From: Ansuel Smith <ansuelsmth@gmail.com>
To: Richard Weinberger <richard@nod.at>
Cc: Ansuel Smith <ansuelsmth@gmail.com>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Vignesh Raghavendra <vigneshr@ti.com>,
Rob Herring <robh+dt@kernel.org>,
Boris Brezillon <bbrezillon@kernel.org>,
linux-mtd@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 3/3] dt-bindings: mtd: Document use of nvmem-partitions compatible
Date: Tue, 16 Feb 2021 20:56:11 +0100 [thread overview]
Message-ID: <20210216195618.27959-4-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20210216195618.27959-1-ansuelsmth@gmail.com>
Document nvmem-partitions compatible used to treat mtd partitions as a
nvmem provider.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
.../mtd/partitions/nvmem-partitions.yaml | 105 ++++++++++++++++++
1 file changed, 105 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/partitions/nvmem-partitions.yaml
diff --git a/Documentation/devicetree/bindings/mtd/partitions/nvmem-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/nvmem-partitions.yaml
new file mode 100644
index 000000000000..1ff283febcaa
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/nvmem-partitions.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/nvmem-partitions.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nvmem partitions
+
+description: |
+ This binding can be used to treat the specific partition as a nvmem provider.
+ Each direct subnodes represents the nvmem cells and won't be parsed as fixed-partitions.
+ Fixed-partitions bindings described in fixed-partitions.yaml apply to the nvmem provider node.
+
+maintainers:
+ - Ansuel Smith <ansuelsmth@gmail.com>
+
+properties:
+ compatible:
+ const: nvmem-partitions
+
+ "#address-cells": true
+
+ "#size-cells": true
+
+ reg:
+ description: partition's offset and size within the flash
+ maxItems: 1
+
+required:
+ - compatible
+ - "#address-cells"
+ - "#size-cells"
+ - reg
+
+additionalProperties: true
+
+examples:
+ - |
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* ... */
+
+ };
+ art: art@1200000 {
+ compatible = "nvmem-partitions";
+ reg = <0x1200000 0x0140000>;
+ label = "art";
+ read-only;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_gmac1: macaddr_gmac1@0 {
+ reg = <0x0 0x6>;
+ };
+
+ macaddr_gmac2: macaddr_gmac2@6 {
+ reg = <0x6 0x6>;
+ };
+
+ pre_cal_24g: pre_cal_24g@1000 {
+ reg = <0x1000 0x2f20>;
+ };
+
+ pre_cal_5g: pre_cal_5g@5000{
+ reg = <0x5000 0x2f20>;
+ };
+ };
+ - |
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0x000000 0x100000>;
+ read-only;
+ };
+
+ firmware@100000 {
+ compatible = "brcm,trx";
+ label = "firmware";
+ reg = <0x100000 0xe00000>;
+ };
+
+ calibration@f00000 {
+ compatible = "nvmem-partitions";
+ label = "calibration";
+ reg = <0xf00000 0x100000>;
+ ranges = <0 0xf00000 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ wifi0@0 {
+ reg = <0x000000 0x080000>;
+ };
+
+ wifi1@80000 {
+ reg = <0x080000 0x080000>;
+ };
+ };
+ };
--
2.30.0
prev parent reply other threads:[~2021-02-16 19:57 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-16 19:56 [PATCH 0/3] Implement nvmem support for mtd Ansuel Smith
2021-02-16 19:56 ` [PATCH 1/3] mtd: partitions: ofpart: skip subnodes parse with compatible Ansuel Smith
2021-02-16 19:56 ` [PATCH 2/3] mtd: core: add nvmem-partitions compatible to parse mtd as nvmem cells Ansuel Smith
2021-02-16 21:10 ` kernel test robot
2021-02-16 19:56 ` Ansuel Smith [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210216195618.27959-4-ansuelsmth@gmail.com \
--to=ansuelsmth@gmail.com \
--cc=bbrezillon@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).