From: Hans de Goede <hdegoede@redhat.com>
To: Lee Jones <lee.jones@linaro.org>,
Cezary Rojewski <cezary.rojewski@intel.com>,
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
Liam Girdwood <liam.r.girdwood@linux.intel.com>,
Jie Yang <yang.jie@linux.intel.com>,
Mark Brown <broonie@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>,
patches@opensource.cirrus.com, linux-kernel@vger.kernel.org,
Andy Shevchenko <andy.shevchenko@gmail.com>,
Charles Keepax <ckeepax@opensource.cirrus.com>,
alsa-devel@alsa-project.org
Subject: [PATCH v2 07/12] ASoC: arizona-jack: Use arizona->dev for runtime-pm
Date: Sun, 17 Jan 2021 17:05:50 +0100 [thread overview]
Message-ID: <20210117160555.78376-8-hdegoede@redhat.com> (raw)
In-Reply-To: <20210117160555.78376-1-hdegoede@redhat.com>
Use arizona->dev for runtime-pm as the main shared/libray code from
sound/soc/codecs/arizona.c does.
This is part of a patch series converting the arizona extcon driver into
a helper library for letting the arizona codec-drivers directly report jack
state through the standard sound/soc/soc-jack.c functions.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
sound/soc/codecs/arizona-jack.c | 42 ++++++++++++++-------------------
sound/soc/codecs/arizona.h | 1 -
2 files changed, 18 insertions(+), 25 deletions(-)
diff --git a/sound/soc/codecs/arizona-jack.c b/sound/soc/codecs/arizona-jack.c
index c81c3b20f94e..a6e8071f84ab 100644
--- a/sound/soc/codecs/arizona-jack.c
+++ b/sound/soc/codecs/arizona-jack.c
@@ -251,7 +251,7 @@ static void arizona_start_mic(struct arizona_priv *info)
unsigned int mode;
/* Microphone detection can't use idle mode */
- pm_runtime_get(info->dev);
+ pm_runtime_get_sync(arizona->dev);
if (info->detecting) {
ret = regulator_allow_bypass(info->micvdd, false);
@@ -296,7 +296,7 @@ static void arizona_start_mic(struct arizona_priv *info)
dev_err(arizona->dev, "Failed to enable micd: %d\n", ret);
} else if (!change) {
regulator_disable(info->micvdd);
- pm_runtime_put_autosuspend(info->dev);
+ pm_runtime_put_autosuspend(arizona->dev);
}
}
@@ -341,8 +341,8 @@ static void arizona_stop_mic(struct arizona_priv *info)
if (change) {
regulator_disable(info->micvdd);
- pm_runtime_mark_last_busy(info->dev);
- pm_runtime_put_autosuspend(info->dev);
+ pm_runtime_mark_last_busy(arizona->dev);
+ pm_runtime_put_autosuspend(arizona->dev);
}
}
@@ -534,7 +534,7 @@ static int arizona_hpdet_do_id(struct arizona_priv *info, int *reading,
info->num_hpdet_res = 0;
info->hpdet_retried = true;
arizona_start_hpdet_acc_id(info);
- pm_runtime_put(info->dev);
+ pm_runtime_put(arizona->dev);
return -EAGAIN;
}
@@ -631,7 +631,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
arizona_start_mic(info);
if (info->hpdet_active) {
- pm_runtime_put_autosuspend(info->dev);
+ pm_runtime_put_autosuspend(arizona->dev);
info->hpdet_active = false;
}
@@ -656,7 +656,7 @@ static void arizona_identify_headphone(struct arizona_priv *info)
dev_dbg(arizona->dev, "Starting HPDET\n");
/* Make sure we keep the device enabled during the measurement */
- pm_runtime_get(info->dev);
+ pm_runtime_get_sync(arizona->dev);
info->hpdet_active = true;
@@ -685,7 +685,7 @@ static void arizona_identify_headphone(struct arizona_priv *info)
err:
arizona_extcon_hp_clamp(info, false);
- pm_runtime_put_autosuspend(info->dev);
+ pm_runtime_put_autosuspend(arizona->dev);
/* Just report headphone */
ret = extcon_set_state_sync(info->edev, EXTCON_JACK_HEADPHONE, true);
@@ -708,7 +708,7 @@ static void arizona_start_hpdet_acc_id(struct arizona_priv *info)
dev_dbg(arizona->dev, "Starting identification via HPDET\n");
/* Make sure we keep the device enabled during the measurement */
- pm_runtime_get_sync(info->dev);
+ pm_runtime_get_sync(arizona->dev);
info->hpdet_active = true;
@@ -1006,7 +1006,7 @@ static void arizona_micd_detect(struct work_struct *work)
else
arizona_button_reading(info);
- pm_runtime_mark_last_busy(info->dev);
+ pm_runtime_mark_last_busy(arizona->dev);
mutex_unlock(&info->lock);
}
@@ -1090,7 +1090,7 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
cancelled_hp = cancel_delayed_work_sync(&info->hpdet_work);
cancelled_mic = cancel_delayed_work_sync(&info->micd_timeout_work);
- pm_runtime_get_sync(info->dev);
+ pm_runtime_get_sync(arizona->dev);
mutex_lock(&info->lock);
@@ -1110,7 +1110,7 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
dev_err(arizona->dev, "Failed to read jackdet status: %d\n",
ret);
mutex_unlock(&info->lock);
- pm_runtime_put_autosuspend(info->dev);
+ pm_runtime_put_autosuspend(arizona->dev);
return IRQ_NONE;
}
@@ -1210,8 +1210,8 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
mutex_unlock(&info->lock);
- pm_runtime_mark_last_busy(info->dev);
- pm_runtime_put_autosuspend(info->dev);
+ pm_runtime_mark_last_busy(arizona->dev);
+ pm_runtime_put_autosuspend(arizona->dev);
return IRQ_HANDLED;
}
@@ -1366,7 +1366,6 @@ static int arizona_extcon_probe(struct platform_device *pdev)
mutex_init(&info->lock);
info->arizona = arizona;
- info->dev = &pdev->dev;
info->last_jackdet = ~(ARIZONA_MICD_CLAMP_STS | ARIZONA_JD1_STS);
INIT_DELAYED_WORK(&info->hpdet_work, arizona_hpdet_work);
INIT_DELAYED_WORK(&info->micd_detect_work, arizona_micd_detect);
@@ -1617,9 +1616,7 @@ static int arizona_extcon_probe(struct platform_device *pdev)
arizona_extcon_set_mode(info, 0);
- pm_runtime_enable(&pdev->dev);
- pm_runtime_idle(&pdev->dev);
- pm_runtime_get_sync(&pdev->dev);
+ pm_runtime_get_sync(arizona->dev);
if (info->micd_clamp) {
jack_irq_rise = ARIZONA_IRQ_MICD_CLAMP_RISE;
@@ -1689,7 +1686,7 @@ static int arizona_extcon_probe(struct platform_device *pdev)
goto err_hpdet;
}
- pm_runtime_put(&pdev->dev);
+ pm_runtime_put(arizona->dev);
return 0;
@@ -1706,8 +1703,7 @@ static int arizona_extcon_probe(struct platform_device *pdev)
err_rise:
arizona_free_irq(arizona, jack_irq_rise, info);
err_pm:
- pm_runtime_put(&pdev->dev);
- pm_runtime_disable(&pdev->dev);
+ pm_runtime_put(arizona->dev);
err_gpio:
gpiod_put(info->micd_pol_gpio);
return ret;
@@ -1747,7 +1743,7 @@ static int arizona_extcon_remove(struct platform_device *pdev)
ret);
} else if (change) {
regulator_disable(info->micvdd);
- pm_runtime_put(info->dev);
+ pm_runtime_put(arizona->dev);
}
regmap_update_bits(arizona->regmap,
@@ -1759,8 +1755,6 @@ static int arizona_extcon_remove(struct platform_device *pdev)
gpiod_put(info->micd_pol_gpio);
- pm_runtime_disable(&pdev->dev);
-
return 0;
}
diff --git a/sound/soc/codecs/arizona.h b/sound/soc/codecs/arizona.h
index d1a263a67bba..7132dbc3c840 100644
--- a/sound/soc/codecs/arizona.h
+++ b/sound/soc/codecs/arizona.h
@@ -93,7 +93,6 @@ struct arizona_priv {
bool dvfs_cached;
/* Variables used by arizona-jack.c code */
- struct device *dev;
struct mutex lock;
struct delayed_work hpdet_work;
struct delayed_work micd_detect_work;
--
2.28.0
next prev parent reply other threads:[~2021-01-17 16:09 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-17 16:05 [PATCH v2 00/12] MFD/extcon/ASoC: Rework arizona codec jack-detect support Hans de Goede
2021-01-17 16:05 ` [PATCH v2 01/12] mfd: arizona: Drop arizona-extcon cells Hans de Goede
2021-01-17 16:05 ` [PATCH v2 02/12] ASoC: arizona-jack: Add arizona-jack.c Hans de Goede
2021-01-18 11:57 ` Andy Shevchenko
2021-01-17 16:05 ` [PATCH v2 03/12] ASoC: arizona-jack: Fix some issues when HPDET IRQ fires after the jack has been unplugged Hans de Goede
2021-01-18 12:47 ` Mark Brown
2021-01-21 15:58 ` Hans de Goede
2021-01-22 11:07 ` Charles Keepax
2021-01-17 16:05 ` [PATCH v2 04/12] ASoC: arizona-jack: Fix various races on driver unbind Hans de Goede
2021-01-17 16:05 ` [PATCH v2 05/12] ASoC: arizona-jack: Fix flags parameter to the gpiod_get("wlf,micd-pol") call Hans de Goede
2021-01-17 16:05 ` [PATCH v2 06/12] ASoC: arizona-jack: Move jack-detect variables to struct arizona_priv Hans de Goede
2021-01-18 12:01 ` Andy Shevchenko
2021-01-22 11:12 ` Charles Keepax
2021-01-17 16:05 ` Hans de Goede [this message]
2021-01-18 12:02 ` [PATCH v2 07/12] ASoC: arizona-jack: Use arizona->dev for runtime-pm Andy Shevchenko
2021-01-22 0:03 ` Hans de Goede
2021-01-22 9:38 ` Andy Shevchenko
2021-01-22 13:56 ` Hans de Goede
2021-01-17 16:05 ` [PATCH v2 08/12] ASoC: arizona-jack: convert into a helper library for codec drivers Hans de Goede
2021-01-18 17:24 ` Andy Shevchenko
2021-01-19 9:51 ` Richard Fitzgerald
2021-01-21 16:55 ` Hans de Goede
2021-01-22 11:26 ` Charles Keepax
2021-01-22 12:23 ` Hans de Goede
2021-01-22 13:04 ` Charles Keepax
2021-01-22 13:36 ` Hans de Goede
2021-01-22 13:21 ` Charles Keepax
2021-01-17 16:05 ` [PATCH v2 09/12] ASoC: arizona-jack: Use snd_soc_jack to report jack events Hans de Goede
2021-01-17 16:05 ` [PATCH v2 10/12] ASoC: arizona: Make the wm5102, wm5110, wm8997 and wm8998 drivers use the new jack library Hans de Goede
2021-01-17 16:05 ` [PATCH v2 11/12] ASoC: Intel: bytcr_wm5102: Add jack detect support Hans de Goede
2021-01-17 16:05 ` [PATCH v2 12/12] extcon: arizona: Drop the arizona extcon driver Hans de Goede
2021-01-18 12:13 ` Andy Shevchenko
2021-01-18 9:55 ` [PATCH v2 00/12] MFD/extcon/ASoC: Rework arizona codec jack-detect support Lee Jones
2021-01-18 10:28 ` Hans de Goede
2021-01-18 10:47 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210117160555.78376-8-hdegoede@redhat.com \
--to=hdegoede@redhat.com \
--cc=alsa-devel@alsa-project.org \
--cc=andy.shevchenko@gmail.com \
--cc=broonie@kernel.org \
--cc=cezary.rojewski@intel.com \
--cc=ckeepax@opensource.cirrus.com \
--cc=lee.jones@linaro.org \
--cc=liam.r.girdwood@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=yang.jie@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).