From: Rob Herring <robh@kernel.org>
To: Jianjun Wang <jianjun.wang@mediatek.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
maz@kernel.org, Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Ryder Lee <ryder.lee@mediatek.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Matthias Brugger <matthias.bgg@gmail.com>,
linux-pci@vger.kernel.org, linux-mediatek@lists.infradead.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Sj Huang <sj.huang@mediatek.com>,
youlin.pei@mediatek.com, chuanjia.liu@mediatek.com,
qizhong.cheng@mediatek.com, sin_jieyang@mediatek.com,
drinkcat@chromium.org, Rex-BC.Chen@mediatek.com,
anson.chuang@mediatek.com
Subject: Re: [v7,1/7] dt-bindings: PCI: mediatek-gen3: Add YAML schema
Date: Mon, 25 Jan 2021 14:22:20 -0600 [thread overview]
Message-ID: <20210125202220.GA905995@robh.at.kernel.org> (raw)
In-Reply-To: <20210113114001.5804-2-jianjun.wang@mediatek.com>
On Wed, Jan 13, 2021 at 07:39:55PM +0800, Jianjun Wang wrote:
> Add YAML schemas documentation for Gen3 PCIe controller on
> MediaTek SoCs.
>
> Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
> Acked-by: Ryder Lee <ryder.lee@mediatek.com>
> ---
> .../bindings/pci/mediatek-pcie-gen3.yaml | 172 ++++++++++++++++++
> 1 file changed, 172 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
>
> diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
> new file mode 100644
> index 000000000000..f133fb0184f1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
> @@ -0,0 +1,172 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/mediatek-pcie-gen3.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Gen3 PCIe controller on MediaTek SoCs
> +
> +maintainers:
> + - Jianjun Wang <jianjun.wang@mediatek.com>
> +
> +description: |+
> + PCIe Gen3 MAC controller for MediaTek SoCs, it supports Gen3 speed
> + and compatible with Gen2, Gen1 speed.
> +
> + This PCIe controller supports up to 256 MSI vectors, the MSI hardware
> + block diagram is as follows:
> +
> + +-----+
> + | GIC |
> + +-----+
> + ^
> + |
> + port->irq
> + |
> + +-+-+-+-+-+-+-+-+
> + |0|1|2|3|4|5|6|7| (PCIe intc)
> + +-+-+-+-+-+-+-+-+
> + ^ ^ ^
> + | | ... |
> + +-------+ +------+ +-----------+
> + | | |
> + +-+-+---+--+--+ +-+-+---+--+--+ +-+-+---+--+--+
> + |0|1|...|30|31| |0|1|...|30|31| |0|1|...|30|31| (MSI sets)
> + +-+-+---+--+--+ +-+-+---+--+--+ +-+-+---+--+--+
> + ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
> + | | | | | | | | | | | | (MSI vectors)
> + | | | | | | | | | | | |
> +
> + (MSI SET0) (MSI SET1) ... (MSI SET7)
> +
> + With 256 MSI vectors supported, the MSI vectors are composed of 8 sets,
> + each set has its own address for MSI message, and supports 32 MSI vectors
> + to generate interrupt.
> +
> +allOf:
> + - $ref: /schemas/pci/pci-bus.yaml#
> +
> +properties:
> + compatible:
> + const: mediatek,mt8192-pcie
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + ranges:
> + minItems: 1
> + maxItems: 8
> +
> + resets:
> + minItems: 1
> + maxItems: 2
Why the range? The SoC either has the reset lines or it doesn't.
> +
> + reset-names:
> + anyOf:
> + - const: mac
> + - const: phy
I don't think this should stay, but if so, better expressed like this:
minItems: 1
maxItems: 2
items:
enum: [ mac, phy ]
> +
> + clocks:
> + maxItems: 6
> +
> + clock-names:
> + items:
> + - const: pl_250m
> + - const: tl_26m
> + - const: tl_96m
> + - const: tl_32k
> + - const: peri_26m
> + - const: top_133m
> +
> + assigned-clocks:
> + maxItems: 1
> +
> + assigned-clock-parents:
> + maxItems: 1
> +
> + phys:
> + maxItems: 1
> +
> + '#interrupt-cells':
> + const: 1
> +
> + interrupt-controller:
> + description: Interrupt controller node for handling legacy PCI interrupts.
> + type: object
> + properties:
> + '#address-cells':
> + const: 0
> + '#interrupt-cells':
> + const: 1
> + interrupt-controller: true
> +
> + required:
> + - '#address-cells'
> + - '#interrupt-cells'
> + - interrupt-controller
> +
> + additionalProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - ranges
> + - clocks
> + - '#interrupt-cells'
> + - interrupt-controller
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> +
> + bus {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + pcie: pcie@11230000 {
> + compatible = "mediatek,mt8192-pcie";
> + device_type = "pci";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + reg = <0x00 0x11230000 0x00 0x4000>;
> + reg-names = "pcie-mac";
Not documented. Drop.
> + interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>;
> + bus-range = <0x00 0xff>;
> + ranges = <0x82000000 0x00 0x12000000 0x00
> + 0x12000000 0x00 0x1000000>;
> + clocks = <&infracfg 44>,
> + <&infracfg 40>,
> + <&infracfg 43>,
> + <&infracfg 97>,
> + <&infracfg 99>,
> + <&infracfg 111>;
> + clock-names = "pl_250m", "tl_26m", "tl_96m",
> + "tl_32k", "peri_26m", "top_133m";
> + assigned-clocks = <&topckgen 50>;
> + assigned-clock-parents = <&topckgen 91>;
> +
> + phys = <&pciephy>;
> + phy-names = "pcie-phy";
> + resets = <&infracfg_rst 0>;
> + reset-names = "phy";
> +
> + #interrupt-cells = <1>;
> + interrupt-map-mask = <0 0 0 0x7>;
> + interrupt-map = <0 0 0 1 &pcie_intc 0>,
> + <0 0 0 2 &pcie_intc 1>,
> + <0 0 0 3 &pcie_intc 2>,
> + <0 0 0 4 &pcie_intc 3>;
> + pcie_intc: interrupt-controller {
> + #address-cells = <0>;
> + #interrupt-cells = <1>;
> + interrupt-controller;
> + };
> + };
> + };
> --
> 2.25.1
>
next prev parent reply other threads:[~2021-01-25 20:25 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-13 11:39 [v7,0/7] PCI: mediatek: Add new generation controller support Jianjun Wang
2021-01-13 11:39 ` [v7,1/7] dt-bindings: PCI: mediatek-gen3: Add YAML schema Jianjun Wang
2021-01-25 20:22 ` Rob Herring [this message]
2021-01-26 12:01 ` Jianjun Wang
2021-01-13 11:39 ` [v7,2/7] PCI: Export pci_pio_to_address() for module use Jianjun Wang
2021-01-13 11:39 ` [v7,3/7] PCI: mediatek-gen3: Add MediaTek Gen3 driver for MT8192 Jianjun Wang
2021-01-25 19:54 ` Rob Herring
2021-01-26 11:42 ` Jianjun Wang
2021-01-13 11:39 ` [v7,4/7] PCI: mediatek-gen3: Add INTx support Jianjun Wang
2021-01-26 12:25 ` Marc Zyngier
2021-01-27 13:09 ` Jianjun Wang
2021-01-13 11:39 ` [v7,5/7] PCI: mediatek-gen3: Add MSI support Jianjun Wang
2021-01-26 13:57 ` Marc Zyngier
2021-01-27 12:31 ` Jianjun Wang
2021-01-27 13:05 ` Marc Zyngier
2021-01-27 13:17 ` Jianjun Wang
2021-01-13 11:40 ` [v7,6/7] PCI: mediatek-gen3: Add system PM support Jianjun Wang
2021-01-13 11:40 ` [v7,7/7] MAINTAINERS: Add Jianjun Wang as MediaTek PCI co-maintainer Jianjun Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210125202220.GA905995@robh.at.kernel.org \
--to=robh@kernel.org \
--cc=Rex-BC.Chen@mediatek.com \
--cc=anson.chuang@mediatek.com \
--cc=bhelgaas@google.com \
--cc=chuanjia.liu@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=drinkcat@chromium.org \
--cc=jianjun.wang@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=maz@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=qizhong.cheng@mediatek.com \
--cc=ryder.lee@mediatek.com \
--cc=sin_jieyang@mediatek.com \
--cc=sj.huang@mediatek.com \
--cc=youlin.pei@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).