linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
To: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org,
	iommu@lists.linux-foundation.org
Subject: Re: [PATCH 4/6] MIPS: refactor the maybe coherent DMA indicators
Date: Tue, 9 Feb 2021 14:12:37 +0100	[thread overview]
Message-ID: <20210209131237.GB11915@alpha.franken.de> (raw)
In-Reply-To: <20210208145024.3320420-5-hch@lst.de>

On Mon, Feb 08, 2021 at 03:50:22PM +0100, Christoph Hellwig wrote:
> Replace the global coherentio enum, and the hw_coherentio (fake) boolean
> variables with a single boolean dma_default_coherent flag.  Only the
> malta setup code needs two additional local boolean variables to
> preserved the command line overrides.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
>  arch/mips/alchemy/common/setup.c      |  3 +--
>  arch/mips/include/asm/dma-coherence.h | 24 ++++--------------------
>  arch/mips/kernel/setup.c              |  8 +++-----
>  arch/mips/mm/c-r4k.c                  |  8 ++------
>  arch/mips/mti-malta/malta-setup.c     | 24 ++++++++++++++----------
>  arch/mips/pci/pci-alchemy.c           |  5 ++---
>  6 files changed, 26 insertions(+), 46 deletions(-)
> 
> diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
> index c2da68e7984450..39e5b9cd882b10 100644
> --- a/arch/mips/alchemy/common/setup.c
> +++ b/arch/mips/alchemy/common/setup.c
> @@ -65,8 +65,7 @@ void __init plat_mem_setup(void)
>  		/* Clear to obtain best system bus performance */
>  		clear_c0_config(1 << 19); /* Clear Config[OD] */
>  
> -	coherentio = alchemy_dma_coherent() ?
> -		IO_COHERENCE_ENABLED : IO_COHERENCE_DISABLED;
> +	dma_default_coherent = alchemy_dma_coherent();
>  
>  	board_setup();	/* board specific setup */
>  
> diff --git a/arch/mips/include/asm/dma-coherence.h b/arch/mips/include/asm/dma-coherence.h
> index 5eaa1fcc878a88..846c5ade30d12d 100644
> --- a/arch/mips/include/asm/dma-coherence.h
> +++ b/arch/mips/include/asm/dma-coherence.h
> @@ -9,30 +9,14 @@
>  #ifndef __ASM_DMA_COHERENCE_H
>  #define __ASM_DMA_COHERENCE_H
>  
> -enum coherent_io_user_state {
> -	IO_COHERENCE_DEFAULT,
> -	IO_COHERENCE_ENABLED,
> -	IO_COHERENCE_DISABLED,
> -};
> -
> -#if defined(CONFIG_DMA_PERDEV_COHERENT)
> -/* Don't provide (hw_)coherentio to avoid misuse */
> -#elif defined(CONFIG_DMA_MAYBE_COHERENT)
> -extern enum coherent_io_user_state coherentio;
> -extern int hw_coherentio;
> -
> +#ifdef CONFIG_DMA_MAYBE_COHERENT
> +extern bool dma_default_coherent;
>  static inline bool dev_is_dma_coherent(struct device *dev)
>  {
> -	return coherentio == IO_COHERENCE_ENABLED ||
> -		(coherentio == IO_COHERENCE_DEFAULT && hw_coherentio);
> +	return dma_default_coherent;

this breaks overriding of coherentio via command line. plat_mem_setup/
plat_setup_iocoherency is called before earlyparams are handled. So
changing coherentio after that doesn't have any effect.

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]

  reply	other threads:[~2021-02-09 13:13 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-08 14:50 MIPS noncoherent DMA cleanups Christoph Hellwig
2021-02-08 14:50 ` [PATCH 1/6] MIPS/malta: simplify plat_setup_iocoherency Christoph Hellwig
2021-02-08 14:50 ` [PATCH 2/6] MIPS/alchemy: factor out the DMA coherent setup Christoph Hellwig
2021-02-08 14:50 ` [PATCH 3/6] MIPS: move the {no,}nocoherentio options to the malta setup code Christoph Hellwig
2021-02-08 14:50 ` [PATCH 4/6] MIPS: refactor the maybe coherent DMA indicators Christoph Hellwig
2021-02-09 13:12   ` Thomas Bogendoerfer [this message]
2021-02-10  8:57     ` Christoph Hellwig
2021-02-08 14:50 ` [PATCH 5/6] driver core: lift dma_default_coherent into common code Christoph Hellwig
2021-02-08 15:00   ` Greg Kroah-Hartman
2021-02-08 15:57   ` Maciej W. Rozycki
2021-02-08 16:10     ` Christoph Hellwig
2021-02-09 11:23       ` Maciej W. Rozycki
2021-02-15 13:13         ` Maciej W. Rozycki
2021-02-21  3:32           ` Maciej W. Rozycki
2021-02-22  7:59             ` Christoph Hellwig
2021-02-22 10:42               ` Maciej W. Rozycki
2021-02-27 18:33                 ` Maciej W. Rozycki
2021-02-09 13:06   ` Thomas Bogendoerfer
2021-02-08 14:50 ` [PATCH 6/6] MIPS: remove CONFIG_DMA_PERDEV_COHERENT Christoph Hellwig
2021-02-09  1:36   ` Huacai Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210209131237.GB11915@alpha.franken.de \
    --to=tsbogend@alpha.franken.de \
    --cc=gregkh@linuxfoundation.org \
    --cc=hch@lst.de \
    --cc=iommu@lists.linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).