From: Tong Zhang <ztong0001@gmail.com>
To: Giovanni Cabiddu <giovanni.cabiddu@intel.com>,
Herbert Xu <herbert@gondor.apana.org.au>,
"David S. Miller" <davem@davemloft.net>,
Wojciech Ziemba <wojciech.ziemba@intel.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Fiona Trahe <fiona.trahe@intel.com>,
Tong Zhang <ztong0001@gmail.com>,
qat-linux@intel.com, linux-crypto@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] crypto: qat: ADF_STATUS_PF_RUNNING should be set after adf_dev_init
Date: Fri, 12 Mar 2021 02:43:58 -0500 [thread overview]
Message-ID: <20210312074357.2384087-3-ztong0001@gmail.com> (raw)
In-Reply-To: <20210312074357.2384087-1-ztong0001@gmail.com>
ADF_STATUS_PF_RUNNING is (only) used and checked by adf_vf2pf_shutdown()
before calling adf_iov_putmsg()->mutex_lock(vf2pf_lock), however the
vf2pf_lock is initialized in adf_dev_init(), which can fail and when it
fail, the vf2pf_lock is either not initialized or destroyed, a subsequent
use of vf2pf_lock will cause issue.
To fix this issue, only set this flag if adf_dev_init() returns 0.
[ 7.178008] ==================================================================
[ 7.178404] BUG: KASAN: user-memory-access in __mutex_lock.isra.0+0x1ac/0x7c0
[ 7.178800] Read of size 4 at addr 000000000000f434 by task modprobe/96
[ 7.179169]
[ 7.179257] CPU: 0 PID: 96 Comm: modprobe Not tainted 5.12.0-rc2-00338-gf78d76e72a46-dirty #86
[ 7.179730] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-4
[ 7.180345] Call Trace:
[ 7.180485] dump_stack+0x8a/0xb5
[ 7.180676] kasan_report.cold+0x10f/0x111
[ 7.180907] ? __mutex_lock.isra.0+0x1ac/0x7c0
[ 7.181156] __mutex_lock.isra.0+0x1ac/0x7c0
[ 7.181394] ? finish_task_switch+0x12f/0x360
[ 7.181640] ? __switch_to+0x339/0x6b0
[ 7.181852] ? ww_mutex_lock_interruptible+0x150/0x150
[ 7.182138] ? __sched_text_start+0x8/0x8
[ 7.182363] ? vprintk_emit+0x91/0x170
[ 7.182576] mutex_lock+0xc9/0xd0
[ 7.182765] ? __mutex_lock_slowpath+0x10/0x10
[ 7.183016] ? swsusp_write.cold+0x208/0x208
[ 7.183257] adf_iov_putmsg+0x118/0x1a0 [intel_qat]
[ 7.183541] adf_vf2pf_shutdown+0x4d/0x7b [intel_qat]
[ 7.183834] adf_dev_shutdown+0x172/0x2b0 [intel_qat]
[ 7.184127] adf_probe+0x5e9/0x600 [qat_dh895xccvf]
[ 7.184403] ? adf_remove+0x70/0x70 [qat_dh895xccvf]
[ 7.184681] ? _raw_spin_lock_irqsave+0x7b/0xd0
[ 7.184936] ? _raw_spin_unlock_irqrestore+0xd/0x20
[ 7.185209] ? adf_remove+0x70/0x70 [qat_dh895xccvf]
[ 7.185489] local_pci_probe+0x6f/0xb0
[ 7.185702] pci_device_probe+0x1e9/0x2f0
[ 7.185928] ? pci_device_remove+0xf0/0xf0
[ 7.186159] ? sysfs_do_create_link_sd.isra.0+0x76/0xe0
[ 7.186458] really_probe+0x161/0x420
[ 7.186665] driver_probe_device+0x6d/0xd0
[ 7.186894] device_driver_attach+0x82/0x90
[ 7.187131] ? device_driver_attach+0x90/0x90
[ 7.187375] __driver_attach+0x60/0x100
[ 7.187591] ? device_driver_attach+0x90/0x90
[ 7.187835] bus_for_each_dev+0xe1/0x140
[ 7.188057] ? subsys_dev_iter_exit+0x10/0x10
[ 7.188302] ? klist_node_init+0x61/0x80
[ 7.188524] bus_add_driver+0x254/0x2a0
[ 7.188740] driver_register+0xd3/0x150
[ 7.188956] ? 0xffffffffc0050000
[ 7.189143] adfdrv_init+0x2b/0x1000 [qat_dh895xccvf]
[ 7.189427] do_one_initcall+0x84/0x250
[ 7.189644] ? trace_event_raw_event_initcall_finish+0x150/0x150
[ 7.189977] ? _raw_spin_unlock_irqrestore+0xd/0x20
[ 7.190250] ? create_object+0x395/0x510
[ 7.190472] ? kasan_unpoison+0x21/0x50
[ 7.190689] do_init_module+0xf8/0x350
[ 7.190901] load_module+0x40c5/0x4410
[ 7.191121] ? module_frob_arch_sections+0x20/0x20
[ 7.191390] ? kernel_read_file+0x1cd/0x3e0
[ 7.191626] ? __do_sys_finit_module+0x108/0x170
[ 7.191885] __do_sys_finit_module+0x108/0x170
[ 7.192134] ? __ia32_sys_init_module+0x40/0x40
[ 7.192389] ? file_open_root+0x200/0x200
[ 7.192615] ? do_sys_open+0x85/0xe0
[ 7.192817] ? filp_open+0x50/0x50
[ 7.193010] ? exit_to_user_mode_prepare+0xfc/0x130
[ 7.193283] do_syscall_64+0x33/0x40
[ 7.193486] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 7.193770] RIP: 0033:0x7f6ad21b4cf7
[ 7.193971] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f7 48 89 d6 41
[ 7.194991] RSP: 002b:00007ffe2a5d9028 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 7.195408] RAX: ffffffffffffffda RBX: 0000000000882a70 RCX: 00007f6ad21b4cf7
[ 7.195801] RDX: 0000000000000000 RSI: 00000000008819e0 RDI: 0000000000000003
[ 7.196193] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001
[ 7.196588] R10: 00007f6ad2218300 R11: 0000000000000246 R12: 00000000008819e0
[ 7.196979] R13: 0000000000000000 R14: 0000000000881dd0 R15: 0000000000000001
[ 7.197372] ==================================================================
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
---
drivers/crypto/qat/qat_c3xxxvf/adf_drv.c | 4 ++--
drivers/crypto/qat/qat_c62xvf/adf_drv.c | 4 ++--
drivers/crypto/qat/qat_dh895xccvf/adf_drv.c | 4 ++--
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/crypto/qat/qat_c3xxxvf/adf_drv.c b/drivers/crypto/qat/qat_c3xxxvf/adf_drv.c
index 1d1532e8fb6d..067ca5e17d38 100644
--- a/drivers/crypto/qat/qat_c3xxxvf/adf_drv.c
+++ b/drivers/crypto/qat/qat_c3xxxvf/adf_drv.c
@@ -184,12 +184,12 @@ static int adf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (ret)
goto out_err_free_reg;
- set_bit(ADF_STATUS_PF_RUNNING, &accel_dev->status);
-
ret = adf_dev_init(accel_dev);
if (ret)
goto out_err_dev_shutdown;
+ set_bit(ADF_STATUS_PF_RUNNING, &accel_dev->status);
+
ret = adf_dev_start(accel_dev);
if (ret)
goto out_err_dev_stop;
diff --git a/drivers/crypto/qat/qat_c62xvf/adf_drv.c b/drivers/crypto/qat/qat_c62xvf/adf_drv.c
index 04742a6d91ca..51ea88c0b17d 100644
--- a/drivers/crypto/qat/qat_c62xvf/adf_drv.c
+++ b/drivers/crypto/qat/qat_c62xvf/adf_drv.c
@@ -184,12 +184,12 @@ static int adf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (ret)
goto out_err_free_reg;
- set_bit(ADF_STATUS_PF_RUNNING, &accel_dev->status);
-
ret = adf_dev_init(accel_dev);
if (ret)
goto out_err_dev_shutdown;
+ set_bit(ADF_STATUS_PF_RUNNING, &accel_dev->status);
+
ret = adf_dev_start(accel_dev);
if (ret)
goto out_err_dev_stop;
diff --git a/drivers/crypto/qat/qat_dh895xccvf/adf_drv.c b/drivers/crypto/qat/qat_dh895xccvf/adf_drv.c
index c972554a755e..29999da716cc 100644
--- a/drivers/crypto/qat/qat_dh895xccvf/adf_drv.c
+++ b/drivers/crypto/qat/qat_dh895xccvf/adf_drv.c
@@ -184,12 +184,12 @@ static int adf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (ret)
goto out_err_free_reg;
- set_bit(ADF_STATUS_PF_RUNNING, &accel_dev->status);
-
ret = adf_dev_init(accel_dev);
if (ret)
goto out_err_dev_shutdown;
+ set_bit(ADF_STATUS_PF_RUNNING, &accel_dev->status);
+
ret = adf_dev_start(accel_dev);
if (ret)
goto out_err_dev_stop;
--
2.25.1
next prev parent reply other threads:[~2021-03-12 7:45 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-12 7:43 [PATCH 0/2] crypto: qat: fix couple crashes duing error handling Tong Zhang
2021-03-12 7:43 ` [PATCH 1/2] crypto: qat - dont release uninitialized resources Tong Zhang
2021-03-12 7:43 ` Tong Zhang [this message]
2021-03-12 8:55 ` [PATCH 2/2] crypto: qat: ADF_STATUS_PF_RUNNING should be set after adf_dev_init Andy Shevchenko
2021-03-12 14:20 ` Tong Zhang
2021-03-12 11:32 ` [PATCH 0/2] crypto: qat: fix couple crashes duing error handling Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210312074357.2384087-3-ztong0001@gmail.com \
--to=ztong0001@gmail.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=davem@davemloft.net \
--cc=fiona.trahe@intel.com \
--cc=giovanni.cabiddu@intel.com \
--cc=herbert@gondor.apana.org.au \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=qat-linux@intel.com \
--cc=wojciech.ziemba@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).