> .../bindings/media/renesas,csi2.yaml | 54 ++-------
> .../bindings/media/renesas,vin.yaml | 113 +++---------------
> .../bindings/media/rockchip-isp1.yaml | 40 +------
> .../bindings/media/st,stm32-dcmi.yaml | 18 +--
> .../devicetree/bindings/media/ti,cal.yaml | 55 ++-------
> .../bindings/media/xilinx/xlnx,csi2rxss.yaml | 39 +-----
> 26 files changed, 169 insertions(+), 600 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
> index 09318830db47..6ced94064215 100644
> --- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
> +++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
> @@ -67,14 +67,14 @@ properties:
> interconnect-names:
> const: dma-mem
>
> - # See ./video-interfaces.txt for details
> port:
> - type: object
> + $ref: /schemas/graph.yaml#/$defs/port-base
> additionalProperties: false
>
> properties:
> endpoint:
> - type: object
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
>
> properties:
> bus-width:
> @@ -83,7 +83,6 @@ properties:
> data-active: true
> hsync-active: true
> pclk-sample: true
> - remote-endpoint: true
> vsync-active: true
>
> required:
> @@ -91,12 +90,8 @@ properties:
> - data-active
> - hsync-active
> - pclk-sample
> - - remote-endpoint
> - vsync-active
>
> - required:
> - - endpoint
> -
> required:
> - compatible
> - reg
> diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
> index 1fd9b5532a21..8b568072a069 100644
> --- a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
> +++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
> @@ -40,17 +40,15 @@ properties:
> resets:
> maxItems: 1
>
> - # See ./video-interfaces.txt for details
> port:
> - type: object
> + $ref: /schemas/graph.yaml#/$defs/port-base
>
> properties:
> endpoint:
> - type: object
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
>
> properties:
> - remote-endpoint: true
> -
> bus-width:
> enum: [ 8, 10, 12, 16 ]
>
> @@ -60,10 +58,6 @@ properties:
>
> required:
> - bus-width
> - - remote-endpoint
> -
> - required:
> - - endpoint
>
> additionalProperties: false
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/adv7180.yaml b/Documentation/devicetree/bindings/media/i2c/adv7180.yaml
> index d8c54f9d9506..bcfd93739b4f 100644
> --- a/Documentation/devicetree/bindings/media/i2c/adv7180.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/adv7180.yaml
> @@ -36,17 +36,9 @@ properties:
> maxItems: 1
>
> port:
> - type: object
> - description:
> - A node containing a single endpoint as doucmented in
> - Documentation/devicetree/bindings/media/video-interfaces.txt
> -
> - ports:
> - type: object
> - description:
> - A node containing input and output port nodes with endpoint definitions
> - as documented in
> - Documentation/devicetree/bindings/media/video-interfaces.txt
> + $ref: /schemas/graph.yaml#/properties/port
> +
> + ports: true
>
> additionalProperties: false
>
> @@ -80,25 +72,20 @@ allOf:
> then:
> properties:
> ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> properties:
> - '#address-cells':
> - const: 1
> - '#size-cells':
> - const: 0
> port@3:
> - type: object
> + $ref: /schemas/graph.yaml#/properties/port
> description: Output port
>
> patternProperties:
> "^port@[0-2]$":
> - type: object
> + $ref: /schemas/graph.yaml#/properties/port
> description: Input port
>
> required:
> - port@3
>
> - additionalProperties: false
> -
> required:
> - ports
>
> @@ -110,25 +97,20 @@ allOf:
> then:
> properties:
> ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> properties:
> - '#address-cells':
> - const: 1
> - '#size-cells':
> - const: 0
> port@6:
> - type: object
> + $ref: /schemas/graph.yaml#/properties/port
> description: Output port
>
> patternProperties:
> "^port@[0-5]$":
> - type: object
> + $ref: /schemas/graph.yaml#/properties/port
> description: Input port
>
> required:
> - port@6
>
> - additionalProperties: false
> -
> required:
> - ports
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml
> index 407baddfaa1d..df634b0c1f8c 100644
> --- a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml
> @@ -64,16 +64,12 @@ properties:
> description:
> Select which input is selected after reset.
>
> - ports:
> - type: object
> - description:
> - A node containing input and output port nodes with endpoint definitions
> - as documented in
> - Documentation/devicetree/bindings/media/video-interfaces.txt
> + ports: true
>
> required:
> - compatible
> - reg
> + - ports
>
> additionalProperties: false
>
> @@ -86,26 +82,19 @@ allOf:
> then:
> properties:
> ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> properties:
> - '#address-cells':
> - const: 1
> - '#size-cells':
> - const: 0
> port@0:
> - type: object
> + $ref: /schemas/graph.yaml#/properties/port
> description: Input port
> +
> port@1:
> - type: object
> + $ref: /schemas/graph.yaml#/properties/port
> description: Output port
>
> required:
> - port@1
>
> - additionalProperties: false
> -
> - required:
> - - ports
> -
> - if:
> properties:
> compatible:
> @@ -114,28 +103,20 @@ allOf:
> then:
> properties:
> ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> properties:
> - '#address-cells':
> - const: 1
> - '#size-cells':
> - const: 0
> port@2:
> - type: object
> + $ref: /schemas/graph.yaml#/properties/port
> description: Output port
>
> patternProperties:
> "^port@[0-1]$":
> - type: object
> + $ref: /schemas/graph.yaml#/properties/port
> description: Input port
>
> required:
> - port@2
>
> - additionalProperties: false
> -
> - required:
> - - ports
> -
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
> index ff9546e95d05..e53b8d65f381 100644
> --- a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
> @@ -41,9 +41,9 @@ properties:
> maxItems: 1
>
> port:
> - type: object
> + $ref: /schemas/graph.yaml#/properties/port
> description: |
> - Output video port. See ../video-interfaces.txt.
> + Output video port.
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml
> index 3dc06c628e64..e57575c44930 100644
> --- a/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml
> @@ -86,33 +86,9 @@ properties:
> maxItems: 3
>
> port:
> - type: object
> - additionalProperties: false
> - description: -|
> - Connection to the remote GMSL endpoint are modelled using the OF graph
> - bindings in accordance with the video interface bindings defined in
> - Documentation/devicetree/bindings/media/video-interfaces.txt.
> -
> - The device node contains a single "port" child node with a single
> - "endpoint" sub-device.
> -
> - properties:
> - endpoint:
> - type: object
> - additionalProperties: false
> -
> - properties:
> - remote-endpoint:
> - description: -|
> - phandle to the remote GMSL endpoint sub-node in the remote node
> - port.
> - maxItems: 1
> -
> - required:
> - - remote-endpoint
> -
> - required:
> - - endpoint
> + $ref: /schemas/graph.yaml#/properties/port
> + description:
> + Connection to the remote GMSL endpoint.
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/media/i2c/imx219.yaml b/Documentation/devicetree/bindings/media/i2c/imx219.yaml
> index dfc4d29a4f04..012c0565d8ae 100644
> --- a/Documentation/devicetree/bindings/media/i2c/imx219.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/imx219.yaml
> @@ -44,12 +44,15 @@ properties:
> Reference to the GPIO connected to the xclr pin, if any.
> Must be released (set high) after all supplies are applied.
>
> - # See ../video-interfaces.txt for more details
> port:
> - type: object
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + additionalProperties: false
> +
> properties:
> endpoint:
> - type: object
> + $ref: /schemas/media/video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> properties:
> data-lanes:
> description: |-
> @@ -60,16 +63,8 @@ properties:
> - const: 1
> - const: 2
>
> - clock-noncontinuous:
> - type: boolean
> - description: |-
> - MIPI CSI-2 clock is non-continuous if this property is present,
> - otherwise it's continuous.
> -
> - link-frequencies:
> - $ref: /schemas/types.yaml#/definitions/uint64-array
> - description:
> - Allowed data bus frequencies.
> + clock-noncontinuous: true
> + link-frequencies: true
>
> required:
> - link-frequencies
> diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
> index 9ea827092fdd..3a52dc81eabd 100644
> --- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
> @@ -52,81 +52,41 @@ properties:
> const: 2
>
> ports:
> - type: object
> - description: |
> - The connections to the MAX9286 GMSL and its endpoint nodes are modelled
> - using the OF graph bindings in accordance with the video interface
> - bindings defined in
> - Documentation/devicetree/bindings/media/video-interfaces.txt.
> -
> - The following table lists the port number corresponding to each device
> - port.
> -
> - Port Description
> - ----------------------------------------
> - Port 0 GMSL Input 0
> - Port 1 GMSL Input 1
> - Port 2 GMSL Input 2
> - Port 3 GMSL Input 3
> - Port 4 CSI-2 Output
> + $ref: /schemas/graph.yaml#/properties/ports
>
> properties:
> - '#address-cells':
> - const: 1
> -
> - '#size-cells':
> - const: 0
> -
> - port@[0-3]:
> - type: object
> - properties:
> - reg:
> - enum: [ 0, 1, 2, 3 ]
> -
> - endpoint:
> - type: object
> -
> - properties:
> - remote-endpoint:
> - description: |
> - phandle to the remote GMSL source endpoint subnode in the
> - remote node port.
> + port@0:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: GMSL Input 0
>
> - required:
> - - remote-endpoint
> + port@1:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: GMSL Input 1
>
> - required:
> - - reg
> - - endpoint
> + port@2:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: GMSL Input 2
>
> - additionalProperties: false
> + port@3:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: GMSL Input 3
>
> port@4:
> - type: object
> - properties:
> - reg:
> - const: 4
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description: CSI-2 Output
>
> + properties:
> endpoint:
> - type: object
> + $ref: /schemas/media/video-interfaces.yaml#
> + unevaluatedProperties: false
>
> properties:
> - remote-endpoint:
> - description: phandle to the remote CSI-2 sink endpoint.
> -
> - data-lanes:
> - description: array of physical CSI-2 data lane indexes.
> + data-lanes: true
>
> required:
> - - remote-endpoint
> - data-lanes
>
> - required:
> - - reg
> - - endpoint
> -
> - additionalProperties: false
> -
> required:
> - port@4
>
> @@ -184,25 +144,8 @@ properties:
> requirements of the currently connected remote device.
>
> port:
> - type: object
> -
> - properties:
> - endpoint:
> - type: object
> -
> - properties:
> - remote-endpoint:
> - description: phandle to the MAX9286 sink endpoint.
> -
> - required:
> - - remote-endpoint
> -
> - additionalProperties: false
> -
> - required:
> - - endpoint
> -
> - additionalProperties: false
> + $ref: /schemas/graph.yaml#/properties/port
> + description: Connection to the MAX9286 sink.
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
> index d94bd67ccea1..3657f2f41098 100644
> --- a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
> @@ -73,19 +73,16 @@ properties:
> enum: [ 0, 180 ]
>
> port:
> - type: object
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + additionalProperties: false
> +
> properties:
> endpoint:
> - type: object
> + $ref: /schemas/media/video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> properties:
> - link-frequencies:
> - $ref: /schemas/types.yaml#/definitions/uint64-array
> - description: List of allowed data link frequencies.
> - data-lanes:
> - minItems: 1
> - maxItems: 8
Don't we need
link-frequencies: true
data-lanes: true
to convey the fact that those properties are applicable for this device
? This applies to a few locations below too.
> bus-type:
> - description: The type of the data bus.
> oneOf:
> - const: 1 # CSI-2 C-PHY
> - const: 3 # CCP2
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.yaml b/Documentation/devicetree/bindings/media/i2c/ov5647.yaml
> index 280c62afae13..3b1ea9da437a 100644
> --- a/Documentation/devicetree/bindings/media/i2c/ov5647.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/ov5647.yaml
> @@ -31,27 +31,15 @@ properties:
> maxItems: 1
>
> port:
> - type: object
> - description: |-
> - Should contain one endpoint sub-node used to model connection to the
> - video receiver according to the specification defined in
> - Documentation/devicetree/bindings/media/video-interfaces.txt.
> + $ref: /schemas/graph.yaml#/$defs/port-base
>
> properties:
> endpoint:
> - type: object
> + $ref: /schemas/media/video-interfaces.yaml#
> + unevaluatedProperties: false
>
> properties:
> - remote-endpoint:
> - description: |-
> - phandle to the video receiver input port.
> -
> - clock-noncontinuous:
> - type: boolean
> - description: |-
> - Set to true to allow MIPI CSI-2 non-continuous clock operations.
> -
> - additionalProperties: false
> + clock-noncontinuous: true
>
> additionalProperties: false
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
> index cde85553fd01..c29b057ae922 100644
> --- a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
> @@ -57,16 +57,13 @@ properties:
> active low.
>
> port:
> - type: object
> + $ref: /schemas/graph.yaml#/$defs/port-base
> additionalProperties: false
> - description:
> - A node containing an output port node with an endpoint definition
> - as documented in
> - Documentation/devicetree/bindings/media/video-interfaces.txt
>
> properties:
> endpoint:
> - type: object
> + $ref: /schemas/media/video-interfaces.yaml#
> + unevaluatedProperties: false
>
> properties:
> data-lanes:
> @@ -79,18 +76,13 @@ properties:
> - const: 4
>
> link-frequencies:
> - $ref: /schemas/types.yaml#/definitions/uint64-array
> - description:
> - Allowed data bus frequencies. 360000000, 180000000 Hz or both
> - are supported by the driver.
> -
> + maxItems: 2
> + items:
> + enum: [ 360000000, 180000000 ]
This is a limitation of the driver, not the device. Should we keep this
information in a comment, to eventually get it fixed and drop the
limitation from the bindings ?
>
> required:
> - link-frequencies
>
> - required:
> - - endpoint
> -
> required:
> - compatible
> - reg
> @@ -139,4 +131,3 @@ examples:
> };
> };
> ...
> -
> diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
> index 1c3879ec4122..aaf541cd3833 100644
> --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
> @@ -17,6 +17,9 @@ description: |-
> @ 1600x1200 (UXGA) resolution transferred over a 1-lane MIPI interface. The
> sensor output is available via CSI-2 serial data output.
>
> +allOf:
> + - $ref: /schemas/media/video-interface-device.yaml#
> +
> properties:
> compatible:
> const: ovti,ov02a10
> @@ -66,42 +69,33 @@ properties:
> maxItems: 1
>
> rotation:
> - description:
> - Definition of the sensor's placement.
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint32"
> - - enum:
> - - 0 # Sensor Mounted Upright
> - - 180 # Sensor Mounted Upside Down
> - default: 0
> -
> - # See ../video-interfaces.txt for details
> + enum:
> + - 0 # Sensor Mounted Upright
> + - 180 # Sensor Mounted Upside Down
> + default: 0
> +
> port:
> - type: object
> + $ref: /schemas/graph.yaml#/$defs/port-base
> additionalProperties: false
> description:
> Output port node, single endpoint describing the CSI-2 transmitter.
>
> properties:
> endpoint:
> - type: object
> - additionalProperties: false
> + $ref: /schemas/media/video-interfaces.yaml#
> + unevaluatedProperties: false
>
> properties:
> - link-frequencies: true
> ovti,mipi-clock-voltage:
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: "/schemas/types.yaml#/definitions/uint32"
> description:
> Definition of MIPI clock voltage unit. This entry corresponds to
> the link speed defined by the 'link-frequencies' property.
> If present, the value shall be in the range of 0-4.
> default: 4
> - remote-endpoint: true
>
> required:
> - link-frequencies
> - - remote-endpoint
>
> required:
> - endpoint
> diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
> index 43bf749807e1..cf456f8d9ddc 100644
> --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
> @@ -50,11 +50,9 @@ properties:
> Definition of the regulator used as digital power supply.
>
> port:
> - type: object
> + $ref: /schemas/graph.yaml#/properties/port
> description:
> - A node containing an output port node with an endpoint definition
> - as documented in
> - Documentation/devicetree/bindings/media/video-interfaces.txt
> + A node containing an output port node.
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
> index 6866c2cdac50..44529425ce3a 100644
> --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
> @@ -37,13 +37,14 @@ properties:
> maxItems: 1
>
> port:
> - type: object
> + $ref: /schemas/graph.yaml#/$defs/port-base
> description: |
> - Video output port. See ../video-interfaces.txt.
> + Video output port.
>
> properties:
> endpoint:
> - type: object
> + $ref: /schemas/media/video-interfaces.yaml#
> + unevaluatedProperties: false
>
> properties:
> bus-type:
> @@ -91,8 +92,6 @@ properties:
> required:
> - bus-type
>
> - unevaluatedProperties: false
> -
> additionalProperties: false
>
> required:
> diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
> index 1a3590dd0e98..1b69b6342978 100644
> --- a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
> @@ -15,6 +15,9 @@ description: |
> interface. Image data is sent through MIPI CSI-2, through 2 or 4 lanes at a
> maximum throughput of 1.2Gbps/lane.
>
> +allOf:
> + - $ref: ../video-interface-devices.yaml#
> +
> properties:
> compatible:
> const: sony,imx214
> @@ -47,25 +50,21 @@ properties:
> description: Chip digital core regulator (1.12V).
> maxItems: 1
>
> - flash-leds:
> - description: See ../video-interfaces.txt
> -
> - lens-focus:
> - description: See ../video-interfaces.txt
> + flash-leds: true
> + lens-focus: true
>
> port:
> - type: object
> + $ref: /schemas/graph.yaml#/$defs/port-base
> description: |
> - Video output port. See ../video-interfaces.txt.
> + Video output port.
>
> properties:
> endpoint:
> - type: object
> + $ref: /schemas/media/video-interfaces.yaml#
> + unevaluatedProperties: false
>
> properties:
> data-lanes:
> - $ref: /schemas/types.yaml#/definitions/uint32-array
> - description: See ../video-interfaces.txt
> anyOf:
> - items:
> - const: 1
> @@ -76,16 +75,12 @@ properties:
> - const: 3
> - const: 4
>
> - link-frequencies:
> - $ref: /schemas/types.yaml#/definitions/uint64-array
> - description: See ../video-interfaces.txt
> + link-frequencies: true
>
> required:
> - data-lanes
> - link-frequencies
>
> - unevaluatedProperties: false
> -
> additionalProperties: false
>
> required:
> diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
> index f697e1a20beb..90828020e42a 100644
> --- a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
> @@ -44,8 +44,7 @@ properties:
> maxItems: 1
>
> port:
> - type: object
> - description: Output video port. See ../video-interfaces.txt.
> + $ref: /schemas/graph.yaml#/properties/port
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
> index 49bff738aca5..9e85c70d1a1f 100644
> --- a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
> +++ b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
> @@ -24,29 +24,20 @@ properties:
> maxItems: 1
>
> port:
> - type: object
> + $ref: /schemas/graph.yaml#/$defs/port-base
> additionalProperties: false
>
> properties:
> endpoint:
> - type: object
> - additionalProperties: false
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
>
> - # Properties described in
> - # Documentation/devicetree/bindings/media/video-interfaces.txt
> properties:
> - remote-endpoint: true
> hsync-active: true
> vsync-active: true
> pclk-sample: true
> bus-type: true
>
> - required:
> - - remote-endpoint
> -
> - required:
> - - endpoint
> -
> clocks:
> minItems: 1
> maxItems: 3
> diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
> index 4e81a47e60ac..d91575b8ebb9 100644
> --- a/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
> +++ b/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
> @@ -33,10 +33,7 @@ properties:
> - const: mclk
>
> port:
> - type: object
> - description:
> - A node containing input port nodes with endpoint definitions as documented
> - in Documentation/devicetree/bindings/media/video-interfaces.txt
> + $ref: /schemas/graph.yaml#/properties/port
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> index 0668332959e7..be47a7b62ca9 100644
> --- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> +++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> @@ -58,35 +58,22 @@ properties:
> Differential receiver (HS-RX) settle time
>
> ports:
> - type: object
> - description:
> - A node containing input and output port nodes with endpoint definitions
> - as documented in
> - Documentation/devicetree/bindings/media/video-interfaces.txt
> + $ref: /schemas/graph.yaml#/properties/ports
>
> properties:
> - '#address-cells':
> - const: 1
> -
> - '#size-cells':
> - const: 0
> -
> port@0:
> - type: object
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> description:
> Input port node, single endpoint describing the CSI-2 transmitter.
>
> properties:
> - reg:
> - const: 0
> -
> endpoint:
> - type: object
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
>
> properties:
> data-lanes:
> - $ref: /schemas/types.yaml#/definitions/uint32-array
> - description: See ../video-interfaces.txt
> oneOf:
> - items:
> - const: 1
> @@ -94,18 +81,11 @@ properties:
> - const: 1
> - const: 2
>
> - remote-endpoint: true
> -
> required:
> - data-lanes
> - - remote-endpoint
> -
> - additionalProperties: false
> -
> - additionalProperties: false
>
> port@1:
> - type: object
> + $ref: /schemas/graph.yaml#/properties/port
> description:
> Output port node
>
> diff --git a/Documentation/devicetree/bindings/media/renesas,ceu.yaml b/Documentation/devicetree/bindings/media/renesas,ceu.yaml
> index c7e1e4fe67e6..50e0740af15a 100644
> --- a/Documentation/devicetree/bindings/media/renesas,ceu.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,ceu.yaml
> @@ -34,18 +34,15 @@ properties:
> maxItems: 1
>
> port:
> - type: object
> - additionalProperties: false
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
>
> properties:
> endpoint:
> - type: object
> - additionalProperties: false
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
>
> - # Properties described in
> - # Documentation/devicetree/bindings/media/video-interfaces.txt
> properties:
> - remote-endpoint: true
> hsync-active: true
> vsync-active: true
> field-even-active: false
> @@ -53,12 +50,6 @@ properties:
> enum: [8, 16]
> default: 8
>
> - required:
> - - remote-endpoint
> -
> - required:
> - - endpoint
> -
> required:
> - compatible
> - reg
> diff --git a/Documentation/devicetree/bindings/media/renesas,csi2.yaml b/Documentation/devicetree/bindings/media/renesas,csi2.yaml
> index 533c2f181db7..20396f1be999 100644
> --- a/Documentation/devicetree/bindings/media/renesas,csi2.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,csi2.yaml
> @@ -46,24 +46,19 @@ properties:
> maxItems: 1
>
> ports:
> - type: object
> - description:
> - A node containing input and output port nodes with endpoint definitions
> - as documented in
> - Documentation/devicetree/bindings/media/video-interfaces.txt
> + $ref: /schemas/graph.yaml#/properties/ports
>
> properties:
> port@0:
> - type: object
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> description:
> Input port node, single endpoint describing the CSI-2 transmitter.
>
> properties:
> - reg:
> - const: 0
> -
> endpoint:
> - type: object
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
>
> properties:
> clock-lanes:
> @@ -72,50 +67,19 @@ properties:
> data-lanes:
> maxItems: 1
>
> - remote-endpoint: true
> -
> required:
> - clock-lanes
> - data-lanes
> - - remote-endpoint
> -
> - additionalProperties: false
> -
> - additionalProperties: false
>
> port@1:
> - type: object
> + $ref: /schemas/graph.yaml#/properties/port
> description:
> Output port node, multiple endpoints describing all the R-Car VIN
> modules connected the CSI-2 receiver.
>
> - properties:
> - '#address-cells':
> - const: 1
> -
> - '#size-cells':
> - const: 0
> -
> - reg:
> - const: 1
> -
> - patternProperties:
> - "^endpoint@[0-9a-f]$":
> - type: object
> -
> - properties:
> - reg:
> - maxItems: 1
> -
> - remote-endpoint: true
> -
> - required:
> - - reg
> - - remote-endpoint
> -
> - additionalProperties: false
> -
> - additionalProperties: false
> + required:
> + - port@0
> + - port@1
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml
> index ad2fe660364b..fe7c4cbfe4ba 100644
> --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml
> @@ -69,15 +69,15 @@ properties:
>
> #The per-board settings for Gen2 and RZ/G1 platforms:
> port:
> - type: object
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> description:
> - A node containing a parallel input with a single endpoint definitions as
> - documented in
> - Documentation/devicetree/bindings/media/video-interfaces.txt
> + A node containing a parallel input
>
> properties:
> endpoint:
> - type: object
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
>
> properties:
> hsync-active:
> @@ -106,15 +106,6 @@ properties:
>
> data-active: true
>
> - remote-endpoint: true
> -
> - required:
> - - remote-endpoint
> -
> - additionalProperties: false
> -
> - additionalProperties: false
> -
> #The per-board settings for Gen3 and RZ/G2 platforms:
> renesas,id:
> description: VIN channel number
> @@ -123,23 +114,18 @@ properties:
> maximum: 15
>
> ports:
> - type: object
> - description:
> - A node containing input nodes with endpoint definitions as documented in
> - Documentation/devicetree/bindings/media/video-interfaces.txt
> + $ref: /schemas/graph.yaml#/properties/ports
>
> properties:
> port@0:
> - type: object
> + $ref: /schemas/graph.yaml#/properties/port
> description:
> Input port node, single endpoint describing a parallel input source.
>
> properties:
> - reg:
> - const: 0
> -
> endpoint:
> - type: object
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
>
> properties:
> hsync-active:
> @@ -168,98 +154,29 @@ properties:
>
> data-active: true
>
> - remote-endpoint: true
> -
> - required:
> - - remote-endpoint
> -
> - additionalProperties: false
> -
> - required:
> - - endpoint
> -
> - additionalProperties: false
> -
> port@1:
> - type: object
> + $ref: /schemas/graph.yaml#/properties/port
> description:
> Input port node, multiple endpoints describing all the R-Car CSI-2
> modules connected the VIN.
>
> properties:
> - '#address-cells':
> - const: 1
> -
> - '#size-cells':
> - const: 0
> -
> - reg:
> - const: 1
> -
> endpoint@0:
> - type: object
> + $ref: /schemas/graph.yaml#/properties/endpoint
> description: Endpoint connected to CSI20.
>
> - properties:
> - reg:
> - const: 0
> -
> - remote-endpoint: true
> -
> - required:
> - - reg
> - - remote-endpoint
> -
> - additionalProperties: false
> -
> endpoint@1:
> - type: object
> + $ref: /schemas/graph.yaml#/properties/endpoint
> description: Endpoint connected to CSI21.
>
> - properties:
> - reg:
> - const: 1
> -
> - remote-endpoint: true
> -
> - required:
> - - reg
> - - remote-endpoint
> -
> - additionalProperties: false
> -
> endpoint@2:
> - type: object
> + $ref: /schemas/graph.yaml#/properties/endpoint
> description: Endpoint connected to CSI40.
>
> - properties:
> - reg:
> - const: 2
> -
> - remote-endpoint: true
> -
> - required:
> - - reg
> - - remote-endpoint
> -
> - additionalProperties: false
> -
> endpoint@3:
> - type: object
> + $ref: /schemas/graph.yaml#/properties/endpoint
> description: Endpoint connected to CSI41.
>
> - properties:
> - reg:
> - const: 3
> -
> - remote-endpoint: true
> -
> - required:
> - - reg
> - - remote-endpoint
> -
> - additionalProperties: false
> -
> anyOf:
> - required:
> - endpoint@0
> @@ -270,8 +187,6 @@ properties:
> - required:
> - endpoint@3
>
> - additionalProperties: false
> -
> required:
> - compatible
> - reg
> diff --git a/Documentation/devicetree/bindings/media/rockchip-isp1.yaml b/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
> index 2004c054ed1a..a6b1eff879ed 100644
> --- a/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
> +++ b/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
> @@ -56,56 +56,26 @@ properties:
> power-domains:
> maxItems: 1
>
> - # See ./video-interfaces.txt for details
> ports:
> - type: object
> - additionalProperties: false
> + $ref: /schemas/graph.yaml#/properties/ports
>
> properties:
> - "#address-cells":
> - const: 1
> -
> - "#size-cells":
> - const: 0
> -
> port@0:
> - type: object
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> description: connection point for sensors at MIPI-DPHY RX0
> - additionalProperties: false
>
> properties:
> - "#address-cells":
> - const: 1
> -
> - "#size-cells":
> - const: 0
> -
> - reg:
> - const: 0
> -
> - patternProperties:
> endpoint:
> - type: object
> - additionalProperties: false
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
>
> properties:
> - reg:
> - maxItems: 1
> -
> data-lanes:
> minItems: 1
> maxItems: 4
>
> - remote-endpoint: true
> -
> - required:
> - - reg
> - - "#address-cells"
> - - "#size-cells"
> -
> required:
> - - "#address-cells"
> - - "#size-cells"
> - port@0
>
> required:
> diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
> index c18574bb3e81..41e1d0cd80e5 100644
> --- a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
> +++ b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
> @@ -37,16 +37,15 @@ properties:
> maxItems: 1
>
> port:
> - type: object
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> description:
> - DCMI supports a single port node with parallel bus. It should contain
> - one 'port' child node with child 'endpoint' node. Please refer to the
> - bindings defined in
> - Documentation/devicetree/bindings/media/video-interfaces.txt.
> + DCMI supports a single port node with parallel bus.
>
> properties:
> endpoint:
> - type: object
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
>
> properties:
> bus-type:
> @@ -57,8 +56,6 @@ properties:
> enum: [8, 10, 12, 14]
> default: 8
>
> - remote-endpoint: true
> -
> allOf:
> - if:
> properties:
> @@ -73,14 +70,9 @@ properties:
> enum: [8]
>
> required:
> - - remote-endpoint
> - bus-type
> - pclk-sample
>
> - unevaluatedProperties: false
> -
> - additionalProperties: false
> -
> required:
> - compatible
> - reg
> diff --git a/Documentation/devicetree/bindings/media/ti,cal.yaml b/Documentation/devicetree/bindings/media/ti,cal.yaml
> index 5e066629287d..65177cd69514 100644
> --- a/Documentation/devicetree/bindings/media/ti,cal.yaml
> +++ b/Documentation/devicetree/bindings/media/ti,cal.yaml
> @@ -15,10 +15,7 @@ description: |-
> processing capability to connect CSI2 image-sensor modules to the
> DRA72x device.
>
> - CAL supports 2 camera port nodes on MIPI bus. Each CSI2 camera port nodes
> - should contain a 'port' child node with child 'endpoint' node. Please
> - refer to the bindings defined in
> - Documentation/devicetree/bindings/media/video-interfaces.txt.
> + CAL supports 2 camera port nodes on MIPI bus.
>
> properties:
> compatible:
> @@ -67,31 +64,19 @@ properties:
> Documentation/devicetree/bindings/power/power_domain.txt
> maxItems: 1
>
> - # See ./video-interfaces.txt for details
> ports:
> - type: object
> - additionalProperties: false
> + $ref: /schemas/graph.yaml#/properties/ports
>
> properties:
> - "#address-cells":
> - const: 1
> -
> - "#size-cells":
> - const: 0
> -
> port@0:
> - type: object
> - additionalProperties: false
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description: CSI2 Port #0
>
> properties:
> - reg:
> - const: 0
> - description: CSI2 Port #0
> -
> - patternProperties:
> endpoint:
> - type: object
> - additionalProperties: false
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
>
> properties:
> clock-lanes:
> @@ -101,24 +86,15 @@ properties:
> minItems: 1
> maxItems: 4
>
> - remote-endpoint: true
> -
> - required:
> - - reg
> -
> port@1:
> - type: object
> - additionalProperties: false
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description: CSI2 Port #1
>
> properties:
> - reg:
> - const: 1
> - description: CSI2 Port #1
> -
> - patternProperties:
> endpoint:
> - type: object
> - additionalProperties: false
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
>
> properties:
> clock-lanes:
> @@ -128,14 +104,7 @@ properties:
> minItems: 1
> maxItems: 4
>
> - remote-endpoint: true
> -
> - required:
> - - reg
> -
> required:
> - - "#address-cells"
> - - "#size-cells"
> - port@0
>
> required:
> diff --git a/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml
> index 2961a5b6872f..7d77823dbb7a 100644
> --- a/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml
> +++ b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml
> @@ -97,24 +97,21 @@ properties:
> maxItems: 1
>
> ports:
> - type: object
> + $ref: /schemas/graph.yaml#/properties/ports
>
> properties:
> port@0:
> - type: object
> + $ref: /schemas/graph.yaml#/$defs/port-base
> description: |
> Input / sink port node, single endpoint describing the
> CSI-2 transmitter.
>
> properties:
> - reg:
> - const: 0
> -
> endpoint:
> - type: object
> + $ref: /schemas/media/video-interfaces.yaml#
> + unevaluatedProperties: false
>
> properties:
> -
> data-lanes:
> description: |
> This is required only in the sink port 0 endpoint which
> @@ -130,41 +127,17 @@ properties:
> - const: 3
> - const: 4
>
> - remote-endpoint: true
> -
> required:
> - data-lanes
> - - remote-endpoint
> -
> - additionalProperties: false
>
> - additionalProperties: false
> + unevaluatedProperties: false
>
> port@1:
> - type: object
> + $ref: /schemas/graph.yaml#/properties/port
> description: |
> Output / source port node, endpoint describing modules
> connected the CSI-2 receiver.
>
> - properties:
> -
> - reg:
> - const: 1
> -
> - endpoint:
> - type: object
> -
> - properties:
> -
> - remote-endpoint: true
> -
> - required:
> - - remote-endpoint
> -
> - additionalProperties: false
> -
> - additionalProperties: false
> -
> required:
> - compatible
> - reg
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v3 2/2] dt-bindings: media: Use graph and video-interfaces schemas
2020-12-16 15:19 ` Laurent Pinchart
@ 2020-12-16 17:38 ` Rob Herring
2020-12-16 17:43 ` Laurent Pinchart
0 siblings, 1 reply; 21+ messages in thread
From: Rob Herring @ 2020-12-16 17:38 UTC (permalink / raw)
To: Laurent Pinchart
Cc: Guennadi Liakhovetski, Sakari Ailus, Maxime Ripard,
Mauro Carvalho Chehab, Jacopo Mondi, Laurent Pinchart,
devicetree, linux-kernel, linux-media
On Wed, Dec 16, 2020 at 05:19:55PM +0200, Laurent Pinchart wrote:
> Hi Rob,
>
> Thank you for the patch.
>
> On Thu, Dec 10, 2020 at 03:16:25PM -0600, Rob Herring wrote:
> > Now that we have graph and video-interfaces schemas, rework the media
> > related schemas to use them.
> >
> > Cc: Maxime Ripard <mripard@kernel.org>
> > Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> > Cc: Jacopo Mondi <jacopo@jmondi.org>
> > Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> > Cc: linux-media@vger.kernel.org
> > Signed-off-by: Rob Herring <robh@kernel.org>
> > ---
> > diff --git a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
> > index d94bd67ccea1..3657f2f41098 100644
> > --- a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
> > +++ b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
> > @@ -73,19 +73,16 @@ properties:
> > enum: [ 0, 180 ]
> >
> > port:
> > - type: object
> > + $ref: /schemas/graph.yaml#/$defs/port-base
> > + additionalProperties: false
> > +
> > properties:
> > endpoint:
> > - type: object
> > + $ref: /schemas/media/video-interfaces.yaml#
> > + unevaluatedProperties: false
> > +
> > properties:
> > - link-frequencies:
> > - $ref: /schemas/types.yaml#/definitions/uint64-array
> > - description: List of allowed data link frequencies.
> > - data-lanes:
> > - minItems: 1
> > - maxItems: 8
>
> Don't we need
>
> link-frequencies: true
> data-lanes: true
>
> to convey the fact that those properties are applicable for this device
> ? This applies to a few locations below too.
Adding them would convey that to the reader, but wouldn't change the
schema validation. We'd have to use 'additionalProperties' instead and
also add 'remote-endpoint' everywhere (and 'reg' sometimes). I prefer
not doing all that, but if we want it just for purposes of documenting
the usage, that's fine.
> > bus-type:
> > - description: The type of the data bus.
> > oneOf:
> > - const: 1 # CSI-2 C-PHY
> > - const: 3 # CCP2
> > diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.yaml b/Documentation/devicetree/bindings/media/i2c/ov5647.yaml
> > index 280c62afae13..3b1ea9da437a 100644
> > --- a/Documentation/devicetree/bindings/media/i2c/ov5647.yaml
> > +++ b/Documentation/devicetree/bindings/media/i2c/ov5647.yaml
> > @@ -31,27 +31,15 @@ properties:
> > maxItems: 1
> >
> > port:
> > - type: object
> > - description: |-
> > - Should contain one endpoint sub-node used to model connection to the
> > - video receiver according to the specification defined in
> > - Documentation/devicetree/bindings/media/video-interfaces.txt.
> > + $ref: /schemas/graph.yaml#/$defs/port-base
> >
> > properties:
> > endpoint:
> > - type: object
> > + $ref: /schemas/media/video-interfaces.yaml#
> > + unevaluatedProperties: false
> >
> > properties:
> > - remote-endpoint:
> > - description: |-
> > - phandle to the video receiver input port.
> > -
> > - clock-noncontinuous:
> > - type: boolean
> > - description: |-
> > - Set to true to allow MIPI CSI-2 non-continuous clock operations.
> > -
> > - additionalProperties: false
> > + clock-noncontinuous: true
> >
> > additionalProperties: false
> >
> > diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
> > index cde85553fd01..c29b057ae922 100644
> > --- a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
> > +++ b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
> > @@ -57,16 +57,13 @@ properties:
> > active low.
> >
> > port:
> > - type: object
> > + $ref: /schemas/graph.yaml#/$defs/port-base
> > additionalProperties: false
> > - description:
> > - A node containing an output port node with an endpoint definition
> > - as documented in
> > - Documentation/devicetree/bindings/media/video-interfaces.txt
> >
> > properties:
> > endpoint:
> > - type: object
> > + $ref: /schemas/media/video-interfaces.yaml#
> > + unevaluatedProperties: false
> >
> > properties:
> > data-lanes:
> > @@ -79,18 +76,13 @@ properties:
> > - const: 4
> >
> > link-frequencies:
> > - $ref: /schemas/types.yaml#/definitions/uint64-array
> > - description:
> > - Allowed data bus frequencies. 360000000, 180000000 Hz or both
> > - are supported by the driver.
> > -
> > + maxItems: 2
> > + items:
> > + enum: [ 360000000, 180000000 ]
>
> This is a limitation of the driver, not the device. Should we keep this
> information in a comment, to eventually get it fixed and drop the
> limitation from the bindings ?
If your dts has anything else, then it won't work. Warning on that seems
valuable to me, so I think we should keep it. If someone with a better
driver complains, we can drop it.
I can keep the description with 'Frequencies listed are driver, not h/w
limitations'.
Rob
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v3 2/2] dt-bindings: media: Use graph and video-interfaces schemas
2020-12-16 17:38 ` Rob Herring
@ 2020-12-16 17:43 ` Laurent Pinchart
2020-12-16 21:59 ` Sakari Ailus
0 siblings, 1 reply; 21+ messages in thread
From: Laurent Pinchart @ 2020-12-16 17:43 UTC (permalink / raw)
To: Rob Herring
Cc: Guennadi Liakhovetski, Sakari Ailus, Maxime Ripard,
Mauro Carvalho Chehab, Jacopo Mondi, Laurent Pinchart,
devicetree, linux-kernel, linux-media
Hi Rob,
On Wed, Dec 16, 2020 at 11:38:41AM -0600, Rob Herring wrote:
> On Wed, Dec 16, 2020 at 05:19:55PM +0200, Laurent Pinchart wrote:
> > On Thu, Dec 10, 2020 at 03:16:25PM -0600, Rob Herring wrote:
> > > Now that we have graph and video-interfaces schemas, rework the media
> > > related schemas to use them.
> > >
> > > Cc: Maxime Ripard <mripard@kernel.org>
> > > Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> > > Cc: Jacopo Mondi <jacopo@jmondi.org>
> > > Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> > > Cc: linux-media@vger.kernel.org
> > > Signed-off-by: Rob Herring <robh@kernel.org>
> > > ---
>
>
> > > diff --git a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
> > > index d94bd67ccea1..3657f2f41098 100644
> > > --- a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
> > > +++ b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
> > > @@ -73,19 +73,16 @@ properties:
> > > enum: [ 0, 180 ]
> > >
> > > port:
> > > - type: object
> > > + $ref: /schemas/graph.yaml#/$defs/port-base
> > > + additionalProperties: false
> > > +
> > > properties:
> > > endpoint:
> > > - type: object
> > > + $ref: /schemas/media/video-interfaces.yaml#
> > > + unevaluatedProperties: false
> > > +
> > > properties:
> > > - link-frequencies:
> > > - $ref: /schemas/types.yaml#/definitions/uint64-array
> > > - description: List of allowed data link frequencies.
> > > - data-lanes:
> > > - minItems: 1
> > > - maxItems: 8
> >
> > Don't we need
> >
> > link-frequencies: true
> > data-lanes: true
> >
> > to convey the fact that those properties are applicable for this device
> > ? This applies to a few locations below too.
>
> Adding them would convey that to the reader, but wouldn't change the
> schema validation. We'd have to use 'additionalProperties' instead and
> also add 'remote-endpoint' everywhere (and 'reg' sometimes). I prefer
> not doing all that, but if we want it just for purposes of documenting
> the usage, that's fine.
I'd prefer keeping it to document what properties are applicable. If we
can later find a better way to express it in a way that will be taken
into account during validation, that will be best, but not required now.
> > > bus-type:
> > > - description: The type of the data bus.
> > > oneOf:
> > > - const: 1 # CSI-2 C-PHY
> > > - const: 3 # CCP2
> > > diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.yaml b/Documentation/devicetree/bindings/media/i2c/ov5647.yaml
> > > index 280c62afae13..3b1ea9da437a 100644
> > > --- a/Documentation/devicetree/bindings/media/i2c/ov5647.yaml
> > > +++ b/Documentation/devicetree/bindings/media/i2c/ov5647.yaml
> > > @@ -31,27 +31,15 @@ properties:
> > > maxItems: 1
> > >
> > > port:
> > > - type: object
> > > - description: |-
> > > - Should contain one endpoint sub-node used to model connection to the
> > > - video receiver according to the specification defined in
> > > - Documentation/devicetree/bindings/media/video-interfaces.txt.
> > > + $ref: /schemas/graph.yaml#/$defs/port-base
> > >
> > > properties:
> > > endpoint:
> > > - type: object
> > > + $ref: /schemas/media/video-interfaces.yaml#
> > > + unevaluatedProperties: false
> > >
> > > properties:
> > > - remote-endpoint:
> > > - description: |-
> > > - phandle to the video receiver input port.
> > > -
> > > - clock-noncontinuous:
> > > - type: boolean
> > > - description: |-
> > > - Set to true to allow MIPI CSI-2 non-continuous clock operations.
> > > -
> > > - additionalProperties: false
> > > + clock-noncontinuous: true
> > >
> > > additionalProperties: false
> > >
> > > diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
> > > index cde85553fd01..c29b057ae922 100644
> > > --- a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
> > > +++ b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
> > > @@ -57,16 +57,13 @@ properties:
> > > active low.
> > >
> > > port:
> > > - type: object
> > > + $ref: /schemas/graph.yaml#/$defs/port-base
> > > additionalProperties: false
> > > - description:
> > > - A node containing an output port node with an endpoint definition
> > > - as documented in
> > > - Documentation/devicetree/bindings/media/video-interfaces.txt
> > >
> > > properties:
> > > endpoint:
> > > - type: object
> > > + $ref: /schemas/media/video-interfaces.yaml#
> > > + unevaluatedProperties: false
> > >
> > > properties:
> > > data-lanes:
> > > @@ -79,18 +76,13 @@ properties:
> > > - const: 4
> > >
> > > link-frequencies:
> > > - $ref: /schemas/types.yaml#/definitions/uint64-array
> > > - description:
> > > - Allowed data bus frequencies. 360000000, 180000000 Hz or both
> > > - are supported by the driver.
> > > -
> > > + maxItems: 2
> > > + items:
> > > + enum: [ 360000000, 180000000 ]
> >
> > This is a limitation of the driver, not the device. Should we keep this
> > information in a comment, to eventually get it fixed and drop the
> > limitation from the bindings ?
>
> If your dts has anything else, then it won't work. Warning on that seems
> valuable to me, so I think we should keep it. If someone with a better
> driver complains, we can drop it.
>
> I can keep the description with 'Frequencies listed are driver, not h/w
> limitations'.
I'm fine with the constraint itself, my comment was referring to the
fact that we're dropping the description. Your description proposal
works for me, thanks.
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v3 1/2] media: dt-bindings: Convert video-interfaces.txt properties to schemas
2020-12-16 14:52 ` Laurent Pinchart
@ 2020-12-16 21:58 ` Sakari Ailus
2020-12-18 18:19 ` Rob Herring
1 sibling, 0 replies; 21+ messages in thread
From: Sakari Ailus @ 2020-12-16 21:58 UTC (permalink / raw)
To: Laurent Pinchart
Cc: Rob Herring, Guennadi Liakhovetski, Maxime Ripard,
Mauro Carvalho Chehab, Jacopo Mondi, Laurent Pinchart,
devicetree, linux-kernel, linux-media
Hi Laurent,
On Wed, Dec 16, 2020 at 04:52:20PM +0200, Laurent Pinchart wrote:
> > + clock-lanes:
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > + # Assume up to 9 physical lane indices
> > + maximum: 8
> > + description:
> > + Physical clock lane index. Position of an entry determines
>
> s/index/indexes/ (or indices) as there are potentially multiple entries
> (even if in practice, for all bus types we currently support, only one
> clock lane is supported) ?
We could easily change it if that appears.
The property was named in plural to align with data-lanes, without
intention of having more clock lanes. We could of course allow more if that
happens, but I doubt it.
--
Sakari Ailus
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v3 2/2] dt-bindings: media: Use graph and video-interfaces schemas
2020-12-16 17:43 ` Laurent Pinchart
@ 2020-12-16 21:59 ` Sakari Ailus
0 siblings, 0 replies; 21+ messages in thread
From: Sakari Ailus @ 2020-12-16 21:59 UTC (permalink / raw)
To: Laurent Pinchart
Cc: Rob Herring, Guennadi Liakhovetski, Maxime Ripard,
Mauro Carvalho Chehab, Jacopo Mondi, Laurent Pinchart,
devicetree, linux-kernel, linux-media
Hi Laurent, Rob,
On Wed, Dec 16, 2020 at 07:43:45PM +0200, Laurent Pinchart wrote:
> Hi Rob,
>
> On Wed, Dec 16, 2020 at 11:38:41AM -0600, Rob Herring wrote:
> > On Wed, Dec 16, 2020 at 05:19:55PM +0200, Laurent Pinchart wrote:
> > > On Thu, Dec 10, 2020 at 03:16:25PM -0600, Rob Herring wrote:
> > > > Now that we have graph and video-interfaces schemas, rework the media
> > > > related schemas to use them.
> > > >
> > > > Cc: Maxime Ripard <mripard@kernel.org>
> > > > Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> > > > Cc: Jacopo Mondi <jacopo@jmondi.org>
> > > > Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> > > > Cc: linux-media@vger.kernel.org
> > > > Signed-off-by: Rob Herring <robh@kernel.org>
> > > > ---
> >
> >
> > > > diff --git a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
> > > > index d94bd67ccea1..3657f2f41098 100644
> > > > --- a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
> > > > +++ b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
> > > > @@ -73,19 +73,16 @@ properties:
> > > > enum: [ 0, 180 ]
> > > >
> > > > port:
> > > > - type: object
> > > > + $ref: /schemas/graph.yaml#/$defs/port-base
> > > > + additionalProperties: false
> > > > +
> > > > properties:
> > > > endpoint:
> > > > - type: object
> > > > + $ref: /schemas/media/video-interfaces.yaml#
> > > > + unevaluatedProperties: false
> > > > +
> > > > properties:
> > > > - link-frequencies:
> > > > - $ref: /schemas/types.yaml#/definitions/uint64-array
> > > > - description: List of allowed data link frequencies.
> > > > - data-lanes:
> > > > - minItems: 1
> > > > - maxItems: 8
> > >
> > > Don't we need
> > >
> > > link-frequencies: true
> > > data-lanes: true
> > >
> > > to convey the fact that those properties are applicable for this device
> > > ? This applies to a few locations below too.
> >
> > Adding them would convey that to the reader, but wouldn't change the
> > schema validation. We'd have to use 'additionalProperties' instead and
> > also add 'remote-endpoint' everywhere (and 'reg' sometimes). I prefer
> > not doing all that, but if we want it just for purposes of documenting
> > the usage, that's fine.
>
> I'd prefer keeping it to document what properties are applicable. If we
> can later find a better way to express it in a way that will be taken
> into account during validation, that will be best, but not required now.
I agree.
There properties that are used for linking other devices such as
flash-leds. It could be related to any camera sensor, independently of its
properties. If we went that way, that should be also added to a lot of
places.
...
> > > > diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
> > > > index cde85553fd01..c29b057ae922 100644
> > > > --- a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
> > > > +++ b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
> > > > @@ -57,16 +57,13 @@ properties:
> > > > active low.
> > > >
> > > > port:
> > > > - type: object
> > > > + $ref: /schemas/graph.yaml#/$defs/port-base
> > > > additionalProperties: false
> > > > - description:
> > > > - A node containing an output port node with an endpoint definition
> > > > - as documented in
> > > > - Documentation/devicetree/bindings/media/video-interfaces.txt
> > > >
> > > > properties:
> > > > endpoint:
> > > > - type: object
> > > > + $ref: /schemas/media/video-interfaces.yaml#
> > > > + unevaluatedProperties: false
> > > >
> > > > properties:
> > > > data-lanes:
> > > > @@ -79,18 +76,13 @@ properties:
> > > > - const: 4
> > > >
> > > > link-frequencies:
> > > > - $ref: /schemas/types.yaml#/definitions/uint64-array
> > > > - description:
> > > > - Allowed data bus frequencies. 360000000, 180000000 Hz or both
> > > > - are supported by the driver.
> > > > -
> > > > + maxItems: 2
> > > > + items:
> > > > + enum: [ 360000000, 180000000 ]
> > >
> > > This is a limitation of the driver, not the device. Should we keep this
> > > information in a comment, to eventually get it fixed and drop the
> > > limitation from the bindings ?
> >
> > If your dts has anything else, then it won't work. Warning on that seems
> > valuable to me, so I think we should keep it. If someone with a better
> > driver complains, we can drop it.
> >
> > I can keep the description with 'Frequencies listed are driver, not h/w
> > limitations'.
>
> I'm fine with the constraint itself, my comment was referring to the
> fact that we're dropping the description. Your description proposal
> works for me, thanks.
Sounds good.
--
Sakari Ailus
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v3 1/2] media: dt-bindings: Convert video-interfaces.txt properties to schemas
2020-12-16 14:52 ` Laurent Pinchart
2020-12-16 21:58 ` Sakari Ailus
@ 2020-12-18 18:19 ` Rob Herring
2020-12-19 17:10 ` Laurent Pinchart
1 sibling, 1 reply; 21+ messages in thread
From: Rob Herring @ 2020-12-18 18:19 UTC (permalink / raw)
To: Laurent Pinchart
Cc: Guennadi Liakhovetski, Sakari Ailus, Maxime Ripard,
Mauro Carvalho Chehab, Jacopo Mondi, Laurent Pinchart,
devicetree, linux-kernel, linux-media
On Wed, Dec 16, 2020 at 04:52:20PM +0200, Laurent Pinchart wrote:
> Hi Rob,
>
> Thank you for the patch.
>
> On Thu, Dec 10, 2020 at 03:16:24PM -0600, Rob Herring wrote:
> > Convert video-interfaces.txt to DT schema. As it contains a mixture of
> > device level and endpoint properties, split it up into 2 schemas.
> >
> > Binding schemas will need to reference both the graph.yaml and
> > video-interfaces.yaml schemas. The exact schema depends on how many
> > ports and endpoints for the binding. A single port with a single
> > endpoint looks similar to this:
> >
> > port:
> > $ref: /schemas/graph.yaml#/$defs/port-base
> >
> > properties:
> > endpoint:
> > $ref: video-interfaces.yaml#
> > unevaluatedProperties: false
> >
> > properties:
> > bus-width:
> > enum: [ 8, 10, 12, 16 ]
> >
> > pclk-sample: true
> > hsync-active: true
> > vsync-active: true
> >
> > required:
> > - bus-width
> >
> > additionalProperties: false
> >
> > Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
> > Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> > Acked-by: Jacopo Mondi <jacopo@jmondi.org>
> > Signed-off-by: Rob Herring <robh@kernel.org>
> > ---
> > I need acks for dual licensing from the listed maintainers.
> >
> > v3:
> > - Support up to 9 physical lanes
> > - Set lane-polarities array bounds
> > ---
> > .../media/video-interface-devices.yaml | 406 +++++++++++
> > .../bindings/media/video-interfaces.txt | 640 +-----------------
> > .../bindings/media/video-interfaces.yaml | 346 ++++++++++
> > 3 files changed, 753 insertions(+), 639 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/media/video-interface-devices.yaml
> > create mode 100644 Documentation/devicetree/bindings/media/video-interfaces.yaml
> > diff --git a/Documentation/devicetree/bindings/media/video-interfaces.yaml b/Documentation/devicetree/bindings/media/video-interfaces.yaml
> > new file mode 100644
> > index 000000000000..fefca7d98718
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/video-interfaces.yaml
> > @@ -0,0 +1,346 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/video-interfaces.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Common bindings for video receiver and transmitter interface endpoints
> > +
> > +maintainers:
> > + - Guennadi Liakhovetski <g.liakhovetski@gmx.de>
> > + - Sakari Ailus <sakari.ailus@linux.intel.com>
> > +
> > +description: |
> > + Video data pipelines usually consist of external devices, e.g. camera sensors,
> > + controlled over an I2C, SPI or UART bus, and SoC internal IP blocks, including
> > + video DMA engines and video data processors.
> > +
> > + SoC internal blocks are described by DT nodes, placed similarly to other SoC
> > + blocks. External devices are represented as child nodes of their respective
> > + bus controller nodes, e.g. I2C.
> > +
> > + Data interfaces on all video devices are described by their child 'port' nodes.
> > + Configuration of a port depends on other devices participating in the data
> > + transfer and is described by 'endpoint' subnodes.
> > +
> > + device {
> > + ...
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@0 {
> > + ...
> > + endpoint@0 { ... };
> > + endpoint@1 { ... };
> > + };
> > + port@1 { ... };
> > + };
> > + };
> > +
> > + If a port can be configured to work with more than one remote device on the same
> > + bus, an 'endpoint' child node must be provided for each of them. If more than
> > + one port is present in a device node or there is more than one endpoint at a
> > + port, or port node needs to be associated with a selected hardware interface,
> > + a common scheme using '#address-cells', '#size-cells' and 'reg' properties is
> > + used.
> > +
> > + All 'port' nodes can be grouped under optional 'ports' node, which allows to
> > + specify #address-cells, #size-cells properties independently for the 'port'
> > + and 'endpoint' nodes and any child device nodes a device might have.
> > +
> > + Two 'endpoint' nodes are linked with each other through their 'remote-endpoint'
> > + phandles. An endpoint subnode of a device contains all properties needed for
> > + configuration of this device for data exchange with other device. In most
> > + cases properties at the peer 'endpoint' nodes will be identical, however they
> > + might need to be different when there is any signal modifications on the bus
> > + between two devices, e.g. there are logic signal inverters on the lines.
> > +
> > + It is allowed for multiple endpoints at a port to be active simultaneously,
> > + where supported by a device. For example, in case where a data interface of
> > + a device is partitioned into multiple data busses, e.g. 16-bit input port
> > + divided into two separate ITU-R BT.656 8-bit busses. In such case bus-width
> > + and data-shift properties can be used to assign physical data lines to each
> > + endpoint node (logical bus).
> > +
> > + Documenting bindings for devices
> > + --------------------------------
> > +
> > + All required and optional bindings the device supports shall be explicitly
> > + documented in device DT binding documentation. This also includes port and
> > + endpoint nodes for the device, including unit-addresses and reg properties
> > + where relevant.
> > +
> > + Please also see Documentation/devicetree/bindings/graph.txt .
>
> Should this be dropped, or modified to reference the YAML schema for OF
> graph ?
Yeah. A lot of the above I feel is just duplicate of how graphs work,
but I left it as-is.
> > + clock-lanes:
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > + # Assume up to 9 physical lane indices
> > + maximum: 8
> > + description:
> > + Physical clock lane index. Position of an entry determines
>
> s/index/indexes/ (or indices) as there are potentially multiple entries
> (even if in practice, for all bus types we currently support, only one
> clock lane is supported) ?
The original text did say 'array', but there aren't any cases, I can't
really see why or how you'd have more than 1, and it seemed silly to
make it an array type with 'maxItems: 1'. Wouldn't a 2 clock case be
dual interface like we do for DSI?
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Thanks.
Rob
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v3 1/2] media: dt-bindings: Convert video-interfaces.txt properties to schemas
2020-12-18 18:19 ` Rob Herring
@ 2020-12-19 17:10 ` Laurent Pinchart
0 siblings, 0 replies; 21+ messages in thread
From: Laurent Pinchart @ 2020-12-19 17:10 UTC (permalink / raw)
To: Rob Herring
Cc: Guennadi Liakhovetski, Sakari Ailus, Maxime Ripard,
Mauro Carvalho Chehab, Jacopo Mondi, Laurent Pinchart,
devicetree, linux-kernel, linux-media
Hi Rob,
On Fri, Dec 18, 2020 at 12:19:55PM -0600, Rob Herring wrote:
> On Wed, Dec 16, 2020 at 04:52:20PM +0200, Laurent Pinchart wrote:
> > On Thu, Dec 10, 2020 at 03:16:24PM -0600, Rob Herring wrote:
> > > Convert video-interfaces.txt to DT schema. As it contains a mixture of
> > > device level and endpoint properties, split it up into 2 schemas.
> > >
> > > Binding schemas will need to reference both the graph.yaml and
> > > video-interfaces.yaml schemas. The exact schema depends on how many
> > > ports and endpoints for the binding. A single port with a single
> > > endpoint looks similar to this:
> > >
> > > port:
> > > $ref: /schemas/graph.yaml#/$defs/port-base
> > >
> > > properties:
> > > endpoint:
> > > $ref: video-interfaces.yaml#
> > > unevaluatedProperties: false
> > >
> > > properties:
> > > bus-width:
> > > enum: [ 8, 10, 12, 16 ]
> > >
> > > pclk-sample: true
> > > hsync-active: true
> > > vsync-active: true
> > >
> > > required:
> > > - bus-width
> > >
> > > additionalProperties: false
> > >
> > > Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
> > > Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> > > Acked-by: Jacopo Mondi <jacopo@jmondi.org>
> > > Signed-off-by: Rob Herring <robh@kernel.org>
> > > ---
> > > I need acks for dual licensing from the listed maintainers.
> > >
> > > v3:
> > > - Support up to 9 physical lanes
> > > - Set lane-polarities array bounds
> > > ---
> > > .../media/video-interface-devices.yaml | 406 +++++++++++
> > > .../bindings/media/video-interfaces.txt | 640 +-----------------
> > > .../bindings/media/video-interfaces.yaml | 346 ++++++++++
> > > 3 files changed, 753 insertions(+), 639 deletions(-)
> > > create mode 100644 Documentation/devicetree/bindings/media/video-interface-devices.yaml
> > > create mode 100644 Documentation/devicetree/bindings/media/video-interfaces.yaml
>
>
> > > diff --git a/Documentation/devicetree/bindings/media/video-interfaces.yaml b/Documentation/devicetree/bindings/media/video-interfaces.yaml
> > > new file mode 100644
> > > index 000000000000..fefca7d98718
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/media/video-interfaces.yaml
> > > @@ -0,0 +1,346 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/media/video-interfaces.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Common bindings for video receiver and transmitter interface endpoints
> > > +
> > > +maintainers:
> > > + - Guennadi Liakhovetski <g.liakhovetski@gmx.de>
> > > + - Sakari Ailus <sakari.ailus@linux.intel.com>
> > > +
> > > +description: |
> > > + Video data pipelines usually consist of external devices, e.g. camera sensors,
> > > + controlled over an I2C, SPI or UART bus, and SoC internal IP blocks, including
> > > + video DMA engines and video data processors.
> > > +
> > > + SoC internal blocks are described by DT nodes, placed similarly to other SoC
> > > + blocks. External devices are represented as child nodes of their respective
> > > + bus controller nodes, e.g. I2C.
> > > +
> > > + Data interfaces on all video devices are described by their child 'port' nodes.
> > > + Configuration of a port depends on other devices participating in the data
> > > + transfer and is described by 'endpoint' subnodes.
> > > +
> > > + device {
> > > + ...
> > > + ports {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > +
> > > + port@0 {
> > > + ...
> > > + endpoint@0 { ... };
> > > + endpoint@1 { ... };
> > > + };
> > > + port@1 { ... };
> > > + };
> > > + };
> > > +
> > > + If a port can be configured to work with more than one remote device on the same
> > > + bus, an 'endpoint' child node must be provided for each of them. If more than
> > > + one port is present in a device node or there is more than one endpoint at a
> > > + port, or port node needs to be associated with a selected hardware interface,
> > > + a common scheme using '#address-cells', '#size-cells' and 'reg' properties is
> > > + used.
> > > +
> > > + All 'port' nodes can be grouped under optional 'ports' node, which allows to
> > > + specify #address-cells, #size-cells properties independently for the 'port'
> > > + and 'endpoint' nodes and any child device nodes a device might have.
> > > +
> > > + Two 'endpoint' nodes are linked with each other through their 'remote-endpoint'
> > > + phandles. An endpoint subnode of a device contains all properties needed for
> > > + configuration of this device for data exchange with other device. In most
> > > + cases properties at the peer 'endpoint' nodes will be identical, however they
> > > + might need to be different when there is any signal modifications on the bus
> > > + between two devices, e.g. there are logic signal inverters on the lines.
> > > +
> > > + It is allowed for multiple endpoints at a port to be active simultaneously,
> > > + where supported by a device. For example, in case where a data interface of
> > > + a device is partitioned into multiple data busses, e.g. 16-bit input port
> > > + divided into two separate ITU-R BT.656 8-bit busses. In such case bus-width
> > > + and data-shift properties can be used to assign physical data lines to each
> > > + endpoint node (logical bus).
> > > +
> > > + Documenting bindings for devices
> > > + --------------------------------
> > > +
> > > + All required and optional bindings the device supports shall be explicitly
> > > + documented in device DT binding documentation. This also includes port and
> > > + endpoint nodes for the device, including unit-addresses and reg properties
> > > + where relevant.
> > > +
> > > + Please also see Documentation/devicetree/bindings/graph.txt .
> >
> > Should this be dropped, or modified to reference the YAML schema for OF
> > graph ?
>
> Yeah. A lot of the above I feel is just duplicate of how graphs work,
> but I left it as-is.
I meant only the "Please also see ..." sentence.
> > > + clock-lanes:
> > > + $ref: /schemas/types.yaml#/definitions/uint32
> > > + # Assume up to 9 physical lane indices
> > > + maximum: 8
> > > + description:
> > > + Physical clock lane index. Position of an entry determines
> >
> > s/index/indexes/ (or indices) as there are potentially multiple entries
> > (even if in practice, for all bus types we currently support, only one
> > clock lane is supported) ?
>
> The original text did say 'array', but there aren't any cases, I can't
> really see why or how you'd have more than 1, and it seemed silly to
> make it an array type with 'maxItems: 1'. Wouldn't a 2 clock case be
> dual interface like we do for DSI?
For CSI-2, I don't see any use case for multiple clocks in a single
port. C-PHY technically has one clock per data lane, but the clock is
embedded in the data lane, so there's no separate clock lane. Maybe
there will be other bus types in the future that require this, but we
can then care about them when they appear.
> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
> Thanks.
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 21+ messages in thread
end of thread, other threads:[~2020-12-19 17:11 UTC | newest]
Thread overview: 21+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-12-10 21:16 [PATCH v2 0/2] dt-bindings: media: Convert video-interfaces.txt to schemas Rob Herring
2020-12-10 21:16 ` [PATCH v2 1/2] media: dt-bindings: Convert video-interfaces.txt properties " Rob Herring
2020-12-16 10:18 ` Guennadi Liakhovetski
2020-12-16 14:12 ` Rob Herring
2020-12-16 14:24 ` Laurent Pinchart
2020-12-16 15:03 ` Sakari Ailus
2020-12-16 15:06 ` Guennadi Liakhovetski
2020-12-10 21:16 ` [PATCH v2 2/2] dt-bindings: media: Use graph and video-interfaces schemas Rob Herring
2020-12-10 21:16 ` [PATCH v3 0/2] dt-bindings: media: Convert video-interfaces.txt to schemas Rob Herring
2020-12-16 14:22 ` Hans Verkuil
2020-12-10 21:16 ` [PATCH v3 1/2] media: dt-bindings: Convert video-interfaces.txt properties " Rob Herring
2020-12-16 14:52 ` Laurent Pinchart
2020-12-16 21:58 ` Sakari Ailus
2020-12-18 18:19 ` Rob Herring
2020-12-19 17:10 ` Laurent Pinchart
2020-12-10 21:16 ` [PATCH v3 2/2] dt-bindings: media: Use graph and video-interfaces schemas Rob Herring
2020-12-16 15:19 ` Laurent Pinchart
2020-12-16 17:38 ` Rob Herring
2020-12-16 17:43 ` Laurent Pinchart
2020-12-16 21:59 ` Sakari Ailus
2020-12-10 22:39 ` [PATCH v2 0/2] dt-bindings: media: Convert video-interfaces.txt to schemas Rob Herring
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).