From: Hayes Wang <hayeswang@realtek.com>
To: <netdev@vger.kernel.org>
Cc: <nic_swsd@realtek.com>, <linux-kernel@vger.kernel.org>,
<linux-usb@vger.kernel.org>, Hayes Wang <hayeswang@realtek.com>
Subject: [PATCH net-next 4/4] r8152: spilt rtl_set_eee_plus and r8153b_green_en
Date: Fri, 19 Feb 2021 17:04:43 +0800 [thread overview]
Message-ID: <1394712342-15778-345-Taiwan-albertk@realtek.com> (raw)
Message-ID: <20210219090443.a8dacy2xV34857SSrAVIdr_D3tyBb1HWhkYYU12G7Ao@z> (raw)
In-Reply-To: <1394712342-15778-341-Taiwan-albertk@realtek.com>
Add rtl_eee_plus_en() and rtl_green_en().
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
drivers/net/usb/r8152.c | 43 ++++++++++++++++++++++++++---------------
1 file changed, 27 insertions(+), 16 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 82a129264e31..b246817f3405 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -2632,21 +2632,24 @@ static inline u8 rtl8152_get_speed(struct r8152 *tp)
return ocp_read_byte(tp, MCU_TYPE_PLA, PLA_PHYSTATUS);
}
-static void rtl_set_eee_plus(struct r8152 *tp)
+static void rtl_eee_plus_en(struct r8152 *tp, bool enable)
{
u32 ocp_data;
- u8 speed;
- speed = rtl8152_get_speed(tp);
- if (speed & _10bps) {
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR);
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR);
+ if (enable)
ocp_data |= EEEP_CR_EEEP_TX;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data);
- } else {
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR);
+ else
ocp_data &= ~EEEP_CR_EEEP_TX;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data);
- }
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data);
+}
+
+static void rtl_set_eee_plus(struct r8152 *tp)
+{
+ if (rtl8152_get_speed(tp) & _10bps)
+ rtl_eee_plus_en(tp, true);
+ else
+ rtl_eee_plus_en(tp, false);
}
static void rxdy_gated_en(struct r8152 *tp, bool enable)
@@ -3150,10 +3153,22 @@ static void r8153b_ups_flags(struct r8152 *tp)
ocp_write_dword(tp, MCU_TYPE_USB, USB_UPS_FLAGS, ups_flags);
}
-static void r8153b_green_en(struct r8152 *tp, bool enable)
+static void rtl_green_en(struct r8152 *tp, bool enable)
{
u16 data;
+ data = sram_read(tp, SRAM_GREEN_CFG);
+ if (enable)
+ data |= GREEN_ETH_EN;
+ else
+ data &= ~GREEN_ETH_EN;
+ sram_write(tp, SRAM_GREEN_CFG, data);
+
+ tp->ups_info.green = enable;
+}
+
+static void r8153b_green_en(struct r8152 *tp, bool enable)
+{
if (enable) {
sram_write(tp, 0x8045, 0); /* 10M abiq&ldvbias */
sram_write(tp, 0x804d, 0x1222); /* 100M short abiq&ldvbias */
@@ -3164,11 +3179,7 @@ static void r8153b_green_en(struct r8152 *tp, bool enable)
sram_write(tp, 0x805d, 0x2444); /* 1000M short abiq&ldvbias */
}
- data = sram_read(tp, SRAM_GREEN_CFG);
- data |= GREEN_ETH_EN;
- sram_write(tp, SRAM_GREEN_CFG, data);
-
- tp->ups_info.green = enable;
+ rtl_green_en(tp, true);
}
static u16 r8153_phy_status(struct r8152 *tp, u16 desired)
--
2.26.2
next prev parent reply other threads:[~2021-02-19 9:11 UTC|newest]
Thread overview: 89+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-21 12:40 [PATCH net 0/9] r8152: serial fixes Hayes Wang
2020-01-21 12:40 ` [PATCH net 1/9] r8152: fix runtime resume for linking change Hayes Wang
2020-01-22 9:47 ` Sergei Shtylyov
2020-01-21 12:40 ` [PATCH net 2/9] r8152: reset flow control patch when linking on for RTL8153B Hayes Wang
2020-01-21 12:54 ` David Miller
2020-01-21 13:01 ` Joe Perches
2020-01-21 13:19 ` Hayes Wang
2020-01-21 12:40 ` [PATCH net 3/9] r8152: get default setting of WOL before initializing Hayes Wang
2021-02-19 9:04 ` [PATCH net-next 0/4] r8152: minor adjustments Hayes Wang
2021-02-23 20:40 ` patchwork-bot+netdevbpf
2020-01-21 12:40 ` [PATCH net 4/9] r8152: disable U2P3 for RTL8153B Hayes Wang
2021-02-19 9:04 ` [PATCH net-next 1/4] r8152: enable U1/U2 for USB_SPEED_SUPER Hayes Wang
2020-01-21 12:40 ` [PATCH net 5/9] r8152: Disable PLA MCU clock speed down Hayes Wang
2021-02-19 9:04 ` [PATCH net-next 2/4] r8152: check if the pointer of the function exists Hayes Wang
2020-01-21 12:40 ` [PATCH net 6/9] r8152: disable test IO for RTL8153B Hayes Wang
2021-02-19 9:04 ` [PATCH net-next 3/4] r8152: replace netif_err with dev_err Hayes Wang
2020-01-21 12:40 ` Hayes Wang [this message]
2021-02-19 9:04 ` [PATCH net-next 4/4] r8152: spilt rtl_set_eee_plus and r8153b_green_en Hayes Wang
2020-01-21 12:40 ` [PATCH net 8/9] r8152: avoid the MCU to clear the lanwake Hayes Wang
2021-02-19 9:38 ` [PATCH net] r8152: move r8153_mac_clk_spd Hayes Wang
2021-02-19 18:22 ` Jakub Kicinski
2021-02-22 6:19 ` Hayes Wang
2020-01-21 12:40 ` [PATCH net 9/9] r8152: disable DelayPhyPwrChg Hayes Wang
2020-01-22 7:02 ` Grant Grundler
2020-01-22 7:50 ` Hayes Wang
2021-03-03 8:39 ` [PATCH net] Revert "r8152: adjust the settings about MAC clock speed down for RTL8153" Hayes Wang
2021-03-04 1:00 ` patchwork-bot+netdevbpf
2020-01-22 1:41 ` [PATCH net v2 0/9] r8152: serial fixes Hayes Wang
2020-01-22 1:41 ` [PATCH net v2 1/9] r8152: fix runtime resume for linking change Hayes Wang
2021-03-19 7:37 ` [PATCH net] r8152: limit the RX buffer size of RTL8153A for USB 2.0 Hayes Wang
2020-01-22 1:41 ` [PATCH net v2 2/9] r8152: reset flow control patch when linking on for RTL8153B Hayes Wang
2021-04-16 8:04 ` [PATCH net-next 0/6] r8152: support new chips Hayes Wang
2021-04-16 22:40 ` patchwork-bot+netdevbpf
2020-01-22 1:41 ` [PATCH net v2 3/9] r8152: get default setting of WOL before initializing Hayes Wang
2021-04-16 8:04 ` [PATCH net-next 1/6] r8152: set inter fram gap time depending on speed Hayes Wang
2020-01-22 1:41 ` [PATCH net v2 4/9] r8152: disable U2P3 for RTL8153B Hayes Wang
2021-04-16 8:04 ` [PATCH net-next 2/6] r8152: adjust rtl8152_check_firmware function Hayes Wang
2020-01-22 1:41 ` [PATCH net v2 5/9] r8152: Disable PLA MCU clock speed down Hayes Wang
2021-04-16 8:04 ` [PATCH net-next 3/6] r8152: add help function to change mtu Hayes Wang
2020-01-22 1:41 ` [PATCH net v2 6/9] r8152: disable test IO for RTL8153B Hayes Wang
2021-04-16 8:04 ` [PATCH net-next 4/6] r8152: support new chips Hayes Wang
2021-04-16 21:50 ` Jakub Kicinski
2021-04-20 7:00 ` Hayes Wang
2021-04-20 18:34 ` Jakub Kicinski
2021-04-21 2:23 ` Hayes Wang
2020-01-22 1:41 ` [PATCH net v2 7/9] r8152: don't enable U1U2 with USB_SPEED_HIGH for RTL8153B Hayes Wang
2021-04-16 8:04 ` [PATCH net-next 5/6] r8152: support PHY firmware for RTL8156 series Hayes Wang
2020-01-22 1:41 ` [PATCH net v2 8/9] r8152: avoid the MCU to clear the lanwake Hayes Wang
2021-04-16 8:04 ` [PATCH net-next 6/6] r8152: search the configuration of vendor mode Hayes Wang
2020-01-22 1:41 ` [PATCH net v2 9/9] r8152: disable DelayPhyPwrChg Hayes Wang
2021-03-05 9:34 ` [PATCH net] r8169: fix r8168fp_adjust_ocp_cmd function Hayes Wang
2021-03-05 11:48 ` Heiner Kallweit
2021-03-05 21:10 ` patchwork-bot+netdevbpf
2020-01-22 8:02 ` [PATCH net v3 0/9] r8152: serial fixes Hayes Wang
2020-01-22 8:02 ` [PATCH net v3 1/9] r8152: fix runtime resume for linking change Hayes Wang
2021-04-23 9:44 ` [PATCH net-next 0/2] r8152: adjust REALTEK_USB_DEVICE Hayes Wang
2021-04-23 21:00 ` patchwork-bot+netdevbpf
2020-01-22 8:02 ` [PATCH net v3 2/9] r8152: reset flow control patch when linking on for RTL8153B Hayes Wang
2021-04-23 9:44 ` [PATCH net-next 1/2] r8152: remove NCM mode from REALTEK_USB_DEVICE macro Hayes Wang
2020-01-22 8:02 ` [PATCH net v3 3/9] r8152: get default setting of WOL before initializing Hayes Wang
2021-04-23 9:44 ` [PATCH net-next 2/2] r8152: redefine REALTEK_USB_DEVICE macro Hayes Wang
2020-01-22 8:02 ` [PATCH net v3 4/9] r8152: disable U2P3 for RTL8153B Hayes Wang
2021-04-24 6:09 ` [PATCH net-next] r8152: remove some bit operations Hayes Wang
2021-04-26 1:30 ` patchwork-bot+netdevbpf
2020-01-22 8:02 ` [PATCH net v3 5/9] r8152: Disable PLA MCU clock speed down Hayes Wang
2021-05-21 9:07 ` [PATCH net] r8152: check the informaton of the device Hayes Wang
2021-05-21 9:42 ` Greg KH
2021-05-22 3:13 ` Hayes Wang
2020-01-22 8:02 ` [PATCH net v3 6/9] r8152: disable test IO for RTL8153B Hayes Wang
2021-05-22 5:24 ` [PATCH net v2] r8152: check the informaton of the device Hayes Wang
2021-05-22 7:32 ` Greg KH
2021-05-22 8:07 ` Johan Hovold
2021-05-24 1:49 ` Hayes Wang
2021-05-24 7:44 ` Johan Hovold
2020-01-22 8:02 ` [PATCH net v3 7/9] r8152: don't enable U1U2 with USB_SPEED_HIGH for RTL8153B Hayes Wang
2021-05-24 6:49 ` [PATCH net v3] r8152: check the informaton of the device Hayes Wang
2021-05-24 8:00 ` Johan Hovold
2021-05-24 8:54 ` Hayes Wang
2021-05-24 9:13 ` Johan Hovold
2021-05-24 20:20 ` patchwork-bot+netdevbpf
2020-01-22 8:02 ` [PATCH net v3 8/9] r8152: avoid the MCU to clear the lanwake Hayes Wang
2021-06-01 7:37 ` [PATCH net-next] r8152: support pauseparam of ethtool_ops Hayes Wang
2021-06-01 22:30 ` patchwork-bot+netdevbpf
2020-01-22 8:02 ` [PATCH net v3 9/9] r8152: disable DelayPhyPwrChg Hayes Wang
2021-06-17 10:00 ` [PATCH net-next] r8152: store the information of the pipes Hayes Wang
2021-06-17 19:20 ` patchwork-bot+netdevbpf
2020-01-23 10:21 ` [PATCH net v3 0/9] r8152: serial fixes David Miller
2021-04-22 8:48 ` [PATCH net-next] r8152: replace return with break for ram code speedup mode timeout Hayes Wang
2021-04-22 21:20 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1394712342-15778-345-Taiwan-albertk@realtek.com \
--to=hayeswang@realtek.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nic_swsd@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).