linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Thara Gopinath <thara.gopinath@linaro.org>
To: herbert@gondor.apana.org.au, davem@davemloft.net,
	bjorn.andersson@linaro.org
Cc: ebiggers@google.com, ardb@kernel.org, sivaprak@codeaurora.org,
	linux-crypto@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 6/7] crypto: qce: common: Add support for AEAD algorithms
Date: Thu, 25 Feb 2021 13:27:15 -0500	[thread overview]
Message-ID: <20210225182716.1402449-7-thara.gopinath@linaro.org> (raw)
In-Reply-To: <20210225182716.1402449-1-thara.gopinath@linaro.org>

Add register programming sequence for enabling AEAD
algorithms on the Qualcomm crypto engine.

Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
---
 drivers/crypto/qce/common.c | 155 +++++++++++++++++++++++++++++++++++-
 1 file changed, 153 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/qce/common.c b/drivers/crypto/qce/common.c
index 05a71c5ecf61..54d209cb0525 100644
--- a/drivers/crypto/qce/common.c
+++ b/drivers/crypto/qce/common.c
@@ -15,6 +15,16 @@
 #include "core.h"
 #include "regs-v5.h"
 #include "sha.h"
+#include "aead.h"
+
+static const u32 std_iv_sha1[SHA256_DIGEST_SIZE / sizeof(u32)] = {
+	SHA1_H0, SHA1_H1, SHA1_H2, SHA1_H3, SHA1_H4, 0, 0, 0
+};
+
+static const u32 std_iv_sha256[SHA256_DIGEST_SIZE / sizeof(u32)] = {
+	SHA256_H0, SHA256_H1, SHA256_H2, SHA256_H3,
+	SHA256_H4, SHA256_H5, SHA256_H6, SHA256_H7
+};
 
 static inline u32 qce_read(struct qce_device *qce, u32 offset)
 {
@@ -96,7 +106,7 @@ static inline void qce_crypto_go(struct qce_device *qce, bool result_dump)
 		qce_write(qce, REG_GOPROC, BIT(GO_SHIFT));
 }
 
-#ifdef CONFIG_CRYPTO_DEV_QCE_SHA
+#if defined(CONFIG_CRYPTO_DEV_QCE_SHA) || defined(CONFIG_CRYPTO_DEV_QCE_AEAD)
 static u32 qce_auth_cfg(unsigned long flags, u32 key_size, u32 auth_size)
 {
 	u32 cfg = 0;
@@ -139,7 +149,9 @@ static u32 qce_auth_cfg(unsigned long flags, u32 key_size, u32 auth_size)
 
 	return cfg;
 }
+#endif
 
+#ifdef CONFIG_CRYPTO_DEV_QCE_SHA
 static int qce_setup_regs_ahash(struct crypto_async_request *async_req)
 {
 	struct ahash_request *req = ahash_request_cast(async_req);
@@ -225,7 +237,7 @@ static int qce_setup_regs_ahash(struct crypto_async_request *async_req)
 }
 #endif
 
-#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER
+#if defined(CONFIG_CRYPTO_DEV_QCE_SKCIPHER) || defined(CONFIG_CRYPTO_DEV_QCE_AEAD)
 static u32 qce_encr_cfg(unsigned long flags, u32 aes_key_size)
 {
 	u32 cfg = 0;
@@ -271,7 +283,9 @@ static u32 qce_encr_cfg(unsigned long flags, u32 aes_key_size)
 
 	return cfg;
 }
+#endif
 
+#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER
 static void qce_xts_swapiv(__be32 *dst, const u8 *src, unsigned int ivsize)
 {
 	u8 swap[QCE_AES_IV_LENGTH];
@@ -386,6 +400,139 @@ static int qce_setup_regs_skcipher(struct crypto_async_request *async_req)
 }
 #endif
 
+#ifdef CONFIG_CRYPTO_DEV_QCE_AEAD
+static int qce_setup_regs_aead(struct crypto_async_request *async_req)
+{
+	struct aead_request *req = aead_request_cast(async_req);
+	struct qce_aead_reqctx *rctx = aead_request_ctx(req);
+	struct qce_aead_ctx *ctx = crypto_tfm_ctx(async_req->tfm);
+	struct qce_alg_template *tmpl = to_aead_tmpl(crypto_aead_reqtfm(req));
+	struct qce_device *qce = tmpl->qce;
+	__be32 enckey[QCE_MAX_CIPHER_KEY_SIZE / sizeof(__be32)] = {0};
+	__be32 enciv[QCE_MAX_IV_SIZE / sizeof(__be32)] = {0};
+	__be32 authkey[QCE_SHA_HMAC_KEY_SIZE / sizeof(__be32)] = {0};
+	__be32 authiv[SHA256_DIGEST_SIZE / sizeof(__be32)] = {0};
+	__be32 authnonce[QCE_MAX_NONCE / sizeof(__be32)] = {0};
+	unsigned int enc_keylen = ctx->enc_keylen;
+	unsigned int auth_keylen = ctx->auth_keylen;
+	unsigned int enc_ivsize = rctx->ivsize;
+	unsigned int auth_ivsize;
+	unsigned int enckey_words, enciv_words;
+	unsigned int authkey_words, authiv_words, authnonce_words;
+	unsigned long flags = rctx->flags;
+	u32 encr_cfg = 0, auth_cfg = 0, config, totallen;
+	u32 *iv_last_word;
+
+	qce_setup_config(qce);
+
+	/* Write encryption key */
+	qce_cpu_to_be32p_array(enckey, ctx->enc_key, enc_keylen);
+	enckey_words = enc_keylen / sizeof(u32);
+	qce_write_array(qce, REG_ENCR_KEY0, (u32 *)enckey, enckey_words);
+
+	/* Write encryption iv */
+	qce_cpu_to_be32p_array(enciv, rctx->iv, enc_ivsize);
+	enciv_words = enc_ivsize / sizeof(u32);
+	qce_write_array(qce, REG_CNTR0_IV0, (u32 *)enciv, enciv_words);
+
+	if (IS_CCM(rctx->flags)) {
+		iv_last_word = (u32 *)&enciv[enciv_words - 1];
+//		qce_write(qce, REG_CNTR3_IV3, enciv[enciv_words - 1] + 1);
+		qce_write(qce, REG_CNTR3_IV3, (*iv_last_word) + 1);
+		qce_write_array(qce, REG_ENCR_CCM_INT_CNTR0, (u32 *)enciv, enciv_words);
+		qce_write(qce, REG_CNTR_MASK, ~0);
+		qce_write(qce, REG_CNTR_MASK0, ~0);
+		qce_write(qce, REG_CNTR_MASK1, ~0);
+		qce_write(qce, REG_CNTR_MASK2, ~0);
+	}
+
+	/* Clear authentication IV and KEY registers of previous values */
+	qce_clear_array(qce, REG_AUTH_IV0, 16);
+	qce_clear_array(qce, REG_AUTH_KEY0, 16);
+
+	/* Clear byte count */
+	qce_clear_array(qce, REG_AUTH_BYTECNT0, 4);
+
+	/* Write authentication key */
+	qce_cpu_to_be32p_array(authkey, ctx->auth_key, auth_keylen);
+	authkey_words = DIV_ROUND_UP(auth_keylen, sizeof(u32));
+	qce_write_array(qce, REG_AUTH_KEY0, (u32 *)authkey, authkey_words);
+
+	if (IS_SHA_HMAC(rctx->flags)) {
+		/* Write default authentication iv */
+		if (IS_SHA1_HMAC(rctx->flags)) {
+			auth_ivsize = SHA1_DIGEST_SIZE;
+			memcpy(authiv, std_iv_sha1, auth_ivsize);
+		} else if (IS_SHA256_HMAC(rctx->flags)) {
+			auth_ivsize = SHA256_DIGEST_SIZE;
+			memcpy(authiv, std_iv_sha256, auth_ivsize);
+		}
+		authiv_words = auth_ivsize / sizeof(u32);
+		qce_write_array(qce, REG_AUTH_IV0, (u32 *)authiv, authiv_words);
+	}
+
+	if (IS_CCM(rctx->flags)) {
+		qce_cpu_to_be32p_array(authnonce, rctx->ccm_nonce, QCE_MAX_NONCE);
+		authnonce_words = QCE_MAX_NONCE / sizeof(u32);
+		qce_write_array(qce, REG_AUTH_INFO_NONCE0, (u32 *)authnonce, authnonce_words);
+	}
+
+	/* Set up ENCR_SEG_CFG */
+	encr_cfg = qce_encr_cfg(flags, enc_keylen);
+	if (IS_ENCRYPT(flags))
+		encr_cfg |= BIT(ENCODE_SHIFT);
+	qce_write(qce, REG_ENCR_SEG_CFG, encr_cfg);
+
+	/* Set up AUTH_SEG_CFG */
+	auth_cfg = qce_auth_cfg(rctx->flags, auth_keylen, ctx->authsize);
+	auth_cfg |= BIT(AUTH_LAST_SHIFT);
+	auth_cfg |= BIT(AUTH_FIRST_SHIFT);
+	if (IS_ENCRYPT(flags)) {
+		if (IS_CCM(rctx->flags))
+			auth_cfg |= AUTH_POS_BEFORE << AUTH_POS_SHIFT;
+		else
+			auth_cfg |= AUTH_POS_AFTER << AUTH_POS_SHIFT;
+	} else {
+		if (IS_CCM(rctx->flags))
+			auth_cfg |= AUTH_POS_AFTER << AUTH_POS_SHIFT;
+		else
+			auth_cfg |= AUTH_POS_BEFORE << AUTH_POS_SHIFT;
+	}
+	qce_write(qce, REG_AUTH_SEG_CFG, auth_cfg);
+
+	totallen = rctx->cryptlen + rctx->assoclen;
+
+	/* Set the encryption size and start offset */
+	if (IS_CCM(rctx->flags) && IS_DECRYPT(rctx->flags))
+		qce_write(qce, REG_ENCR_SEG_SIZE, rctx->cryptlen + ctx->authsize);
+	else
+		qce_write(qce, REG_ENCR_SEG_SIZE, rctx->cryptlen);
+	qce_write(qce, REG_ENCR_SEG_START, rctx->assoclen & 0xffff);
+
+	/* Set the authentication size and start offset */
+	qce_write(qce, REG_AUTH_SEG_SIZE, totallen);
+	qce_write(qce, REG_AUTH_SEG_START, 0);
+
+	/* Write total length */
+	if (IS_CCM(rctx->flags) && IS_DECRYPT(rctx->flags))
+		qce_write(qce, REG_SEG_SIZE, totallen + ctx->authsize);
+	else
+		qce_write(qce, REG_SEG_SIZE, totallen);
+
+	/* get little endianness */
+	config = qce_config_reg(qce, 1);
+	qce_write(qce, REG_CONFIG, config);
+
+	/* Start the process */
+	if (IS_CCM(flags))
+		qce_crypto_go(qce, 0);
+	else
+		qce_crypto_go(qce, 1);
+
+	return 0;
+}
+#endif
+
 int qce_start(struct crypto_async_request *async_req, u32 type)
 {
 	switch (type) {
@@ -396,6 +543,10 @@ int qce_start(struct crypto_async_request *async_req, u32 type)
 #ifdef CONFIG_CRYPTO_DEV_QCE_SHA
 	case CRYPTO_ALG_TYPE_AHASH:
 		return qce_setup_regs_ahash(async_req);
+#endif
+#ifdef CONFIG_CRYPTO_DEV_QCE_AEAD
+	case CRYPTO_ALG_TYPE_AEAD:
+		return qce_setup_regs_aead(async_req);
 #endif
 	default:
 		return -EINVAL;
-- 
2.25.1


  parent reply	other threads:[~2021-02-25 18:31 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-25 18:27 [PATCH 0/7] Add support for AEAD algorithms in Qualcomm Crypto Engine driver Thara Gopinath
2021-02-25 18:27 ` [PATCH 1/7] crypto: qce: common: Add MAC failed error checking Thara Gopinath
2021-04-05 17:36   ` Bjorn Andersson
2021-04-13 19:28     ` Thara Gopinath
2021-02-25 18:27 ` [PATCH 2/7] crypto: qce: common: Make result dump optional Thara Gopinath
2021-04-05 22:23   ` Bjorn Andersson
2021-02-25 18:27 ` [PATCH 3/7] crypto: qce: Add mode for rfc4309 Thara Gopinath
2021-04-05 22:32   ` Bjorn Andersson
2021-04-13 19:30     ` Thara Gopinath
2021-04-13 20:38       ` Bjorn Andersson
2021-02-25 18:27 ` [PATCH 4/7] crypto: qce: Add support for AEAD algorithms Thara Gopinath
2021-03-12 13:01   ` Herbert Xu
2021-03-17  2:09     ` Thara Gopinath
2021-02-25 18:27 ` [PATCH 5/7] crypto: qce: common: Clean up qce_auth_cfg Thara Gopinath
2021-02-25 18:27 ` Thara Gopinath [this message]
2021-04-05 22:18   ` [PATCH 6/7] crypto: qce: common: Add support for AEAD algorithms Bjorn Andersson
2021-04-13 21:31     ` Thara Gopinath
2021-04-13 22:20       ` Bjorn Andersson
2021-04-13 22:44         ` Thara Gopinath
2021-04-13 23:09           ` Bjorn Andersson
2021-04-17 13:31             ` Thara Gopinath
2021-04-13 22:27     ` Thara Gopinath
2021-04-13 22:33       ` Bjorn Andersson
2021-04-13 22:46         ` Thara Gopinath
2021-02-25 18:27 ` [PATCH 7/7] crypto: qce: aead: Schedule fallback algorithm Thara Gopinath
2021-03-04  5:30 ` [PATCH 0/7] Add support for AEAD algorithms in Qualcomm Crypto Engine driver Herbert Xu
2021-03-04 18:41   ` Thara Gopinath
2021-03-12 13:02     ` Herbert Xu
2021-03-17  2:08       ` Thara Gopinath

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210225182716.1402449-7-thara.gopinath@linaro.org \
    --to=thara.gopinath@linaro.org \
    --cc=ardb@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=davem@davemloft.net \
    --cc=ebiggers@google.com \
    --cc=herbert@gondor.apana.org.au \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sivaprak@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).