linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Michal Hocko <mhocko@suse.com>
To: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Andrew Morton" <akpm@linux-foundation.org>,
	"Roman Gushchin" <guro@fb.com>,
	"Shakeel Butt" <shakeelb@google.com>,
	"Michal Koutný" <mkoutny@suse.com>, "Tejun Heo" <tj@kernel.org>,
	linux-mm@kvack.org, cgroups@vger.kernel.org,
	linux-kernel@vger.kernel.org, kernel-team@fb.com
Subject: Re: [PATCH] Revert "mm: memcontrol: avoid workload stalls when lowering memory.high"
Date: Mon, 25 Jan 2021 09:58:33 +0100	[thread overview]
Message-ID: <20210125085833.GA827@dhcp22.suse.cz> (raw)
In-Reply-To: <20210122184341.292461-1-hannes@cmpxchg.org>

On Fri 22-01-21 13:43:41, Johannes Weiner wrote:
> This reverts commit 536d3bf261a2fc3b05b3e91e7eef7383443015cf, as it
> can cause writers to memory.high to get stuck in the kernel forever,
> performing page reclaim and consuming excessive amounts of CPU cycles.
> 
> Before the patch, a write to memory.high would first put the new limit
> in place for the workload, and then reclaim the requested delta. After
> the patch, the kernel tries to reclaim the delta before putting the
> new limit into place, in order to not overwhelm the workload with a
> sudden, large excess over the limit. However, if reclaim is actively
> racing with new allocations from the uncurbed workload, it can keep
> the write() working inside the kernel indefinitely.
> 
> This is causing problems in Facebook production. A privileged
> system-level daemon that adjusts memory.high for various workloads
> running on a host can get unexpectedly stuck in the kernel and
> essentially turn into a sort of involuntary kswapd for one of the
> workloads. We've observed that daemon busy-spin in a write() for
> minutes at a time, neglecting its other duties on the system, and
> expending privileged system resources on behalf of a workload.
> 
> To remedy this, we have first considered changing the reclaim logic to
> break out after a couple of loops - whether the workload has converged
> to the new limit or not - and bound the write() call this way.
> However, the root cause that inspired the sequence change in the first
> place has been fixed through other means, and so a revert back to the
> proven limit-setting sequence, also used by memory.max, is preferable.
> 
> The sequence was changed to avoid extreme latencies in the workload
> when the limit was lowered: the sudden, large excess created by the
> limit lowering would erroneously trigger the penalty sleeping code
> that is meant to throttle excessive growth from below. Allocating
> threads could end up sleeping long after the write() had already
> reclaimed the delta for which they were being punished.
> 
> However, erroneous throttling also caused problems in other scenarios
> at around the same time. This resulted in commit b3ff92916af3 ("mm,
> memcg: reclaim more aggressively before high allocator throttling"),
> included in the same release as the offending commit. When allocating
> threads now encounter large excess caused by a racing write() to
> memory.high, instead of entering punitive sleeps, they will simply be
> tasked with helping reclaim down the excess, and will be held no
> longer than it takes to accomplish that. This is in line with regular
> limit enforcement - i.e. if the workload allocates up against or over
> an otherwise unchanged limit from below.
> 
> With the patch breaking userspace, and the root cause addressed by
> other means already, revert it again.
> 
> Fixes: 536d3bf261a2 ("mm: memcontrol: avoid workload stalls when lowering memory.high")
> Cc: <stable@vger.kernel.org> # 5.8+
> Reported-by: Tejun Heo <tj@kernel.org>
> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>

Acked-by: Michal Hocko <mhocko@suse.com>

Thanks for extending the changelog to describe the scenario in a more
detail.

> ---
>  mm/memcontrol.c | 5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)
> 
> Andrew, this is a replacement for
> mm-memcontrol-prevent-starvation-when-writing-memoryhigh.patch
> 
> diff --git a/mm/memcontrol.c b/mm/memcontrol.c
> index 605f671203ef..a8611a62bafd 100644
> --- a/mm/memcontrol.c
> +++ b/mm/memcontrol.c
> @@ -6273,6 +6273,8 @@ static ssize_t memory_high_write(struct kernfs_open_file *of,
>  	if (err)
>  		return err;
>  
> +	page_counter_set_high(&memcg->memory, high);
> +
>  	for (;;) {
>  		unsigned long nr_pages = page_counter_read(&memcg->memory);
>  		unsigned long reclaimed;
> @@ -6296,10 +6298,7 @@ static ssize_t memory_high_write(struct kernfs_open_file *of,
>  			break;
>  	}
>  
> -	page_counter_set_high(&memcg->memory, high);
> -
>  	memcg_wb_domain_size_changed(memcg);
> -
>  	return nbytes;
>  }
>  
> -- 
> 2.30.0
> 

-- 
Michal Hocko
SUSE Labs

  parent reply	other threads:[~2021-01-26  4:48 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-22 18:43 [PATCH] Revert "mm: memcontrol: avoid workload stalls when lowering memory.high" Johannes Weiner
2021-01-22 19:52 ` Roman Gushchin
2021-01-22 20:57 ` Shakeel Butt
2021-01-25  8:58 ` Michal Hocko [this message]
2021-01-25 14:00 ` Chris Down

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210125085833.GA827@dhcp22.suse.cz \
    --to=mhocko@suse.com \
    --cc=akpm@linux-foundation.org \
    --cc=cgroups@vger.kernel.org \
    --cc=guro@fb.com \
    --cc=hannes@cmpxchg.org \
    --cc=kernel-team@fb.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mkoutny@suse.com \
    --cc=shakeelb@google.com \
    --cc=tj@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).