From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-16.8 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED,USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id CF1C3C43332 for ; Thu, 31 Dec 2020 14:31:15 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id B2D05223E8 for ; Thu, 31 Dec 2020 14:31:15 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727202AbgLaObJ (ORCPT ); Thu, 31 Dec 2020 09:31:09 -0500 Received: from relay12.mail.gandi.net ([217.70.178.232]:40919 "EHLO relay12.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727094AbgLaObH (ORCPT ); Thu, 31 Dec 2020 09:31:07 -0500 Received: from localhost.localdomain (196.109.29.93.rev.sfr.net [93.29.109.196]) (Authenticated sender: paul.kocialkowski@bootlin.com) by relay12.mail.gandi.net (Postfix) with ESMTPSA id 98B7F200007; Thu, 31 Dec 2020 14:30:21 +0000 (UTC) From: Paul Kocialkowski To: linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org, devel@driverdev.osuosl.org, linux-sunxi@googlegroups.com Cc: Yong Deng , Mauro Carvalho Chehab , Rob Herring , Maxime Ripard , Chen-Yu Tsai , Jernej Skrabec , Paul Kocialkowski , Jonathan Corbet , Kishon Vijay Abraham I , Vinod Koul , Helen Koike , Dafna Hirschfeld , Greg Kroah-Hartman , Philipp Zabel , Sakari Ailus , Hans Verkuil , Thomas Petazzoni , kevin.lhopital@hotmail.com Subject: [PATCH v4 09/15] media: sunxi: Add support for the A31 MIPI CSI-2 controller Date: Thu, 31 Dec 2020 15:29:42 +0100 Message-Id: <20201231142948.3241780-10-paul.kocialkowski@bootlin.com> X-Mailer: git-send-email 2.29.2 In-Reply-To: <20201231142948.3241780-1-paul.kocialkowski@bootlin.com> References: <20201231142948.3241780-1-paul.kocialkowski@bootlin.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The A31 MIPI CSI-2 controller is a dedicated MIPI CSI-2 bridge found on Allwinner SoCs such as the A31 and V3/V3s. It is a standalone block, connected to the CSI controller on one side and to the MIPI D-PHY block on the other. It has a dedicated address space, interrupt line and clock. It is represented as a V4L2 subdev to the CSI controller and takes a MIPI CSI-2 sensor as its own subdev, all using the fwnode graph and media controller API. Only 8-bit and 10-bit Bayer formats are currently supported. While up to 4 internal channels to the CSI controller exist, only one is currently supported by this implementation. Signed-off-by: Paul Kocialkowski --- drivers/media/platform/sunxi/Kconfig | 1 + drivers/media/platform/sunxi/Makefile | 1 + .../platform/sunxi/sun6i-mipi-csi2/Kconfig | 12 + .../platform/sunxi/sun6i-mipi-csi2/Makefile | 4 + .../sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c | 590 ++++++++++++++++++ .../sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.h | 117 ++++ 6 files changed, 725 insertions(+) create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/Kconfig create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/Makefile create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.h diff --git a/drivers/media/platform/sunxi/Kconfig b/drivers/media/platform/sunxi/Kconfig index 7151cc249afa..9684e07454ad 100644 --- a/drivers/media/platform/sunxi/Kconfig +++ b/drivers/media/platform/sunxi/Kconfig @@ -2,3 +2,4 @@ source "drivers/media/platform/sunxi/sun4i-csi/Kconfig" source "drivers/media/platform/sunxi/sun6i-csi/Kconfig" +source "drivers/media/platform/sunxi/sun6i-mipi-csi2/Kconfig" diff --git a/drivers/media/platform/sunxi/Makefile b/drivers/media/platform/sunxi/Makefile index fc537c9f5ca9..887a7cae8fca 100644 --- a/drivers/media/platform/sunxi/Makefile +++ b/drivers/media/platform/sunxi/Makefile @@ -2,5 +2,6 @@ obj-y += sun4i-csi/ obj-y += sun6i-csi/ +obj-y += sun6i-mipi-csi2/ obj-y += sun8i-di/ obj-y += sun8i-rotate/ diff --git a/drivers/media/platform/sunxi/sun6i-mipi-csi2/Kconfig b/drivers/media/platform/sunxi/sun6i-mipi-csi2/Kconfig new file mode 100644 index 000000000000..47f1bb0779a8 --- /dev/null +++ b/drivers/media/platform/sunxi/sun6i-mipi-csi2/Kconfig @@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0-only +config VIDEO_SUN6I_MIPI_CSI2 + tristate "Allwinner A31 MIPI CSI-2 Controller Driver" + depends on ARCH_SUNXI || COMPILE_TEST + depends on PM && COMMON_CLK && VIDEO_V4L2 + select REGMAP_MMIO + select PHY_SUN6I_MIPI_DPHY + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select V4L2_FWNODE + help + Support for the Allwinner A31 MIPI CSI-2 Controller. diff --git a/drivers/media/platform/sunxi/sun6i-mipi-csi2/Makefile b/drivers/media/platform/sunxi/sun6i-mipi-csi2/Makefile new file mode 100644 index 000000000000..14e4e03818b5 --- /dev/null +++ b/drivers/media/platform/sunxi/sun6i-mipi-csi2/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only +sun6i-mipi-csi2-y += sun6i_mipi_csi2.o + +obj-$(CONFIG_VIDEO_SUN6I_MIPI_CSI2) += sun6i-mipi-csi2.o diff --git a/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c b/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c new file mode 100644 index 000000000000..87307beda4cf --- /dev/null +++ b/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c @@ -0,0 +1,590 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2020 Bootlin + * Author: Paul Kocialkowski + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "sun6i_mipi_csi2.h" + +#define MODULE_NAME "sun6i-mipi-csi2" + +static const u32 sun6i_mipi_csi2_mbus_codes[] = { + MEDIA_BUS_FMT_SBGGR8_1X8, + MEDIA_BUS_FMT_SGBRG8_1X8, + MEDIA_BUS_FMT_SGRBG8_1X8, + MEDIA_BUS_FMT_SRGGB8_1X8, + MEDIA_BUS_FMT_SBGGR10_1X10, + MEDIA_BUS_FMT_SGBRG10_1X10, + MEDIA_BUS_FMT_SGRBG10_1X10, + MEDIA_BUS_FMT_SRGGB10_1X10, +}; + +/* Video */ + +static int sun6i_mipi_csi2_s_stream(struct v4l2_subdev *subdev, int on) +{ + struct sun6i_mipi_csi2_video *video = + sun6i_mipi_csi2_subdev_video(subdev); + struct sun6i_mipi_csi2_dev *cdev = sun6i_mipi_csi2_video_dev(video); + struct v4l2_subdev *remote_subdev = video->remote_subdev; + struct v4l2_fwnode_bus_mipi_csi2 *bus_mipi_csi2 = + &video->endpoint.bus.mipi_csi2; + union phy_configure_opts dphy_opts = { 0 }; + struct phy_configure_opts_mipi_dphy *dphy_cfg = &dphy_opts.mipi_dphy; + struct regmap *regmap = cdev->regmap; + struct v4l2_ctrl *ctrl; + unsigned int lanes_count; + unsigned int bpp; + unsigned long pixel_rate; + u8 data_type = 0; + u32 version = 0; + /* Initialize to 0 to use both in disable label (ret != 0) and off. */ + int ret = 0; + + if (!remote_subdev) + return -ENODEV; + + if (!on) { + v4l2_subdev_call(remote_subdev, video, s_stream, 0); + goto disable; + } + + switch (video->mbus_format.code) { + case MEDIA_BUS_FMT_SBGGR8_1X8: + case MEDIA_BUS_FMT_SGBRG8_1X8: + case MEDIA_BUS_FMT_SGRBG8_1X8: + case MEDIA_BUS_FMT_SRGGB8_1X8: + data_type = MIPI_CSI2_DATA_TYPE_RAW8; + bpp = 8; + break; + case MEDIA_BUS_FMT_SBGGR10_1X10: + case MEDIA_BUS_FMT_SGBRG10_1X10: + case MEDIA_BUS_FMT_SGRBG10_1X10: + case MEDIA_BUS_FMT_SRGGB10_1X10: + data_type = MIPI_CSI2_DATA_TYPE_RAW10; + bpp = 10; + break; + default: + return -EINVAL; + } + + /* Sensor pixel rate */ + + ctrl = v4l2_ctrl_find(remote_subdev->ctrl_handler, V4L2_CID_PIXEL_RATE); + if (!ctrl) { + dev_err(cdev->dev, + "%s: no MIPI CSI-2 pixel rate from the sensor\n", + __func__); + return -ENODEV; + } + + pixel_rate = (unsigned long)v4l2_ctrl_g_ctrl_int64(ctrl); + if (!pixel_rate) { + dev_err(cdev->dev, + "%s: zero MIPI CSI-2 pixel rate from the sensor\n", + __func__); + return -ENODEV; + } + + /* Power management */ + + ret = pm_runtime_get_sync(cdev->dev); + if (ret < 0) { + pm_runtime_put_noidle(cdev->dev); + return ret; + } + + /* D-PHY configuration */ + + lanes_count = bus_mipi_csi2->num_data_lanes; + phy_mipi_dphy_get_default_config(pixel_rate, bpp, lanes_count, + dphy_cfg); + + /* + * Note that our hardware is using DDR, which is not taken in account by + * phy_mipi_dphy_get_default_config when calculating hs_clk_rate from + * the pixel rate, lanes count and bpp. + * + * The resulting clock rate is basically the symbol rate over the whole + * link. The actual clock rate is calculated with division by two since + * DDR samples both on rising and falling edges. + */ + + dev_dbg(cdev->dev, "A31 MIPI CSI-2 config:\n"); + dev_dbg(cdev->dev, "%ld pixels/s, %u bits/pixel, %lu Hz clock\n", + pixel_rate, bpp, dphy_cfg->hs_clk_rate / 2); + + ret = phy_reset(cdev->dphy); + if (ret) { + dev_err(cdev->dev, "failed to reset MIPI D-PHY\n"); + goto error_pm; + } + + ret = phy_set_mode_ext(cdev->dphy, PHY_MODE_MIPI_DPHY, + PHY_MIPI_DPHY_SUBMODE_RX); + if (ret) { + dev_err(cdev->dev, "failed to set MIPI D-PHY mode\n"); + goto error_pm; + } + + ret = phy_configure(cdev->dphy, &dphy_opts); + if (ret) { + dev_err(cdev->dev, "failed to configure MIPI D-PHY\n"); + goto error_pm; + } + + ret = phy_power_on(cdev->dphy); + if (ret) { + dev_err(cdev->dev, "failed to power on MIPI D-PHY\n"); + goto error_pm; + } + + /* MIPI CSI-2 controller setup */ + + /* + * The enable flow in the Allwinner BSP is a bit different: the enable + * and reset bits are set together before starting the CSI controller. + * + * In mainline we enable the CSI controller first (due to subdev logic). + * One reliable way to make this work is to deassert reset, configure + * registers and enable the controller when everything's ready. + * + * However, setting the version enable bit and removing it afterwards + * appears necessary for capture to work reliably, while replacing it + * with a delay doesn't do the trick. + */ + regmap_write(regmap, SUN6I_MIPI_CSI2_CTL_REG, + SUN6I_MIPI_CSI2_CTL_RESET_N | + SUN6I_MIPI_CSI2_CTL_VERSION_EN | + SUN6I_MIPI_CSI2_CTL_UNPK_EN); + + regmap_read(regmap, SUN6I_MIPI_CSI2_VERSION_REG, &version); + + regmap_update_bits(regmap, SUN6I_MIPI_CSI2_CTL_REG, + SUN6I_MIPI_CSI2_CTL_VERSION_EN, 0); + + dev_dbg(cdev->dev, "A31 MIPI CSI-2 version: %04x\n", version); + + regmap_write(regmap, SUN6I_MIPI_CSI2_CFG_REG, + SUN6I_MIPI_CSI2_CFG_CHANNEL_MODE(1) | + SUN6I_MIPI_CSI2_CFG_LANE_COUNT(lanes_count)); + + /* + * Our MIPI CSI-2 controller has internal channels that can be + * configured to match a specific MIPI CSI-2 virtual channel and/or + * a specific data type. Each internal channel can be piped to an + * internal channel of the CSI controller. + * + * We set virtual channel numbers to all channels to make sure that + * virtual channel 0 goes to CSI channel 0 only. + */ + regmap_write(regmap, SUN6I_MIPI_CSI2_VCDT_RX_REG, + SUN6I_MIPI_CSI2_VCDT_RX_CH_VC(3, 3) | + SUN6I_MIPI_CSI2_VCDT_RX_CH_VC(2, 2) | + SUN6I_MIPI_CSI2_VCDT_RX_CH_VC(1, 1) | + SUN6I_MIPI_CSI2_VCDT_RX_CH_VC(0, 0) | + SUN6I_MIPI_CSI2_VCDT_RX_CH_DT(0, data_type)); + + regmap_update_bits(regmap, SUN6I_MIPI_CSI2_CTL_REG, + SUN6I_MIPI_CSI2_CTL_EN, SUN6I_MIPI_CSI2_CTL_EN); + + ret = v4l2_subdev_call(remote_subdev, video, s_stream, 1); + if (ret) + goto disable; + + return 0; + +disable: + regmap_update_bits(regmap, SUN6I_MIPI_CSI2_CTL_REG, + SUN6I_MIPI_CSI2_CTL_EN, 0); + + phy_power_off(cdev->dphy); + +error_pm: + pm_runtime_put(cdev->dev); + + return ret; +} + +static const struct v4l2_subdev_video_ops sun6i_mipi_csi2_subdev_video_ops = { + .s_stream = sun6i_mipi_csi2_s_stream, +}; + +/* Pad */ + +static int +sun6i_mipi_csi2_enum_mbus_code(struct v4l2_subdev *subdev, + struct v4l2_subdev_pad_config *config, + struct v4l2_subdev_mbus_code_enum *code_enum) +{ + if (code_enum->index >= ARRAY_SIZE(sun6i_mipi_csi2_mbus_codes)) + return -EINVAL; + + code_enum->code = sun6i_mipi_csi2_mbus_codes[code_enum->index]; + + return 0; +} + +static int sun6i_mipi_csi2_get_fmt(struct v4l2_subdev *subdev, + struct v4l2_subdev_pad_config *config, + struct v4l2_subdev_format *format) +{ + struct sun6i_mipi_csi2_video *video = + sun6i_mipi_csi2_subdev_video(subdev); + struct v4l2_mbus_framefmt *mbus_format = &format->format; + + if (format->which == V4L2_SUBDEV_FORMAT_TRY) + *mbus_format = *v4l2_subdev_get_try_format(subdev, config, + format->pad); + else + *mbus_format = video->mbus_format; + + return 0; +} + +static int sun6i_mipi_csi2_set_fmt(struct v4l2_subdev *subdev, + struct v4l2_subdev_pad_config *config, + struct v4l2_subdev_format *format) +{ + struct sun6i_mipi_csi2_video *video = + sun6i_mipi_csi2_subdev_video(subdev); + struct v4l2_mbus_framefmt *mbus_format = &format->format; + + if (format->which == V4L2_SUBDEV_FORMAT_TRY) + *v4l2_subdev_get_try_format(subdev, config, format->pad) = + *mbus_format; + else + video->mbus_format = *mbus_format; + + return 0; +} + +static const struct v4l2_subdev_pad_ops sun6i_mipi_csi2_subdev_pad_ops = { + .enum_mbus_code = sun6i_mipi_csi2_enum_mbus_code, + .get_fmt = sun6i_mipi_csi2_get_fmt, + .set_fmt = sun6i_mipi_csi2_set_fmt, +}; + +/* Subdev */ + +static const struct v4l2_subdev_ops sun6i_mipi_csi2_subdev_ops = { + .video = &sun6i_mipi_csi2_subdev_video_ops, + .pad = &sun6i_mipi_csi2_subdev_pad_ops, +}; + +/* Notifier */ + +static int +sun6i_mipi_csi2_notifier_bound(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *remote_subdev, + struct v4l2_async_subdev *remote_subdev_async) +{ + struct v4l2_subdev *subdev = notifier->sd; + struct sun6i_mipi_csi2_video *video = + sun6i_mipi_csi2_subdev_video(subdev); + struct sun6i_mipi_csi2_dev *cdev = sun6i_mipi_csi2_video_dev(video); + int source_pad; + int ret; + + source_pad = media_entity_get_fwnode_pad(&remote_subdev->entity, + remote_subdev->fwnode, + MEDIA_PAD_FL_SOURCE); + if (source_pad < 0) + return source_pad; + + ret = media_create_pad_link(&remote_subdev->entity, source_pad, + &subdev->entity, 0, + MEDIA_LNK_FL_ENABLED | + MEDIA_LNK_FL_IMMUTABLE); + if (ret) { + dev_err(cdev->dev, "failed to create %s:%u -> %s:%u link\n", + remote_subdev->entity.name, source_pad, + subdev->entity.name, 0); + return ret; + } + + video->remote_subdev = remote_subdev; + + return 0; +} + +static const +struct v4l2_async_notifier_operations sun6i_mipi_csi2_notifier_ops = { + .bound = sun6i_mipi_csi2_notifier_bound, +}; + +/* Media Entity */ + +static const struct media_entity_operations sun6i_mipi_csi2_entity_ops = { + .link_validate = v4l2_subdev_link_validate, +}; + +/* Base Driver */ + +static int sun6i_mipi_csi2_suspend(struct device *dev) +{ + struct sun6i_mipi_csi2_dev *cdev = dev_get_drvdata(dev); + + clk_disable_unprepare(cdev->clk_mod); + clk_disable_unprepare(cdev->clk_bus); + reset_control_assert(cdev->reset); + + return 0; +} + +static int sun6i_mipi_csi2_resume(struct device *dev) +{ + struct sun6i_mipi_csi2_dev *cdev = dev_get_drvdata(dev); + int ret; + + ret = reset_control_deassert(cdev->reset); + if (ret) { + dev_err(cdev->dev, "failed to deassert reset\n"); + return ret; + } + + ret = clk_prepare_enable(cdev->clk_bus); + if (ret) { + dev_err(cdev->dev, "failed to enable bus clock\n"); + goto error_reset; + } + + ret = clk_prepare_enable(cdev->clk_mod); + if (ret) { + dev_err(cdev->dev, "failed to enable module clock\n"); + goto error_clk_bus; + } + + return 0; + +error_clk_bus: + clk_disable_unprepare(cdev->clk_bus); + +error_reset: + reset_control_assert(cdev->reset); + + return ret; +} + +static int sun6i_mipi_csi2_v4l2_setup(struct sun6i_mipi_csi2_dev *cdev) +{ + struct sun6i_mipi_csi2_video *video = &cdev->video; + struct v4l2_subdev *subdev = &video->subdev; + struct v4l2_async_notifier *notifier = &video->notifier; + struct fwnode_handle *handle; + struct v4l2_fwnode_endpoint *endpoint; + struct v4l2_async_subdev *subdev_async; + int ret; + + /* Subdev */ + + v4l2_subdev_init(subdev, &sun6i_mipi_csi2_subdev_ops); + subdev->dev = cdev->dev; + subdev->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + strscpy(subdev->name, MODULE_NAME, sizeof(subdev->name)); + v4l2_set_subdevdata(subdev, cdev); + + /* Entity */ + + subdev->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; + subdev->entity.ops = &sun6i_mipi_csi2_entity_ops; + + /* Pads */ + + video->pads[0].flags = MEDIA_PAD_FL_SINK; + video->pads[1].flags = MEDIA_PAD_FL_SOURCE; + + ret = media_entity_pads_init(&subdev->entity, 2, video->pads); + if (ret) + return ret; + + /* Endpoint */ + + handle = fwnode_graph_get_endpoint_by_id(dev_fwnode(cdev->dev), 0, 0, + FWNODE_GRAPH_ENDPOINT_NEXT); + if (!handle) { + ret = -ENODEV; + goto error_media_entity; + } + + endpoint = &video->endpoint; + endpoint->bus_type = V4L2_MBUS_CSI2_DPHY; + + ret = v4l2_fwnode_endpoint_parse(handle, endpoint); + fwnode_handle_put(handle); + if (ret) + goto error_media_entity; + + /* Notifier */ + + v4l2_async_notifier_init(notifier); + + subdev_async = &video->subdev_async; + ret = v4l2_async_notifier_add_fwnode_remote_subdev(notifier, handle, + subdev_async); + if (ret) + goto error_media_entity; + + video->notifier.ops = &sun6i_mipi_csi2_notifier_ops; + + ret = v4l2_async_subdev_notifier_register(subdev, notifier); + if (ret < 0) + goto error_notifier; + + /* Subdev */ + + ret = v4l2_async_register_subdev(subdev); + if (ret < 0) + goto error_notifier_registered; + + /* Runtime PM */ + + pm_runtime_enable(cdev->dev); + pm_runtime_set_suspended(cdev->dev); + + return 0; + +error_notifier_registered: + v4l2_async_notifier_unregister(notifier); +error_notifier: + v4l2_async_notifier_cleanup(notifier); +error_media_entity: + media_entity_cleanup(&subdev->entity); + + return ret; +} + +static int sun6i_mipi_csi2_v4l2_teardown(struct sun6i_mipi_csi2_dev *cdev) +{ + struct sun6i_mipi_csi2_video *video = &cdev->video; + struct v4l2_subdev *subdev = &video->subdev; + struct v4l2_async_notifier *notifier = &video->notifier; + + v4l2_async_unregister_subdev(subdev); + v4l2_async_notifier_unregister(notifier); + v4l2_async_notifier_cleanup(notifier); + media_entity_cleanup(&subdev->entity); + v4l2_device_unregister_subdev(subdev); + + return 0; +} + +static const struct regmap_config sun6i_mipi_csi2_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .max_register = 0x400, +}; + +static int sun6i_mipi_csi2_probe(struct platform_device *pdev) +{ + struct sun6i_mipi_csi2_dev *cdev; + struct resource *res; + void __iomem *io_base; + int ret; + + cdev = devm_kzalloc(&pdev->dev, sizeof(*cdev), GFP_KERNEL); + if (!cdev) + return -ENOMEM; + + cdev->dev = &pdev->dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + io_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(io_base)) + return PTR_ERR(io_base); + + cdev->regmap = devm_regmap_init_mmio(&pdev->dev, io_base, + &sun6i_mipi_csi2_regmap_config); + if (IS_ERR(cdev->regmap)) { + dev_err(&pdev->dev, "failed to init register map\n"); + return PTR_ERR(cdev->regmap); + } + + cdev->clk_bus = devm_clk_get(&pdev->dev, "bus"); + if (IS_ERR(cdev->clk_bus)) { + dev_err(&pdev->dev, "failed to acquire bus clock\n"); + return PTR_ERR(cdev->clk_bus); + } + + cdev->clk_mod = devm_clk_get(&pdev->dev, "mod"); + if (IS_ERR(cdev->clk_mod)) { + dev_err(&pdev->dev, "failed to acquire mod clock\n"); + return PTR_ERR(cdev->clk_mod); + } + + cdev->reset = devm_reset_control_get_shared(&pdev->dev, NULL); + if (IS_ERR(cdev->reset)) { + dev_err(&pdev->dev, "failed to get reset controller\n"); + return PTR_ERR(cdev->reset); + } + + cdev->dphy = devm_phy_get(&pdev->dev, NULL); + if (IS_ERR(cdev->dphy)) { + dev_err(&pdev->dev, "failed to get the MIPI D-PHY\n"); + return PTR_ERR(cdev->dphy); + } + + ret = phy_init(cdev->dphy); + if (ret) { + dev_err(&pdev->dev, "failed to initialize the MIPI D-PHY\n"); + return ret; + } + + platform_set_drvdata(pdev, cdev); + + ret = sun6i_mipi_csi2_v4l2_setup(cdev); + if (ret) + return ret; + + return 0; +} + +static int sun6i_mipi_csi2_remove(struct platform_device *pdev) +{ + struct sun6i_mipi_csi2_dev *cdev = platform_get_drvdata(pdev); + + phy_exit(cdev->dphy); + + return sun6i_mipi_csi2_v4l2_teardown(cdev); +} + +static const struct dev_pm_ops sun6i_mipi_csi2_pm_ops = { + SET_RUNTIME_PM_OPS(sun6i_mipi_csi2_suspend, sun6i_mipi_csi2_resume, + NULL) +}; + +static const struct of_device_id sun6i_mipi_csi2_of_match[] = { + { .compatible = "allwinner,sun6i-a31-mipi-csi2" }, + {}, +}; +MODULE_DEVICE_TABLE(of, sun6i_mipi_csi2_of_match); + +static struct platform_driver sun6i_mipi_csi2_platform_driver = { + .probe = sun6i_mipi_csi2_probe, + .remove = sun6i_mipi_csi2_remove, + .driver = { + .name = MODULE_NAME, + .of_match_table = of_match_ptr(sun6i_mipi_csi2_of_match), + .pm = &sun6i_mipi_csi2_pm_ops, + }, +}; +module_platform_driver(sun6i_mipi_csi2_platform_driver); + +MODULE_DESCRIPTION("Allwinner A31 MIPI CSI-2 Controller Driver"); +MODULE_AUTHOR("Paul Kocialkowski "); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.h b/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.h new file mode 100644 index 000000000000..0869dc7db3b5 --- /dev/null +++ b/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.h @@ -0,0 +1,117 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2020 Bootlin + * Author: Paul Kocialkowski + */ + +#ifndef __SUN6I_MIPI_CSI2_H__ +#define __SUN6I_MIPI_CSI2_H__ + +#include +#include +#include +#include +#include + +#define SUN6I_MIPI_CSI2_CTL_REG 0x0 +#define SUN6I_MIPI_CSI2_CTL_RESET_N BIT(31) +#define SUN6I_MIPI_CSI2_CTL_VERSION_EN BIT(30) +#define SUN6I_MIPI_CSI2_CTL_UNPK_EN BIT(1) +#define SUN6I_MIPI_CSI2_CTL_EN BIT(0) +#define SUN6I_MIPI_CSI2_CFG_REG 0x4 +#define SUN6I_MIPI_CSI2_CFG_CHANNEL_MODE(v) ((((v) - 1) << 8) & \ + GENMASK(9, 8)) +#define SUN6I_MIPI_CSI2_CFG_LANE_COUNT(v) (((v) - 1) & GENMASK(1, 0)) +#define SUN6I_MIPI_CSI2_VCDT_RX_REG 0x8 +#define SUN6I_MIPI_CSI2_VCDT_RX_CH_VC(ch, vc) (((vc) & GENMASK(1, 0)) << \ + ((ch) * 8 + 6)) +#define SUN6I_MIPI_CSI2_VCDT_RX_CH_DT(ch, t) (((t) & GENMASK(5, 0)) << \ + ((ch) * 8)) +#define SUN6I_MIPI_CSI2_RX_PKT_NUM_REG 0xc + +#define SUN6I_MIPI_CSI2_VERSION_REG 0x3c + +#define SUN6I_MIPI_CSI2_CH_BASE 0x1000 +#define SUN6I_MIPI_CSI2_CH_OFFSET 0x100 + +#define SUN6I_MIPI_CSI2_CH_CFG_REG 0x40 +#define SUN6I_MIPI_CSI2_CH_INT_EN_REG 0x50 +#define SUN6I_MIPI_CSI2_CH_INT_EN_EOT_ERR BIT(29) +#define SUN6I_MIPI_CSI2_CH_INT_EN_CHKSUM_ERR BIT(28) +#define SUN6I_MIPI_CSI2_CH_INT_EN_ECC_WRN BIT(27) +#define SUN6I_MIPI_CSI2_CH_INT_EN_ECC_ERR BIT(26) +#define SUN6I_MIPI_CSI2_CH_INT_EN_LINE_SYNC_ERR BIT(25) +#define SUN6I_MIPI_CSI2_CH_INT_EN_FRAME_SYNC_ERR BIT(24) +#define SUN6I_MIPI_CSI2_CH_INT_EN_EMB_DATA BIT(18) +#define SUN6I_MIPI_CSI2_CH_INT_EN_PF BIT(17) +#define SUN6I_MIPI_CSI2_CH_INT_EN_PH_UPDATE BIT(16) +#define SUN6I_MIPI_CSI2_CH_INT_EN_LINE_START_SYNC BIT(11) +#define SUN6I_MIPI_CSI2_CH_INT_EN_LINE_END_SYNC BIT(10) +#define SUN6I_MIPI_CSI2_CH_INT_EN_FRAME_START_SYNC BIT(9) +#define SUN6I_MIPI_CSI2_CH_INT_EN_FRAME_END_SYNC BIT(8) +#define SUN6I_MIPI_CSI2_CH_INT_EN_FIFO_OVER BIT(0) + +#define SUN6I_MIPI_CSI2_CH_INT_PD_REG 0x58 +#define SUN6I_MIPI_CSI2_CH_INT_PD_EOT_ERR BIT(29) +#define SUN6I_MIPI_CSI2_CH_INT_PD_CHKSUM_ERR BIT(28) +#define SUN6I_MIPI_CSI2_CH_INT_PD_ECC_WRN BIT(27) +#define SUN6I_MIPI_CSI2_CH_INT_PD_ECC_ERR BIT(26) +#define SUN6I_MIPI_CSI2_CH_INT_PD_LINE_SYNC_ERR BIT(25) +#define SUN6I_MIPI_CSI2_CH_INT_PD_FRAME_SYNC_ERR BIT(24) +#define SUN6I_MIPI_CSI2_CH_INT_PD_EMB_DATA BIT(18) +#define SUN6I_MIPI_CSI2_CH_INT_PD_PF BIT(17) +#define SUN6I_MIPI_CSI2_CH_INT_PD_PH_UPDATE BIT(16) +#define SUN6I_MIPI_CSI2_CH_INT_PD_LINE_START_SYNC BIT(11) +#define SUN6I_MIPI_CSI2_CH_INT_PD_LINE_END_SYNC BIT(10) +#define SUN6I_MIPI_CSI2_CH_INT_PD_FRAME_START_SYNC BIT(9) +#define SUN6I_MIPI_CSI2_CH_INT_PD_FRAME_END_SYNC BIT(8) +#define SUN6I_MIPI_CSI2_CH_INT_PD_FIFO_OVER BIT(0) + +#define SUN6I_MIPI_CSI2_CH_DT_TRIGGER_REG 0x60 +#define SUN6I_MIPI_CSI2_CH_CUR_PH_REG 0x70 +#define SUN6I_MIPI_CSI2_CH_ECC_REG 0x74 +#define SUN6I_MIPI_CSI2_CH_CKS_REG 0x78 +#define SUN6I_MIPI_CSI2_CH_FRAME_NUM_REG 0x7c +#define SUN6I_MIPI_CSI2_CH_LINE_NUM_REG 0x80 + +#define SUN6I_MIPI_CSI2_CH_REG(reg, ch) \ + (SUN6I_MIPI_CSI2_CH_BASE + SUN6I_MIPI_CSI2_CH_OFFSET * (ch) + (reg)) + +enum mipi_csi2_data_type { + MIPI_CSI2_DATA_TYPE_RAW8 = 0x2a, + MIPI_CSI2_DATA_TYPE_RAW10 = 0x2b, + MIPI_CSI2_DATA_TYPE_RAW12 = 0x2c, +}; + +struct sun6i_mipi_csi2_video { + struct v4l2_fwnode_endpoint endpoint; + struct v4l2_subdev subdev; + struct media_pad pads[2]; + + struct v4l2_async_subdev subdev_async; + struct v4l2_async_notifier notifier; + + struct v4l2_subdev *remote_subdev; + + struct v4l2_mbus_framefmt mbus_format; +}; + +struct sun6i_mipi_csi2_dev { + struct device *dev; + + struct regmap *regmap; + struct clk *clk_bus; + struct clk *clk_mod; + struct reset_control *reset; + struct phy *dphy; + + struct sun6i_mipi_csi2_video video; +}; + +#define sun6i_mipi_csi2_subdev_video(s) \ + container_of(s, struct sun6i_mipi_csi2_video, subdev) + +#define sun6i_mipi_csi2_video_dev(v) \ + container_of(v, struct sun6i_mipi_csi2_dev, video) + +#endif /* __SUN6I_MIPI_CSI2_H__ */ -- 2.29.2