linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-omap@vger.kernel.org,
	Arthur Demchenkov <spinal.by@gmail.com>,
	Carl Philipp Klemm <philipp@uvos.xyz>,
	Merlijn Wajer <merlijn@wizzup.org>, Pavel Machek <pavel@ucw.cz>,
	ruleh <ruleh@gmx.de>, Sebastian Reichel <sre@kernel.org>
Subject: [PATCH 2/4] Input: omap4-keypad - scan keys in two phases and simplify with bitmask
Date: Wed,  6 Jan 2021 14:58:20 +0200	[thread overview]
Message-ID: <20210106125822.31315-3-tony@atomide.com> (raw)
In-Reply-To: <20210106125822.31315-1-tony@atomide.com>

Because of errata i689 the keyboard can idle with state where no key
up interrupts are seen until after the next key press.

This means we need to first check for any lost key up events before
scanning for new down events.

For example, rapidly pressing shift-shift-j can sometimes produce a J
instead of j. Let's fix the issue by scanning the keyboard in two
phases. First we scan for any key up events that we may have missed,
and then we scan for key down events.

Let's also simplify things with for_each_set_bit() as suggested by
Dmitry Torokhov <dmitry.torokhov@gmail.com>.

Cc: Arthur Demchenkov <spinal.by@gmail.com>
Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: ruleh <ruleh@gmx.de>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/input/keyboard/omap4-keypad.c | 70 ++++++++++++++++++---------
 1 file changed, 47 insertions(+), 23 deletions(-)

diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
--- a/drivers/input/keyboard/omap4-keypad.c
+++ b/drivers/input/keyboard/omap4-keypad.c
@@ -78,7 +78,7 @@ struct omap4_keypad {
 	u32 irqreg_offset;
 	unsigned int row_shift;
 	bool no_autorepeat;
-	unsigned char key_state[8];
+	u64 keys;
 	unsigned short *keymap;
 };
 
@@ -107,6 +107,41 @@ static void kbd_write_irqreg(struct omap4_keypad *keypad_data,
 		     keypad_data->base + keypad_data->irqreg_offset + offset);
 }
 
+static int omap4_keypad_scan_state(struct omap4_keypad *keypad_data, u64 keys,
+				   bool down)
+{
+	struct input_dev *input_dev = keypad_data->input;
+	unsigned int col, row, code;
+	DECLARE_BITMAP(mask, 64);
+	unsigned long bit;
+	int events = 0;
+	bool key_down;
+	u64 changed;
+
+	changed = keys ^ keypad_data->keys;
+	bitmap_from_u64(mask, changed);
+
+	for_each_set_bit(bit, mask, keypad_data->rows * BITS_PER_BYTE) {
+		row = bit / BITS_PER_BYTE;
+		col = bit % BITS_PER_BYTE;
+		code = MATRIX_SCAN_CODE(row, col, keypad_data->row_shift);
+
+		if (BIT_ULL(bit) & keys)
+			key_down = true;
+		else
+			key_down = false;
+
+		if (key_down != down)
+			continue;
+
+		input_event(input_dev, EV_MSC, MSC_SCAN, code);
+		input_report_key(input_dev, keypad_data->keymap[code],
+				 key_down);
+		events++;
+	}
+
+	return events;
+}
 
 /* Interrupt handlers */
 static irqreturn_t omap4_keypad_irq_handler(int irq, void *dev_id)
@@ -123,34 +158,23 @@ static irqreturn_t omap4_keypad_irq_thread_fn(int irq, void *dev_id)
 {
 	struct omap4_keypad *keypad_data = dev_id;
 	struct input_dev *input_dev = keypad_data->input;
-	unsigned char key_state[ARRAY_SIZE(keypad_data->key_state)];
-	unsigned int col, row, code, changed;
-	u32 *new_state = (u32 *) key_state;
+	int keys_up, keys_down;
+	u32 low, high;
+	u64 keys;
 
-	*new_state = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0);
-	*(new_state + 1) = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32);
+	low = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0);
+	high = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32);
+	keys = low | (u64)high << 32;
 
-	for (row = 0; row < keypad_data->rows; row++) {
-		changed = key_state[row] ^ keypad_data->key_state[row];
-		if (!changed)
-			continue;
+	/* Scan for key up events for lost key-up interrupts */
+	keys_up = omap4_keypad_scan_state(keypad_data, keys, false);
 
-		for (col = 0; col < keypad_data->cols; col++) {
-			if (changed & (1 << col)) {
-				code = MATRIX_SCAN_CODE(row, col,
-						keypad_data->row_shift);
-				input_event(input_dev, EV_MSC, MSC_SCAN, code);
-				input_report_key(input_dev,
-						 keypad_data->keymap[code],
-						 key_state[row] & (1 << col));
-			}
-		}
-	}
+	/* Scan for key down events */
+	keys_down = omap4_keypad_scan_state(keypad_data, keys, true);
 
 	input_sync(input_dev);
 
-	memcpy(keypad_data->key_state, key_state,
-		sizeof(keypad_data->key_state));
+	keypad_data->keys = keys;
 
 	/* clear pending interrupts */
 	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
-- 
2.30.0

  parent reply	other threads:[~2021-01-06 12:59 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-06 12:58 [PATCHv4 0/4] Lost key-up interrupt handling for omap4-keypad Tony Lindgren
2021-01-06 12:58 ` [PATCH 1/4] Input: omap4-keypad - disable unused long interrupts Tony Lindgren
2021-01-06 12:58 ` Tony Lindgren [this message]
2021-01-06 15:01   ` [PATCH 2/4] Input: omap4-keypad - scan keys in two phases and simplify with bitmask kernel test robot
2021-01-06 12:58 ` [PATCH 3/4] Input: omap4-keypad - use PM runtime to check keys for errata Tony Lindgren
2021-01-06 15:33   ` kernel test robot
2021-01-06 16:15   ` kernel test robot
2021-01-06 16:22   ` kernel test robot
2021-01-10  6:34   ` Dmitry Torokhov
2021-01-10 16:49     ` Tony Lindgren
2021-01-06 12:58 ` [PATCH 4/4] Input: omap4-keypad - simplify probe with devm Tony Lindgren
2021-01-06 13:43   ` Sebastian Reichel
2021-01-08  7:25     ` Tony Lindgren
2021-01-06 17:59   ` kernel test robot
2021-01-10  6:31   ` Dmitry Torokhov
2021-01-10 16:36     ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210106125822.31315-3-tony@atomide.com \
    --to=tony@atomide.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=merlijn@wizzup.org \
    --cc=pavel@ucw.cz \
    --cc=philipp@uvos.xyz \
    --cc=ruleh@gmx.de \
    --cc=spinal.by@gmail.com \
    --cc=sre@kernel.org \
    --subject='Re: [PATCH 2/4] Input: omap4-keypad - scan keys in two phases and simplify with bitmask' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).