linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Rafał Miłecki" <zajec5@gmail.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Rob Herring <robh+dt@kernel.org>
Cc: "Boris Brezillon" <bbrezillon@kernel.org>,
	linux-mtd@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, "Rafał Miłecki" <rafal@milecki.pl>,
	"kernel test robot" <lkp@intel.com>
Subject: [PATCH V3 mtd/next 3/3] mtd: parsers: ofpart: support BCM4908 fixed partitions
Date: Thu, 11 Feb 2021 23:04:27 +0100	[thread overview]
Message-ID: <20210211220427.27104-3-zajec5@gmail.com> (raw)
In-Reply-To: <20210211220427.27104-1-zajec5@gmail.com>

From: Rafał Miłecki <rafal@milecki.pl>

BCM4908 partitioning is based on fixed layout but allows specifying
multiple firmware partitions. It requires detecting which firmware
partition was used for booting current kernel.

To support such cases without duplicating a lot of code (without copying
most of the ofpart.c code) support for post-parsing callback was added.

BCM4908 callback simply reads offset of currently used firmware
partition from the DT. Bootloader specifies it using the "brcm_blparms"
property.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
V3: Add #include "bcm4908-partitions.h" to fix:
drivers/mtd/parsers/bcm4908-partitions.c:45:5: warning: no previous prototype for function 'bcm4908_partitions_post_parse' [-Wmissing-prototypes]
Reported-by: kernel test robot <lkp@intel.com>
---
 drivers/mtd/parsers/Makefile             |  1 +
 drivers/mtd/parsers/bcm4908-partitions.c | 64 ++++++++++++++++++++++++
 drivers/mtd/parsers/bcm4908-partitions.h |  7 +++
 drivers/mtd/parsers/ofpart.c             | 28 ++++++++++-
 4 files changed, 98 insertions(+), 2 deletions(-)
 create mode 100644 drivers/mtd/parsers/bcm4908-partitions.c
 create mode 100644 drivers/mtd/parsers/bcm4908-partitions.h

diff --git a/drivers/mtd/parsers/Makefile b/drivers/mtd/parsers/Makefile
index 50eb0b0a2210..01972a5edc5c 100644
--- a/drivers/mtd/parsers/Makefile
+++ b/drivers/mtd/parsers/Makefile
@@ -4,6 +4,7 @@ obj-$(CONFIG_MTD_BCM47XX_PARTS)		+= bcm47xxpart.o
 obj-$(CONFIG_MTD_BCM63XX_PARTS)		+= bcm63xxpart.o
 obj-$(CONFIG_MTD_CMDLINE_PARTS)		+= cmdlinepart.o
 obj-$(CONFIG_MTD_OF_PARTS)		+= ofpart.o
+obj-$(CONFIG_MTD_OF_PARTS)		+= bcm4908-partitions.o
 obj-$(CONFIG_MTD_PARSER_IMAGETAG)	+= parser_imagetag.o
 obj-$(CONFIG_MTD_AFS_PARTS)		+= afs.o
 obj-$(CONFIG_MTD_PARSER_TRX)		+= parser_trx.o
diff --git a/drivers/mtd/parsers/bcm4908-partitions.c b/drivers/mtd/parsers/bcm4908-partitions.c
new file mode 100644
index 000000000000..40eb3b3801c3
--- /dev/null
+++ b/drivers/mtd/parsers/bcm4908-partitions.c
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/mtd/mtd.h>
+#include <linux/slab.h>
+#include <linux/mtd/partitions.h>
+
+#include "bcm4908-partitions.h"
+
+#define BLPARAMS_FW_OFFSET		"NAND_RFS_OFS"
+
+static long long bcm4908_partitions_fw_offset(void)
+{
+	struct device_node *root;
+	struct property *prop;
+	const char *s;
+
+	root = of_find_node_by_path("/");
+	if (!root)
+		return -ENOENT;
+
+	of_property_for_each_string(root, "brcm_blparms", prop, s) {
+		size_t len = strlen(BLPARAMS_FW_OFFSET);
+		unsigned long offset;
+		int err;
+
+		if (strncmp(s, BLPARAMS_FW_OFFSET, len) || s[len] != '=')
+			continue;
+
+		err = kstrtoul(s + len + 1, 0, &offset);
+		if (err) {
+			pr_err("failed to parse %s\n", s + len + 1);
+			return err;
+		}
+
+		return offset << 10;
+	}
+
+	return -ENOENT;
+}
+
+int bcm4908_partitions_post_parse(struct mtd_info *mtd, struct mtd_partition *parts, int nr_parts)
+{
+	long long fw_offset;
+	int i;
+
+	fw_offset = bcm4908_partitions_fw_offset();
+
+	for (i = 0; i < nr_parts; i++) {
+		if (of_device_is_compatible(parts[i].of_node, "brcm,bcm4908-firmware")) {
+			if (fw_offset < 0 || parts[i].offset == fw_offset)
+				parts[i].name = "firmware";
+			else
+				parts[i].name = "backup";
+		}
+	}
+
+	return 0;
+}
diff --git a/drivers/mtd/parsers/bcm4908-partitions.h b/drivers/mtd/parsers/bcm4908-partitions.h
new file mode 100644
index 000000000000..df25f0487d0a
--- /dev/null
+++ b/drivers/mtd/parsers/bcm4908-partitions.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __BCM4908_PARTITIONS_H
+#define __BCM4908_PARTITIONS_H
+
+int bcm4908_partitions_post_parse(struct mtd_info *mtd, struct mtd_partition *parts, int nr_parts);
+
+#endif
diff --git a/drivers/mtd/parsers/ofpart.c b/drivers/mtd/parsers/ofpart.c
index daf507c123e6..6b221df8401c 100644
--- a/drivers/mtd/parsers/ofpart.c
+++ b/drivers/mtd/parsers/ofpart.c
@@ -16,6 +16,18 @@
 #include <linux/slab.h>
 #include <linux/mtd/partitions.h>
 
+#include "bcm4908-partitions.h"
+
+struct fixed_partitions_quirks {
+	int (*post_parse)(struct mtd_info *mtd, struct mtd_partition *parts, int nr_parts);
+};
+
+struct fixed_partitions_quirks bcm4908_partitions_quirks = {
+	.post_parse = bcm4908_partitions_post_parse,
+};
+
+static const struct of_device_id parse_ofpart_match_table[];
+
 static bool node_has_compatible(struct device_node *pp)
 {
 	return of_get_property(pp, "compatible", NULL);
@@ -25,6 +37,8 @@ static int parse_fixed_partitions(struct mtd_info *master,
 				  const struct mtd_partition **pparts,
 				  struct mtd_part_parser_data *data)
 {
+	const struct fixed_partitions_quirks *quirks;
+	const struct of_device_id *of_id;
 	struct mtd_partition *parts;
 	struct device_node *mtd_node;
 	struct device_node *ofpart_node;
@@ -33,7 +47,6 @@ static int parse_fixed_partitions(struct mtd_info *master,
 	int nr_parts, i, ret = 0;
 	bool dedicated = true;
 
-
 	/* Pull of_node from the master device node */
 	mtd_node = mtd_get_of_node(master);
 	if (!mtd_node)
@@ -50,11 +63,16 @@ static int parse_fixed_partitions(struct mtd_info *master,
 			 master->name, mtd_node);
 		ofpart_node = mtd_node;
 		dedicated = false;
-	} else if (!of_device_is_compatible(ofpart_node, "fixed-partitions")) {
+	}
+
+	of_id = of_match_node(parse_ofpart_match_table, ofpart_node);
+	if (dedicated && !of_id) {
 		/* The 'partitions' subnode might be used by another parser */
 		return 0;
 	}
 
+	quirks = of_id ? of_id->data : NULL;
+
 	/* First count the subnodes */
 	nr_parts = 0;
 	for_each_child_of_node(ofpart_node,  pp) {
@@ -126,6 +144,9 @@ static int parse_fixed_partitions(struct mtd_info *master,
 	if (!nr_parts)
 		goto ofpart_none;
 
+	if (quirks && quirks->post_parse)
+		quirks->post_parse(master, parts, nr_parts);
+
 	*pparts = parts;
 	return nr_parts;
 
@@ -140,7 +161,10 @@ static int parse_fixed_partitions(struct mtd_info *master,
 }
 
 static const struct of_device_id parse_ofpart_match_table[] = {
+	/* Generic */
 	{ .compatible = "fixed-partitions" },
+	/* Customized */
+	{ .compatible = "brcm,bcm4908-partitions", .data = &bcm4908_partitions_quirks, },
 	{},
 };
 MODULE_DEVICE_TABLE(of, parse_ofpart_match_table);
-- 
2.26.2


      parent reply	other threads:[~2021-02-11 22:06 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-11 22:04 [PATCH V3 mtd/next 1/3] dt-bindings: mtd: move partition binding to its own file Rafał Miłecki
2021-02-11 22:04 ` [PATCH V3 mtd/next 2/3] dt-bindings: mtd: add binding for BCM4908 partitions Rafał Miłecki
2021-02-11 22:04 ` Rafał Miłecki [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210211220427.27104-3-zajec5@gmail.com \
    --to=zajec5@gmail.com \
    --cc=bbrezillon@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=lkp@intel.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=rafal@milecki.pl \
    --cc=richard@nod.at \
    --cc=robh+dt@kernel.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).