From: Sean Christopherson <seanjc@google.com>
To: Paolo Bonzini <pbonzini@redhat.com>, Jiri Kosina <trivial@kernel.org>
Cc: Sean Christopherson <seanjc@google.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>,
Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>, Joerg Roedel <joro@8bytes.org>,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/9] KVM: SVM: Move AVIC vCPU kicking snippet to helper function
Date: Thu, 4 Feb 2021 16:57:42 -0800 [thread overview]
Message-ID: <20210205005750.3841462-2-seanjc@google.com> (raw)
In-Reply-To: <20210205005750.3841462-1-seanjc@google.com>
Add a helper function to handle kicking non-running vCPUs when sending
virtual IPIs. A future patch will change SVM's interception functions
to take @vcpu instead of @svm, at which piont declaring and modifying
'vcpu' in a case statement is confusing, and potentially dangerous.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
---
arch/x86/kvm/svm/avic.c | 35 +++++++++++++++++++----------------
1 file changed, 19 insertions(+), 16 deletions(-)
diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c
index 0ef84d57b72e..78bdcfac4e40 100644
--- a/arch/x86/kvm/svm/avic.c
+++ b/arch/x86/kvm/svm/avic.c
@@ -298,6 +298,23 @@ static int avic_init_backing_page(struct kvm_vcpu *vcpu)
return 0;
}
+static void avic_kick_target_vcpus(struct kvm *kvm, struct kvm_lapic *source,
+ u32 icrl, u32 icrh)
+{
+ struct kvm_vcpu *vcpu;
+ int i;
+
+ kvm_for_each_vcpu(i, vcpu, kvm) {
+ bool m = kvm_apic_match_dest(vcpu, source,
+ icrl & APIC_SHORT_MASK,
+ GET_APIC_DEST_FIELD(icrh),
+ icrl & APIC_DEST_MASK);
+
+ if (m && !avic_vcpu_is_running(vcpu))
+ kvm_vcpu_wake_up(vcpu);
+ }
+}
+
int avic_incomplete_ipi_interception(struct vcpu_svm *svm)
{
u32 icrh = svm->vmcb->control.exit_info_1 >> 32;
@@ -324,28 +341,14 @@ int avic_incomplete_ipi_interception(struct vcpu_svm *svm)
kvm_lapic_reg_write(apic, APIC_ICR2, icrh);
kvm_lapic_reg_write(apic, APIC_ICR, icrl);
break;
- case AVIC_IPI_FAILURE_TARGET_NOT_RUNNING: {
- int i;
- struct kvm_vcpu *vcpu;
- struct kvm *kvm = svm->vcpu.kvm;
- struct kvm_lapic *apic = svm->vcpu.arch.apic;
-
+ case AVIC_IPI_FAILURE_TARGET_NOT_RUNNING:
/*
* At this point, we expect that the AVIC HW has already
* set the appropriate IRR bits on the valid target
* vcpus. So, we just need to kick the appropriate vcpu.
*/
- kvm_for_each_vcpu(i, vcpu, kvm) {
- bool m = kvm_apic_match_dest(vcpu, apic,
- icrl & APIC_SHORT_MASK,
- GET_APIC_DEST_FIELD(icrh),
- icrl & APIC_DEST_MASK);
-
- if (m && !avic_vcpu_is_running(vcpu))
- kvm_vcpu_wake_up(vcpu);
- }
+ avic_kick_target_vcpus(svm->vcpu.kvm, apic, icrl, icrh);
break;
- }
case AVIC_IPI_FAILURE_INVALID_TARGET:
WARN_ONCE(1, "Invalid IPI target: index=%u, vcpu=%d, icr=%#0x:%#0x\n",
index, svm->vcpu.vcpu_id, icrh, icrl);
--
2.30.0.365.g02bc693789-goog
next prev parent reply other threads:[~2021-02-05 1:00 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-05 0:57 [PATCH 0/9] KVM: x86: Move common exit handlers to x86.c Sean Christopherson
2021-02-05 0:57 ` Sean Christopherson [this message]
2021-02-05 0:57 ` [PATCH 2/9] KVM: SVM: Remove an unnecessary forward declaration Sean Christopherson
2021-02-05 0:57 ` [PATCH 3/9] KVM: SVM: Pass @vcpu to exit handlers (and many, many other places) Sean Christopherson
2021-02-05 0:57 ` [PATCH 4/9] KVM: nSVM: Add VMLOAD/VMSAVE helper to deduplicate code Sean Christopherson
2021-02-05 0:57 ` [PATCH 5/9] KVM: x86: Move XSETBV emulation to common code Sean Christopherson
2021-02-05 0:57 ` [PATCH 6/9] KVM: x86: Move trivial instruction-based exit handlers " Sean Christopherson
2021-02-05 0:57 ` [PATCH 7/9] KVM: x86: Move RDPMC emulation " Sean Christopherson
2021-02-05 0:57 ` [PATCH 8/9] KVM: SVM: Don't manually emulate RDPMC if nrips=0 Sean Christopherson
2021-02-05 0:57 ` [PATCH 9/9] KVM: SVM: Skip intercepted PAUSE instructions after emulation Sean Christopherson
2021-02-05 8:20 ` [PATCH 0/9] KVM: x86: Move common exit handlers to x86.c Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210205005750.3841462-2-seanjc@google.com \
--to=seanjc@google.com \
--cc=jmattson@google.com \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=trivial@kernel.org \
--cc=vkuznets@redhat.com \
--cc=wanpengli@tencent.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).