From: Bjorn Helgaas <helgaas@kernel.org>
To: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Alex Deucher <alexdeucher@gmail.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Alex Deucher <alexander.deucher@amd.com>,
Jay Vosburgh <jay.vosburgh@canonical.com>,
Kuppuswamy Sathyanarayanan
<sathyanarayanan.kuppuswamy@linux.intel.com>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Linux Next Mailing List <linux-next@vger.kernel.org>,
Sean V Kelley <sean.v.kelley@intel.com>
Subject: Re: linux-next: manual merge of the amdgpu tree with the pci tree
Date: Mon, 14 Dec 2020 17:16:09 -0600 [thread overview]
Message-ID: <20201214231609.GA266793@bjorn-Precision-5520> (raw)
In-Reply-To: <20201215073431.37720731@canb.auug.org.au>
On Tue, Dec 15, 2020 at 07:34:31AM +1100, Stephen Rothwell wrote:
> Hi all,
>
> On Tue, 8 Dec 2020 13:56:20 +1100 Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> >
> > Today's linux-next merge of the amdgpu tree got a conflict in:
> >
> > drivers/pci/pcie/err.c
> >
> > between commits:
> >
> > 8f1bbfbc3596 ("PCI/ERR: Rename reset_link() to reset_subordinates()")
> > 0791721d8007 ("PCI/ERR: Use "bridge" for clarity in pcie_do_recovery()")
> > 05e9ae19ab83 ("PCI/ERR: Add pci_walk_bridge() to pcie_do_recovery()")
> >
> > from the pci tree and commit:
> >
> > 36a8901e900a ("PCI/ERR: Fix reset logic in pcie_do_recovery() call")
> >
> > from the amdgpu tree.
> >
> > I fixed it up (I think - see below) and can carry the fix as
> > necessary. This is now fixed as far as linux-next is concerned, but any
> > non trivial conflicts should be mentioned to your upstream maintainer
> > when your tree is submitted for merging. You may also want to consider
> > cooperating with the maintainer of the conflicting tree to minimise any
> > particularly complex conflicts.
Huh. It's sub-optimal to change this core code via both the PCI and
the amdgpu tree, with no heads-up to me.
400b308d388a ("PCI/ERR: Fix reset logic in pcie_do_recovery() call")
(apparently in the amdgpu tree) doesn't have a Link: tag to the
posting of the patch, where there was quite a lot of useful discussion
that should be connected somehow.
I think the posting was
https://lore.kernel.org/r/cbba08a5e9ca62778c8937f44eda2192a2045da7.1595617529.git.sathyanarayanan.kuppuswamy@linux.intel.com
I had deferred merging this patch so I could merge Sean's RCEC work
first, and then resolve the conflict when merging *this* patch.
> > diff --cc drivers/pci/pcie/err.c
> > index 510f31f0ef6d,4a2735b70fa6..000000000000
> > --- a/drivers/pci/pcie/err.c
> > +++ b/drivers/pci/pcie/err.c
> > @@@ -146,61 -146,49 +146,82 @@@ out
> > return 0;
> > }
> >
> > +/**
> > + * pci_walk_bridge - walk bridges potentially AER affected
> > + * @bridge: bridge which may be a Port, an RCEC, or an RCiEP
> > + * @cb: callback to be called for each device found
> > + * @userdata: arbitrary pointer to be passed to callback
> > + *
> > + * If the device provided is a bridge, walk the subordinate bus, including
> > + * any bridged devices on buses under this bus. Call the provided callback
> > + * on each device found.
> > + *
> > + * If the device provided has no subordinate bus, e.g., an RCEC or RCiEP,
> > + * call the callback on the device itself.
> > + */
> > +static void pci_walk_bridge(struct pci_dev *bridge,
> > + int (*cb)(struct pci_dev *, void *),
> > + void *userdata)
> > +{
> > + if (bridge->subordinate)
> > + pci_walk_bus(bridge->subordinate, cb, userdata);
> > + else
> > + cb(bridge, userdata);
> > +}
> > +
> > pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
> > - pci_channel_state_t state,
> > - pci_ers_result_t (*reset_link)(struct pci_dev *pdev))
> > + pci_channel_state_t state,
> > + pci_ers_result_t (*reset_subordinates)(struct pci_dev *pdev))
> > {
> > + int type = pci_pcie_type(dev);
> > + struct pci_dev *bridge;
> > pci_ers_result_t status = PCI_ERS_RESULT_CAN_RECOVER;
> > - struct pci_bus *bus;
> > + struct pci_host_bridge *host = pci_find_host_bridge(dev->bus);
> >
> > /*
> > - * Error recovery runs on all subordinates of the first downstream port.
> > - * If the downstream port detected the error, it is cleared at the end.
> > + * If the error was detected by a Root Port, Downstream Port, RCEC,
> > + * or RCiEP, recovery runs on the device itself. For Ports, that
> > + * also includes any subordinate devices.
> > + *
> > + * If it was detected by another device (Endpoint, etc), recovery
> > + * runs on the device and anything else under the same Port, i.e.,
> > + * everything under "bridge".
> > */
> > - if (!(pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT ||
> > - pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM))
> > - dev = dev->bus->self;
> > - bus = dev->subordinate;
> > + if (type == PCI_EXP_TYPE_ROOT_PORT ||
> > + type == PCI_EXP_TYPE_DOWNSTREAM ||
> > + type == PCI_EXP_TYPE_RC_EC ||
> > + type == PCI_EXP_TYPE_RC_END)
> > + bridge = dev;
> > + else
> > + bridge = pci_upstream_bridge(dev);
> >
> > - pci_dbg(dev, "broadcast error_detected message\n");
> > + pci_dbg(bridge, "broadcast error_detected message\n");
> > if (state == pci_channel_io_frozen) {
> > - pci_walk_bus(bus, report_frozen_detected, &status);
> > + pci_walk_bridge(bridge, report_frozen_detected, &status);
> > + /*
> > + * After resetting the link using reset_link() call, the
> > + * possible value of error status is either
> > + * PCI_ERS_RESULT_DISCONNECT (failure case) or
> > + * PCI_ERS_RESULT_NEED_RESET (success case).
> > + * So ignore the return value of report_error_detected()
> > + * call for fatal errors.
> > + *
> > + * In EDR mode, since AER and DPC Capabilities are owned by
> > + * firmware, reported_error_detected() will return error
> > + * status PCI_ERS_RESULT_NO_AER_DRIVER. Continuing
> > + * pcie_do_recovery() with error status as
> > + * PCI_ERS_RESULT_NO_AER_DRIVER will report recovery failure
> > + * irrespective of recovery status. But successful reset_link()
> > + * call usually recovers all fatal errors. So ignoring the
> > + * status result of report_error_detected() also helps EDR based
> > + * error recovery.
> > + */
> > - status = reset_link(dev);
> > + status = reset_subordinates(bridge);
> > - if (status != PCI_ERS_RESULT_RECOVERED) {
> > + if (status == PCI_ERS_RESULT_RECOVERED) {
> > + status = PCI_ERS_RESULT_NEED_RESET;
> > + } else {
> > + status = PCI_ERS_RESULT_DISCONNECT;
> > - pci_warn(dev, "link reset failed\n");
> > + pci_warn(bridge, "subordinate device reset failed\n");
> > goto failed;
> > }
> > } else {
> > @@@ -215,13 -203,25 +236,25 @@@
> >
> > if (status == PCI_ERS_RESULT_NEED_RESET) {
> > /*
> > - * TODO: Should call platform-specific
> > - * functions to reset slot before calling
> > - * drivers' slot_reset callbacks?
> > + * TODO: Optimize the call to pci_reset_bus()
> > + *
> > + * There are two components to pci_reset_bus().
> > + *
> > + * 1. Do platform specific slot/bus reset.
> > + * 2. Save/Restore all devices in the bus.
> > + *
> > + * For hotplug capable devices and fatal errors,
> > + * device is already in reset state due to link
> > + * reset. So repeating platform specific slot/bus
> > + * reset via pci_reset_bus() call is redundant. So
> > + * can optimize this logic and conditionally call
> > + * pci_reset_bus().
> > */
> > + pci_reset_bus(dev);
> > +
> > status = PCI_ERS_RESULT_RECOVERED;
> > - pci_dbg(dev, "broadcast slot_reset message\n");
> > - pci_walk_bus(bus, report_slot_reset, &status);
> > + pci_dbg(bridge, "broadcast slot_reset message\n");
> > + pci_walk_bridge(bridge, report_slot_reset, &status);
> > }
> >
> > if (status != PCI_ERS_RESULT_RECOVERED)
>
> Just a reminder that this conflict still exists (the amdgpu tree commit
> is now 400b308d388a).
>
> --
> Cheers,
> Stephen Rothwell
next prev parent reply other threads:[~2020-12-14 23:19 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-08 2:56 linux-next: manual merge of the amdgpu tree with the pci tree Stephen Rothwell
2020-12-14 20:34 ` Stephen Rothwell
2020-12-14 23:16 ` Bjorn Helgaas [this message]
2020-12-14 23:18 ` Alex Deucher
2020-12-14 23:37 ` Bjorn Helgaas
2020-12-15 6:52 ` Kuppuswamy, Sathyanarayanan
2020-12-15 17:25 ` Bjorn Helgaas
2020-12-15 18:04 ` Alex Deucher
2020-12-15 18:22 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201214231609.GA266793@bjorn-Precision-5520 \
--to=helgaas@kernel.org \
--cc=alexander.deucher@amd.com \
--cc=alexdeucher@gmail.com \
--cc=bhelgaas@google.com \
--cc=jay.vosburgh@canonical.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-next@vger.kernel.org \
--cc=sathyanarayanan.kuppuswamy@linux.intel.com \
--cc=sean.v.kelley@intel.com \
--cc=sfr@canb.auug.org.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).