linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: <kostap@marvell.com>
To: <linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <lkundrak@v3.sk>, <linux@armlinux.org.uk>,
	<sebastian.hesselbarth@gmail.com>, <gregory.clement@bootlin.com>,
	<andrew@lunn.ch>, <robh+dt@kernel.org>, <vkoul@kernel.org>,
	<kishon@ti.com>, <miquel.raynal@bootlin.com>, <mw@semihalf.com>,
	<jaz@semihalf.com>, <nadavh@marvell.com>, <stefanc@marvell.com>,
	<bpeled@marvell.com>,
	"Konstantin Porotchkin" <kostap@marvell.com>
Subject: [PATCH v2 4/4] arch/arm64: dts: enable CP110 UTMI driver
Date: Sun, 14 Feb 2021 18:01:08 +0200	[thread overview]
Message-ID: <20210214160108.3879-5-kostap@marvell.com> (raw)
In-Reply-To: <20210214160108.3879-1-kostap@marvell.com>

From: Konstantin Porotchkin <kostap@marvell.com>

Enable support for CP110 UTMI driver in Armada SoC family platform
device trees.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
---
 arch/arm64/boot/dts/marvell/armada-7040-db.dts     | 14 +++++++++----
 arch/arm64/boot/dts/marvell/armada-8040-db.dts     | 21 ++++++++++++++++++--
 arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi | 19 ++++++++++++++++--
 arch/arm64/boot/dts/marvell/cn9130-db.dts          | 12 +++++++++--
 arch/arm64/boot/dts/marvell/cn9131-db.dts          |  9 +++++++--
 arch/arm64/boot/dts/marvell/cn9132-db.dts          | 11 ++++++++--
 6 files changed, 72 insertions(+), 14 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index a7eb4e7697a2..51f3e2907597 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -218,6 +218,10 @@
 	};
 };
 
+&cp0_utmi {
+	status = "okay";
+};
+
 &cp0_comphy1 {
 	cp0_usbh0_con: connector {
 		compatible = "usb-a-connector";
@@ -226,8 +230,9 @@
 };
 
 &cp0_usb3_0 {
-	phys = <&cp0_comphy1 0>;
-	phy-names = "cp0-usb3h0-comphy";
+	phys = <&cp0_comphy1 0>, <&cp0_utmi0>;
+	phy-names = "cp0-usb3h0-comphy", "utmi";
+	dr_mode = "host";
 	status = "okay";
 };
 
@@ -239,8 +244,9 @@
 };
 
 &cp0_usb3_1 {
-	phys = <&cp0_comphy4 1>;
-	phy-names = "cp0-usb3h1-comphy";
+	phys = <&cp0_comphy4 1>, <&cp0_utmi1>;
+	phy-names = "cp0-usb3h1-comphy", "utmi";
+	dr_mode = "host";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index 09fb5256f1db..e39e1efc95b6 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -154,8 +154,15 @@
 };
 
 /* CON9 on CP0 expansion */
+&cp0_utmi {
+	status = "okay";
+};
+
 &cp0_usb3_0 {
 	usb-phy = <&cp0_usb3_0_phy>;
+	phys = <&cp0_utmi0>;
+	phy-names = "utmi";
+	dr_mode = "host";
 	status = "okay";
 };
 
@@ -168,8 +175,9 @@
 
 /* CON10 on CP0 expansion */
 &cp0_usb3_1 {
-	phys = <&cp0_comphy4 1>;
-	phy-names = "cp0-usb3h1-comphy";
+	phys = <&cp0_comphy4 1>, <&cp0_utmi1>;
+	phy-names = "usb", "utmi";
+	dr_mode = "host";
 	status = "okay";
 };
 
@@ -306,14 +314,23 @@
 	};
 };
 
+&cp1_utmi {
+	status = "okay";
+};
+
 /* CON9 on CP1 expansion */
 &cp1_usb3_0 {
 	usb-phy = <&cp1_usb3_0_phy>;
+	phys = <&cp1_utmi0>;
+	phy-names = "utmi";
+	dr_mode = "host";
 	status = "okay";
 };
 
 /* CON10 on CP1 expansion */
 &cp1_usb3_1 {
+	phys = <&cp1_utmi1>;
+	phy-names = "utmi";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
index cbcb210cb6d8..adbfecc678b5 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -259,13 +259,23 @@
 	vqmmc-supply = <&v_3_3>;
 };
 
+&cp0_utmi {
+	status = "okay";
+};
+
 &cp0_usb3_0 {
 	/* J38? - USB2.0 only */
+	phys = <&cp0_utmi0>;
+	phy-names = "utmi";
+	dr_mode = "host";
 	status = "okay";
 };
 
 &cp0_usb3_1 {
 	/* J38? - USB2.0 only */
+	phys = <&cp0_utmi1>;
+	phy-names = "utmi";
+	dr_mode = "host";
 	status = "okay";
 };
 
@@ -364,9 +374,14 @@
 	};
 };
 
+&cp1_utmi {
+	status = "okay";
+};
+
 &cp1_usb3_0 {
 	/* CPS Lane 2 - CON7 */
-	phys = <&cp1_comphy2 0>;
-	phy-names = "cp1-usb3h0-comphy";
+	phys = <&cp1_comphy2 0>, <&cp1_utmi0>;
+	phy-names = "cp1-usb3h0-comphy", "utmi";
+	dr_mode = "host";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dts b/arch/arm64/boot/dts/marvell/cn9130-db.dts
index ce49a70d88a0..62fa6ecc0acd 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-db.dts
+++ b/arch/arm64/boot/dts/marvell/cn9130-db.dts
@@ -390,14 +390,22 @@
 	};
 };
 
+&cp0_utmi {
+	status = "okay";
+};
+
 &cp0_usb3_0 {
 	status = "okay";
 	usb-phy = <&cp0_usb3_0_phy0>;
-	phy-names = "usb";
+	phys = <&cp0_utmi0>;
+	phy-names = "utmi";
+	dr_mode = "host";
 };
 
 &cp0_usb3_1 {
 	status = "okay";
 	usb-phy = <&cp0_usb3_0_phy1>;
-	phy-names = "usb";
+	phys =  <&cp0_utmi1>;
+	phy-names = "utmi";
+	dr_mode = "host";
 };
diff --git a/arch/arm64/boot/dts/marvell/cn9131-db.dts b/arch/arm64/boot/dts/marvell/cn9131-db.dts
index 3c975f98b2a3..ba2d4e1da159 100644
--- a/arch/arm64/boot/dts/marvell/cn9131-db.dts
+++ b/arch/arm64/boot/dts/marvell/cn9131-db.dts
@@ -193,10 +193,15 @@
 };
 
 /* CON58 */
+&cp1_utmi {
+	status = "okay";
+};
+
 &cp1_usb3_1 {
 	status = "okay";
 	usb-phy = <&cp1_usb3_0_phy0>;
 	/* Generic PHY, providing serdes lanes */
-	phys = <&cp1_comphy3 1>;
-	phy-names = "usb";
+	phys = <&cp1_comphy3 1>, <&cp1_utmi1>;
+	phy-names = "usb", "utmi";
+	dr_mode = "host";
 };
diff --git a/arch/arm64/boot/dts/marvell/cn9132-db.dts b/arch/arm64/boot/dts/marvell/cn9132-db.dts
index 4ef0df3097ca..81fba024b22d 100644
--- a/arch/arm64/boot/dts/marvell/cn9132-db.dts
+++ b/arch/arm64/boot/dts/marvell/cn9132-db.dts
@@ -205,17 +205,24 @@
 	};
 };
 
+&cp2_utmi {
+	status = "okay";
+};
+
 &cp2_usb3_0 {
 	status = "okay";
 	usb-phy = <&cp2_usb3_0_phy0>;
+	phys = <&cp2_utmi0>;
 	phy-names = "usb";
+	dr_mode = "host";
 };
 
 /* SLM-1521-V2, CON11 */
 &cp2_usb3_1 {
 	status = "okay";
 	usb-phy = <&cp2_usb3_0_phy1>;
-	phy-names = "usb";
 	/* Generic PHY, providing serdes lanes */
-	phys = <&cp2_comphy3 1>;
+	phys = <&cp2_comphy3 1>, <&cp2_utmi1>;
+	phy-names = "usb", "utmi";
+	dr_mode = "host";
 };
-- 
2.17.1


      parent reply	other threads:[~2021-02-14 16:03 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-14 16:01 [PATCH v2 0/4] Add support for CP110 UTMI PHY kostap
2021-02-14 16:01 ` [PATCH v2 1/4] drivers: phy: add support for Armada " kostap
2021-02-21 13:12   ` kernel test robot
2021-02-21 13:23   ` kernel test robot
2021-02-14 16:01 ` [PATCH v2 2/4] devicetree/bindings: add support for CP110 UTMI driver kostap
2021-03-05 21:34   ` Rob Herring
2021-02-14 16:01 ` [PATCH v2 3/4] arch/arm64: dts: add support for Marvell " kostap
2021-02-14 16:01 ` kostap [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210214160108.3879-5-kostap@marvell.com \
    --to=kostap@marvell.com \
    --cc=andrew@lunn.ch \
    --cc=bpeled@marvell.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregory.clement@bootlin.com \
    --cc=jaz@semihalf.com \
    --cc=kishon@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=lkundrak@v3.sk \
    --cc=miquel.raynal@bootlin.com \
    --cc=mw@semihalf.com \
    --cc=nadavh@marvell.com \
    --cc=robh+dt@kernel.org \
    --cc=sebastian.hesselbarth@gmail.com \
    --cc=stefanc@marvell.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).