[PATCH 5.11 00/12] 5.11.1-rc1 review

[PATCH 5.11 00/12] 5.11.1-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.11.1 release.
There are 12 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 24 Feb 2021 12:07:46 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.11.1-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.11.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.11.1-rc1

Matwey V. Kornilov <matwey@sai.msu.ru>
    media: pwc: Use correct device for DMA

Trent Piepho <tpiepho@gmail.com>
    Bluetooth: btusb: Always fallback to alt 1 for WBS

Linus Torvalds <torvalds@linux-foundation.org>
    tty: protect tty_write from odd low-level tty disciplines

Jan Beulich <jbeulich@suse.com>
    xen-blkback: fix error handling in xen_blkbk_map()

Jan Beulich <jbeulich@suse.com>
    xen-scsiback: don't "handle" error by BUG()

Jan Beulich <jbeulich@suse.com>
    xen-netback: don't "handle" error by BUG()

Jan Beulich <jbeulich@suse.com>
    xen-blkback: don't "handle" error by BUG()

Stefano Stabellini <stefano.stabellini@xilinx.com>
    xen/arm: don't ignore return errors from set_phys_to_machine

Jan Beulich <jbeulich@suse.com>
    Xen/gntdev: correct error checking in gntdev_map_grant_pages()

Jan Beulich <jbeulich@suse.com>
    Xen/gntdev: correct dev_bus_addr handling in gntdev_map_grant_pages()

Jan Beulich <jbeulich@suse.com>
    Xen/x86: also check kernel mapping in set_foreign_p2m_mapping()

Jan Beulich <jbeulich@suse.com>
    Xen/x86: don't bail early from clear_foreign_p2m_mapping()


-------------

Diffstat:

 Makefile                            |  4 ++--
 arch/arm/xen/p2m.c                  |  6 ++++--
 arch/x86/xen/p2m.c                  | 15 +++++++--------
 drivers/block/xen-blkback/blkback.c | 32 ++++++++++++++++++--------------
 drivers/bluetooth/btusb.c           | 20 ++++++--------------
 drivers/media/usb/pwc/pwc-if.c      | 22 +++++++++++++---------
 drivers/net/xen-netback/netback.c   |  4 +---
 drivers/tty/tty_io.c                |  5 ++++-
 drivers/xen/gntdev.c                | 37 ++++++++++++++++++++-----------------
 drivers/xen/xen-scsiback.c          |  4 ++--
 include/xen/grant_table.h           |  1 +
 11 files changed, 78 insertions(+), 72 deletions(-)

[PATCH 5.11 01/12] Xen/x86: dont bail early from clear_foreign_p2m_mapping()

[Greg Kroah-Hartman]

From: Jan Beulich <jbeulich@suse.com>

commit a35f2ef3b7376bfd0a57f7844bd7454389aae1fc upstream.

Its sibling (set_foreign_p2m_mapping()) as well as the sibling of its
only caller (gnttab_map_refs()) don't clean up after themselves in case
of error. Higher level callers are expected to do so. However, in order
for that to really clean up any partially set up state, the operation
should not terminate upon encountering an entry in unexpected state. It
is particularly relevant to notice here that set_foreign_p2m_mapping()
would skip setting up a p2m entry if its grant mapping failed, but it
would continue to set up further p2m entries as long as their mappings
succeeded.

Arguably down the road set_foreign_p2m_mapping() may want its page state
related WARN_ON() also converted to an error return.

This is part of XSA-361.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/xen/p2m.c |   12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

--- a/arch/x86/xen/p2m.c
+++ b/arch/x86/xen/p2m.c
@@ -750,17 +750,15 @@ int clear_foreign_p2m_mapping(struct gnt
 		unsigned long mfn = __pfn_to_mfn(page_to_pfn(pages[i]));
 		unsigned long pfn = page_to_pfn(pages[i]);
 
-		if (mfn == INVALID_P2M_ENTRY || !(mfn & FOREIGN_FRAME_BIT)) {
+		if (mfn != INVALID_P2M_ENTRY && (mfn & FOREIGN_FRAME_BIT))
+			set_phys_to_machine(pfn, INVALID_P2M_ENTRY);
+		else
 			ret = -EINVAL;
-			goto out;
-		}
-
-		set_phys_to_machine(pfn, INVALID_P2M_ENTRY);
 	}
 	if (kunmap_ops)
 		ret = HYPERVISOR_grant_table_op(GNTTABOP_unmap_grant_ref,
-						kunmap_ops, count);
-out:
+						kunmap_ops, count) ?: ret;
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(clear_foreign_p2m_mapping);

[PATCH 5.11 02/12] Xen/x86: also check kernel mapping in set_foreign_p2m_mapping()

[Greg Kroah-Hartman]

From: Jan Beulich <jbeulich@suse.com>

commit b512e1b077e5ccdbd6e225b15d934ab12453b70a upstream.

We should not set up further state if either mapping failed; paying
attention to just the user mapping's status isn't enough.

Also use GNTST_okay instead of implying its value (zero).

This is part of XSA-361.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/xen/p2m.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/x86/xen/p2m.c
+++ b/arch/x86/xen/p2m.c
@@ -712,7 +712,8 @@ int set_foreign_p2m_mapping(struct gntta
 		unsigned long mfn, pfn;
 
 		/* Do not add to override if the map failed. */
-		if (map_ops[i].status)
+		if (map_ops[i].status != GNTST_okay ||
+		    (kmap_ops && kmap_ops[i].status != GNTST_okay))
 			continue;
 
 		if (map_ops[i].flags & GNTMAP_contains_pte) {

[PATCH 5.11 03/12] Xen/gntdev: correct dev_bus_addr handling in gntdev_map_grant_pages()

[Greg Kroah-Hartman]

From: Jan Beulich <jbeulich@suse.com>

commit dbe5283605b3bc12ca45def09cc721a0a5c853a2 upstream.

We may not skip setting the field in the unmap structure when
GNTMAP_device_map is in use - such an unmap would fail to release the
respective resources (a page ref in the hypervisor). Otoh the field
doesn't need setting at all when GNTMAP_device_map is not in use.

To record the value for unmapping, we also better don't use our local
p2m: In particular after a subsequent change it may not have got updated
for all the batch elements. Instead it can simply be taken from the
respective map's results.

We can additionally avoid playing this game altogether for the kernel
part of the mappings in (x86) PV mode.

This is part of XSA-361.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/xen/gntdev.c |   24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

--- a/drivers/xen/gntdev.c
+++ b/drivers/xen/gntdev.c
@@ -309,18 +309,25 @@ int gntdev_map_grant_pages(struct gntdev
 		 * to the kernel linear addresses of the struct pages.
 		 * These ptes are completely different from the user ptes dealt
 		 * with find_grant_ptes.
+		 * Note that GNTMAP_device_map isn't needed here: The
+		 * dev_bus_addr output field gets consumed only from ->map_ops,
+		 * and by not requesting it when mapping we also avoid needing
+		 * to mirror dev_bus_addr into ->unmap_ops (and holding an extra
+		 * reference to the page in the hypervisor).
 		 */
+		unsigned int flags = (map->flags & ~GNTMAP_device_map) |
+				     GNTMAP_host_map;
+
 		for (i = 0; i < map->count; i++) {
 			unsigned long address = (unsigned long)
 				pfn_to_kaddr(page_to_pfn(map->pages[i]));
 			BUG_ON(PageHighMem(map->pages[i]));
 
-			gnttab_set_map_op(&map->kmap_ops[i], address,
-				map->flags | GNTMAP_host_map,
+			gnttab_set_map_op(&map->kmap_ops[i], address, flags,
 				map->grants[i].ref,
 				map->grants[i].domid);
 			gnttab_set_unmap_op(&map->kunmap_ops[i], address,
-				map->flags | GNTMAP_host_map, -1);
+				flags, -1);
 		}
 	}
 
@@ -336,17 +343,12 @@ int gntdev_map_grant_pages(struct gntdev
 			continue;
 		}
 
+		if (map->flags & GNTMAP_device_map)
+			map->unmap_ops[i].dev_bus_addr = map->map_ops[i].dev_bus_addr;
+
 		map->unmap_ops[i].handle = map->map_ops[i].handle;
 		if (use_ptemod)
 			map->kunmap_ops[i].handle = map->kmap_ops[i].handle;
-#ifdef CONFIG_XEN_GRANT_DMA_ALLOC
-		else if (map->dma_vaddr) {
-			unsigned long bfn;
-
-			bfn = pfn_to_bfn(page_to_pfn(map->pages[i]));
-			map->unmap_ops[i].dev_bus_addr = __pfn_to_phys(bfn);
-		}
-#endif
 	}
 	return err;
 }

[PATCH 5.11 04/12] Xen/gntdev: correct error checking in gntdev_map_grant_pages()

[Greg Kroah-Hartman]

From: Jan Beulich <jbeulich@suse.com>

commit ebee0eab08594b2bd5db716288a4f1ae5936e9bc upstream.

Failure of the kernel part of the mapping operation should also be
indicated as an error to the caller, or else it may assume the
respective kernel VA is okay to access.

Furthermore gnttab_map_refs() failing still requires recording
successfully mapped handles, so they can be unmapped subsequently. This
in turn requires there to be a way to tell full hypercall failure from
partial success - preset map_op status fields such that they won't
"happen" to look as if the operation succeeded.

Also again use GNTST_okay instead of implying its value (zero).

This is part of XSA-361.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/xen/gntdev.c      |   17 +++++++++--------
 include/xen/grant_table.h |    1 +
 2 files changed, 10 insertions(+), 8 deletions(-)

--- a/drivers/xen/gntdev.c
+++ b/drivers/xen/gntdev.c
@@ -334,21 +334,22 @@ int gntdev_map_grant_pages(struct gntdev
 	pr_debug("map %d+%d\n", map->index, map->count);
 	err = gnttab_map_refs(map->map_ops, use_ptemod ? map->kmap_ops : NULL,
 			map->pages, map->count);
-	if (err)
-		return err;
 
 	for (i = 0; i < map->count; i++) {
-		if (map->map_ops[i].status) {
+		if (map->map_ops[i].status == GNTST_okay)
+			map->unmap_ops[i].handle = map->map_ops[i].handle;
+		else if (!err)
 			err = -EINVAL;
-			continue;
-		}
 
 		if (map->flags & GNTMAP_device_map)
 			map->unmap_ops[i].dev_bus_addr = map->map_ops[i].dev_bus_addr;
 
-		map->unmap_ops[i].handle = map->map_ops[i].handle;
-		if (use_ptemod)
-			map->kunmap_ops[i].handle = map->kmap_ops[i].handle;
+		if (use_ptemod) {
+			if (map->kmap_ops[i].status == GNTST_okay)
+				map->kunmap_ops[i].handle = map->kmap_ops[i].handle;
+			else if (!err)
+				err = -EINVAL;
+		}
 	}
 	return err;
 }
--- a/include/xen/grant_table.h
+++ b/include/xen/grant_table.h
@@ -157,6 +157,7 @@ gnttab_set_map_op(struct gnttab_map_gran
 	map->flags = flags;
 	map->ref = ref;
 	map->dom = domid;
+	map->status = 1; /* arbitrary positive value */
 }
 
 static inline void

[PATCH 5.11 05/12] xen/arm: dont ignore return errors from set_phys_to_machine

[Greg Kroah-Hartman]

From: Stefano Stabellini <stefano.stabellini@xilinx.com>

commit 36bf1dfb8b266e089afa9b7b984217f17027bf35 upstream.

set_phys_to_machine can fail due to lack of memory, see the kzalloc call
in arch/arm/xen/p2m.c:__set_phys_to_machine_multi.

Don't ignore the potential return error in set_foreign_p2m_mapping,
returning it to the caller instead.

This is part of XSA-361.

Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Cc: stable@vger.kernel.org
Reviewed-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/xen/p2m.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/arch/arm/xen/p2m.c
+++ b/arch/arm/xen/p2m.c
@@ -95,8 +95,10 @@ int set_foreign_p2m_mapping(struct gntta
 	for (i = 0; i < count; i++) {
 		if (map_ops[i].status)
 			continue;
-		set_phys_to_machine(map_ops[i].host_addr >> XEN_PAGE_SHIFT,
-				    map_ops[i].dev_bus_addr >> XEN_PAGE_SHIFT);
+		if (unlikely(!set_phys_to_machine(map_ops[i].host_addr >> XEN_PAGE_SHIFT,
+				    map_ops[i].dev_bus_addr >> XEN_PAGE_SHIFT))) {
+			return -ENOMEM;
+		}
 	}
 
 	return 0;

[PATCH 5.11 06/12] xen-blkback: dont "handle" error by BUG()

[Greg Kroah-Hartman]

From: Jan Beulich <jbeulich@suse.com>

commit 5a264285ed1cd32e26d9de4f3c8c6855e467fd63 upstream.

In particular -ENOMEM may come back here, from set_foreign_p2m_mapping().
Don't make problems worse, the more that handling elsewhere (together
with map's status fields now indicating whether a mapping wasn't even
attempted, and hence has to be considered failed) doesn't require this
odd way of dealing with errors.

This is part of XSA-362.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/block/xen-blkback/blkback.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/drivers/block/xen-blkback/blkback.c
+++ b/drivers/block/xen-blkback/blkback.c
@@ -811,10 +811,8 @@ again:
 			break;
 	}
 
-	if (segs_to_map) {
+	if (segs_to_map)
 		ret = gnttab_map_refs(map, NULL, pages_to_gnt, segs_to_map);
-		BUG_ON(ret);
-	}
 
 	/*
 	 * Now swizzle the MFN in our domain with the MFN from the other domain
@@ -830,7 +828,7 @@ again:
 				gnttab_page_cache_put(&ring->free_pages,
 						      &pages[seg_idx]->page, 1);
 				pages[seg_idx]->handle = BLKBACK_INVALID_HANDLE;
-				ret |= 1;
+				ret |= !ret;
 				goto next;
 			}
 			pages[seg_idx]->handle = map[new_map_idx].handle;

[PATCH 5.11 07/12] xen-netback: dont "handle" error by BUG()

[Greg Kroah-Hartman]

From: Jan Beulich <jbeulich@suse.com>

commit 3194a1746e8aabe86075fd3c5e7cf1f4632d7f16 upstream.

In particular -ENOMEM may come back here, from set_foreign_p2m_mapping().
Don't make problems worse, the more that handling elsewhere (together
with map's status fields now indicating whether a mapping wasn't even
attempted, and hence has to be considered failed) doesn't require this
odd way of dealing with errors.

This is part of XSA-362.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/xen-netback/netback.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -1342,13 +1342,11 @@ int xenvif_tx_action(struct xenvif_queue
 		return 0;
 
 	gnttab_batch_copy(queue->tx_copy_ops, nr_cops);
-	if (nr_mops != 0) {
+	if (nr_mops != 0)
 		ret = gnttab_map_refs(queue->tx_map_ops,
 				      NULL,
 				      queue->pages_to_map,
 				      nr_mops);
-		BUG_ON(ret);
-	}
 
 	work_done = xenvif_tx_submit(queue);
 

[PATCH 5.11 08/12] xen-scsiback: dont "handle" error by BUG()

[Greg Kroah-Hartman]

From: Jan Beulich <jbeulich@suse.com>

commit 7c77474b2d22176d2bfb592ec74e0f2cb71352c9 upstream.

In particular -ENOMEM may come back here, from set_foreign_p2m_mapping().
Don't make problems worse, the more that handling elsewhere (together
with map's status fields now indicating whether a mapping wasn't even
attempted, and hence has to be considered failed) doesn't require this
odd way of dealing with errors.

This is part of XSA-362.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/xen/xen-scsiback.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/xen/xen-scsiback.c
+++ b/drivers/xen/xen-scsiback.c
@@ -386,12 +386,12 @@ static int scsiback_gnttab_data_map_batc
 		return 0;
 
 	err = gnttab_map_refs(map, NULL, pg, cnt);
-	BUG_ON(err);
 	for (i = 0; i < cnt; i++) {
 		if (unlikely(map[i].status != GNTST_okay)) {
 			pr_err("invalid buffer -- could not remap it\n");
 			map[i].handle = SCSIBACK_INVALID_HANDLE;
-			err = -ENOMEM;
+			if (!err)
+				err = -ENOMEM;
 		} else {
 			get_page(pg[i]);
 		}

[PATCH 5.11 09/12] xen-blkback: fix error handling in xen_blkbk_map()

[Greg Kroah-Hartman]

From: Jan Beulich <jbeulich@suse.com>

commit 871997bc9e423f05c7da7c9178e62dde5df2a7f8 upstream.

The function uses a goto-based loop, which may lead to an earlier error
getting discarded by a later iteration. Exit this ad-hoc loop when an
error was encountered.

The out-of-memory error path additionally fails to fill a structure
field looked at by xen_blkbk_unmap_prepare() before inspecting the
handle which does get properly set (to BLKBACK_INVALID_HANDLE).

Since the earlier exiting from the ad-hoc loop requires the same field
filling (invalidation) as that on the out-of-memory path, fold both
paths. While doing so, drop the pr_alert(), as extra log messages aren't
going to help the situation (the kernel will log oom conditions already
anyway).

This is XSA-365.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/block/xen-blkback/blkback.c |   26 ++++++++++++++++----------
 1 file changed, 16 insertions(+), 10 deletions(-)

--- a/drivers/block/xen-blkback/blkback.c
+++ b/drivers/block/xen-blkback/blkback.c
@@ -794,8 +794,13 @@ again:
 			pages[i]->persistent_gnt = persistent_gnt;
 		} else {
 			if (gnttab_page_cache_get(&ring->free_pages,
-						  &pages[i]->page))
-				goto out_of_memory;
+						  &pages[i]->page)) {
+				gnttab_page_cache_put(&ring->free_pages,
+						      pages_to_gnt,
+						      segs_to_map);
+				ret = -ENOMEM;
+				goto out;
+			}
 			addr = vaddr(pages[i]->page);
 			pages_to_gnt[segs_to_map] = pages[i]->page;
 			pages[i]->persistent_gnt = NULL;
@@ -880,17 +885,18 @@ next:
 	}
 	segs_to_map = 0;
 	last_map = map_until;
-	if (map_until != num)
+	if (!ret && map_until != num)
 		goto again;
 
-	return ret;
-
-out_of_memory:
-	pr_alert("%s: out of memory\n", __func__);
-	gnttab_page_cache_put(&ring->free_pages, pages_to_gnt, segs_to_map);
-	for (i = last_map; i < num; i++)
+out:
+	for (i = last_map; i < num; i++) {
+		/* Don't zap current batch's valid persistent grants. */
+		if(i >= last_map + segs_to_map)
+			pages[i]->persistent_gnt = NULL;
 		pages[i]->handle = BLKBACK_INVALID_HANDLE;
-	return -ENOMEM;
+	}
+
+	return ret;
 }
 
 static int xen_blkbk_map_seg(struct pending_req *pending_req)

[PATCH 5.11 10/12] tty: protect tty_write from odd low-level tty disciplines

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 3342ff2698e9720f4040cc458a2744b2b32f5c3a upstream.

Al root-caused a new warning from syzbot to the ttyprintk tty driver
returning a write count larger than the data the tty layer actually gave
it.  Which confused the tty write code mightily, and with the new
iov_iter based code, caused a WARNING in iov_iter_revert().

syzbot correctly bisected the source of the new warning to commit
9bb48c82aced ("tty: implement write_iter"), but the oddity goes back
much further, it just didn't get caught by anything before.

Reported-by: syzbot+3d2c27c2b7dc2a94814d@syzkaller.appspotmail.com
Fixes: 9bb48c82aced ("tty: implement write_iter")
Debugged-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/tty_io.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -962,11 +962,14 @@ static inline ssize_t do_tty_write(
 		if (ret <= 0)
 			break;
 
+		written += ret;
+		if (ret > size)
+			break;
+
 		/* FIXME! Have Al check this! */
 		if (ret != size)
 			iov_iter_revert(from, size-ret);
 
-		written += ret;
 		count -= ret;
 		if (!count)
 			break;

[PATCH 5.11 11/12] Bluetooth: btusb: Always fallback to alt 1 for WBS

[Greg Kroah-Hartman]

From: Trent Piepho <tpiepho@gmail.com>

commit 517b693351a2d04f3af1fc0e506ac7e1346094de upstream.

When alt mode 6 is not available, fallback to the kernel <= 5.7 behavior
of always using alt mode 1.

Prior to kernel 5.8, btusb would always use alt mode 1 for WBS (Wide
Band Speech aka mSBC aka transparent SCO).  In commit baac6276c0a9
("Bluetooth: btusb: handle mSBC audio over USB Endpoints") this
was changed to use alt mode 6, which is the recommended mode in the
Bluetooth spec (Specifications of the Bluetooth System, v5.0, Vol 4.B
§2.2.1).  However, many if not most BT USB adapters do not support alt
mode 6.  In fact, I have been unable to find any which do.

In kernel 5.8, this was changed to use alt mode 6, and if not available,
use alt mode 0.  But mode 0 has a zero byte max packet length and can
not possibly work.  It is just there as a zero-bandwidth dummy mode to
work around a USB flaw that would prevent device enumeration if
insufficient bandwidth were available for the lowest isoc mode
supported.

In effect, WBS was broken for all USB-BT adapters that do not support
alt 6, which appears to nearly all of them.

Then in commit 461f95f04f19 ("Bluetooth: btusb: USB alternate setting 1 for
WBS") the 5.7 behavior was restored, but only for Realtek adapters.

I've tested a Broadcom BRCM20702A and CSR 8510 adapter, both work with
the 5.7 behavior and do not with the 5.8.

So get rid of the Realtek specific flag and use the 5.7 behavior for all
adapters as a fallback when alt 6 is not available.  This was the
kernel's behavior prior to 5.8 and I can find no adapters for which it
is not correct.  And even if there is an adapter for which this does not
work, the current behavior would be to fall back to alt 0, which can not
possibly work either, and so is no better.

Signed-off-by: Trent Piepho <tpiepho@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Cc: Sjoerd Simons <sjoerd@luon.net>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/bluetooth/btusb.c |   20 ++++++--------------
 1 file changed, 6 insertions(+), 14 deletions(-)

--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -506,7 +506,6 @@ static const struct dmi_system_id btusb_
 #define BTUSB_HW_RESET_ACTIVE	12
 #define BTUSB_TX_WAIT_VND_EVT	13
 #define BTUSB_WAKEUP_DISABLE	14
-#define BTUSB_USE_ALT1_FOR_WBS	15
 
 struct btusb_data {
 	struct hci_dev       *hdev;
@@ -1736,15 +1735,12 @@ static void btusb_work(struct work_struc
 				new_alts = data->sco_num;
 			}
 		} else if (data->air_mode == HCI_NOTIFY_ENABLE_SCO_TRANSP) {
-			/* Check if Alt 6 is supported for Transparent audio */
-			if (btusb_find_altsetting(data, 6)) {
-				data->usb_alt6_packet_flow = true;
-				new_alts = 6;
-			} else if (test_bit(BTUSB_USE_ALT1_FOR_WBS, &data->flags)) {
-				new_alts = 1;
-			} else {
-				bt_dev_err(hdev, "Device does not support ALT setting 6");
-			}
+			/* Bluetooth USB spec recommends alt 6 (63 bytes), but
+			 * many adapters do not support it.  Alt 1 appears to
+			 * work for all adapters that do not have alt 6, and
+			 * which work with WBS at all.
+			 */
+			new_alts = btusb_find_altsetting(data, 6) ? 6 : 1;
 		}
 
 		if (btusb_switch_alt_setting(hdev, new_alts) < 0)
@@ -4548,10 +4544,6 @@ static int btusb_probe(struct usb_interf
 		 * (DEVICE_REMOTE_WAKEUP)
 		 */
 		set_bit(BTUSB_WAKEUP_DISABLE, &data->flags);
-		if (btusb_find_altsetting(data, 1))
-			set_bit(BTUSB_USE_ALT1_FOR_WBS, &data->flags);
-		else
-			bt_dev_err(hdev, "Device does not support ALT setting 1");
 	}
 
 	if (!reset)

[PATCH 5.11 12/12] media: pwc: Use correct device for DMA

[Greg Kroah-Hartman]

From: Matwey V. Kornilov <matwey@sai.msu.ru>

commit 69c9e825e812ec6d663e64ebf14bd3bc7f37e2c7 upstream.

This fixes the following newly introduced warning:

[   15.518253] ------------[ cut here ]------------
[   15.518941] WARNING: CPU: 0 PID: 246 at kernel/dma/mapping.c:149 dma_map_page_attrs+0x1a8/0x1d0
[   15.520634] Modules linked in: pwc videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc efivarfs
[   15.522335] CPU: 0 PID: 246 Comm: v4l2-test Not tainted 5.11.0-rc1+ #1
[   15.523281] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
[   15.524438] RIP: 0010:dma_map_page_attrs+0x1a8/0x1d0
[   15.525135] Code: 10 5b 5d 41 5c 41 5d c3 4d 89 d0 eb d7 4d 89 c8 89 e9 48 89 da e8 68 29 00 00 eb d1 48 89 f2 48 2b 50 18 48 89 d0 eb 83 0f 0b <0f> 0b 48 c7 c0 ff ff ff ff eb b8 48 89 d9 48 8b 40 40 e8 61 69 d2
[   15.527938] RSP: 0018:ffffa2694047bca8 EFLAGS: 00010246
[   15.528716] RAX: 0000000000000000 RBX: 0000000000002580 RCX: 0000000000000000
[   15.529782] RDX: 0000000000000000 RSI: ffffcdce000ecc00 RDI: ffffa0b4bdb888a0
[   15.530849] RBP: 0000000000000002 R08: 0000000000000002 R09: 0000000000000000
[   15.531881] R10: 0000000000000004 R11: 000000000002d8c0 R12: 0000000000000000
[   15.532911] R13: ffffa0b4bdb88800 R14: ffffa0b483820000 R15: ffffa0b4bdb888a0
[   15.533942] FS:  00007fc5fbb5e4c0(0000) GS:ffffa0b4fc000000(0000) knlGS:0000000000000000
[   15.535141] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   15.535988] CR2: 00007fc5fb6ea138 CR3: 0000000003812000 CR4: 00000000001506f0
[   15.537025] Call Trace:
[   15.537425]  start_streaming+0x2e9/0x4b0 [pwc]
[   15.538143]  vb2_start_streaming+0x5e/0x110 [videobuf2_common]
[   15.538989]  vb2_core_streamon+0x107/0x140 [videobuf2_common]
[   15.539831]  __video_do_ioctl+0x18f/0x4a0 [videodev]
[   15.540670]  video_usercopy+0x13a/0x5b0 [videodev]
[   15.541349]  ? video_put_user+0x230/0x230 [videodev]
[   15.542096]  ? selinux_file_ioctl+0x143/0x200
[   15.542752]  v4l2_ioctl+0x40/0x50 [videodev]
[   15.543360]  __x64_sys_ioctl+0x89/0xc0
[   15.543930]  do_syscall_64+0x33/0x40
[   15.544448]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   15.545236] RIP: 0033:0x7fc5fb671587
[   15.545780] Code: b3 66 90 48 8b 05 11 49 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e1 48 2c 00 f7 d8 64 89 01 48
[   15.548486] RSP: 002b:00007fff0f71f038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[   15.549578] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc5fb671587
[   15.550664] RDX: 00007fff0f71f060 RSI: 0000000040045612 RDI: 0000000000000003
[   15.551706] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[   15.552738] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff0f71f060
[   15.553817] R13: 00007fff0f71f1d0 R14: 0000000000de1270 R15: 0000000000000000
[   15.554914] ---[ end trace 7be03122966c2486 ]---

Fixes: 1161db6776bd ("media: usb: pwc: Don't use coherent DMA buffers for ISO transfer")
Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/pwc/pwc-if.c |   22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

--- a/drivers/media/usb/pwc/pwc-if.c
+++ b/drivers/media/usb/pwc/pwc-if.c
@@ -155,16 +155,17 @@ static const struct video_device pwc_tem
 /***************************************************************************/
 /* Private functions */
 
-static void *pwc_alloc_urb_buffer(struct device *dev,
+static void *pwc_alloc_urb_buffer(struct usb_device *dev,
 				  size_t size, dma_addr_t *dma_handle)
 {
+	struct device *dmadev = dev->bus->sysdev;
 	void *buffer = kmalloc(size, GFP_KERNEL);
 
 	if (!buffer)
 		return NULL;
 
-	*dma_handle = dma_map_single(dev, buffer, size, DMA_FROM_DEVICE);
-	if (dma_mapping_error(dev, *dma_handle)) {
+	*dma_handle = dma_map_single(dmadev, buffer, size, DMA_FROM_DEVICE);
+	if (dma_mapping_error(dmadev, *dma_handle)) {
 		kfree(buffer);
 		return NULL;
 	}
@@ -172,12 +173,14 @@ static void *pwc_alloc_urb_buffer(struct
 	return buffer;
 }
 
-static void pwc_free_urb_buffer(struct device *dev,
+static void pwc_free_urb_buffer(struct usb_device *dev,
 				size_t size,
 				void *buffer,
 				dma_addr_t dma_handle)
 {
-	dma_unmap_single(dev, dma_handle, size, DMA_FROM_DEVICE);
+	struct device *dmadev = dev->bus->sysdev;
+
+	dma_unmap_single(dmadev, dma_handle, size, DMA_FROM_DEVICE);
 	kfree(buffer);
 }
 
@@ -282,6 +285,7 @@ static void pwc_frame_complete(struct pw
 static void pwc_isoc_handler(struct urb *urb)
 {
 	struct pwc_device *pdev = (struct pwc_device *)urb->context;
+	struct device *dmadev = urb->dev->bus->sysdev;
 	int i, fst, flen;
 	unsigned char *iso_buf = NULL;
 
@@ -328,7 +332,7 @@ static void pwc_isoc_handler(struct urb
 	/* Reset ISOC error counter. We did get here, after all. */
 	pdev->visoc_errors = 0;
 
-	dma_sync_single_for_cpu(&urb->dev->dev,
+	dma_sync_single_for_cpu(dmadev,
 				urb->transfer_dma,
 				urb->transfer_buffer_length,
 				DMA_FROM_DEVICE);
@@ -379,7 +383,7 @@ static void pwc_isoc_handler(struct urb
 		pdev->vlast_packet_size = flen;
 	}
 
-	dma_sync_single_for_device(&urb->dev->dev,
+	dma_sync_single_for_device(dmadev,
 				   urb->transfer_dma,
 				   urb->transfer_buffer_length,
 				   DMA_FROM_DEVICE);
@@ -461,7 +465,7 @@ retry:
 		urb->pipe = usb_rcvisocpipe(udev, pdev->vendpoint);
 		urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
 		urb->transfer_buffer_length = ISO_BUFFER_SIZE;
-		urb->transfer_buffer = pwc_alloc_urb_buffer(&udev->dev,
+		urb->transfer_buffer = pwc_alloc_urb_buffer(udev,
 							    urb->transfer_buffer_length,
 							    &urb->transfer_dma);
 		if (urb->transfer_buffer == NULL) {
@@ -524,7 +528,7 @@ static void pwc_iso_free(struct pwc_devi
 		if (urb) {
 			PWC_DEBUG_MEMORY("Freeing URB\n");
 			if (urb->transfer_buffer)
-				pwc_free_urb_buffer(&urb->dev->dev,
+				pwc_free_urb_buffer(urb->dev,
 						    urb->transfer_buffer_length,
 						    urb->transfer_buffer,
 						    urb->transfer_dma);

Re: [PATCH 5.11 00/12] 5.11.1-rc1 review

[Naresh Kamboju]

On Mon, 22 Feb 2021 at 17:43, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.11.1 release.
> There are 12 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 24 Feb 2021 12:07:46 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.11.1-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.11.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

NOTE:
1) We (LKFT) have upgraded clang-10 to clang-12 builds and following
three new configs enabled.
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_HAVE_KCSAN_COMPILER=y

2) on qemu_x86_64_clang-12 a large number of LTP tests reported failures
on stable-rc 5.4, 5.10, 5.11 and Linux mainline.
reported link,
https://lore.kernel.org/lkml/CA+G9fYuE4ELVDju=LESHnphL4Z2DT5YQjdh9rNgr5D1x5gZxgg@mail.gmail.com/

Summary
------------------------------------------------------------------------

kernel: 5.11.1-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-5.11.y
git commit: 6380656c9227c27a989f750aa7a0c81039d28607
git describe: v5.11-13-g6380656c9227
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.11.y/build/v5.11-13-g6380656c9227

No regressions (compared to build v5.11)

No fixes (compared to build v5.11)

Ran 52054 total tests in the following environments and test suites.

Environments
--------------
- arc
- arm
- arm64
- dragonboard-410c
- dragonboard-845c
- hi6220-hikey
- i386
- juno-64k_page_size
- juno-r2
- juno-r2-compat
- juno-r2-kasan
- mips
- nxp-ls2088
- nxp-ls2088-64k_page_size
- parisc
- powerpc
- qemu-arm-clang
- qemu-arm64-clang
- qemu-arm64-kasan
- qemu-x86_64-clang
- qemu-x86_64-kasan
- qemu-x86_64-kcsan
- qemu_arm
- qemu_arm64
- qemu_arm64-compat
- qemu_i386
- qemu_x86_64
- qemu_x86_64-compat
- riscv
- s390
- sh
- sparc
- x15
- x86
- x86-kasan
- x86_64

Test Suites
-----------
* build
* linux-log-parser
* install-android-platform-tools-r2600
* kselftest-android
* kselftest-bpf
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-lkdtm
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-dio-tests
* ltp-fs-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-securebits-tests
* ltp-tracing-tests
* perf
* kvm-unit-tests
* libhugetlbfs
* ltp-controllers-tests
* ltp-cve-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-ipc-tests
* ltp-sched-tests
* fwts
* kselftest-intel_pstate
* kselftest-livepatch
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-ptrace
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-zram
* ltp-syscalls-tests
* network-basic-tests
* v4l2-compliance
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-vm
* kselftest-x86
* ltp-open-posix-tests
* rcutorture
* kunit

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.11 00/12] 5.11.1-rc1 review

[Greg Kroah-Hartman]

On Tue, Feb 23, 2021 at 01:10:19AM +0530, Naresh Kamboju wrote:
> On Mon, 22 Feb 2021 at 17:43, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> >
> > This is the start of the stable review cycle for the 5.11.1 release.
> > There are 12 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Wed, 24 Feb 2021 12:07:46 +0000.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> >         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.11.1-rc1.gz
> > or in the git tree and branch at:
> >         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.11.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> >
> 
> Results from Linaro’s test farm.
> No regressions on arm64, arm, x86_64, and i386.
> 
> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

Thanks for testing them all and letting me know.

greg k-h

Re: [PATCH 5.11 00/12] 5.11.1-rc1 review

[Guenter Roeck]

On Mon, Feb 22, 2021 at 01:12:52PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.11.1 release.
> There are 12 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 24 Feb 2021 12:07:46 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 155 pass: 155 fail: 0
Qemu test results:
	total: 435 pass: 435 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 5.11 00/12] 5.11.1-rc1 review

[Greg Kroah-Hartman]

On Mon, Feb 22, 2021 at 01:29:17PM -0800, Guenter Roeck wrote:
> On Mon, Feb 22, 2021 at 01:12:52PM +0100, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.11.1 release.
> > There are 12 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Wed, 24 Feb 2021 12:07:46 +0000.
> > Anything received after that time might be too late.
> > 
> 
> Build results:
> 	total: 155 pass: 155 fail: 0
> Qemu test results:
> 	total: 435 pass: 435 fail: 0
> 
> Tested-by: Guenter Roeck <linux@roeck-us.net>

Thanks for testing them all and letting me know.

greg k-h

Re: [PATCH 5.11 00/12] 5.11.1-rc1 review

[Shuah Khan]

On 2/22/21 5:12 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.11.1 release.
> There are 12 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 24 Feb 2021 12:07:46 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.11.1-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.11.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

I made some progress on the drm/amdgpu display and kepboard
problem.

My system has
  amdgpu: ATOM BIOS: 113-RENOIR-026

I narrowed it down to the following as a possible lead to
start looking:
amdgpu 0000:0b:00.0: [drm] Cannot find any crtc or sizes

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 5.11 00/12] 5.11.1-rc1 review

[Shuah Khan]

On 2/23/21 2:05 PM, Shuah Khan wrote:
> On 2/22/21 5:12 AM, Greg Kroah-Hartman wrote:
>> This is the start of the stable review cycle for the 5.11.1 release.
>> There are 12 patches in this series, all will be posted as a response
>> to this one.  If anyone has any issues with these being applied, please
>> let me know.
>>
>> Responses should be made by Wed, 24 Feb 2021 12:07:46 +0000.
>> Anything received after that time might be too late.
>>
>> The whole patch series can be found in one patch at:
>>     https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.11.1-rc1.gz 
>>
>> or in the git tree and branch at:
>>     git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git 
>> linux-5.11.y
>> and the diffstat can be found below.
>>
>> thanks,
>>
>> greg k-h
>>
> 
> Compiled and booted on my test system. No dmesg regressions.
> 
> I made some progress on the drm/amdgpu display and kepboard
> problem.
> 
> My system has
>   amdgpu: ATOM BIOS: 113-RENOIR-026
> 
> I narrowed it down to the following as a possible lead to
> start looking:
> amdgpu 0000:0b:00.0: [drm] Cannot find any crtc or sizes
> 

It is resolved now. A hot-unplugged/plugged the HDMI cable which
triggered reset sequence. There might be link to  AMD_DC_HDCP
support, amdgpu_dm_atomic_commit changes that went into 5.10 and
this behavior.

I am basing this on not seeing the problem on Linux 5.4 and until
Linux 5.10. In any case, I wish I know more, but life is back to
normal now.

When I hot-unplugged/plugged the cable, saw the following dmesg:

amdgpu 0000:0b:00.0: [drm] fb0: amdgpudrmfb frame buffer device
kernel: [ 6704.580326] [drm:drm_atomic_helper_wait_for_flip_done 
[drm_kms_helper]] *ERROR* [CRTC:67:crtc-0] flip_done timed out
kernel: [ 6773.444316] [drm:drm_atomic_helper_wait_for_dependencies 
[drm_kms_helper]] *ERROR* [CRTC:67:crtc-0] flip_done timed out
kernel: [ 6783.684306] [drm:drm_atomic_helper_wait_for_dependencies 
[drm_kms_helper]] *ERROR* [PLANE:55:plane-3] flip_done timed out

The following

WARN_ON(acrtc_attach->pflip_status != AMDGPU_FLIP_NONE); fires:


kernel: [ 6783.750035] WARNING: CPU: 7 PID: 190 at 
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:7754 
amdgpu_dm_atomic_commit_tail+0x2542/0x25d0 [amdgpu]
Feb 23 16:20:39 shuah-IC5 kernel: [ 6783.750392] Modules linked in: 
btrfs blake2b_generic xor raid6_pq ufs qnx4 hfsplus hfs minix ntfs msdos 
jfs xfs libcrc32c rfcomm ccm cmac algif_hash algif_skcipher af_alg bnep 
intel_rapl_msr intel_rapl_common amdgpu edac_mce_amd 
snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio nls_iso8859_1 
snd_hda_codec_hdmi snd_hda_intel kvm_amd snd_intel_dspcfg snd_hda_codec 
kvm snd_hda_core ath10k_pci snd_hwdep snd_pcm crct10dif_pclmul 
ath10k_core ghash_clmulni_intel ath iommu_v2 snd_seq_midi gpu_sched 
aesni_intel snd_seq_midi_event drm_ttm_helper mac80211 ttm snd_rawmidi 
btusb drm_kms_helper crypto_simd btrtl snd_seq cryptd btbcm rtsx_usb_ms 
cec glue_helper btintel snd_seq_device snd_timer rapl memstick rc_core 
bluetooth cfg80211 i2c_algo_bit snd fb_sys_fops syscopyarea sysfillrect 
snd_rn_pci_acp3x ecdh_generic wmi_bmof sysimgblt efi_pstore soundcore 
ccp joydev ecc k10temp input_leds snd_pci_acp3x libarc4 mac_hid 
sch_fq_codel parport_pc ppdev lp parport drm ip_tables x_tables autofs4
Feb 23 16:20:39 shuah-IC5 kernel: [ 6783.750506]  hid_generic usbhid 
rtsx_usb_sdmmc hid rtsx_usb nvme crc32_pclmul i2c_piix4 r8169 nvme_core 
ahci xhci_pci realtek libahci xhci_pci_renesas wmi video gpio_amdpt 
gpio_generic

kernel: [ 6783.750532] CPU: 7 PID: 190 Comm: kworker/7:1 Not tainted 
5.11.1 #1
kernel: [ 6783.750537] Hardware name: LENOVO 90Q30008US/3728, BIOS 
O4ZKT1CA 09/16/2020
kernel: [ 6783.750541] Workqueue: events dm_irq_work_func [amdgpu]
kernel: [ 6783.750859] RIP: 
0010:amdgpu_dm_atomic_commit_tail+0x2542/0x25d0 [amdgpu]
kernel: [ 6783.751159] Code: a0 fd ff ff 01 c7 85 9c fd ff ff 37 00 00 
00 c7 85 a4 fd ff ff 20 00 00 00 e8 ca ef 12 00 e9 e9 fa ff ff 0f 0b e9 
39 f9 ff ff <0f> 0b e9 88 f9 ff ff 0f 0b 0f 0b e9 9e f9 ff ff 49 8b 06 
41 0f b6
kernel: [ 6783.751162] RSP: 0018:ffffac390068fa48 EFLAGS: 00010002
kernel: [ 6783.751167] RAX: 0000000000000002 RBX: 0000000000000004 RCX: 
ffff9604442d7918
kernel: [ 6783.751169] RDX: 0000000000000001 RSI: 0000000000000297 RDI: 
ffff960444a80188
kernel: [ 6783.751172] RBP: ffffac390068fd48 R08: 0000000000000005 R09: 
0000000000000000
kernel: [ 6783.751174] R10: ffffac390068f998 R11: ffffac390068f99c R12: 
0000000000000297
kernel: [ 6783.751176] R13: ffff96048d131a00 R14: ffff9604442d7800 R15: 
ffff96048da29c00
kernel: [ 6783.751179] FS:  0000000000000000(0000) 
GS:ffff96073f1c0000(0000) knlGS:0000000000000000
kernel: [ 6783.751182] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: [ 6783.751185] CR2: 00005612d2a1a000 CR3: 0000000030010000 CR4: 
0000000000350ee0
kernel: [ 6783.751188] Call Trace:
kernel: [ 6783.751197]  ? irq_work_queue+0x2a/0x40
kernel: [ 6783.751205]  ? vprintk_emit+0x139/0x240
kernel: [ 6783.751218]  commit_tail+0x99/0x130 [drm_kms_helper]
kernel: [ 6783.751247]  drm_atomic_helper_commit+0x123/0x150 
[drm_kms_helper]
kernel: [ 6783.751273]  drm_atomic_commit+0x4a/0x50 [drm]
kernel: [ 6783.751323]  dm_restore_drm_connector_state+0xf3/0x170 [amdgpu]
kernel: [ 6783.751628]  handle_hpd_irq+0x11a/0x150 [amdgpu]
kernel: [ 6783.751923]  dm_irq_work_func+0x4e/0x60 [amdgpu]
kernel: [ 6783.752018]  process_one_work+0x220/0x3c0
kernel: [ 6783.752018]  worker_thread+0x53/0x420
kernel: [ 6783.752018]  kthread+0x12f/0x150
kernel: [ 6783.752018]  ? process_one_work+0x3c0/0x3c0
kernel: [ 6783.752018]  ? __kthread_bind_mask+0x70/0x70
kernel: [ 6783.752018]  ret_from_fork+0x22/0x30

thanks,
-- Shuah

Re: [PATCH 5.11 00/12] 5.11.1-rc1 review

[Greg Kroah-Hartman]

On Tue, Feb 23, 2021 at 05:12:56PM -0700, Shuah Khan wrote:
> On 2/23/21 2:05 PM, Shuah Khan wrote:
> > On 2/22/21 5:12 AM, Greg Kroah-Hartman wrote:
> > > This is the start of the stable review cycle for the 5.11.1 release.
> > > There are 12 patches in this series, all will be posted as a response
> > > to this one.  If anyone has any issues with these being applied, please
> > > let me know.
> > > 
> > > Responses should be made by Wed, 24 Feb 2021 12:07:46 +0000.
> > > Anything received after that time might be too late.
> > > 
> > > The whole patch series can be found in one patch at:
> > >     https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.11.1-rc1.gz
> > > 
> > > or in the git tree and branch at:
> > >     git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> > > linux-5.11.y
> > > and the diffstat can be found below.
> > > 
> > > thanks,
> > > 
> > > greg k-h
> > > 
> > 
> > Compiled and booted on my test system. No dmesg regressions.
> > 
> > I made some progress on the drm/amdgpu display and kepboard
> > problem.
> > 
> > My system has
> >   amdgpu: ATOM BIOS: 113-RENOIR-026
> > 
> > I narrowed it down to the following as a possible lead to
> > start looking:
> > amdgpu 0000:0b:00.0: [drm] Cannot find any crtc or sizes
> > 
> 
> It is resolved now. A hot-unplugged/plugged the HDMI cable which
> triggered reset sequence. There might be link to  AMD_DC_HDCP
> support, amdgpu_dm_atomic_commit changes that went into 5.10 and
> this behavior.
> 
> I am basing this on not seeing the problem on Linux 5.4 and until
> Linux 5.10. In any case, I wish I know more, but life is back to
> normal now.

Great, thanks for testing and tracking this down.

greg k-h