linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Qing Zhang <zhangqing@loongson.cn>
To: Huacai Chen <chenhuacai@kernel.org>,
	Jiaxun Yang <jiaxun.yang@flygoat.com>,
	Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
	Thomas Gleixner <tglx@linutronix.de>,
	Marc Zyngier <maz@kernel.org>
Cc: linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, Ming Wang <wangming01@loongson.cn>
Subject: [PATCH v4 2/7] MIPS: Loongson64: Distinguish firmware dependencies DTB/LEFI
Date: Wed, 10 Mar 2021 15:56:34 +0800	[thread overview]
Message-ID: <20210310075639.20372-3-zhangqing@loongson.cn> (raw)
In-Reply-To: <20210310075639.20372-1-zhangqing@loongson.cn>

Add DTB boot support, only support Loongson-2K1000 processor
for now, determine whether to use the built-in DTB or the DTB
from the firmware by checking the range of CKSEG0 and XKPHYS.
loongson_fw_interface will be used in the future.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Tested-by: Ming Wang <wangming01@loongson.cn>
---

v3-v4: Standard submission of information
       Fix error handling 

 .../include/asm/mach-loongson64/boot_param.h     |  6 ++++++
 arch/mips/include/asm/mach-loongson64/loongson.h |  3 ++-
 arch/mips/loongson64/env.c                       | 13 ++++++++++++-
 arch/mips/loongson64/init.c                      | 16 ++++++++++++++--
 4 files changed, 34 insertions(+), 4 deletions(-)

diff --git a/arch/mips/include/asm/mach-loongson64/boot_param.h b/arch/mips/include/asm/mach-loongson64/boot_param.h
index 4592841b6b0c..43737401dc06 100644
--- a/arch/mips/include/asm/mach-loongson64/boot_param.h
+++ b/arch/mips/include/asm/mach-loongson64/boot_param.h
@@ -198,7 +198,13 @@ enum loongson_bridge_type {
 	VIRTUAL = 3
 };
 
+enum loongson_fw_interface {
+	LOONGSON_LEFI,
+	LOONGSON_DTB,
+};
+
 struct loongson_system_configuration {
+	enum loongson_fw_interface fw_interface;
 	u32 nr_cpus;
 	u32 nr_nodes;
 	int cores_per_node;
diff --git a/arch/mips/include/asm/mach-loongson64/loongson.h b/arch/mips/include/asm/mach-loongson64/loongson.h
index ac1c20e172a2..3f885fa26ba6 100644
--- a/arch/mips/include/asm/mach-loongson64/loongson.h
+++ b/arch/mips/include/asm/mach-loongson64/loongson.h
@@ -23,7 +23,8 @@ extern u32 memsize, highmemsize;
 extern const struct plat_smp_ops loongson3_smp_ops;
 
 /* loongson-specific command line, env and memory initialization */
-extern void __init prom_init_env(void);
+extern void __init prom_dtb_init_env(void);
+extern void __init prom_lefi_init_env(void);
 extern void __init szmem(unsigned int node);
 extern void *loongson_fdt_blob;
 
diff --git a/arch/mips/loongson64/env.c b/arch/mips/loongson64/env.c
index 51a5d050a94c..e7d3a06175e3 100644
--- a/arch/mips/loongson64/env.c
+++ b/arch/mips/loongson64/env.c
@@ -43,7 +43,18 @@ const char *get_system_type(void)
 	return "Generic Loongson64 System";
 }
 
-void __init prom_init_env(void)
+
+void __init prom_dtb_init_env(void)
+{
+	if ((fw_arg2 < CKSEG0 || fw_arg2 > CKSEG1)
+		&& (fw_arg2 < XKPHYS || fw_arg2 > XKSEG))
+
+		loongson_fdt_blob = __dtb_loongson64_2core_2k1000_begin;
+	else
+		loongson_fdt_blob = (void *)fw_arg2;
+}
+
+void __init prom_lefi_init_env(void)
 {
 	struct boot_params *boot_p;
 	struct loongson_params *loongson_p;
diff --git a/arch/mips/loongson64/init.c b/arch/mips/loongson64/init.c
index cfa788bca871..ed280b73bf89 100644
--- a/arch/mips/loongson64/init.c
+++ b/arch/mips/loongson64/init.c
@@ -52,6 +52,10 @@ void __init szmem(unsigned int node)
 	static unsigned long num_physpages;
 	u64 node_id, node_psize, start_pfn, end_pfn, mem_start, mem_size;
 
+	/* Otherwise come from DTB */
+	if (loongson_sysconf.fw_interface != LOONGSON_LEFI)
+		return;
+
 	/* Parse memory information and activate */
 	for (i = 0; i < loongson_memmap->nr_map; i++) {
 		node_id = loongson_memmap->map[i].node_id;
@@ -94,12 +98,20 @@ static void __init prom_init_memory(void)
 void __init prom_init(void)
 {
 	fw_init_cmdline();
-	prom_init_env();
+
+	if (fw_arg2 == 0 || (fdt_magic(fw_arg2) == FDT_MAGIC)) {
+		loongson_sysconf.fw_interface = LOONGSON_DTB;
+		prom_dtb_init_env();
+	} else {
+		loongson_sysconf.fw_interface = LOONGSON_LEFI;
+		prom_lefi_init_env();
+	}
 
 	/* init base address of io space */
 	set_io_port_base(PCI_IOBASE);
 
-	loongson_sysconf.early_config();
+	if (loongson_sysconf.early_config)
+		loongson_sysconf.early_config();
 
 #ifdef CONFIG_NUMA
 	prom_init_numa_memory();
-- 
2.20.1


  parent reply	other threads:[~2021-03-10  7:57 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-10  7:56 [PATCH v4 0/7] Add basic support for Loongson-2K1000 Qing Zhang
2021-03-10  7:56 ` [PATCH v4 1/7] MIPS: Loongson64: DeviceTree " Qing Zhang
2021-03-10  7:56 ` Qing Zhang [this message]
2021-03-10 10:57   ` [PATCH v4 2/7] MIPS: Loongson64: Distinguish firmware dependencies DTB/LEFI Oleksij Rempel
2021-03-10 12:12     ` Jiaxun Yang
2021-03-10 13:26       ` Oleksij Rempel
     [not found]         ` <a2b1ad18-8f4b-8e43-e175-c372580a7168@flygoat.com>
2021-03-10 16:03           ` Oleksij Rempel
2021-03-10  7:56 ` [PATCH v4 3/7] MIPS: Loongson64: Add support for the Loongson-2K1000 to get cpu_clock_freq Qing Zhang
2021-03-10  8:50   ` Sergei Shtylyov
2021-03-10  9:37     ` zhangqing
2021-03-10 12:06       ` Jiaxun Yang
2021-03-10  7:56 ` [PATCH v4 4/7] MIPS: Loongson64: Add Loongson-2K1000 early_printk_port Qing Zhang
2021-03-10  7:56 ` [PATCH v4 5/7] irqchip/loongson-liointc: irqchip add 2.0 version Qing Zhang
2021-03-10  7:56 ` [PATCH v4 6/7] dt-bindings: interrupt-controller: Add Loongson-2K1000 LIOINTC Qing Zhang
2021-03-10 12:04   ` Jiaxun Yang
2021-03-11  1:43     ` zhangqing
2021-03-10  7:56 ` [PATCH v4 7/7] MIPS: Loongson64: Add a Loongson-2K1000 default config file Qing Zhang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210310075639.20372-3-zhangqing@loongson.cn \
    --to=zhangqing@loongson.cn \
    --cc=chenhuacai@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jiaxun.yang@flygoat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=tsbogend@alpha.franken.de \
    --cc=wangming01@loongson.cn \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).