LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Tudor Ambarus <tudor.ambarus@microchip.com>
To: <mturquette@baylibre.com>, <sboyd@kernel.org>,
	<nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
	<ludovic.desroches@microchip.com>, <gregkh@linuxfoundation.org>,
	<saravanak@google.com>, <geert@linux-m68k.org>
Cc: <mirq-linux@rere.qmqm.pl>, <claudiu.beznea@microchip.com>,
	<a.fatoum@pengutronix.de>, <krzk@kernel.org>,
	<codrin.ciubotariu@microchip.com>, <linux-clk@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	"Tudor Ambarus" <tudor.ambarus@microchip.com>
Subject: [PATCH] clk: at91: Fix the declaration of the clocks
Date: Wed, 3 Feb 2021 17:43:32 +0200
Message-ID: <20210203154332.470587-1-tudor.ambarus@microchip.com> (raw)

These are all "early clocks" that require initialization just at
of_clk_init() time. Use CLK_OF_DECLARE() to declare them.

This also fixes a problem that was spotted when fw_devlink was
set to 'on' by default: the boards failed to boot. The reason is
that CLK_OF_DECLARE_DRIVER() clears the OF_POPULATED and causes
the consumers of the clock to be postponed by fw_devlink until
the second initialization routine of the clock has been completed.
One of the consumers of the clock is the timer, which is used as a
clocksource, and needs the clock initialized early. Postponing the
timers caused the fail at boot.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
Tested on sama5d2_xplained.

 drivers/clk/at91/at91rm9200.c  |  3 +--
 drivers/clk/at91/at91sam9260.c | 16 ++++++++--------
 drivers/clk/at91/at91sam9g45.c |  3 +--
 drivers/clk/at91/at91sam9n12.c |  3 +--
 drivers/clk/at91/at91sam9rl.c  |  3 ++-
 drivers/clk/at91/at91sam9x5.c  | 20 ++++++++++----------
 drivers/clk/at91/sama5d2.c     |  3 ++-
 drivers/clk/at91/sama5d3.c     |  2 +-
 drivers/clk/at91/sama5d4.c     |  3 ++-
 9 files changed, 28 insertions(+), 28 deletions(-)

diff --git a/drivers/clk/at91/at91rm9200.c b/drivers/clk/at91/at91rm9200.c
index 0fad1009f315..428a6f4b9ebc 100644
--- a/drivers/clk/at91/at91rm9200.c
+++ b/drivers/clk/at91/at91rm9200.c
@@ -215,5 +215,4 @@ static void __init at91rm9200_pmc_setup(struct device_node *np)
  * deferring properly. Once this is fixed, this can be switched to a platform
  * driver.
  */
-CLK_OF_DECLARE_DRIVER(at91rm9200_pmc, "atmel,at91rm9200-pmc",
-		      at91rm9200_pmc_setup);
+CLK_OF_DECLARE(at91rm9200_pmc, "atmel,at91rm9200-pmc", at91rm9200_pmc_setup);
diff --git a/drivers/clk/at91/at91sam9260.c b/drivers/clk/at91/at91sam9260.c
index ceb5495f723a..b29843bea278 100644
--- a/drivers/clk/at91/at91sam9260.c
+++ b/drivers/clk/at91/at91sam9260.c
@@ -491,26 +491,26 @@ static void __init at91sam9260_pmc_setup(struct device_node *np)
 {
 	at91sam926x_pmc_setup(np, &at91sam9260_data);
 }
-CLK_OF_DECLARE_DRIVER(at91sam9260_pmc, "atmel,at91sam9260-pmc",
-		      at91sam9260_pmc_setup);
+
+CLK_OF_DECLARE(at91sam9260_pmc, "atmel,at91sam9260-pmc", at91sam9260_pmc_setup);
 
 static void __init at91sam9261_pmc_setup(struct device_node *np)
 {
 	at91sam926x_pmc_setup(np, &at91sam9261_data);
 }
-CLK_OF_DECLARE_DRIVER(at91sam9261_pmc, "atmel,at91sam9261-pmc",
-		      at91sam9261_pmc_setup);
+
+CLK_OF_DECLARE(at91sam9261_pmc, "atmel,at91sam9261-pmc", at91sam9261_pmc_setup);
 
 static void __init at91sam9263_pmc_setup(struct device_node *np)
 {
 	at91sam926x_pmc_setup(np, &at91sam9263_data);
 }
-CLK_OF_DECLARE_DRIVER(at91sam9263_pmc, "atmel,at91sam9263-pmc",
-		      at91sam9263_pmc_setup);
+
+CLK_OF_DECLARE(at91sam9263_pmc, "atmel,at91sam9263-pmc", at91sam9263_pmc_setup);
 
 static void __init at91sam9g20_pmc_setup(struct device_node *np)
 {
 	at91sam926x_pmc_setup(np, &at91sam9g20_data);
 }
-CLK_OF_DECLARE_DRIVER(at91sam9g20_pmc, "atmel,at91sam9g20-pmc",
-		      at91sam9g20_pmc_setup);
+
+CLK_OF_DECLARE(at91sam9g20_pmc, "atmel,at91sam9g20-pmc", at91sam9g20_pmc_setup);
diff --git a/drivers/clk/at91/at91sam9g45.c b/drivers/clk/at91/at91sam9g45.c
index 0214333dedd3..15da0dfe3ef2 100644
--- a/drivers/clk/at91/at91sam9g45.c
+++ b/drivers/clk/at91/at91sam9g45.c
@@ -228,5 +228,4 @@ static void __init at91sam9g45_pmc_setup(struct device_node *np)
  * The TCB is used as the clocksource so its clock is needed early. This means
  * this can't be a platform driver.
  */
-CLK_OF_DECLARE_DRIVER(at91sam9g45_pmc, "atmel,at91sam9g45-pmc",
-		      at91sam9g45_pmc_setup);
+CLK_OF_DECLARE(at91sam9g45_pmc, "atmel,at91sam9g45-pmc", at91sam9g45_pmc_setup);
diff --git a/drivers/clk/at91/at91sam9n12.c b/drivers/clk/at91/at91sam9n12.c
index f9db5316a7f1..7fe435f4b46b 100644
--- a/drivers/clk/at91/at91sam9n12.c
+++ b/drivers/clk/at91/at91sam9n12.c
@@ -255,5 +255,4 @@ static void __init at91sam9n12_pmc_setup(struct device_node *np)
  * The TCB is used as the clocksource so its clock is needed early. This means
  * this can't be a platform driver.
  */
-CLK_OF_DECLARE_DRIVER(at91sam9n12_pmc, "atmel,at91sam9n12-pmc",
-		      at91sam9n12_pmc_setup);
+CLK_OF_DECLARE(at91sam9n12_pmc, "atmel,at91sam9n12-pmc", at91sam9n12_pmc_setup);
diff --git a/drivers/clk/at91/at91sam9rl.c b/drivers/clk/at91/at91sam9rl.c
index 66736e03cfef..ecbabf5162bd 100644
--- a/drivers/clk/at91/at91sam9rl.c
+++ b/drivers/clk/at91/at91sam9rl.c
@@ -186,4 +186,5 @@ static void __init at91sam9rl_pmc_setup(struct device_node *np)
 err_free:
 	kfree(at91sam9rl_pmc);
 }
-CLK_OF_DECLARE_DRIVER(at91sam9rl_pmc, "atmel,at91sam9rl-pmc", at91sam9rl_pmc_setup);
+
+CLK_OF_DECLARE(at91sam9rl_pmc, "atmel,at91sam9rl-pmc", at91sam9rl_pmc_setup);
diff --git a/drivers/clk/at91/at91sam9x5.c b/drivers/clk/at91/at91sam9x5.c
index 79b9d3667228..5cce48c64ea2 100644
--- a/drivers/clk/at91/at91sam9x5.c
+++ b/drivers/clk/at91/at91sam9x5.c
@@ -302,33 +302,33 @@ static void __init at91sam9g15_pmc_setup(struct device_node *np)
 {
 	at91sam9x5_pmc_setup(np, at91sam9g15_periphck, true);
 }
-CLK_OF_DECLARE_DRIVER(at91sam9g15_pmc, "atmel,at91sam9g15-pmc",
-		      at91sam9g15_pmc_setup);
+
+CLK_OF_DECLARE(at91sam9g15_pmc, "atmel,at91sam9g15-pmc", at91sam9g15_pmc_setup);
 
 static void __init at91sam9g25_pmc_setup(struct device_node *np)
 {
 	at91sam9x5_pmc_setup(np, at91sam9g25_periphck, false);
 }
-CLK_OF_DECLARE_DRIVER(at91sam9g25_pmc, "atmel,at91sam9g25-pmc",
-		      at91sam9g25_pmc_setup);
+
+CLK_OF_DECLARE(at91sam9g25_pmc, "atmel,at91sam9g25-pmc", at91sam9g25_pmc_setup);
 
 static void __init at91sam9g35_pmc_setup(struct device_node *np)
 {
 	at91sam9x5_pmc_setup(np, at91sam9g35_periphck, true);
 }
-CLK_OF_DECLARE_DRIVER(at91sam9g35_pmc, "atmel,at91sam9g35-pmc",
-		      at91sam9g35_pmc_setup);
+
+CLK_OF_DECLARE(at91sam9g35_pmc, "atmel,at91sam9g35-pmc", at91sam9g35_pmc_setup);
 
 static void __init at91sam9x25_pmc_setup(struct device_node *np)
 {
 	at91sam9x5_pmc_setup(np, at91sam9x25_periphck, false);
 }
-CLK_OF_DECLARE_DRIVER(at91sam9x25_pmc, "atmel,at91sam9x25-pmc",
-		      at91sam9x25_pmc_setup);
+
+CLK_OF_DECLARE(at91sam9x25_pmc, "atmel,at91sam9x25-pmc", at91sam9x25_pmc_setup);
 
 static void __init at91sam9x35_pmc_setup(struct device_node *np)
 {
 	at91sam9x5_pmc_setup(np, at91sam9x35_periphck, true);
 }
-CLK_OF_DECLARE_DRIVER(at91sam9x35_pmc, "atmel,at91sam9x35-pmc",
-		      at91sam9x35_pmc_setup);
+
+CLK_OF_DECLARE(at91sam9x35_pmc, "atmel,at91sam9x35-pmc", at91sam9x35_pmc_setup);
diff --git a/drivers/clk/at91/sama5d2.c b/drivers/clk/at91/sama5d2.c
index 9a5cbc7cd55a..3d1f78176c3e 100644
--- a/drivers/clk/at91/sama5d2.c
+++ b/drivers/clk/at91/sama5d2.c
@@ -372,4 +372,5 @@ static void __init sama5d2_pmc_setup(struct device_node *np)
 err_free:
 	kfree(sama5d2_pmc);
 }
-CLK_OF_DECLARE_DRIVER(sama5d2_pmc, "atmel,sama5d2-pmc", sama5d2_pmc_setup);
+
+CLK_OF_DECLARE(sama5d2_pmc, "atmel,sama5d2-pmc", sama5d2_pmc_setup);
diff --git a/drivers/clk/at91/sama5d3.c b/drivers/clk/at91/sama5d3.c
index 87009ee8effc..d376257807d2 100644
--- a/drivers/clk/at91/sama5d3.c
+++ b/drivers/clk/at91/sama5d3.c
@@ -255,4 +255,4 @@ static void __init sama5d3_pmc_setup(struct device_node *np)
  * The TCB is used as the clocksource so its clock is needed early. This means
  * this can't be a platform driver.
  */
-CLK_OF_DECLARE_DRIVER(sama5d3_pmc, "atmel,sama5d3-pmc", sama5d3_pmc_setup);
+CLK_OF_DECLARE(sama5d3_pmc, "atmel,sama5d3-pmc", sama5d3_pmc_setup);
diff --git a/drivers/clk/at91/sama5d4.c b/drivers/clk/at91/sama5d4.c
index 57fff790188b..5cbaac68da44 100644
--- a/drivers/clk/at91/sama5d4.c
+++ b/drivers/clk/at91/sama5d4.c
@@ -286,4 +286,5 @@ static void __init sama5d4_pmc_setup(struct device_node *np)
 err_free:
 	kfree(sama5d4_pmc);
 }
-CLK_OF_DECLARE_DRIVER(sama5d4_pmc, "atmel,sama5d4-pmc", sama5d4_pmc_setup);
+
+CLK_OF_DECLARE(sama5d4_pmc, "atmel,sama5d4-pmc", sama5d4_pmc_setup);
-- 
2.25.1


             reply index

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-03 15:43 Tudor Ambarus [this message]
2021-02-03 18:15 ` Saravana Kannan
2021-02-04 12:46   ` Eugen.Hristev
2021-02-04 13:54 ` Nicolas Ferre
2021-02-08  9:49 ` Tudor.Ambarus
2021-02-10  0:54   ` Stephen Boyd
2021-02-10  0:56     ` Saravana Kannan
2021-02-10  8:51       ` Geert Uytterhoeven
2021-02-10  8:57         ` Saravana Kannan
2021-02-10  9:10           ` Geert Uytterhoeven
2021-02-10  9:00         ` Greg Kroah-Hartman
2021-02-10 16:22           ` Rob Herring
2021-02-10  0:56 ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210203154332.470587-1-tudor.ambarus@microchip.com \
    --to=tudor.ambarus@microchip.com \
    --cc=a.fatoum@pengutronix.de \
    --cc=alexandre.belloni@bootlin.com \
    --cc=claudiu.beznea@microchip.com \
    --cc=codrin.ciubotariu@microchip.com \
    --cc=geert@linux-m68k.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=krzk@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ludovic.desroches@microchip.com \
    --cc=mirq-linux@rere.qmqm.pl \
    --cc=mturquette@baylibre.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=saravanak@google.com \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git
	git clone --mirror https://lore.kernel.org/lkml/10 lkml/git/10.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git