From: Mark Brown <broonie@kernel.org> To: Liam Girdwood <lgirdwood@gmail.com> Cc: linux-kernel@vger.kernel.org, Mark Brown <broonie@kernel.org>, Marek Szyprowski <m.szyprowski@samsung.com> Subject: [PATCH] regulator: Fix lockdep warning resolving supplies Date: Fri, 22 Jan 2021 13:20:42 +0000 Message-ID: <20210122132042.10306-1-broonie@kernel.org> (raw) With commit eaa7995c529b54 (regulator: core: avoid regulator_resolve_supply() race condition) we started holding the rdev lock while resolving supplies, an operation that requires holding the regulator_list_mutex. This results in lockdep warnings since in other places we take the list mutex then the mutex on an individual rdev. Since the goal is to make sure that we don't call set_supply() twice rather than a concern about the cost of resolution pull the rdev lock and check for duplicate resolution down to immediately before we do the set_supply() and drop it again once the allocation is done. Fixes: eaa7995c529b54 (regulator: core: avoid regulator_resolve_supply() race condition) Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org> --- drivers/regulator/core.c | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 3ae5ccd9277d..3b73634d50ff 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1823,17 +1823,6 @@ static int regulator_resolve_supply(struct regulator_dev *rdev) if (rdev->supply) return 0; - /* - * Recheck rdev->supply with rdev->mutex lock held to avoid a race - * between rdev->supply null check and setting rdev->supply in - * set_supply() from concurrent tasks. - */ - regulator_lock(rdev); - - /* Supply just resolved by a concurrent task? */ - if (rdev->supply) - goto out; - r = regulator_dev_lookup(dev, rdev->supply_name); if (IS_ERR(r)) { ret = PTR_ERR(r); @@ -1885,12 +1874,29 @@ static int regulator_resolve_supply(struct regulator_dev *rdev) goto out; } + /* + * Recheck rdev->supply with rdev->mutex lock held to avoid a race + * between rdev->supply null check and setting rdev->supply in + * set_supply() from concurrent tasks. + */ + regulator_lock(rdev); + + /* Supply just resolved by a concurrent task? */ + if (rdev->supply) { + regulator_unlock(rdev); + put_device(&r->dev); + goto out; + } + ret = set_supply(rdev, r); if (ret < 0) { + regulator_unlock(rdev); put_device(&r->dev); goto out; } + regulator_unlock(rdev); + /* * In set_machine_constraints() we may have turned this regulator on * but we couldn't propagate to the supply if it hadn't been resolved @@ -1906,7 +1912,6 @@ static int regulator_resolve_supply(struct regulator_dev *rdev) } out: - regulator_unlock(rdev); return ret; } -- 2.20.1
next reply index Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-01-22 13:20 Mark Brown [this message] 2021-01-22 14:48 ` Mark Brown
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210122132042.10306-1-broonie@kernel.org \ --to=broonie@kernel.org \ --cc=lgirdwood@gmail.com \ --cc=linux-kernel@vger.kernel.org \ --cc=m.szyprowski@samsung.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
LKML Archive on lore.kernel.org Archives are clonable: git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \ linux-kernel@vger.kernel.org public-inbox-index lkml Example config snippet for mirrors Newsgroup available over NNTP: nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel AGPL code for this site: git clone https://public-inbox.org/public-inbox.git