From: Tony Lindgren <tony@atomide.com>
To: Amit Kucheria <amitk@kernel.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>,
Keerthy <j-keerthy@ti.com>,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-omap@vger.kernel.org, Adam Ford <aford173@gmail.com>,
Carl Philipp Klemm <philipp@uvos.xyz>,
"H . Nikolaus Schaller" <hns@goldelico.com>,
Merlijn Wajer <merlijn@wizzup.org>, Pavel Machek <pavel@ucw.cz>,
Peter Ujfalusi <peter.ujfalusi@gmail.com>,
Sebastian Reichel <sre@kernel.org>
Subject: [PATCH 4/4] thermal: ti-soc-thermal: Use non-inverted define for omap4
Date: Fri, 5 Feb 2021 15:45:34 +0200 [thread overview]
Message-ID: <20210205134534.49200-5-tony@atomide.com> (raw)
In-Reply-To: <20210205134534.49200-1-tony@atomide.com>
When we set bit 10 high we use continuous mode and not single
mode. Let's correct this to avoid confusion. No functional
changes here, the code does the right thing with bit 10.
Cc: Adam Ford <aford173@gmail.com>
Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/thermal/ti-soc-thermal/omap4-thermal-data.c | 4 ++--
drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c b/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c
--- a/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c
+++ b/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c
@@ -24,7 +24,7 @@ omap4430_mpu_temp_sensor_registers = {
.bgap_dtemp_mask = OMAP4430_BGAP_TEMP_SENSOR_DTEMP_MASK,
.bgap_mode_ctrl = OMAP4430_TEMP_SENSOR_CTRL_OFFSET,
- .mode_ctrl_mask = OMAP4430_SINGLE_MODE_MASK,
+ .mode_ctrl_mask = OMAP4430_CONTINUOUS_MODE_MASK,
.bgap_efuse = OMAP4430_FUSE_OPP_BGAP,
};
@@ -97,7 +97,7 @@ omap4460_mpu_temp_sensor_registers = {
.mask_cold_mask = OMAP4460_MASK_COLD_MASK,
.bgap_mode_ctrl = OMAP4460_BGAP_CTRL_OFFSET,
- .mode_ctrl_mask = OMAP4460_SINGLE_MODE_MASK,
+ .mode_ctrl_mask = OMAP4460_CONTINUOUS_MODE_MASK,
.bgap_counter = OMAP4460_BGAP_COUNTER_OFFSET,
.counter_mask = OMAP4460_COUNTER_MASK,
diff --git a/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h b/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h
--- a/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h
+++ b/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h
@@ -40,7 +40,7 @@
/* OMAP4430.TEMP_SENSOR bits */
#define OMAP4430_BGAP_TEMPSOFF_MASK BIT(12)
#define OMAP4430_BGAP_TSHUT_MASK BIT(11)
-#define OMAP4430_SINGLE_MODE_MASK BIT(10)
+#define OMAP4430_CONTINUOUS_MODE_MASK BIT(10)
#define OMAP4430_BGAP_TEMP_SENSOR_SOC_MASK BIT(9)
#define OMAP4430_BGAP_TEMP_SENSOR_EOCZ_MASK BIT(8)
#define OMAP4430_BGAP_TEMP_SENSOR_DTEMP_MASK (0xff << 0)
@@ -113,7 +113,7 @@
#define OMAP4460_BGAP_TEMP_SENSOR_DTEMP_MASK (0x3ff << 0)
/* OMAP4460.BANDGAP_CTRL bits */
-#define OMAP4460_SINGLE_MODE_MASK BIT(31)
+#define OMAP4460_CONTINUOUS_MODE_MASK BIT(31)
#define OMAP4460_MASK_HOT_MASK BIT(1)
#define OMAP4460_MASK_COLD_MASK BIT(0)
--
2.30.0
next prev parent reply other threads:[~2021-02-06 0:03 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-05 13:45 [PATCHv2 0/4] Thermal fixes for omaps for single mode read Tony Lindgren
2021-02-05 13:45 ` [PATCH 1/4] thermal: ti-soc-thermal: Skip pointless register access for dra7 Tony Lindgren
2021-02-05 13:45 ` [PATCH 2/4] thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430 Tony Lindgren
2021-02-05 13:45 ` [PATCH 3/4] thermal: ti-soc-thermal: Simplify polling with iopoll Tony Lindgren
2021-02-06 13:02 ` Adam Ford
2021-02-05 13:45 ` Tony Lindgren [this message]
2021-02-06 8:50 ` [PATCH 4/4] thermal: ti-soc-thermal: Use non-inverted define for omap4 Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210205134534.49200-5-tony@atomide.com \
--to=tony@atomide.com \
--cc=aford173@gmail.com \
--cc=amitk@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=edubezval@gmail.com \
--cc=hns@goldelico.com \
--cc=j-keerthy@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=merlijn@wizzup.org \
--cc=pavel@ucw.cz \
--cc=peter.ujfalusi@gmail.com \
--cc=philipp@uvos.xyz \
--cc=rui.zhang@intel.com \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).