From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Sebastian Reichel <sre@kernel.org>, Rob Herring <robh+dt@kernel.org>
Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Sebastian Reichel <sebastian.reichel@collabora.com>,
kernel@collabora.com
Subject: [PATCHv2 13/38] dt-bindings: power: supply: sc27xx-fg: Convert to DT schema format
Date: Wed, 17 Mar 2021 14:48:39 +0100 [thread overview]
Message-ID: <20210317134904.80737-14-sebastian.reichel@collabora.com> (raw)
In-Reply-To: <20210317134904.80737-1-sebastian.reichel@collabora.com>
Convert the binding to DT schema format.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
.../bindings/power/supply/sc27xx-fg.txt | 59 -----------
.../bindings/power/supply/sc27xx-fg.yaml | 98 +++++++++++++++++++
2 files changed, 98 insertions(+), 59 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt
create mode 100644 Documentation/devicetree/bindings/power/supply/sc27xx-fg.yaml
diff --git a/Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt
deleted file mode 100644
index b6359b590383..000000000000
--- a/Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-Spreadtrum SC27XX PMICs Fuel Gauge Unit Power Supply Bindings
-
-Required properties:
-- compatible: Should be one of the following:
- "sprd,sc2720-fgu",
- "sprd,sc2721-fgu",
- "sprd,sc2723-fgu",
- "sprd,sc2730-fgu",
- "sprd,sc2731-fgu".
-- reg: The address offset of fuel gauge unit.
-- battery-detect-gpios: GPIO for battery detection.
-- io-channels: Specify the IIO ADC channels to get temperature and charge voltage.
-- io-channel-names: Should be "bat-temp" or "charge-vol".
-- nvmem-cells: A phandle to the calibration cells provided by eFuse device.
-- nvmem-cell-names: Should be "fgu_calib".
-- sprd,calib-resistance-micro-ohms: Specify the real resistance of coulomb counter
- chip in micro Ohms.
-- monitored-battery: Phandle of battery characteristics devicetree node.
- See Documentation/devicetree/bindings/power/supply/battery.txt
-
-Example:
-
- bat: battery {
- compatible = "simple-battery";
- charge-full-design-microamp-hours = <1900000>;
- constant-charge-voltage-max-microvolt = <4350000>;
- ocv-capacity-celsius = <20>;
- ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>,
- <4022000 85>, <3983000 80>, <3949000 75>,
- <3917000 70>, <3889000 65>, <3864000 60>,
- <3835000 55>, <3805000 50>, <3787000 45>,
- <3777000 40>, <3773000 35>, <3770000 30>,
- <3765000 25>, <3752000 20>, <3724000 15>,
- <3680000 10>, <3605000 5>, <3400000 0>;
- ......
- };
-
- sc2731_pmic: pmic@0 {
- compatible = "sprd,sc2731";
- reg = <0>;
- spi-max-frequency = <26000000>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- #interrupt-cells = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- fgu@a00 {
- compatible = "sprd,sc2731-fgu";
- reg = <0xa00>;
- battery-detect-gpios = <&pmic_eic 9 GPIO_ACTIVE_HIGH>;
- io-channels = <&pmic_adc 5>, <&pmic_adc 14>;
- io-channel-names = "bat-temp", "charge-vol";
- nvmem-cells = <&fgu_calib>;
- nvmem-cell-names = "fgu_calib";
- monitored-battery = <&bat>;
- sprd,calib-resistance-micro-ohms = <21500>;
- };
- };
diff --git a/Documentation/devicetree/bindings/power/supply/sc27xx-fg.yaml b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.yaml
new file mode 100644
index 000000000000..e019cffd1f38
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/sc27xx-fg.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Spreadtrum SC27XX PMICs Fuel Gauge Unit Power Supply Bindings
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ enum:
+ - sprd,sc2720-fgu
+ - sprd,sc2721-fgu
+ - sprd,sc2723-fgu
+ - sprd,sc2730-fgu
+ - sprd,sc2731-fgu
+
+ reg:
+ maxItems: 1
+
+ battery-detect-gpios:
+ maxItems: 1
+
+ io-channels:
+ items:
+ - description: Battery Temperature ADC
+ - description: Battery Charge Voltage ADC
+
+ io-channel-names:
+ items:
+ - const: bat-temp
+ - const: charge-vol
+
+ nvmem-cells:
+ maxItems: 1
+ description: Calibration cells provided by eFuse device
+
+ nvmem-cell-names:
+ const: fgu_calib
+
+ sprd,calib-resistance-micro-ohms:
+ description: real resistance of coulomb counter chip in micro Ohms
+
+ monitored-battery: true
+
+required:
+ - compatible
+ - reg
+ - battery-detect-gpios
+ - io-channels
+ - io-channel-names
+ - nvmem-cells
+ - nvmem-cell-names
+ - sprd,calib-resistance-micro-ohms
+ - monitored-battery
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ bat: battery {
+ compatible = "simple-battery";
+ charge-full-design-microamp-hours = <1900000>;
+ constant-charge-voltage-max-microvolt = <4350000>;
+ ocv-capacity-celsius = <20>;
+ ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>,
+ <4022000 85>, <3983000 80>, <3949000 75>,
+ <3917000 70>, <3889000 65>, <3864000 60>,
+ <3835000 55>, <3805000 50>, <3787000 45>,
+ <3777000 40>, <3773000 35>, <3770000 30>,
+ <3765000 25>, <3752000 20>, <3724000 15>,
+ <3680000 10>, <3605000 5>, <3400000 0>;
+ // ...
+ };
+
+ pmic {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ battery@a00 {
+ compatible = "sprd,sc2731-fgu";
+ reg = <0xa00>;
+ battery-detect-gpios = <&pmic_eic 9 GPIO_ACTIVE_HIGH>;
+ io-channels = <&pmic_adc 5>, <&pmic_adc 14>;
+ io-channel-names = "bat-temp", "charge-vol";
+ nvmem-cells = <&fgu_calib>;
+ nvmem-cell-names = "fgu_calib";
+ monitored-battery = <&bat>;
+ sprd,calib-resistance-micro-ohms = <21500>;
+ };
+ };
--
2.30.2
next prev parent reply other threads:[~2021-03-17 13:50 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-17 13:48 [PATCHv2 00/38] Convert power-supply DT bindings to YAML Sebastian Reichel
2021-03-17 13:48 ` [PATCHv2 01/38] ARM: dts: motorola-cpcap-mapphone: Prepare for dtbs_check parsing Sebastian Reichel
2021-03-17 14:29 ` Tony Lindgren
2021-03-23 12:51 ` Sebastian Reichel
2021-03-23 12:56 ` Tony Lindgren
2021-03-17 13:48 ` [PATCHv2 02/38] dt-bindings: power: supply: cpcap-battery: Convert to DT schema format Sebastian Reichel
2021-03-19 10:18 ` Tony Lindgren
2021-03-17 13:48 ` [PATCHv2 03/38] dt-bindings: power: supply: cpcap-charger: " Sebastian Reichel
2021-03-19 10:18 ` Tony Lindgren
2021-03-17 13:48 ` [PATCHv2 04/38] dt-bindings: power: supply: bq25890: " Sebastian Reichel
2021-03-17 13:48 ` [PATCHv2 05/38] dt-bindings: power: supply: bq24257: " Sebastian Reichel
2021-03-17 13:48 ` [PATCHv2 06/38] dt-bindings: power: supply: bq24190: " Sebastian Reichel
2021-03-17 13:48 ` [PATCHv2 07/38] dt-bindings: power: supply: bq2415x: " Sebastian Reichel
2021-03-17 13:48 ` [PATCHv2 08/38] dt-bindings: power: supply: bq24735: " Sebastian Reichel
2021-03-17 13:48 ` [PATCHv2 09/38] dt-bindings: power: supply: isp1704: " Sebastian Reichel
2021-03-17 13:48 ` [PATCHv2 10/38] dt-bindings: power: supply: sbs-charger: " Sebastian Reichel
2021-03-17 13:48 ` [PATCHv2 11/38] dt-bindings: power: supply: sbs-manager: " Sebastian Reichel
2021-03-17 13:48 ` [PATCHv2 12/38] dt-bindings: power: supply: ds2760: " Sebastian Reichel
2021-03-17 13:48 ` Sebastian Reichel [this message]
2021-03-17 13:48 ` [PATCHv2 14/38] dt-bindings: power: supply: sc2731-charger: " Sebastian Reichel
2021-03-17 13:48 ` [PATCHv2 15/38] dt-bindings: power: supply: tps65090: " Sebastian Reichel
2021-03-17 13:48 ` [PATCHv2 16/38] dt-bindings: power: supply: tps65217: " Sebastian Reichel
2021-03-17 13:48 ` [PATCHv2 17/38] dt-bindings: power: supply: twl4030: " Sebastian Reichel
2021-03-17 13:48 ` [PATCHv2 18/38] dt-bindings: power: supply: n900-battery: " Sebastian Reichel
2021-03-17 17:01 ` Pali Rohár
2021-03-17 13:48 ` [PATCHv2 19/38] dt-bindings: power: supply: lego-ev3-battery: " Sebastian Reichel
2021-03-23 16:57 ` David Lechner
2021-03-17 13:48 ` [PATCHv2 20/38] dt-bindings: power: supply: max17040: " Sebastian Reichel
2021-03-17 13:48 ` [PATCHv2 21/38] dt-bindings: power: supply: max14656: " Sebastian Reichel
2021-03-17 13:48 ` [PATCHv2 22/38] dt-bindings: power: supply: max17042: " Sebastian Reichel
2021-03-17 13:48 ` [PATCHv2 23/38] dt-bindings: power: supply: max8903: " Sebastian Reichel
2021-03-17 13:48 ` [PATCHv2 24/38] dt-bindings: power: supply: ucs1002: " Sebastian Reichel
2021-03-17 13:48 ` [PATCHv2 25/38] dt-bindings: power: supply: pm8941-charger: " Sebastian Reichel
2021-03-17 13:48 ` [PATCHv2 26/38] dt-bindings: power: supply: pm8941-coincell: " Sebastian Reichel
2021-03-17 13:48 ` [PATCHv2 27/38] dt-bindings: power: supply: act8945a: " Sebastian Reichel
2021-03-17 13:48 ` [PATCHv2 28/38] dt-bindings: power: supply: axp20x: " Sebastian Reichel
2021-03-17 13:48 ` [PATCHv2 29/38] dt-bindings: power: supply: da9150: " Sebastian Reichel
2021-03-17 13:48 ` [PATCHv2 30/38] dt-bindings: power: supply: lp8727: " Sebastian Reichel
2021-03-17 13:48 ` [PATCHv2 31/38] dt-bindings: power: supply: lt3651: " Sebastian Reichel
2021-03-17 13:48 ` [PATCHv2 32/38] dt-bindings: power: supply: ltc294x: " Sebastian Reichel
2021-03-17 13:48 ` [PATCHv2 33/38] dt-bindings: power: supply: rt9455: " Sebastian Reichel
2021-03-17 13:49 ` [PATCHv2 34/38] dt-bindings: power: supply: olpc-battery: " Sebastian Reichel
2021-03-17 13:49 ` [PATCHv2 35/38] dt-bindings: power: supply: ab8500: " Sebastian Reichel
2021-04-08 23:28 ` Linus Walleij
2021-04-09 13:43 ` Sebastian Reichel
2021-03-17 13:49 ` [PATCHv2 36/38] dt-bindings: power: supply: sbs-battery: Fix dtbs_check Sebastian Reichel
2021-03-17 13:49 ` [PATCHv2 37/38] dt-bindings: power: supply: Fix remaining battery.txt links Sebastian Reichel
2021-03-17 13:49 ` [PATCHv2 38/38] dt-bindings: power: supply: Drop power_supply.txt Sebastian Reichel
2021-03-22 16:25 ` [PATCHv2 00/38] Convert power-supply DT bindings to YAML Rob Herring
2021-03-22 21:42 ` Sebastian Reichel
2021-03-23 1:05 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210317134904.80737-14-sebastian.reichel@collabora.com \
--to=sebastian.reichel@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=kernel@collabora.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).