* [RFC PATCH] scsi: smartpqi: create module parameters for LUN reset
@ 2021-01-21 17:03 Enzo Matsumiya
2021-02-23 15:54 ` Enzo Matsumiya
0 siblings, 1 reply; 2+ messages in thread
From: Enzo Matsumiya @ 2021-01-21 17:03 UTC (permalink / raw)
To: linux-scsi
Cc: Enzo Matsumiya, Don Brace, James E.J. Bottomley,
Martin K. Petersen, storagedev, linux-kernel
Commit c2922f174fa0 ("scsi: smartpqi: fix LUN reset when fw bkgnd thread is hung")
added support for a timeout on LUN resets.
However, when there are 2 or more devices connected to the same
controller and you hot-remove one of them, I/O will stall on the
devices still online for PQI_LUN_RESET_RETRIES * PQI_LUN_RESET_RETRY_INTERVAL_MSECS
miliseconds.
This commit makes those values configurable via module parameters.
Changing the bail out condition on rc in _pqi_device_reset() might be possible,
but could also break the original purpose of commit c2922f174fa0.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
---
drivers/scsi/smartpqi/smartpqi_init.c | 18 ++++++++++++++----
1 file changed, 14 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index c53f456fbd09..9835b2e5b91a 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -157,6 +157,18 @@ module_param_named(hide_vsep,
MODULE_PARM_DESC(hide_vsep,
"Hide the virtual SEP for direct attached drives.");
+static int pqi_lun_reset_retries = 3;
+module_param_named(lun_reset_retries,
+ pqi_lun_reset_retries, int, 0644);
+MODULE_PARM_DESC(lun_reset_retries,
+ "Number of retries when resetting a LUN");
+
+static int pqi_lun_reset_tmo_interval = 10000;
+module_param_named(lun_reset_tmo_interval,
+ pqi_lun_reset_tmo_interval, int, 0644);
+MODULE_PARM_DESC(lun_reset_tmo_interval,
+ "LUN reset timeout interval (in miliseconds)");
+
static char *raid_levels[] = {
"RAID-0",
"RAID-4",
@@ -5687,8 +5699,6 @@ static int pqi_lun_reset(struct pqi_ctrl_info *ctrl_info,
/* Performs a reset at the LUN level. */
-#define PQI_LUN_RESET_RETRIES 3
-#define PQI_LUN_RESET_RETRY_INTERVAL_MSECS 10000
#define PQI_LUN_RESET_PENDING_IO_TIMEOUT_SECS 120
static int _pqi_device_reset(struct pqi_ctrl_info *ctrl_info,
@@ -5700,9 +5710,9 @@ static int _pqi_device_reset(struct pqi_ctrl_info *ctrl_info,
for (retries = 0;;) {
rc = pqi_lun_reset(ctrl_info, device);
- if (rc == 0 || ++retries > PQI_LUN_RESET_RETRIES)
+ if (rc == 0 || ++retries > pqi_lun_reset_retries)
break;
- msleep(PQI_LUN_RESET_RETRY_INTERVAL_MSECS);
+ msleep(pqi_lun_reset_tmo_interval);
}
timeout_secs = rc ? PQI_LUN_RESET_PENDING_IO_TIMEOUT_SECS : NO_TIMEOUT;
--
2.30.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [RFC PATCH] scsi: smartpqi: create module parameters for LUN reset
2021-01-21 17:03 [RFC PATCH] scsi: smartpqi: create module parameters for LUN reset Enzo Matsumiya
@ 2021-02-23 15:54 ` Enzo Matsumiya
0 siblings, 0 replies; 2+ messages in thread
From: Enzo Matsumiya @ 2021-02-23 15:54 UTC (permalink / raw)
To: linux-scsi
Cc: Don Brace, James E.J. Bottomley, Martin K. Petersen, storagedev,
linux-kernel
Hi,
On 01/21, Enzo Matsumiya wrote:
>Commit c2922f174fa0 ("scsi: smartpqi: fix LUN reset when fw bkgnd thread is hung")
>added support for a timeout on LUN resets.
>
>However, when there are 2 or more devices connected to the same
>controller and you hot-remove one of them, I/O will stall on the
>devices still online for PQI_LUN_RESET_RETRIES * PQI_LUN_RESET_RETRY_INTERVAL_MSECS
>miliseconds.
>
>This commit makes those values configurable via module parameters.
>
>Changing the bail out condition on rc in _pqi_device_reset() might be possible,
>but could also break the original purpose of commit c2922f174fa0.
>
>Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
>---
> drivers/scsi/smartpqi/smartpqi_init.c | 18 ++++++++++++++----
> 1 file changed, 14 insertions(+), 4 deletions(-)
>
>diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
>index c53f456fbd09..9835b2e5b91a 100644
>--- a/drivers/scsi/smartpqi/smartpqi_init.c
>+++ b/drivers/scsi/smartpqi/smartpqi_init.c
>@@ -157,6 +157,18 @@ module_param_named(hide_vsep,
> MODULE_PARM_DESC(hide_vsep,
> "Hide the virtual SEP for direct attached drives.");
>
>+static int pqi_lun_reset_retries = 3;
>+module_param_named(lun_reset_retries,
>+ pqi_lun_reset_retries, int, 0644);
>+MODULE_PARM_DESC(lun_reset_retries,
>+ "Number of retries when resetting a LUN");
>+
>+static int pqi_lun_reset_tmo_interval = 10000;
>+module_param_named(lun_reset_tmo_interval,
>+ pqi_lun_reset_tmo_interval, int, 0644);
>+MODULE_PARM_DESC(lun_reset_tmo_interval,
>+ "LUN reset timeout interval (in miliseconds)");
>+
> static char *raid_levels[] = {
> "RAID-0",
> "RAID-4",
>@@ -5687,8 +5699,6 @@ static int pqi_lun_reset(struct pqi_ctrl_info *ctrl_info,
>
> /* Performs a reset at the LUN level. */
>
>-#define PQI_LUN_RESET_RETRIES 3
>-#define PQI_LUN_RESET_RETRY_INTERVAL_MSECS 10000
> #define PQI_LUN_RESET_PENDING_IO_TIMEOUT_SECS 120
>
> static int _pqi_device_reset(struct pqi_ctrl_info *ctrl_info,
>@@ -5700,9 +5710,9 @@ static int _pqi_device_reset(struct pqi_ctrl_info *ctrl_info,
>
> for (retries = 0;;) {
> rc = pqi_lun_reset(ctrl_info, device);
>- if (rc == 0 || ++retries > PQI_LUN_RESET_RETRIES)
>+ if (rc == 0 || ++retries > pqi_lun_reset_retries)
> break;
>- msleep(PQI_LUN_RESET_RETRY_INTERVAL_MSECS);
>+ msleep(pqi_lun_reset_tmo_interval);
> }
>
> timeout_secs = rc ? PQI_LUN_RESET_PENDING_IO_TIMEOUT_SECS : NO_TIMEOUT;
>--
>2.30.0
>
Can anyone give me some feedback on this please?
Cheers,
Enzo
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-02-23 15:55 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-21 17:03 [RFC PATCH] scsi: smartpqi: create module parameters for LUN reset Enzo Matsumiya
2021-02-23 15:54 ` Enzo Matsumiya
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).