linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Brad Larson <brad@pensando.io>
To: linux-arm-kernel@lists.infradead.org
Cc: arnd@arndb.de, linus.walleij@linaro.org,
	bgolaszewski@baylibre.com, broonie@kernel.org,
	fancer.lancer@gmail.com, adrian.hunter@intel.com,
	ulf.hansson@linaro.org, olof@lixom.net, brad@pensando.io,
	linux-gpio@vger.kernel.org, linux-spi@vger.kernel.org,
	linux-mmc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2 01/13] gpio: Add Elba SoC gpio driver for spi cs control
Date: Sun, 28 Mar 2021 18:59:26 -0700	[thread overview]
Message-ID: <20210329015938.20316-2-brad@pensando.io> (raw)
In-Reply-To: <20210329015938.20316-1-brad@pensando.io>

This GPIO driver is for the Pensando Elba SoC which
provides control of four chip selects on two SPI busses.

Signed-off-by: Brad Larson <brad@pensando.io>
---
 drivers/gpio/Kconfig           |   6 ++
 drivers/gpio/Makefile          |   1 +
 drivers/gpio/gpio-elba-spics.c | 114 +++++++++++++++++++++++++++++++++
 3 files changed, 121 insertions(+)
 create mode 100644 drivers/gpio/gpio-elba-spics.c

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index e3607ec4c2e8..4720459b24f5 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -241,6 +241,12 @@ config GPIO_EIC_SPRD
 	help
 	  Say yes here to support Spreadtrum EIC device.
 
+config GPIO_ELBA_SPICS
+	bool "Pensando Elba SPI chip-select"
+	depends on (ARCH_PENSANDO_ELBA_SOC || COMPILE_TEST)
+	help
+	  Say yes here to support the Penasndo Elba SoC SPI chip-select driver
+
 config GPIO_EM
 	tristate "Emma Mobile GPIO"
 	depends on (ARCH_EMEV2 || COMPILE_TEST) && OF_GPIO
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index c58a90a3c3b1..c5c7acad371b 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -54,6 +54,7 @@ obj-$(CONFIG_GPIO_DAVINCI)		+= gpio-davinci.o
 obj-$(CONFIG_GPIO_DLN2)			+= gpio-dln2.o
 obj-$(CONFIG_GPIO_DWAPB)		+= gpio-dwapb.o
 obj-$(CONFIG_GPIO_EIC_SPRD)		+= gpio-eic-sprd.o
+obj-$(CONFIG_GPIO_ELBA_SPICS)		+= gpio-elba-spics.o
 obj-$(CONFIG_GPIO_EM)			+= gpio-em.o
 obj-$(CONFIG_GPIO_EP93XX)		+= gpio-ep93xx.o
 obj-$(CONFIG_GPIO_EXAR)			+= gpio-exar.o
diff --git a/drivers/gpio/gpio-elba-spics.c b/drivers/gpio/gpio-elba-spics.c
new file mode 100644
index 000000000000..351bbaeea033
--- /dev/null
+++ b/drivers/gpio/gpio-elba-spics.c
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Pensando Elba SoC SPI chip select driver
+ *
+ * Copyright (c) 2020-2021, Pensando Systems Inc.
+ */
+
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/init.h>
+//#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+/*
+ * pin:	     3		  2	   |	   1		0
+ * bit:	 7------6------5------4----|---3------2------1------0
+ *	cs1  cs1_ovr  cs0  cs0_ovr |  cs1  cs1_ovr  cs0	 cs0_ovr
+ *		   ssi1		   |		 ssi0
+ */
+#define SPICS_PIN_SHIFT(pin)	(2 * (pin))
+#define SPICS_MASK(pin)		(0x3 << SPICS_PIN_SHIFT(pin))
+#define SPICS_SET(pin, val)	((((val) << 1) | 0x1) << SPICS_PIN_SHIFT(pin))
+
+struct elba_spics_priv {
+	void __iomem *base;
+	spinlock_t lock;
+	struct gpio_chip chip;
+};
+
+static int elba_spics_get_value(struct gpio_chip *chip, unsigned int pin)
+{
+	return -ENOTSUPP;
+}
+
+static void elba_spics_set_value(struct gpio_chip *chip,
+		unsigned int pin, int value)
+{
+	struct elba_spics_priv *p = gpiochip_get_data(chip);
+	unsigned long flags;
+	u32 tmp;
+
+	/* select chip select from register */
+	spin_lock_irqsave(&p->lock, flags);
+	tmp = readl_relaxed(p->base);
+	tmp = (tmp & ~SPICS_MASK(pin)) | SPICS_SET(pin, value);
+	writel_relaxed(tmp, p->base);
+	spin_unlock_irqrestore(&p->lock, flags);
+}
+
+static int elba_spics_direction_input(struct gpio_chip *chip, unsigned int pin)
+{
+	return -ENOTSUPP;
+}
+
+static int elba_spics_direction_output(struct gpio_chip *chip,
+		unsigned int pin, int value)
+{
+	elba_spics_set_value(chip, pin, value);
+	return 0;
+}
+
+static int elba_spics_probe(struct platform_device *pdev)
+{
+	struct elba_spics_priv *p;
+	struct resource *res;
+	int ret = 0;
+
+	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
+	if (!p)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	p->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(p->base))
+		return PTR_ERR(p->base);
+	spin_lock_init(&p->lock);
+	platform_set_drvdata(pdev, p);
+
+	p->chip.ngpio = 4;	/* 2 cs pins for spi0, and 2 for spi1 */
+	p->chip.base = -1;
+	p->chip.direction_input = elba_spics_direction_input;
+	p->chip.direction_output = elba_spics_direction_output;
+	p->chip.get = elba_spics_get_value;
+	p->chip.set = elba_spics_set_value;
+	p->chip.label = dev_name(&pdev->dev);
+	p->chip.parent = &pdev->dev;
+	p->chip.owner = THIS_MODULE;
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &p->chip, p);
+	if (ret)
+		dev_err(&pdev->dev, "unable to add gpio chip\n");
+	return ret;
+}
+
+static const struct of_device_id elba_spics_of_match[] = {
+	{ .compatible = "pensando,elba-spics" },
+	{}
+};
+
+static struct platform_driver elba_spics_driver = {
+	.probe = elba_spics_probe,
+	.driver = {
+		.name = "pensando-elba-spics",
+		.of_match_table = elba_spics_of_match,
+	},
+};
+module_platform_driver(elba_spics_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Pensando Elba SoC SPI chip-select driver");
-- 
2.17.1


  reply	other threads:[~2021-03-29  2:00 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-29  1:59 [PATCH v2 00/13] Support Pensando Elba SoC Brad Larson
2021-03-29  1:59 ` Brad Larson [this message]
2021-03-29 10:41   ` [PATCH v2 01/13] gpio: Add Elba SoC gpio driver for spi cs control Andy Shevchenko
2021-08-23  1:22     ` Brad Larson
2021-03-29 13:46   ` Linus Walleij
2021-03-31 18:10   ` Serge Semin
2021-08-23  1:24     ` Brad Larson
2021-03-29  1:59 ` [PATCH v2 02/13] spi: cadence-quadspi: Add QSPI support for Pensando Elba SoC Brad Larson
2021-03-30 11:13   ` Pratyush Yadav
2021-03-29  1:59 ` [PATCH v2 03/13] spi: dw: Add support for Pensando Elba SoC SPI Brad Larson
2021-03-29 10:43   ` Andy Shevchenko
2021-08-23  1:25     ` Brad Larson
2021-03-29 15:58   ` Mark Brown
2021-03-30  2:28     ` Brad Larson
2021-03-31 18:00   ` Serge Semin
2021-08-23  1:26     ` Brad Larson
2021-03-29  1:59 ` [PATCH v2 04/13] spidev: Add Pensando CPLD compatible Brad Larson
2021-03-29 10:44   ` Andy Shevchenko
2021-03-30  3:27     ` Brad Larson
2021-03-29  1:59 ` [PATCH v2 05/13] mmc: sdhci-cadence: Add Pensando Elba SoC support Brad Larson
2021-03-30 10:30   ` Ulf Hansson
2021-04-09  8:24     ` Masahiro Yamada
2021-08-23  1:31       ` Brad Larson
2021-08-23  1:28     ` Brad Larson
2021-03-29  1:59 ` [PATCH v2 06/13] arm64: Add config for Pensando SoC platforms Brad Larson
2021-03-29  1:59 ` [PATCH v2 07/13] arm64: dts: Add Pensando Elba SoC support Brad Larson
2021-03-30 21:55   ` Rob Herring
2021-08-23  1:36     ` Brad Larson
2021-03-31 17:51   ` Serge Semin
2021-08-23  1:55     ` Brad Larson
2021-03-29  1:59 ` [PATCH v2 08/13] dt-bindings: Add pensando vendor prefix Brad Larson
2021-03-30 21:56   ` Rob Herring
2021-03-29  1:59 ` [PATCH v2 09/13] dt-bindings: mmc: Add Pensando Elba SoC binding Brad Larson
2021-03-30 21:56   ` Rob Herring
2021-03-29  1:59 ` [PATCH v2 10/13] dt-bindings: spi: cadence-qspi: Add support for Pensando Elba SoC Brad Larson
2021-03-29 16:00   ` Mark Brown
2021-03-30  2:12     ` Brad Larson
2021-03-30 11:12   ` Pratyush Yadav
2021-08-23  1:57     ` Brad Larson
2021-03-29  1:59 ` [PATCH v2 11/13] dt-bindings: gpio: Add Pensando Elba SoC support Brad Larson
2021-03-29  1:59 ` [PATCH v2 12/13] MAINTAINERS: Add entry for PENSANDO Brad Larson
2021-03-29  1:59 ` [PATCH v2 13/13] gpio: Use linux/gpio/driver.h Brad Larson
2021-03-29  6:48   ` Greg KH
2021-03-30  2:20     ` Brad Larson
2021-03-29 13:44   ` Linus Walleij
2021-03-30  2:21     ` Brad Larson
2021-03-31 16:17 ` [PATCH v2 00/13] Support Pensando Elba SoC Serge Semin
2021-08-23  1:18   ` Brad Larson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210329015938.20316-2-brad@pensando.io \
    --to=brad@pensando.io \
    --cc=adrian.hunter@intel.com \
    --cc=arnd@arndb.de \
    --cc=bgolaszewski@baylibre.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=fancer.lancer@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=olof@lixom.net \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).