From: Bert Vermeulen <bert@biot.com>
To: Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Rob Herring <robh+dt@kernel.org>,
Sander Vanheule <sander@svanheule.net>,
linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org
Cc: Bert Vermeulen <bert@biot.com>
Subject: [PATCH v3 2/4] MIPS: Add Realtek RTL838x/RTL839x support as generic MIPS system
Date: Wed, 30 Dec 2020 22:22:03 +0100 [thread overview]
Message-ID: <20201230212205.2605383-2-bert@biot.com> (raw)
In-Reply-To: <20201230212205.2605383-1-bert@biot.com>
This is just enough system to boot the kernel with earlycon working.
Signed-off-by: Bert Vermeulen <bert@biot.com>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
---
arch/mips/Kconfig | 21 ++++++++++++++++++
arch/mips/generic/Platform | 1 +
arch/mips/include/asm/realtek/ioremap.h | 29 +++++++++++++++++++++++++
3 files changed, 51 insertions(+)
create mode 100644 arch/mips/include/asm/realtek/ioremap.h
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 0a17bedf4f0d..0986d0c4405f 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -627,6 +627,27 @@ config RALINK
select ARCH_HAS_RESET_CONTROLLER
select RESET_CONTROLLER
+config MACH_REALTEK_RTL
+ bool "Realtek RTL838x/RTL839x based machines"
+ select MIPS_GENERIC
+ select DMA_NONCOHERENT
+ select IRQ_MIPS_CPU
+ select CSRC_R4K
+ select CEVT_R4K
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_MIPS16
+ select SYS_SUPPORTS_MULTITHREADING
+ select SYS_SUPPORTS_VPE_LOADER
+ select SYS_HAS_EARLY_PRINTK
+ select SYS_HAS_EARLY_PRINTK_8250
+ select USE_GENERIC_EARLY_PRINTK_8250
+ select BOOT_RAW
+ select PINCTRL
+ select USE_OF
+
config SGI_IP22
bool "SGI IP22 (Indy/Indigo2)"
select ARC_MEMORY
diff --git a/arch/mips/generic/Platform b/arch/mips/generic/Platform
index b871af16b5b6..5dff52295b0a 100644
--- a/arch/mips/generic/Platform
+++ b/arch/mips/generic/Platform
@@ -10,6 +10,7 @@
# Note: order matters, keep the asm/mach-generic include last.
cflags-$(CONFIG_MACH_INGENIC_SOC) += -I$(srctree)/arch/mips/include/asm/mach-ingenic
+cflags-$(CONFIG_MACH_REALTEK_RTL) += -I$(srctree)/arch/mips/include/asm/realtek
cflags-$(CONFIG_MIPS_GENERIC) += -I$(srctree)/arch/mips/include/asm/mach-generic
load-$(CONFIG_MIPS_GENERIC) += 0xffffffff80100000
diff --git a/arch/mips/include/asm/realtek/ioremap.h b/arch/mips/include/asm/realtek/ioremap.h
new file mode 100644
index 000000000000..ea51af023e26
--- /dev/null
+++ b/arch/mips/include/asm/realtek/ioremap.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _REALTEK_RTL_IOREMAP_H_
+#define _REALTEK_RTL_IOREMAP_H_
+
+static inline int is_rtl8380_internal_registers(phys_addr_t offset)
+{
+ /* IO Block */
+ if (offset >= 0xb8000000 && offset < 0xb9000000)
+ return 1;
+ /* Switch block */
+ if (offset >= 0xbb000000 && offset < 0xbc000000)
+ return 1;
+ return 0;
+}
+
+static inline void __iomem *plat_ioremap(phys_addr_t offset, unsigned long size,
+ unsigned long flags)
+{
+ if (is_rtl8380_internal_registers(offset))
+ return (void __iomem *)offset;
+ return NULL;
+}
+
+static inline int plat_iounmap(const volatile void __iomem *addr)
+{
+ return is_rtl8380_internal_registers((unsigned long)addr);
+}
+
+#endif /* _REALTEK_RTL_IOREMAP_H_ */
--
2.25.1
next prev parent reply other threads:[~2020-12-30 21:24 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-30 21:22 [PATCH v3 1/4] Add support for Realtek RTL838x/RTL839x switch SoCs Bert Vermeulen
2020-12-30 21:22 ` Bert Vermeulen [this message]
2021-01-05 10:20 ` [PATCH v3 2/4] MIPS: Add Realtek RTL838x/RTL839x support as generic MIPS system Thomas Bogendoerfer
2020-12-30 21:22 ` [PATCH v3 3/4] dt-bindings: Add Cisco prefix to vendor list Bert Vermeulen
2021-01-11 22:01 ` Rob Herring
2020-12-30 21:22 ` [PATCH v3 4/4] dts: Add support for Cisco SG220-26 switch Bert Vermeulen
2020-12-30 21:26 ` [PATCH v3 1/4] Add support for Realtek RTL838x/RTL839x switch SoCs Bert Vermeulen
2021-01-11 21:59 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201230212205.2605383-2-bert@biot.com \
--to=bert@biot.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=sander@svanheule.net \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).