linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Henning Schild <henning.schild@siemens.com>
To: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Linux LED Subsystem <linux-leds@vger.kernel.org>,
	Platform Driver <platform-driver-x86@vger.kernel.org>,
	linux-watchdog@vger.kernel.org,
	Srikanth Krishnakar <skrishnakar@gmail.com>,
	Jan Kiszka <jan.kiszka@siemens.com>,
	Gerd Haeussler <gerd.haeussler.ext@siemens.com>,
	Guenter Roeck <linux@roeck-us.net>,
	Wim Van Sebroeck <wim@linux-watchdog.org>,
	Mark Gross <mgross@linux.intel.com>,
	Hans de Goede <hdegoede@redhat.com>, Pavel Machek <pavel@ucw.cz>
Subject: Re: [PATCH v2 1/4] platform/x86: simatic-ipc: add main driver for Siemens devices
Date: Mon, 15 Mar 2021 17:30:49 +0100	[thread overview]
Message-ID: <20210315173049.1d080129@md1za8fc.ad001.siemens.net> (raw)
In-Reply-To: <CAHp75VdXDcTfNL9QRQ5XE-zVLHacfMKHUxhse3=dAfJbOJdObQ@mail.gmail.com>

Am Mon, 15 Mar 2021 12:31:11 +0200
schrieb Andy Shevchenko <andy.shevchenko@gmail.com>:

> On Mon, Mar 15, 2021 at 12:02 PM Henning Schild
> <henning.schild@siemens.com> wrote:
> >
> > This mainly implements detection of these devices and will allow
> > secondary drivers to work on such machines.
> >
> > The identification is DMI-based with a vendor specific way to tell
> > them apart in a reliable way.
> >
> > Drivers for LEDs and Watchdogs will follow to make use of that
> > platform detection.  
> 
> ...
> 
> > +static int register_platform_devices(u32 station_id)
> > +{
> > +       u8 ledmode = SIMATIC_IPC_DEVICE_NONE;
> > +       u8 wdtmode = SIMATIC_IPC_DEVICE_NONE;
> > +       int i;
> > +
> > +       platform_data.devmode = SIMATIC_IPC_DEVICE_NONE;
> > +
> > +       for (i = 0; i < ARRAY_SIZE(device_modes); i++) {
> > +               if (device_modes[i].station_id == station_id) {
> > +                       ledmode = device_modes[i].led_mode;
> > +                       wdtmode = device_modes[i].wdt_mode;
> > +                       break;
> > +               }
> > +       }
> > +
> > +       if (ledmode != SIMATIC_IPC_DEVICE_NONE) {
> > +               platform_data.devmode = ledmode;
> > +               ipc_led_platform_device =
> > +                       platform_device_register_data(NULL,
> > +                               KBUILD_MODNAME "_leds",
> > PLATFORM_DEVID_NONE,
> > +                               &platform_data,
> > +                               sizeof(struct
> > simatic_ipc_platform));
> > +               if (IS_ERR(ipc_led_platform_device))
> > +                       return PTR_ERR(ipc_led_platform_device);
> > +
> > +               pr_debug("device=%s created\n",
> > +                        ipc_led_platform_device->name);
> > +       }
> > +
> > +       if (wdtmode != SIMATIC_IPC_DEVICE_NONE) {
> > +               platform_data.devmode = wdtmode;
> > +               ipc_wdt_platform_device =
> > +                       platform_device_register_data(NULL,
> > +                               KBUILD_MODNAME "_wdt",
> > PLATFORM_DEVID_NONE,
> > +                               &platform_data,
> > +                               sizeof(struct
> > simatic_ipc_platform));
> > +               if (IS_ERR(ipc_wdt_platform_device))
> > +                       return PTR_ERR(ipc_wdt_platform_device);
> > +
> > +               pr_debug("device=%s created\n",
> > +                        ipc_wdt_platform_device->name);
> > +       }
> > +
> > +       if (ledmode == SIMATIC_IPC_DEVICE_NONE &&
> > +           wdtmode == SIMATIC_IPC_DEVICE_NONE) {
> > +               pr_warn("unsupported IPC detected, station
> > id=%08x\n",
> > +                       station_id);
> > +               return -EINVAL;
> > +       }
> > +
> > +       return 0;
> > +}  
> 
> Why not use MFD here?
> 
> ...
> 
> > +/*
> > + * Get membase address from PCI, used in leds and wdt modul. Here
> > we read
> > + * the bar0. The final address calculation is done in the
> > appropriate modules
> > + */  
> 
> No blank line here.
> 
> I would add FIXME or REVISIT here to point out that this should be
> deduplicated in the future.

Sure i forgot the mention that ordering problem of the two series here
again specifically. Was kind of assuming yours would maybe be first and
that code not being reviewed again ... 
The code is there to test and propose something "working" not something
i expect to be merged as is.

regards,
Henning

> > +u32 simatic_ipc_get_membase0(unsigned int p2sb)
> > +{
> > +       struct pci_bus *bus;
> > +       u32 bar0 = 0;
> > +
> > +       /*
> > +        * The GPIO memory is bar0 of the hidden P2SB device.
> > Unhide the device  
> 
> No, it's not a GPIO's bar. It's P2SB's one. GPIO resides in that bar
> somewhere.
> 
> > +        * to have a quick look at it, before we hide it again.
> > +        * Also grab the pci rescan lock so that device does not
> > get discovered
> > +        * and remapped while it is visible.
> > +        * This code is inspired by drivers/mfd/lpc_ich.c
> > +        */
> > +       bus = pci_find_bus(0, 0);
> > +       pci_lock_rescan_remove();
> > +       pci_bus_write_config_byte(bus, p2sb, 0xE1, 0x0);
> > +       pci_bus_read_config_dword(bus, p2sb, PCI_BASE_ADDRESS_0,
> > &bar0); +
> > +       bar0 &= ~0xf;
> > +       pci_bus_write_config_byte(bus, p2sb, 0xE1, 0x1);
> > +       pci_unlock_rescan_remove();
> > +
> > +       return bar0;
> > +}
> > +EXPORT_SYMBOL(simatic_ipc_get_membase0);  
> 
> ...
> 
> > +static inline u32 simatic_ipc_get_station_id(u8 *data, int max_len)
> > +{
> > +       u32 station_id = SIMATIC_IPC_INVALID_STATION_ID;
> > +       int i;  
> 
> Reversed xmas tree order, please.
> 
> > +       struct {
> > +               u8      type;           /* type (0xff = binary) */
> > +               u8      len;            /* len of data entry */
> > +               u8      reserved[3];
> > +               u32     station_id;     /* station id (LE) */  
> 
> > +       } __packed
> > +       *data_entry = (void *)data + sizeof(struct dmi_header);  
> 
> Can be one line.
> 
> > +       /* find 4th entry in OEM data */
> > +       for (i = 0; i < 3; i++)  
> 
> 3 is magic!
> 
> > +               data_entry = (void *)((u8 *)(data_entry) +
> > data_entry->len); +
> > +       /* decode station id */
> > +       if (data_entry && (u8 *)data_entry < data + max_len &&
> > +           data_entry->type == 0xff && data_entry->len == 9)
> > +               station_id = le32_to_cpu(data_entry->station_id);
> > +
> > +       return station_id;
> > +}  
> 


  reply	other threads:[~2021-03-15 16:32 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-15  9:57 [PATCH v2 0/4] add device drivers for Siemens Industrial PCs Henning Schild
2021-03-15  9:57 ` [PATCH v2 1/4] platform/x86: simatic-ipc: add main driver for Siemens devices Henning Schild
2021-03-15 10:31   ` Andy Shevchenko
2021-03-15 16:30     ` Henning Schild [this message]
2021-03-17 19:13     ` Henning Schild
2021-03-17 20:03       ` Hans de Goede
2021-03-18 11:30         ` Enrico Weigelt, metux IT consult
2021-03-18 11:45           ` Hans de Goede
2021-03-26  9:55             ` Henning Schild
2021-03-26 12:21               ` Hans de Goede
2021-03-15  9:57 ` [PATCH v2 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs Henning Schild
2021-03-15 10:48   ` Andy Shevchenko
2021-03-15 11:19     ` Pavel Machek
2021-03-15 11:26       ` Andy Shevchenko
2021-03-15 12:40       ` Henning Schild
2021-03-18 11:38       ` Enrico Weigelt, metux IT consult
2021-03-27  9:46         ` Henning Schild
2021-04-01 16:20           ` Enrico Weigelt, metux IT consult
2021-03-27  9:56       ` Henning Schild
2021-03-18 10:27     ` Enrico Weigelt, metux IT consult
2021-03-18 12:40       ` Alexander Dahl
2021-03-23 17:45         ` Henning Schild
2021-03-26 16:33     ` Henning Schild
2021-03-18 10:25   ` Enrico Weigelt, metux IT consult
2021-03-27 11:16     ` Henning Schild
2021-03-27 11:41       ` Henning Schild
2021-03-15  9:57 ` [PATCH v2 3/4] watchdog: simatic-ipc-wdt: add new driver for Siemens Industrial PCs Henning Schild
2021-03-15 15:10   ` Guenter Roeck
2021-03-29 16:28     ` Henning Schild
2021-03-15  9:57 ` [PATCH v2 4/4] platform/x86: pmc_atom: improve critclk_systems matching for Siemens PCs Henning Schild
2021-03-15 10:14   ` Henning Schild
2021-03-15 10:19     ` Hans de Goede
2021-03-15 12:09       ` Henning Schild
2021-03-15 14:58       ` [PATCH] platform/x86: pmc_atom: use callback for all dmi quirk entries Henning Schild
2021-03-15 16:31         ` Hans de Goede
2021-03-15 17:00           ` Henning Schild
2021-03-15 18:01             ` Hans de Goede
2021-03-16  5:47               ` Henning Schild
2021-03-16  9:43                 ` Hans de Goede
2021-03-15 13:25   ` [PATCH v2 4/4] platform/x86: pmc_atom: improve critclk_systems matching for Siemens PCs kernel test robot
2021-03-15 10:55 ` [PATCH v2 0/4] add device drivers for Siemens Industrial PCs Andy Shevchenko
2021-03-15 16:08   ` Henning Schild
2021-08-02  9:21   ` Henning Schild

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210315173049.1d080129@md1za8fc.ad001.siemens.net \
    --to=henning.schild@siemens.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=gerd.haeussler.ext@siemens.com \
    --cc=hdegoede@redhat.com \
    --cc=jan.kiszka@siemens.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=mgross@linux.intel.com \
    --cc=pavel@ucw.cz \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=skrishnakar@gmail.com \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).