linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andre Przywara <andre.przywara@arm.com>
To: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@siol.net>
Cc: "Icenowy Zheng" <icenowy@aosc.io>,
	"Linus Walleij" <linus.walleij@linaro.org>,
	"Rob Herring" <robh@kernel.org>,
	"Clément Péron" <peron.clem@gmail.com>,
	"Samuel Holland" <samuel@sholland.org>,
	"Shuosheng Huang" <huangshuosheng@allwinnertech.com>,
	"Yangtao Li" <tiny.windzz@gmail.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com,
	"Kishon Vijay Abraham I" <kishon@ti.com>,
	"Vinod Koul" <vkoul@kernel.org>
Subject: [PATCH v3 13/21] phy: sun4i-usb: Rework HCI PHY (aka. "pmu_unk1") handling
Date: Mon, 18 Jan 2021 02:08:40 +0000	[thread overview]
Message-ID: <20210118020848.11721-14-andre.przywara@arm.com> (raw)
In-Reply-To: <20210118020848.11721-1-andre.przywara@arm.com>

As Icenowy pointed out, newer manuals (starting with H6) actually
document the register block at offset 0x800 as "HCI controller and PHY
interface", also describe the bits in our "PMU_UNK1" register.
Let's put proper names to those "unknown" variables and symbols.

While we are at it, generalise the existing code by allowing a bitmap
of bits to clear, to cover newer SoCs: The A100 and H616 use a different
bit for the SIDDQ control.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 drivers/phy/allwinner/phy-sun4i-usb.c | 29 +++++++++++----------------
 1 file changed, 12 insertions(+), 17 deletions(-)

diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index 788dd5cdbb7d..539209fe3468 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -43,7 +43,7 @@
 #define REG_PHYCTL_A33			0x10
 #define REG_PHY_OTGCTL			0x20
 
-#define REG_PMU_UNK1			0x10
+#define REG_HCI_PHY_CTL			0x10
 
 #define PHYCTL_DATA			BIT(7)
 
@@ -115,9 +115,9 @@ struct sun4i_usb_phy_cfg {
 	int hsic_index;
 	enum sun4i_usb_phy_type type;
 	u32 disc_thresh;
+	u32 hci_phy_ctl_siddq;
 	u8 phyctl_offset;
 	bool dedicated_clocks;
-	bool enable_pmu_unk1;
 	bool phy0_dual_route;
 	int missing_phys;
 };
@@ -288,6 +288,12 @@ static int sun4i_usb_phy_init(struct phy *_phy)
 		return ret;
 	}
 
+	if (phy->pmu && data->cfg->hci_phy_ctl_siddq) {
+		val = readl(phy->pmu + REG_HCI_PHY_CTL);
+		val &= ~data->cfg->hci_phy_ctl_siddq;
+		writel(val, phy->pmu + REG_HCI_PHY_CTL);
+	}
+
 	if (data->cfg->type == sun8i_a83t_phy ||
 	    data->cfg->type == sun50i_h6_phy) {
 		if (phy->index == 0) {
@@ -297,11 +303,6 @@ static int sun4i_usb_phy_init(struct phy *_phy)
 			writel(val, data->base + data->cfg->phyctl_offset);
 		}
 	} else {
-		if (phy->pmu && data->cfg->enable_pmu_unk1) {
-			val = readl(phy->pmu + REG_PMU_UNK1);
-			writel(val & ~2, phy->pmu + REG_PMU_UNK1);
-		}
-
 		/* Enable USB 45 Ohm resistor calibration */
 		if (phy->index == 0)
 			sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1);
@@ -863,7 +864,6 @@ static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = {
 	.disc_thresh = 3,
 	.phyctl_offset = REG_PHYCTL_A10,
 	.dedicated_clocks = false,
-	.enable_pmu_unk1 = false,
 };
 
 static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
@@ -872,7 +872,6 @@ static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
 	.disc_thresh = 2,
 	.phyctl_offset = REG_PHYCTL_A10,
 	.dedicated_clocks = false,
-	.enable_pmu_unk1 = false,
 };
 
 static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
@@ -881,7 +880,6 @@ static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
 	.disc_thresh = 3,
 	.phyctl_offset = REG_PHYCTL_A10,
 	.dedicated_clocks = true,
-	.enable_pmu_unk1 = false,
 };
 
 static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
@@ -890,7 +888,6 @@ static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
 	.disc_thresh = 2,
 	.phyctl_offset = REG_PHYCTL_A10,
 	.dedicated_clocks = false,
-	.enable_pmu_unk1 = false,
 };
 
 static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
@@ -899,7 +896,6 @@ static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
 	.disc_thresh = 3,
 	.phyctl_offset = REG_PHYCTL_A10,
 	.dedicated_clocks = true,
-	.enable_pmu_unk1 = false,
 };
 
 static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
@@ -908,7 +904,6 @@ static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
 	.disc_thresh = 3,
 	.phyctl_offset = REG_PHYCTL_A33,
 	.dedicated_clocks = true,
-	.enable_pmu_unk1 = false,
 };
 
 static const struct sun4i_usb_phy_cfg sun8i_a83t_cfg = {
@@ -925,7 +920,7 @@ static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
 	.disc_thresh = 3,
 	.phyctl_offset = REG_PHYCTL_A33,
 	.dedicated_clocks = true,
-	.enable_pmu_unk1 = true,
+	.hci_phy_ctl_siddq = BIT(1),
 	.phy0_dual_route = true,
 };
 
@@ -935,7 +930,7 @@ static const struct sun4i_usb_phy_cfg sun8i_r40_cfg = {
 	.disc_thresh = 3,
 	.phyctl_offset = REG_PHYCTL_A33,
 	.dedicated_clocks = true,
-	.enable_pmu_unk1 = true,
+	.hci_phy_ctl_siddq = BIT(1),
 	.phy0_dual_route = true,
 };
 
@@ -945,7 +940,7 @@ static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = {
 	.disc_thresh = 3,
 	.phyctl_offset = REG_PHYCTL_A33,
 	.dedicated_clocks = true,
-	.enable_pmu_unk1 = true,
+	.hci_phy_ctl_siddq = BIT(1),
 	.phy0_dual_route = true,
 };
 
@@ -955,7 +950,7 @@ static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = {
 	.disc_thresh = 3,
 	.phyctl_offset = REG_PHYCTL_A33,
 	.dedicated_clocks = true,
-	.enable_pmu_unk1 = true,
+	.hci_phy_ctl_siddq = BIT(1),
 	.phy0_dual_route = true,
 };
 
-- 
2.17.5


  parent reply	other threads:[~2021-01-18  2:13 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-18  2:08 [PATCH v3 00/21] arm64: sunxi: Initial Allwinner H616 SoC support Andre Przywara
2021-01-18  2:08 ` [PATCH v3 01/21] dt-bindings: mmc: sunxi: Add Allwinner A100 and H616 compatibles Andre Przywara
2021-01-18  2:08 ` [PATCH v3 02/21] mmc: sunxi: add support for A100 mmc controller Andre Przywara
2021-01-18 13:28   ` Maxime Ripard
2021-01-18 15:52     ` Andre Przywara
2021-01-18 15:55       ` [linux-sunxi] " Chen-Yu Tsai
2021-01-21 16:38       ` Maxime Ripard
2021-01-18  2:08 ` [PATCH v3 03/21] dt-bindings: pinctrl: Add Allwinner H616 compatible strings Andre Przywara
2021-01-18 13:29   ` Maxime Ripard
2021-01-21 21:12   ` Linus Walleij
2021-01-18  2:08 ` [PATCH v3 04/21] pinctrl: sunxi: Add support for the Allwinner H616 pin controller Andre Przywara
2021-01-18 15:26   ` Maxime Ripard
2021-01-21 21:14   ` Linus Walleij
2021-01-18  2:08 ` [PATCH v3 05/21] pinctrl: sunxi: Add support for the Allwinner H616-R " Andre Przywara
2021-01-21 21:16   ` Linus Walleij
2021-01-18  2:08 ` [PATCH v3 06/21] dt-bindings: clk: sunxi-ccu: Add compatible string for Allwinner H616 Andre Przywara
2021-01-18 15:26   ` Maxime Ripard
2021-01-18  2:08 ` [PATCH v3 07/21] clk: sunxi-ng: Add support for the Allwinner H616 R-CCU Andre Przywara
2021-01-18 15:30   ` Maxime Ripard
2021-01-18  2:08 ` [PATCH v3 08/21] clk: sunxi-ng: Add support for the Allwinner H616 CCU Andre Przywara
2021-01-18 15:30   ` Maxime Ripard
2021-01-18  2:08 ` [PATCH v3 09/21] mfd: axp20x: Allow AXP chips without interrupt lines Andre Przywara
2021-01-18  3:37   ` Samuel Holland
2021-01-21 15:54     ` Andre Przywara
2021-01-18  2:08 ` [PATCH v3 10/21] dt-bindings: sram: sunxi-sram: Add H616 compatible string Andre Przywara
2021-01-18  2:08 ` [PATCH v3 11/21] soc: sunxi: sram: Add support for more than one EMAC clock Andre Przywara
2021-01-18  2:08 ` [PATCH v3 12/21] net: stmmac: dwmac-sun8i: Prepare for second EMAC clock register Andre Przywara
2021-01-18 21:27   ` Jakub Kicinski
2021-01-18  2:08 ` Andre Przywara [this message]
2021-01-18 15:32   ` [PATCH v3 13/21] phy: sun4i-usb: Rework HCI PHY (aka. "pmu_unk1") handling Maxime Ripard
2021-01-18  2:08 ` [PATCH v3 14/21] dt-bindings: usb: Add H616 compatible string Andre Przywara
2021-01-18 15:33   ` Maxime Ripard
2021-01-18  2:08 ` [PATCH v3 15/21] dt-bindings: usb: sunxi-musb: " Andre Przywara
2021-01-18 15:33   ` Maxime Ripard
2021-01-18  2:08 ` [PATCH v3 16/21] phy: sun4i-usb: Add support for the H616 USB PHY Andre Przywara
2021-01-18 15:33   ` Maxime Ripard
2021-01-18  2:08 ` [PATCH v3 17/21] dt-bindings: watchdog: sun4i: Add H616 compatible string Andre Przywara
2021-01-18 15:34   ` maxime
2021-01-23 17:31   ` Guenter Roeck
2021-01-18  2:08 ` [PATCH v3 18/21] dt-bindings: allwinner: Add H616 compatible strings Andre Przywara
2021-01-18  4:28   ` Samuel Holland
2021-01-25 11:59     ` Andre Przywara
2021-01-18 12:05   ` Mark Brown
2021-01-18  2:08 ` [PATCH v3 19/21] arm64: dts: allwinner: Add Allwinner H616 .dtsi file Andre Przywara
2021-01-18  4:35   ` Samuel Holland
2021-01-18  2:08 ` [PATCH v3 20/21] dt-bindings: arm: sunxi: Add OrangePi Zero 2 binding Andre Przywara
2021-01-18  2:08 ` [PATCH v3 21/21] arm64: dts: allwinner: Add OrangePi Zero 2 .dts Andre Przywara

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210118020848.11721-14-andre.przywara@arm.com \
    --to=andre.przywara@arm.com \
    --cc=huangshuosheng@allwinnertech.com \
    --cc=icenowy@aosc.io \
    --cc=jernej.skrabec@siol.net \
    --cc=kishon@ti.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=mripard@kernel.org \
    --cc=peron.clem@gmail.com \
    --cc=robh@kernel.org \
    --cc=samuel@sholland.org \
    --cc=tiny.windzz@gmail.com \
    --cc=vkoul@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).