linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lizhi Hou <lizhi.hou@xilinx.com>
To: <linux-kernel@vger.kernel.org>
Cc: Lizhi Hou <lizhi.hou@xilinx.com>, <linux-fpga@vger.kernel.org>,
	<maxz@xilinx.com>, <sonal.santan@xilinx.com>, <yliu@xilinx.com>,
	<michal.simek@xilinx.com>, <stefanos@xilinx.com>,
	<devicetree@vger.kernel.org>, <trix@redhat.com>, <mdf@kernel.org>,
	<robh@kernel.org>, Max Zhen <max.zhen@xilinx.com>
Subject: [PATCH V4 XRT Alveo 14/20] fpga: xrt: ICAP platform driver
Date: Tue, 23 Mar 2021 22:29:41 -0700	[thread overview]
Message-ID: <20210324052947.27889-15-lizhi.hou@xilinx.com> (raw)
In-Reply-To: <20210324052947.27889-1-lizhi.hou@xilinx.com>

ICAP stands for Hardware Internal Configuration Access Port. ICAP is
discovered by walking firmware metadata. A platform device node will be
created for it. FPGA bitstream is written to hardware through ICAP.

Signed-off-by: Sonal Santan <sonal.santan@xilinx.com>
Signed-off-by: Max Zhen <max.zhen@xilinx.com>
Signed-off-by: Lizhi Hou <lizhi.hou@xilinx.com>
---
 drivers/fpga/xrt/include/xleaf/icap.h |  27 ++
 drivers/fpga/xrt/lib/xleaf/icap.c     | 344 ++++++++++++++++++++++++++
 2 files changed, 371 insertions(+)
 create mode 100644 drivers/fpga/xrt/include/xleaf/icap.h
 create mode 100644 drivers/fpga/xrt/lib/xleaf/icap.c

diff --git a/drivers/fpga/xrt/include/xleaf/icap.h b/drivers/fpga/xrt/include/xleaf/icap.h
new file mode 100644
index 000000000000..96d39a8934fa
--- /dev/null
+++ b/drivers/fpga/xrt/include/xleaf/icap.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020-2021 Xilinx, Inc.
+ *
+ * Authors:
+ *	Lizhi Hou <Lizhi.Hou@xilinx.com>
+ */
+
+#ifndef _XRT_ICAP_H_
+#define _XRT_ICAP_H_
+
+#include "xleaf.h"
+
+/*
+ * ICAP driver leaf calls.
+ */
+enum xrt_icap_leaf_cmd {
+	XRT_ICAP_WRITE = XRT_XLEAF_CUSTOM_BASE, /* See comments in xleaf.h */
+	XRT_ICAP_GET_IDCODE,
+};
+
+struct xrt_icap_wr {
+	void	*xiiw_bit_data;
+	u32	xiiw_data_len;
+};
+
+#endif	/* _XRT_ICAP_H_ */
diff --git a/drivers/fpga/xrt/lib/xleaf/icap.c b/drivers/fpga/xrt/lib/xleaf/icap.c
new file mode 100644
index 000000000000..13db2b759138
--- /dev/null
+++ b/drivers/fpga/xrt/lib/xleaf/icap.c
@@ -0,0 +1,344 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Xilinx Alveo FPGA ICAP Driver
+ *
+ * Copyright (C) 2020-2021 Xilinx, Inc.
+ *
+ * Authors:
+ *      Lizhi Hou<Lizhi.Hou@xilinx.com>
+ *      Sonal Santan <sonals@xilinx.com>
+ *      Max Zhen <maxz@xilinx.com>
+ */
+
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/regmap.h>
+#include <linux/io.h>
+#include "metadata.h"
+#include "xleaf.h"
+#include "xleaf/icap.h"
+#include "xclbin-helper.h"
+
+#define XRT_ICAP "xrt_icap"
+
+#define ICAP_ERR(icap, fmt, arg...)	\
+	xrt_err((icap)->pdev, fmt "\n", ##arg)
+#define ICAP_WARN(icap, fmt, arg...)	\
+	xrt_warn((icap)->pdev, fmt "\n", ##arg)
+#define ICAP_INFO(icap, fmt, arg...)	\
+	xrt_info((icap)->pdev, fmt "\n", ##arg)
+#define ICAP_DBG(icap, fmt, arg...)	\
+	xrt_dbg((icap)->pdev, fmt "\n", ##arg)
+
+/*
+ * AXI-HWICAP IP register layout. Please see
+ * https://www.xilinx.com/support/documentation/ip_documentation/axi_hwicap/v3_0/pg134-axi-hwicap.pdf
+ */
+#define ICAP_REG_GIER		0x1C
+#define ICAP_REG_ISR		0x20
+#define ICAP_REG_IER		0x28
+#define ICAP_REG_WF		0x100
+#define ICAP_REG_RF		0x104
+#define ICAP_REG_SZ		0x108
+#define ICAP_REG_CR		0x10C
+#define ICAP_REG_SR		0x110
+#define ICAP_REG_WFV		0x114
+#define ICAP_REG_RFO		0x118
+#define ICAP_REG_ASR		0x11C
+
+#define ICAP_STATUS_EOS		0x4
+#define ICAP_STATUS_DONE	0x1
+
+/*
+ * Canned command sequence to obtain IDCODE of the FPGA
+ */
+static const u32 idcode_stream[] = {
+	/* dummy word */
+	cpu_to_be32(0xffffffff),
+	/* sync word */
+	cpu_to_be32(0xaa995566),
+	/* NOP word */
+	cpu_to_be32(0x20000000),
+	/* NOP word */
+	cpu_to_be32(0x20000000),
+	/* ID code */
+	cpu_to_be32(0x28018001),
+	/* NOP word */
+	cpu_to_be32(0x20000000),
+	/* NOP word */
+	cpu_to_be32(0x20000000),
+};
+
+static const struct regmap_config icap_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = 0x1000,
+};
+
+struct icap {
+	struct platform_device	*pdev;
+	struct regmap		*regmap;
+	struct mutex		icap_lock; /* icap dev lock */
+
+	u32			idcode;
+};
+
+static int wait_for_done(const struct icap *icap)
+{
+	int i = 0;
+	int ret;
+	u32 w;
+
+	for (i = 0; i < 10; i++) {
+		/*
+		 * it requires few micro seconds for ICAP to process incoming data.
+		 * Polling every 5us for 10 times would be good enough.
+		 */
+		udelay(5);
+		ret = regmap_read(icap->regmap, ICAP_REG_SR, &w);
+		if (ret)
+			return ret;
+		ICAP_INFO(icap, "XHWICAP_SR: %x", w);
+		if (w & (ICAP_STATUS_EOS | ICAP_STATUS_DONE))
+			return 0;
+	}
+
+	ICAP_ERR(icap, "bitstream download timeout");
+	return -ETIMEDOUT;
+}
+
+static int icap_write(const struct icap *icap, const u32 *word_buf, int size)
+{
+	u32 value = 0;
+	int ret;
+	int i;
+
+	for (i = 0; i < size; i++) {
+		value = be32_to_cpu(word_buf[i]);
+		ret = regmap_write(icap->regmap, ICAP_REG_WF, value);
+		if (ret)
+			return ret;
+	}
+
+	ret = regmap_write(icap->regmap, ICAP_REG_CR, 0x1);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < 20; i++) {
+		ret = regmap_read(icap->regmap, ICAP_REG_CR, &value);
+		if (ret)
+			return ret;
+
+		if ((value & 0x1) == 0)
+			return 0;
+		ndelay(50);
+	}
+
+	ICAP_ERR(icap, "writing %d dwords timeout", size);
+	return -EIO;
+}
+
+static int bitstream_helper(struct icap *icap, const u32 *word_buffer,
+			    u32 word_count)
+{
+	int wr_fifo_vacancy = 0;
+	u32 word_written = 0;
+	u32 remain_word;
+	int err = 0;
+
+	WARN_ON(!mutex_is_locked(&icap->icap_lock));
+	for (remain_word = word_count; remain_word > 0;
+	     remain_word -= word_written, word_buffer += word_written) {
+		err = regmap_read(icap->regmap, ICAP_REG_WFV, &wr_fifo_vacancy);
+		if (err) {
+			ICAP_ERR(icap, "read wr_fifo_vacancy failed %d", err);
+			break;
+		}
+		if (wr_fifo_vacancy <= 0) {
+			ICAP_ERR(icap, "no vacancy: %d", wr_fifo_vacancy);
+			err = -EIO;
+			break;
+		}
+		word_written = (wr_fifo_vacancy < remain_word) ?
+			wr_fifo_vacancy : remain_word;
+		if (icap_write(icap, word_buffer, word_written) != 0) {
+			ICAP_ERR(icap, "write failed remain %d, written %d",
+				 remain_word, word_written);
+			err = -EIO;
+			break;
+		}
+	}
+
+	return err;
+}
+
+static int icap_download(struct icap *icap, const char *buffer,
+			 unsigned long length)
+{
+	u32	num_chars_read = XCLBIN_HWICAP_BITFILE_BUF_SZ;
+	u32	byte_read;
+	int	err = 0;
+
+	if (length % sizeof(u32)) {
+		ICAP_ERR(icap, "invalid bitstream length %ld", length);
+		return -EINVAL;
+	}
+
+	mutex_lock(&icap->icap_lock);
+	for (byte_read = 0; byte_read < length; byte_read += num_chars_read) {
+		num_chars_read = length - byte_read;
+		if (num_chars_read > XCLBIN_HWICAP_BITFILE_BUF_SZ)
+			num_chars_read = XCLBIN_HWICAP_BITFILE_BUF_SZ;
+
+		err = bitstream_helper(icap, (u32 *)buffer, num_chars_read / sizeof(u32));
+		if (err)
+			goto failed;
+		buffer += num_chars_read;
+	}
+
+	/* there is not any cleanup needs to be done if writing ICAP timeout. */
+	err = wait_for_done(icap);
+
+failed:
+	mutex_unlock(&icap->icap_lock);
+
+	return err;
+}
+
+/*
+ * Discover the FPGA IDCODE using special sequence of canned commands
+ */
+static int icap_probe_chip(struct icap *icap)
+{
+	int err;
+	u32 val = 0;
+
+	regmap_read(icap->regmap, ICAP_REG_SR, &val);
+	if (val != ICAP_STATUS_DONE)
+		return -ENODEV;
+	/* Read ICAP FIFO vacancy */
+	regmap_read(icap->regmap, ICAP_REG_WFV, &val);
+	if (val < 8)
+		return -ENODEV;
+	err = icap_write(icap, idcode_stream, ARRAY_SIZE(idcode_stream));
+	if (err)
+		return err;
+	err = wait_for_done(icap);
+	if (err)
+		return err;
+
+	/* Tell config engine how many words to transfer to read FIFO */
+	regmap_write(icap->regmap, ICAP_REG_SZ, 0x1);
+	/* Switch the ICAP to read mode */
+	regmap_write(icap->regmap, ICAP_REG_CR, 0x2);
+	err = wait_for_done(icap);
+	if (err)
+		return err;
+
+	/* Read IDCODE from Read FIFO */
+	regmap_read(icap->regmap, ICAP_REG_RF, &icap->idcode);
+	return 0;
+}
+
+static int
+xrt_icap_leaf_call(struct platform_device *pdev, u32 cmd, void *arg)
+{
+	struct xrt_icap_wr *wr_arg = arg;
+	struct icap *icap;
+	int ret = 0;
+
+	icap = platform_get_drvdata(pdev);
+
+	switch (cmd) {
+	case XRT_XLEAF_EVENT:
+		/* Does not handle any event. */
+		break;
+	case XRT_ICAP_WRITE:
+		ret = icap_download(icap, wr_arg->xiiw_bit_data,
+				    wr_arg->xiiw_data_len);
+		break;
+	case XRT_ICAP_GET_IDCODE:
+		*(u32 *)arg = icap->idcode;
+		break;
+	default:
+		ICAP_ERR(icap, "unknown command %d", cmd);
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int xrt_icap_probe(struct platform_device *pdev)
+{
+	void __iomem *base = NULL;
+	struct resource *res;
+	struct icap *icap;
+	int result = 0;
+
+	icap = devm_kzalloc(&pdev->dev, sizeof(*icap), GFP_KERNEL);
+	if (!icap)
+		return -ENOMEM;
+
+	icap->pdev = pdev;
+	platform_set_drvdata(pdev, icap);
+	mutex_init(&icap->icap_lock);
+
+	xrt_info(pdev, "probing");
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -EINVAL;
+
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	icap->regmap = devm_regmap_init_mmio(&pdev->dev, base, &icap_regmap_config);
+	if (IS_ERR(icap->regmap)) {
+		ICAP_ERR(icap, "init mmio failed");
+		return PTR_ERR(icap->regmap);
+	}
+	/* Disable ICAP interrupts */
+	regmap_write(icap->regmap, ICAP_REG_GIER, 0);
+
+	result = icap_probe_chip(icap);
+	if (result)
+		xrt_err(pdev, "Failed to probe FPGA");
+	else
+		xrt_info(pdev, "Discovered FPGA IDCODE %x", icap->idcode);
+	return result;
+}
+
+static struct xrt_subdev_endpoints xrt_icap_endpoints[] = {
+	{
+		.xse_names = (struct xrt_subdev_ep_names[]) {
+			{ .ep_name = XRT_MD_NODE_FPGA_CONFIG },
+			{ NULL },
+		},
+		.xse_min_ep = 1,
+	},
+	{ 0 },
+};
+
+static struct xrt_subdev_drvdata xrt_icap_data = {
+	.xsd_dev_ops = {
+		.xsd_leaf_call = xrt_icap_leaf_call,
+	},
+};
+
+static const struct platform_device_id xrt_icap_table[] = {
+	{ XRT_ICAP, (kernel_ulong_t)&xrt_icap_data },
+	{ },
+};
+
+static struct platform_driver xrt_icap_driver = {
+	.driver = {
+		.name = XRT_ICAP,
+	},
+	.probe = xrt_icap_probe,
+	.id_table = xrt_icap_table,
+};
+
+XRT_LEAF_INIT_FINI_FUNC(XRT_SUBDEV_ICAP, icap);
-- 
2.27.0


  parent reply	other threads:[~2021-03-24  5:36 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-24  5:29 [PATCH V4 XRT Alveo 00/20] XRT Alveo driver overview Lizhi Hou
2021-03-24  5:29 ` [PATCH V4 XRT Alveo 01/20] Documentation: fpga: Add a document describing XRT Alveo drivers Lizhi Hou
2021-03-27 14:37   ` Tom Rix
2021-03-24  5:29 ` [PATCH V4 XRT Alveo 02/20] fpga: xrt: driver metadata helper functions Lizhi Hou
2021-03-28 15:30   ` Tom Rix
2021-04-06  4:36     ` Lizhi Hou
2021-03-24  5:29 ` [PATCH V4 XRT Alveo 03/20] fpga: xrt: xclbin file " Lizhi Hou
2021-03-29 17:12   ` Tom Rix
2021-04-06 17:52     ` Lizhi Hou
2021-03-24  5:29 ` [PATCH V4 XRT Alveo 04/20] fpga: xrt: xrt-lib platform driver manager Lizhi Hou
2021-03-29 19:44   ` Tom Rix
2021-04-06 20:59     ` Max Zhen
2021-03-24  5:29 ` [PATCH V4 XRT Alveo 05/20] fpga: xrt: group platform driver Lizhi Hou
2021-03-30 12:52   ` Tom Rix
2021-04-06 21:42     ` Max Zhen
2021-03-24  5:29 ` [PATCH V4 XRT Alveo 06/20] fpga: xrt: char dev node helper functions Lizhi Hou
2021-03-30 13:45   ` Tom Rix
2021-04-06 16:29     ` Max Zhen
2021-03-24  5:29 ` [PATCH V4 XRT Alveo 07/20] fpga: xrt: root driver infrastructure Lizhi Hou
2021-03-30 15:11   ` Tom Rix
2021-04-05 20:53     ` Max Zhen
2021-03-24  5:29 ` [PATCH V4 XRT Alveo 08/20] fpga: xrt: platform " Lizhi Hou
2021-03-31 12:50   ` Tom Rix
2021-04-08 17:09     ` Max Zhen
2021-03-24  5:29 ` [PATCH V4 XRT Alveo 09/20] fpga: xrt: management physical function driver (root) Lizhi Hou
2021-03-31 13:03   ` Tom Rix
2021-04-09 18:50     ` Max Zhen
2021-04-14 15:40       ` Tom Rix
2021-03-24  5:29 ` [PATCH V4 XRT Alveo 10/20] fpga: xrt: main platform driver for management function device Lizhi Hou
2021-04-01 14:07   ` Tom Rix
2021-04-07 22:37     ` Lizhi Hou
2021-03-24  5:29 ` [PATCH V4 XRT Alveo 11/20] fpga: xrt: fpga-mgr and region implementation for xclbin download Lizhi Hou
2021-04-01 14:43   ` Tom Rix
2021-04-07 22:41     ` Lizhi Hou
2021-03-24  5:29 ` [PATCH V4 XRT Alveo 12/20] fpga: xrt: VSEC platform driver Lizhi Hou
2021-04-02 14:12   ` Tom Rix
2021-04-06 21:01     ` Lizhi Hou
2021-03-24  5:29 ` [PATCH V4 XRT Alveo 13/20] fpga: xrt: User Clock Subsystem " Lizhi Hou
2021-04-02 14:27   ` Tom Rix
2021-03-24  5:29 ` Lizhi Hou [this message]
2021-04-06 13:50   ` [PATCH V4 XRT Alveo 14/20] fpga: xrt: ICAP " Tom Rix
2021-04-06 23:00     ` Lizhi Hou
2021-03-24  5:29 ` [PATCH V4 XRT Alveo 15/20] fpga: xrt: devctl " Lizhi Hou
2021-04-06 14:18   ` Tom Rix
2021-03-24  5:29 ` [PATCH V4 XRT Alveo 16/20] fpga: xrt: clock " Lizhi Hou
2021-04-06 20:11   ` Tom Rix
2021-03-24  5:29 ` [PATCH V4 XRT Alveo 17/20] fpga: xrt: clock frequency counter " Lizhi Hou
2021-04-06 20:32   ` Tom Rix
2021-03-24  5:29 ` [PATCH V4 XRT Alveo 18/20] fpga: xrt: DDR calibration " Lizhi Hou
2021-04-06 20:37   ` Tom Rix
2021-03-24  5:29 ` [PATCH V4 XRT Alveo 19/20] fpga: xrt: partition isolation " Lizhi Hou
2021-04-06 20:46   ` Tom Rix
2021-03-24  5:29 ` [PATCH V4 XRT Alveo 20/20] fpga: xrt: Kconfig and Makefile updates for XRT drivers Lizhi Hou
2021-04-06 21:00   ` Tom Rix
2021-04-06 23:39     ` Lizhi Hou

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210324052947.27889-15-lizhi.hou@xilinx.com \
    --to=lizhi.hou@xilinx.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-fpga@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=max.zhen@xilinx.com \
    --cc=maxz@xilinx.com \
    --cc=mdf@kernel.org \
    --cc=michal.simek@xilinx.com \
    --cc=robh@kernel.org \
    --cc=sonal.santan@xilinx.com \
    --cc=stefanos@xilinx.com \
    --cc=trix@redhat.com \
    --cc=yliu@xilinx.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).