linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lecopzer Chen <lecopzer@gmail.com>
To: linux-kernel@vger.kernel.org, linux-mm@kvack.org,
	kasan-dev@googlegroups.com, linux-arm-kernel@lists.infradead.org
Cc: dan.j.williams@intel.com, aryabinin@virtuozzo.com,
	glider@google.com, dvyukov@google.com, akpm@linux-foundation.org,
	linux-mediatek@lists.infradead.org, yj.chiang@mediatek.com,
	will@kernel.org, catalin.marinas@arm.com,
	Lecopzer Chen <lecopzer@gmail.com>,
	Lecopzer Chen <lecopzer.chen@mediatek.com>
Subject: [PATCH 1/3] arm64: kasan: don't populate vmalloc area for CONFIG_KASAN_VMALLOC
Date: Mon,  4 Jan 2021 01:11:35 +0800	[thread overview]
Message-ID: <20210103171137.153834-2-lecopzer@gmail.com> (raw)
In-Reply-To: <20210103171137.153834-1-lecopzer@gmail.com>

Linux support KAsan for VMALLOC since commit 3c5c3cfb9ef4da9
("kasan: support backing vmalloc space with real shadow memory")

Like how the MODULES_VADDR does now, just not to early populate
the VMALLOC_START between VMALLOC_END.
similarly, the kernel code mapping is now in the VMALLOC area and
should keep these area populated.

Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
---
 arch/arm64/mm/kasan_init.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/mm/kasan_init.c b/arch/arm64/mm/kasan_init.c
index d8e66c78440e..d7ad3f1e9c4d 100644
--- a/arch/arm64/mm/kasan_init.c
+++ b/arch/arm64/mm/kasan_init.c
@@ -214,6 +214,7 @@ static void __init kasan_init_shadow(void)
 {
 	u64 kimg_shadow_start, kimg_shadow_end;
 	u64 mod_shadow_start, mod_shadow_end;
+	u64 vmalloc_shadow_start, vmalloc_shadow_end;
 	phys_addr_t pa_start, pa_end;
 	u64 i;
 
@@ -223,6 +224,9 @@ static void __init kasan_init_shadow(void)
 	mod_shadow_start = (u64)kasan_mem_to_shadow((void *)MODULES_VADDR);
 	mod_shadow_end = (u64)kasan_mem_to_shadow((void *)MODULES_END);
 
+	vmalloc_shadow_start = (u64)kasan_mem_to_shadow((void *)VMALLOC_START);
+	vmalloc_shadow_end = (u64)kasan_mem_to_shadow((void *)VMALLOC_END);
+
 	/*
 	 * We are going to perform proper setup of shadow memory.
 	 * At first we should unmap early shadow (clear_pgds() call below).
@@ -241,12 +245,21 @@ static void __init kasan_init_shadow(void)
 
 	kasan_populate_early_shadow(kasan_mem_to_shadow((void *)PAGE_END),
 				   (void *)mod_shadow_start);
-	kasan_populate_early_shadow((void *)kimg_shadow_end,
-				   (void *)KASAN_SHADOW_END);
+	if (IS_ENABLED(CONFIG_KASAN_VMALLOC)) {
+		kasan_populate_early_shadow((void *)vmalloc_shadow_end,
+					   (void *)KASAN_SHADOW_END);
+		if (vmalloc_shadow_start > mod_shadow_end)
+			kasan_populate_early_shadow((void *)mod_shadow_end,
+						    (void *)vmalloc_shadow_start);
+
+	}	else {
+		kasan_populate_early_shadow((void *)kimg_shadow_end,
+					   (void *)KASAN_SHADOW_END);
+		if (kimg_shadow_start > mod_shadow_end)
+			kasan_populate_early_shadow((void *)mod_shadow_end,
+						    (void *)kimg_shadow_start);
+	}
 
-	if (kimg_shadow_start > mod_shadow_end)
-		kasan_populate_early_shadow((void *)mod_shadow_end,
-					    (void *)kimg_shadow_start);
 
 	for_each_mem_range(i, &pa_start, &pa_end) {
 		void *start = (void *)__phys_to_virt(pa_start);
-- 
2.25.1


  reply	other threads:[~2021-01-03 17:13 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-03 17:11 [PATCH 0/3] arm64: kasan: support CONFIG_KASAN_VMALLOC Lecopzer Chen
2021-01-03 17:11 ` Lecopzer Chen [this message]
2021-01-03 17:11 ` [PATCH 2/3] arm64: kasan: abstract _text and _end to KERNEL_START/END Lecopzer Chen
2021-01-03 17:11 ` [PATCH 3/3] arm64: Kconfig: support CONFIG_KASAN_VMALLOC Lecopzer Chen
2021-01-08 18:29   ` Andrey Konovalov
2021-01-09  7:26     ` Lecopzer Chen
2021-01-08 18:30 ` [PATCH 0/3] arm64: kasan: " Andrey Konovalov
2021-01-08 18:41   ` Ard Biesheuvel
2021-01-09 10:02     ` Lecopzer Chen
2021-01-08 18:37 ` Andrey Konovalov
2021-01-09  7:34   ` Lecopzer Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210103171137.153834-2-lecopzer@gmail.com \
    --to=lecopzer@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=aryabinin@virtuozzo.com \
    --cc=catalin.marinas@arm.com \
    --cc=dan.j.williams@intel.com \
    --cc=dvyukov@google.com \
    --cc=glider@google.com \
    --cc=kasan-dev@googlegroups.com \
    --cc=lecopzer.chen@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-mm@kvack.org \
    --cc=will@kernel.org \
    --cc=yj.chiang@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).