linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Peter Geis <pgwipeout@gmail.com>,
	Jon Hunter <jonathanh@nvidia.com>, Ion Agorria <ion@agorria.com>,
	Sameer Pujar <spujar@nvidia.com>,
	Thierry Reding <treding@nvidia.com>, Takashi Iwai <tiwai@suse.de>,
	Sasha Levin <sashal@kernel.org>,
	alsa-devel@alsa-project.org, linux-tegra@vger.kernel.org
Subject: [PATCH AUTOSEL 5.10 20/45] ALSA: hda/tegra: fix tegra-hda on tegra30 soc
Date: Tue, 19 Jan 2021 20:25:37 -0500	[thread overview]
Message-ID: <20210120012602.769683-20-sashal@kernel.org> (raw)
In-Reply-To: <20210120012602.769683-1-sashal@kernel.org>

From: Peter Geis <pgwipeout@gmail.com>

[ Upstream commit 615d435400435876ac68c1de37e9526a9164eaec ]

Currently hda on tegra30 fails to open a stream with an input/output error.

For example:
speaker-test -Dhw:0,3 -c 2

speaker-test 1.2.2

Playback device is hw:0,3
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 64 to 16384
Period size range from 32 to 8192
Using max buffer size 16384
Periods = 4
was set period_size = 4096
was set buffer_size = 16384
 0 - Front Left
Write error: -5,Input/output error
xrun_recovery failed: -5,Input/output error
Transfer failed: Input/output error

The tegra-hda device was introduced in tegra30 but only utilized in
tegra124 until recent chips. Tegra210/186 work only due to a hardware
change. For this reason it is unknown when this issue first manifested.
Discussions with the hardware team show this applies to all current tegra
chips. It has been resolved in the tegra234, which does not have hda
support at this time.

The explanation from the hardware team is this:
Below is the striping formula referenced from HD audio spec.
   { ((num_channels * bits_per_sample) / number of SDOs) >= 8 }

The current issue is seen because Tegra HW has a problem with boundary
condition (= 8) for striping. The reason why it is not seen on
Tegra210/Tegra186 is because it uses max 2SDO lines. Max SDO lines is
read from GCAP register.

For the given stream (channels = 2, bps = 16);
ratio = (channels * bps) / NSDO = 32 / NSDO;

On Tegra30,      ratio = 32/4 = 8  (FAIL)
On Tegra210/186, ratio = 32/2 = 16 (PASS)
On Tegra194,     ratio = 32/4 = 8  (FAIL) ==> Earlier workaround was
applied for it

If Tegra210/186 is forced to use 4SDO, it fails there as well. So the
behavior is consistent across all these chips.

Applying the fix in [1] universally resolves this issue on tegra30-hda.
Tested on the Ouya game console and the tf201 tablet.

[1] commit 60019d8c650d ("ALSA: hda/tegra: workaround playback failure on
Tegra194")

Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ion Agorria <ion@agorria.com>
Reviewed-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20210108135913.2421585-3-pgwipeout@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/hda_tegra.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/pci/hda/hda_tegra.c b/sound/pci/hda/hda_tegra.c
index 70164d1428d40..361cf2041911a 100644
--- a/sound/pci/hda/hda_tegra.c
+++ b/sound/pci/hda/hda_tegra.c
@@ -388,7 +388,7 @@ static int hda_tegra_first_init(struct azx *chip, struct platform_device *pdev)
 	 * in powers of 2, next available ratio is 16 which can be
 	 * used as a limiting factor here.
 	 */
-	if (of_device_is_compatible(np, "nvidia,tegra194-hda"))
+	if (of_device_is_compatible(np, "nvidia,tegra30-hda"))
 		chip->bus.core.sdo_limit = 16;
 
 	/* codec detection */
-- 
2.27.0


  parent reply	other threads:[~2021-01-20  1:33 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-20  1:25 [PATCH AUTOSEL 5.10 01/45] ASoC: Intel: haswell: Add missing pm_ops Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 02/45] ASoC: rt711: mutex between calibration and power state changes Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 03/45] SUNRPC: Handle TCP socket sends with kernel_sendpage() again Sasha Levin
2021-02-08 19:34   ` Trond Myklebust
2021-02-08 19:48     ` Chuck Lever
2021-02-08 20:12       ` Trond Myklebust
2021-02-08 20:17         ` Chuck Lever
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 04/45] ASoC: AMD Renoir - add DMI entry for Lenovo ThinkPad E14 Gen 2 Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 05/45] HID: multitouch: Enable multi-input for Synaptics pointstick/touchpad device Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 06/45] HID: sony: select CONFIG_CRC32 Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 07/45] dm integrity: select CRYPTO_SKCIPHER Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 08/45] x86/hyperv: Fix kexec panic/hang issues Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 09/45] scsi: ufs: Relax the condition of UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 10/45] scsi: ufs: Correct the LUN used in eh_device_reset_handler() callback Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 11/45] scsi: qedi: Correct max length of CHAP secret Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 12/45] scsi: scsi_debug: Fix memleak in scsi_debug_init() Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 13/45] scsi: sd: Suppress spurious errors when WRITE SAME is being disabled Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 14/45] riscv: Fix kernel time_init() Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 15/45] riscv: Fix sifive serial driver Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 16/45] riscv: Enable interrupts during syscalls with M-Mode Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 17/45] HID: logitech-dj: add the G602 receiver Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 18/45] HID: Ignore battery for Elan touchscreen on ASUS UX550 Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 19/45] clk: tegra30: Add hda clock default rates to clock driver Sasha Levin
2021-01-20  1:25 ` Sasha Levin [this message]
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 21/45] r8152: Add Lenovo Powered USB-C Travel Hub Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 22/45] riscv: cacheinfo: Fix using smp_processor_id() in preemptible Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 23/45] arm64: make atomic helpers __always_inline Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 24/45] xen: Fix event channel callback via INTX/GSI Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 25/45] x86/xen: Add xen_no_vector_callback option to test PCI INTX delivery Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 26/45] x86/xen: Fix xen_hvm_smp_init() when vector callback not available Sasha Levin
2021-01-20  1:35   ` Boris Ostrovsky
2021-01-24 13:11     ` Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 27/45] net: stmmac: use __napi_schedule() for PREEMPT_RT Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 28/45] net: stmmac: Fixed mtu channged by cache aligned Sasha Levin
2021-01-20  6:08   ` Jakub Kicinski
2021-01-20 14:26     ` Sasha Levin
2021-01-21 14:39       ` [Linux-stm32] " Ahmad Fatoum
2021-01-21 16:02         ` Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 29/45] dts: phy: fix missing mdio device and probe failure of vsc8541-01 device Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 30/45] dts: phy: add GPIO number and active state used for phy reset Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 31/45] riscv: defconfig: enable gpio support for HiFive Unleashed Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 32/45] drm/amdgpu/psp: fix psp gfx ctrl cmds Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 33/45] drm/amd/display: disable dcn10 pipe split by default Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 34/45] HID: logitech-hidpp: Add product ID for MX Ergo in Bluetooth mode Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 35/45] drm/amd/display: Fix to be able to stop crc calculation Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 36/45] drm/nouveau/bios: fix issue shadowing expansion ROMs Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 37/45] drm/nouveau/privring: ack interrupts the same way as RM Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 38/45] drm/nouveau/i2c/gm200: increase width of aux semaphore owner fields Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 39/45] drm/nouveau/mmu: fix vram heap sizing Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 40/45] drm/nouveau/kms/nv50-: fix case where notifier buffer is at offset 0 Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 41/45] io_uring: flush timeouts that should already have expired Sasha Levin
2021-01-20  1:25 ` [PATCH AUTOSEL 5.10 42/45] libperf tests: If a test fails return non-zero Sasha Levin
2021-01-20  1:26 ` [PATCH AUTOSEL 5.10 43/45] libperf tests: Fail when failing to get a tracepoint id Sasha Levin
2021-01-20  1:26 ` [PATCH AUTOSEL 5.10 44/45] RISC-V: Set current memblock limit Sasha Levin
2021-01-20  1:26 ` [PATCH AUTOSEL 5.10 45/45] RISC-V: Fix maximum allowed phsyical memory for RV32 Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210120012602.769683-20-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=ion@agorria.com \
    --cc=jonathanh@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=pgwipeout@gmail.com \
    --cc=spujar@nvidia.com \
    --cc=stable@vger.kernel.org \
    --cc=tiwai@suse.de \
    --cc=treding@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).