[PATCH 12/18] arm64: dts: renesas: beacon: Better describe keys

[Adam Ford <aford173@gmail.com>]

The keys on the baseboard are laid out in an diamond pattern, up, down,
left, right and center.  Update the descriptions to make it easier to
read.

Signed-off-by: Adam Ford <aford173@gmail.com>
---
 .../dts/renesas/beacon-renesom-baseboard.dtsi | 20 +++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
index beaea6de547b..db3ef33faac5 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
@@ -40,38 +40,38 @@ hdmi0_con: endpoint {
 	keys {
 		compatible = "gpio-keys";
 
-		key-1 {
+		key-1 { /* S19 */
 			gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_1>;
-			label = "Switch-1";
+			label = "Up";
 			wakeup-source;
 			debounce-interval = <20>;
 		};
-		key-2 {
+		key-2 { /*S20 */
 			gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_2>;
-			label = "Switch-2";
+			label = "Left";
 			wakeup-source;
 			debounce-interval = <20>;
 		};
-		key-3 {
+		key-3 { /* S21 */
 			gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_3>;
-			label = "Switch-3";
+			label = "Down";
 			wakeup-source;
 			debounce-interval = <20>;
 		};
-		key-4 {
+		key-4 { /* S22 */
 			gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_4>;
-			label = "Switch-4";
+			label = "Right";
 			wakeup-source;
 			debounce-interval = <20>;
 		};
-		key-5 {
+		key-5 { /* S23 */
 			gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_5>;
-			label = "Switch-4";
+			label = "Center";
 			wakeup-source;
 			debounce-interval = <20>;
 		};
-- 
2.25.1