From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org,
Christoph Schemmel <christoph.schemmel@gmail.com>,
Johan Hovold <johan@kernel.org>
Subject: [PATCH 4.4 18/38] USB: serial: option: Adding support for Cinterion MV31
Date: Mon, 8 Feb 2021 16:00:40 +0100 [thread overview]
Message-ID: <20210208145806.011526929@linuxfoundation.org> (raw)
In-Reply-To: <20210208145805.279815326@linuxfoundation.org>
From: Christoph Schemmel <christoph.schemmel@gmail.com>
commit e478d6029dca9d8462f426aee0d32896ef64f10f upstream.
Adding support for Cinterion device MV31 for enumeration with
PID 0x00B3 and 0x00B7.
usb-devices output for 0x00B3
T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=1e2d ProdID=00b3 Rev=04.14
S: Manufacturer=Cinterion
S: Product=Cinterion PID 0x00B3 USB Mobile Broadband
S: SerialNumber=b3246eed
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=cdc_wdm
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
usb-devices output for 0x00B7
T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=1e2d ProdID=00b7 Rev=04.14
S: Manufacturer=Cinterion
S: Product=Cinterion PID 0x00B3 USB Mobile Broadband
S: SerialNumber=b3246eed
C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=896mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
Signed-off-by: Christoph Schemmel <christoph.schemmel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -425,6 +425,8 @@ static void option_instat_callback(struc
#define CINTERION_PRODUCT_AHXX_2RMNET 0x0084
#define CINTERION_PRODUCT_AHXX_AUDIO 0x0085
#define CINTERION_PRODUCT_CLS8 0x00b0
+#define CINTERION_PRODUCT_MV31_MBIM 0x00b3
+#define CINTERION_PRODUCT_MV31_RMNET 0x00b7
/* Olivetti products */
#define OLIVETTI_VENDOR_ID 0x0b3c
@@ -1896,6 +1898,10 @@ static const struct usb_device_id option
{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDMNET) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, /* HC28 enumerates with Siemens or Cinterion VID depending on FW revision */
{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
+ { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV31_MBIM, 0xff),
+ .driver_info = RSVD(3)},
+ { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV31_RMNET, 0xff),
+ .driver_info = RSVD(0)},
{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100),
.driver_info = RSVD(4) },
{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD120),
next prev parent reply other threads:[~2021-02-08 15:23 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-08 15:00 [PATCH 4.4 00/38] 4.4.257-rc1 review Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 01/38] net_sched: reject silly cell_log in qdisc_get_rtab() Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 02/38] futex,rt_mutex: Provide futex specific rt_mutex API Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 03/38] futex: Remove rt_mutex_deadlock_account_*() Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 04/38] futex: Rework inconsistent rt_mutex/futex_q state Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 05/38] futex: Avoid violating the 10th rule of futex Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 06/38] futex: Replace pointless printk in fixup_owner() Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 07/38] futex: Provide and use pi_state_update_owner() Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 08/38] rtmutex: Remove unused argument from rt_mutex_proxy_unlock() Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 09/38] futex: Use pi_state_update_owner() in put_pi_state() Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 10/38] futex: Simplify fixup_pi_state_owner() Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 11/38] futex: Handle faults correctly for PI futexes Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 12/38] usb: udc: core: Use lock when write to soft_connect Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 13/38] scsi: libfc: Avoid invoking response handler twice if ep is already completed Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 14/38] scsi: ibmvfc: Set default timeout to avoid crash during migration Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 15/38] stable: clamp SUBLEVEL in 4.4 and 4.9 Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 16/38] USB: serial: cp210x: add pid/vid for WSDA-200-USB Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 17/38] USB: serial: cp210x: add new VID/PID for supporting Teraoka AD2000 Greg Kroah-Hartman
2021-02-08 15:00 ` Greg Kroah-Hartman [this message]
2021-02-08 15:00 ` [PATCH 4.4 19/38] Input: i8042 - unbreak Pegatron C15B Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 20/38] net: lapb: Copy the skb before sending a packet Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 21/38] ELF/MIPS build fix Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 22/38] elfcore: fix building with clang Greg Kroah-Hartman
2021-02-09 12:52 ` Pavel Machek
2021-02-09 13:01 ` Greg Kroah-Hartman
2021-02-09 19:10 ` Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 23/38] USB: gadget: legacy: fix an error code in eth_bind() Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 24/38] USB: usblp: dont call usb_set_interface if theres a single alt Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 25/38] usb: dwc2: Fix endpoint direction check in ep_from_windex Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 26/38] mac80211: fix station rate table updates on assoc Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 27/38] kretprobe: Avoid re-registration of the same kretprobe earlier Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 28/38] cifs: report error instead of invalid when revalidating a dentry fails Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 29/38] mmc: core: Limit retries when analyse of SDIO tuples fails Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 30/38] ARM: footbridge: fix dc21285 PCI configuration accessors Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 31/38] mm: hugetlbfs: fix cannot migrate the fallocated HugeTLB page Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 32/38] mm: hugetlb: fix a race between isolating and freeing page Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 33/38] mm: hugetlb: remove VM_BUG_ON_PAGE from page_huge_active Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 34/38] x86/build: Disable CET instrumentation in the kernel Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 35/38] x86/apic: Add extra serialization for non-serializing MSRs Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 36/38] Input: xpad - sync supported devices with fork on GitHub Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.4 37/38] ACPI: thermal: Do not call acpi_thermal_check() directly Greg Kroah-Hartman
2021-02-08 15:01 ` [PATCH 4.4 38/38] ALSA: hda/realtek - Fix typo of pincfg for Dell quirk Greg Kroah-Hartman
2021-02-08 18:36 ` [PATCH 4.4 00/38] 4.4.257-rc1 review Pavel Machek
2021-02-08 20:43 ` Shuah Khan
2021-02-09 18:09 ` Guenter Roeck
2021-02-10 5:04 ` Naresh Kamboju
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210208145806.011526929@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=christoph.schemmel@gmail.com \
--cc=johan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).