linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Pavel Tatashin <pasha.tatashin@soleen.com>
To: pasha.tatashin@soleen.com, linux-kernel@vger.kernel.org,
	linux-mm@kvack.org, akpm@linux-foundation.org, vbabka@suse.cz,
	mhocko@suse.com, david@redhat.com, osalvador@suse.de,
	dan.j.williams@intel.com, sashal@kernel.org,
	tyhicks@linux.microsoft.com, iamjoonsoo.kim@lge.com,
	mike.kravetz@oracle.com, rostedt@goodmis.org, mingo@redhat.com,
	jgg@ziepe.ca, peterz@infradead.org, mgorman@suse.de,
	willy@infradead.org, rientjes@google.com, jhubbard@nvidia.com,
	linux-doc@vger.kernel.org, ira.weiny@intel.com,
	linux-kselftest@vger.kernel.org
Subject: [PATCH v7 14/14] selftests/vm: test faulting in kernel, and verify pinnable pages
Date: Thu, 21 Jan 2021 22:37:48 -0500	[thread overview]
Message-ID: <20210122033748.924330-15-pasha.tatashin@soleen.com> (raw)
In-Reply-To: <20210122033748.924330-1-pasha.tatashin@soleen.com>

When pages are pinned they can be faulted in userland and migrated, and
they can be faulted right in kernel without migration.

In either case, the pinned pages must end-up being pinnable (not movable).

Add a new test to gup_test, to help verify that the gup/pup
(get_user_pages() / pin_user_pages()) behavior with respect to pinnable
and movable pages is reasonable and correct. Specifically, provide a
way to:

1) Verify that only "pinnable" pages are pinned. This is checked
automatically for you.

2) Verify that gup/pup performance is reasonable. This requires
comparing benchmarks between doing gup/pup on pages that have been
pre-faulted in from user space, vs. doing gup/pup on pages that are not
faulted in until gup/pup time (via FOLL_TOUCH). This decision is
controlled with the new -z command line option.

Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
---
 mm/gup_test.c                         |  6 ++++++
 tools/testing/selftests/vm/gup_test.c | 23 +++++++++++++++++++----
 2 files changed, 25 insertions(+), 4 deletions(-)

diff --git a/mm/gup_test.c b/mm/gup_test.c
index a6ed1c877679..d974dec19e1c 100644
--- a/mm/gup_test.c
+++ b/mm/gup_test.c
@@ -52,6 +52,12 @@ static void verify_dma_pinned(unsigned int cmd, struct page **pages,
 
 				dump_page(page, "gup_test failure");
 				break;
+			} else if (cmd == PIN_LONGTERM_BENCHMARK &&
+				WARN(!is_pinnable_page(page),
+				     "pages[%lu] is NOT pinnable but pinned\n",
+				     i)) {
+				dump_page(page, "gup_test failure");
+				break;
 			}
 		}
 		break;
diff --git a/tools/testing/selftests/vm/gup_test.c b/tools/testing/selftests/vm/gup_test.c
index 943cc2608dc2..1e662d59c502 100644
--- a/tools/testing/selftests/vm/gup_test.c
+++ b/tools/testing/selftests/vm/gup_test.c
@@ -13,6 +13,7 @@
 
 /* Just the flags we need, copied from mm.h: */
 #define FOLL_WRITE	0x01	/* check pte is writable */
+#define FOLL_TOUCH	0x02	/* mark page accessed */
 
 static char *cmd_to_str(unsigned long cmd)
 {
@@ -39,11 +40,11 @@ int main(int argc, char **argv)
 	unsigned long size = 128 * MB;
 	int i, fd, filed, opt, nr_pages = 1, thp = -1, repeats = 1, write = 1;
 	unsigned long cmd = GUP_FAST_BENCHMARK;
-	int flags = MAP_PRIVATE;
+	int flags = MAP_PRIVATE, touch = 0;
 	char *file = "/dev/zero";
 	char *p;
 
-	while ((opt = getopt(argc, argv, "m:r:n:F:f:abctTLUuwWSHp")) != -1) {
+	while ((opt = getopt(argc, argv, "m:r:n:F:f:abctTLUuwWSHpz")) != -1) {
 		switch (opt) {
 		case 'a':
 			cmd = PIN_FAST_BENCHMARK;
@@ -110,6 +111,10 @@ int main(int argc, char **argv)
 		case 'H':
 			flags |= (MAP_HUGETLB | MAP_ANONYMOUS);
 			break;
+		case 'z':
+			/* fault pages in gup, do not fault in userland */
+			touch = 1;
+			break;
 		default:
 			return -1;
 		}
@@ -167,8 +172,18 @@ int main(int argc, char **argv)
 	else if (thp == 0)
 		madvise(p, size, MADV_NOHUGEPAGE);
 
-	for (; (unsigned long)p < gup.addr + size; p += PAGE_SIZE)
-		p[0] = 0;
+	/*
+	 * FOLL_TOUCH, in gup_test, is used as an either/or case: either
+	 * fault pages in from the kernel via FOLL_TOUCH, or fault them
+	 * in here, from user space. This allows comparison of performance
+	 * between those two cases.
+	 */
+	if (touch) {
+		gup.gup_flags |= FOLL_TOUCH;
+	} else {
+		for (; (unsigned long)p < gup.addr + size; p += PAGE_SIZE)
+			p[0] = 0;
+	}
 
 	/* Only report timing information on the *_BENCHMARK commands: */
 	if ((cmd == PIN_FAST_BENCHMARK) || (cmd == GUP_FAST_BENCHMARK) ||
-- 
2.25.1


  parent reply	other threads:[~2021-01-22  3:41 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-22  3:37 [PATCH v7 00/14] prohibit pinning pages in ZONE_MOVABLE Pavel Tatashin
2021-01-22  3:37 ` [PATCH v7 01/14] mm/gup: don't pin migrated cma pages in movable zone Pavel Tatashin
2021-01-22  3:37 ` [PATCH v7 02/14] mm/gup: check every subpage of a compound page during isolation Pavel Tatashin
2021-01-22  3:37 ` [PATCH v7 03/14] mm/gup: return an error on migration failure Pavel Tatashin
2021-01-22  3:37 ` [PATCH v7 04/14] mm/gup: check for isolation errors Pavel Tatashin
2021-01-22  3:37 ` [PATCH v7 05/14] mm cma: rename PF_MEMALLOC_NOCMA to PF_MEMALLOC_PIN Pavel Tatashin
2021-01-22  3:37 ` [PATCH v7 06/14] mm: apply per-task gfp constraints in fast path Pavel Tatashin
2021-01-22  3:37 ` [PATCH v7 07/14] mm: honor PF_MEMALLOC_PIN for all movable pages Pavel Tatashin
2021-01-22  3:37 ` [PATCH v7 08/14] mm/gup: do not migrate zero page Pavel Tatashin
2021-01-22  3:37 ` [PATCH v7 09/14] mm/gup: migrate pinned pages out of movable zone Pavel Tatashin
2021-01-22  3:37 ` [PATCH v7 10/14] memory-hotplug.rst: add a note about ZONE_MOVABLE and page pinning Pavel Tatashin
2021-01-22  3:37 ` [PATCH v7 11/14] mm/gup: change index type to long as it counts pages Pavel Tatashin
2021-01-22  3:37 ` [PATCH v7 12/14] mm/gup: longterm pin migration cleanup Pavel Tatashin
2021-01-22  3:37 ` [PATCH v7 13/14] selftests/vm: test flag is broken Pavel Tatashin
2021-01-24 23:03   ` John Hubbard
2021-01-25 14:16     ` Pavel Tatashin
2021-01-22  3:37 ` Pavel Tatashin [this message]
2021-01-24 23:18   ` [PATCH v7 14/14] selftests/vm: test faulting in kernel, and verify pinnable pages John Hubbard
2021-01-24 23:40     ` John Hubbard
2021-01-25 14:17     ` Pavel Tatashin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210122033748.924330-15-pasha.tatashin@soleen.com \
    --to=pasha.tatashin@soleen.com \
    --cc=akpm@linux-foundation.org \
    --cc=dan.j.williams@intel.com \
    --cc=david@redhat.com \
    --cc=iamjoonsoo.kim@lge.com \
    --cc=ira.weiny@intel.com \
    --cc=jgg@ziepe.ca \
    --cc=jhubbard@nvidia.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mgorman@suse.de \
    --cc=mhocko@suse.com \
    --cc=mike.kravetz@oracle.com \
    --cc=mingo@redhat.com \
    --cc=osalvador@suse.de \
    --cc=peterz@infradead.org \
    --cc=rientjes@google.com \
    --cc=rostedt@goodmis.org \
    --cc=sashal@kernel.org \
    --cc=tyhicks@linux.microsoft.com \
    --cc=vbabka@suse.cz \
    --cc=willy@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).