linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Aswath Govindraju <a-govindraju@ti.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Vignesh Raghavendra <vigneshr@ti.com>,
	Lokesh Vutla <lokeshvutla@ti.com>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Aswath Govindraju <a-govindraju@ti.com>,
	Nishanth Menon <nm@ti.com>, Tero Kristo <kristo@kernel.org>,
	Rob Herring <robh+dt@kernel.org>, Sekhar Nori <nsekhar@ti.com>,
	Faiz Abbas <faiz_abbas@ti.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v2] arm64: dts: ti: k3-j721e-main: Update the speed modes supported and their itap delay values for MMCSD subsystems
Date: Fri, 5 Mar 2021 11:11:04 +0530	[thread overview]
Message-ID: <20210305054104.10153-1-a-govindraju@ti.com> (raw)

According to latest errata of J721e [1], HS400 mode is not supported
in MMCSD0 subsystem (i2024) and SDR104 mode is not supported in MMCSD1/2
subsystems (i2090). Therefore, replace mmc-hs400-1_8v with mmc-hs200-1_8v
in MMCSD0 subsystem and add a sdhci mask to disable SDR104 speed mode.

Also, update the itap delay values for all the MMCSD subsystems according
the latest J721e data sheet[2]

[1] - https://www.ti.com/lit/er/sprz455/sprz455.pdf
[2] - https://www.ti.com/lit/ds/symlink/tda4vm.pdf

Fixes: cd48ce86a4d0 ("arm64: dts: ti: k3-j721e-common-proc-board: Add support for SD card UHS modes")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
---

Changes since v1:
- Corrected the fixes tag to latest commit that makes changes to the
  sdhci DT nodes.

 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 8c84dafb7125..f1e7da3dfa27 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -1042,13 +1042,16 @@
 		assigned-clocks = <&k3_clks 91 1>;
 		assigned-clock-parents = <&k3_clks 91 2>;
 		bus-width = <8>;
-		mmc-hs400-1_8v;
+		mmc-hs200-1_8v;
 		mmc-ddr-1_8v;
 		ti,otap-del-sel-legacy = <0xf>;
 		ti,otap-del-sel-mmc-hs = <0xf>;
 		ti,otap-del-sel-ddr52 = <0x5>;
 		ti,otap-del-sel-hs200 = <0x6>;
 		ti,otap-del-sel-hs400 = <0x0>;
+		ti,itap-del-sel-legacy = <0x10>;
+		ti,itap-del-sel-mmc-hs = <0xa>;
+		ti,itap-del-sel-ddr52 = <0x3>;
 		ti,trm-icp = <0x8>;
 		ti,strobe-sel = <0x77>;
 		dma-coherent;
@@ -1069,9 +1072,15 @@
 		ti,otap-del-sel-sdr25 = <0xf>;
 		ti,otap-del-sel-sdr50 = <0xc>;
 		ti,otap-del-sel-ddr50 = <0xc>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,itap-del-sel-ddr50 = <0x2>;
 		ti,trm-icp = <0x8>;
 		ti,clkbuf-sel = <0x7>;
 		dma-coherent;
+		sdhci-caps-mask = <0x2 0x0>;
 	};
 
 	main_sdhci2: mmc@4f98000 {
@@ -1089,9 +1098,15 @@
 		ti,otap-del-sel-sdr25 = <0xf>;
 		ti,otap-del-sel-sdr50 = <0xc>;
 		ti,otap-del-sel-ddr50 = <0xc>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,itap-del-sel-ddr50 = <0x2>;
 		ti,trm-icp = <0x8>;
 		ti,clkbuf-sel = <0x7>;
 		dma-coherent;
+		sdhci-caps-mask = <0x2 0x0>;
 	};
 
 	usbss0: cdns-usb@4104000 {
-- 
2.17.1


             reply	other threads:[~2021-03-05  5:41 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-05  5:41 Aswath Govindraju [this message]
2021-03-09 16:03 ` [PATCH v2] arm64: dts: ti: k3-j721e-main: Update the speed modes supported and their itap delay values for MMCSD subsystems Kishon Vijay Abraham I
2021-03-11 14:16 ` Nishanth Menon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210305054104.10153-1-a-govindraju@ti.com \
    --to=a-govindraju@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=faiz_abbas@ti.com \
    --cc=kishon@ti.com \
    --cc=kristo@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lokeshvutla@ti.com \
    --cc=nm@ti.com \
    --cc=nsekhar@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).