From: Dmitry Osipenko <digetx@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Nicolas Chauvet <kwizart@gmail.com>,
Matt Merhar <mattmerhar@protonmail.com>,
Peter Geis <pgwipeout@gmail.com>
Cc: linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v1 04/13] ARM: tegra: cardhu: Support CPU thermal throttling
Date: Thu, 21 Jan 2021 21:22:59 +0300 [thread overview]
Message-ID: <20210121182308.16080-5-digetx@gmail.com> (raw)
In-Reply-To: <20210121182308.16080-1-digetx@gmail.com>
Enable CPU thermal throttling on Tegra30 Cardhu board.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
arch/arm/boot/dts/tegra30-cardhu.dtsi | 43 ++++++++++++++++++++++++++-
1 file changed, 42 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index 309538bdcd66..2dff14b87f3e 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
#include "tegra30.dtsi"
#include "tegra30-cpu-opp.dtsi"
#include "tegra30-cpu-opp-microvolt.dtsi"
@@ -342,12 +343,13 @@ ldo8_reg: ldo8 {
};
};
- temperature-sensor@4c {
+ nct1008: temperature-sensor@4c {
compatible = "onnn,nct1008";
reg = <0x4c>;
vcc-supply = <&sys_3v3_reg>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>;
+ #thermal-sensor-cells = <1>;
};
vdd_core: tps62361@60 {
@@ -441,21 +443,25 @@ cpus {
cpu0: cpu@0 {
cpu-supply = <&vddctrl_reg>;
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
cpu1: cpu@1 {
cpu-supply = <&vddctrl_reg>;
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
cpu2: cpu@2 {
cpu-supply = <&vddctrl_reg>;
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
cpu3: cpu@3 {
cpu-supply = <&vddctrl_reg>;
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
};
@@ -638,6 +644,41 @@ sound {
<&tegra_car TEGRA30_CLK_EXTERN1>;
};
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <1000>; /* milliseconds */
+ polling-delay = <5000>; /* milliseconds */
+
+ thermal-sensors = <&nct1008 1>;
+
+ trips {
+ trip0: cpu-alert0 {
+ /* throttle at 57C until temperature drops to 56.8C */
+ temperature = <57000>;
+ hysteresis = <200>;
+ type = "passive";
+ };
+
+ trip1: cpu-crit {
+ /* shut down at 60C */
+ temperature = <60000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&trip0>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";
--
2.29.2
next prev parent reply other threads:[~2021-01-21 18:50 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-21 18:22 [PATCH v1 00/13] NVIDIA Tegra ARM32 device-tree improvements Dmitry Osipenko
2021-01-21 18:22 ` [PATCH v1 01/13] ARM: tegra: ventana: Support CPU and Core voltage scaling Dmitry Osipenko
2021-01-21 18:22 ` [PATCH v1 02/13] ARM: tegra: ventana: Support CPU thermal throttling Dmitry Osipenko
2021-01-21 18:22 ` [PATCH v1 03/13] ARM: tegra: cardhu: Support CPU frequency and voltage scaling on all board variants Dmitry Osipenko
2021-01-21 18:22 ` Dmitry Osipenko [this message]
2021-01-21 18:23 ` [PATCH v1 05/13] ARM: tegra: paz00: Enable full voltage scaling ranges for CPU and Core domains Dmitry Osipenko
2021-01-21 18:23 ` [PATCH v1 06/13] ARM: tegra: acer-a500: Enable core voltage scaling Dmitry Osipenko
2021-01-21 18:23 ` [PATCH v1 07/13] ARM: tegra: acer-a500: Reduce thermal throttling hysteresis to 0.2C Dmitry Osipenko
2021-01-21 18:23 ` [PATCH v1 08/13] ARM: tegra: acer-a500: Specify all CPU cores as cooling devices Dmitry Osipenko
2021-01-21 18:23 ` [PATCH v1 09/13] ARM: tegra: acer-a500: Rename avdd to vdda of touchscreen node Dmitry Osipenko
2021-01-22 20:14 ` Dmitry Osipenko
2021-01-21 18:23 ` [PATCH v1 10/13] ARM: tegra: nexus7: Specify all CPU cores as cooling devices Dmitry Osipenko
2021-01-21 18:23 ` [PATCH v1 11/13] ARM: tegra: ouya: " Dmitry Osipenko
2021-01-21 18:23 ` [PATCH v1 12/13] ARM: tegra: Specify CPU suspend OPP in device-tree Dmitry Osipenko
2021-01-21 18:23 ` [PATCH v1 13/13] ARM: tegra: Specify memory " Dmitry Osipenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210121182308.16080-5-digetx@gmail.com \
--to=digetx@gmail.com \
--cc=daniel.lezcano@linaro.org \
--cc=jonathanh@nvidia.com \
--cc=kwizart@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mattmerhar@protonmail.com \
--cc=pgwipeout@gmail.com \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).