linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Aditya Srivastava <yashsri421@gmail.com>
To: balbi@kernel.org
Cc: yashsri421@gmail.com, lukas.bulwahn@gmail.com,
	gregkh@linuxfoundation.org, rdunlap@infradead.org,
	linux-kernel-mentees@lists.linuxfoundation.org,
	linux-doc@vger.kernel.org, linux-usb@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] usb: dwc3: fix incorrect kernel-doc comment syntax in files
Date: Mon, 29 Mar 2021 19:21:08 +0530	[thread overview]
Message-ID: <20210329135108.27128-1-yashsri421@gmail.com> (raw)

The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
There are certain files in drivers/usb/dwc3, which follow this syntax,
but the content inside does not comply with kernel-doc.
Such lines were probably not meant for kernel-doc parsing, but are parsed
due to the presence of kernel-doc like comment syntax(i.e, '/**'), which
causes unexpected warnings from kernel-doc.

E.g., presence of kernel-doc like comment in drivers/usb/dwc3/io.h at
header causes this warnings by kernel-doc:
"warning: expecting prototype for h(). Prototype was for __DRIVERS_USB_DWC3_IO_H() instead"

Similarly for other files too.

Provide a simple fix by replacing such occurrences with general comment
format, i.e. '/*', to prevent kernel-doc from parsing it.

Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
---
* Applies perfectly on next-20210326

 drivers/usb/dwc3/debug.h         | 2 +-
 drivers/usb/dwc3/debugfs.c       | 2 +-
 drivers/usb/dwc3/dwc3-keystone.c | 2 +-
 drivers/usb/dwc3/dwc3-pci.c      | 2 +-
 drivers/usb/dwc3/io.h            | 2 +-
 drivers/usb/dwc3/trace.c         | 2 +-
 drivers/usb/dwc3/trace.h         | 2 +-
 7 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h
index 8ab394942360..db231de46bb3 100644
--- a/drivers/usb/dwc3/debug.h
+++ b/drivers/usb/dwc3/debug.h
@@ -1,5 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0 */
-/**
+/*
  * debug.h - DesignWare USB3 DRD Controller Debug Header
  *
  * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com
diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c
index 5da4f6082d93..b0e3f434d219 100644
--- a/drivers/usb/dwc3/debugfs.c
+++ b/drivers/usb/dwc3/debugfs.c
@@ -1,5 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
-/**
+/*
  * debugfs.c - DesignWare USB3 DRD Controller DebugFS file
  *
  * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com
diff --git a/drivers/usb/dwc3/dwc3-keystone.c b/drivers/usb/dwc3/dwc3-keystone.c
index 057056c0975e..1317959294e6 100644
--- a/drivers/usb/dwc3/dwc3-keystone.c
+++ b/drivers/usb/dwc3/dwc3-keystone.c
@@ -1,5 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
-/**
+/*
  * dwc3-keystone.c - Keystone Specific Glue layer
  *
  * Copyright (C) 2010-2013 Texas Instruments Incorporated - https://www.ti.com
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 4c5c6972124a..4698c43af5ae 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -1,5 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
-/**
+/*
  * dwc3-pci.c - PCI Specific glue layer
  *
  * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com
diff --git a/drivers/usb/dwc3/io.h b/drivers/usb/dwc3/io.h
index 76b73b116862..1e96ea339d48 100644
--- a/drivers/usb/dwc3/io.h
+++ b/drivers/usb/dwc3/io.h
@@ -1,5 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0 */
-/**
+/*
  * io.h - DesignWare USB3 DRD IO Header
  *
  * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com
diff --git a/drivers/usb/dwc3/trace.c b/drivers/usb/dwc3/trace.c
index 1b45a9723eeb..088995885678 100644
--- a/drivers/usb/dwc3/trace.c
+++ b/drivers/usb/dwc3/trace.c
@@ -1,5 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
-/**
+/*
  * trace.c - DesignWare USB3 DRD Controller Trace Support
  *
  * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com
diff --git a/drivers/usb/dwc3/trace.h b/drivers/usb/dwc3/trace.h
index 97f4f1125a41..60883268adfc 100644
--- a/drivers/usb/dwc3/trace.h
+++ b/drivers/usb/dwc3/trace.h
@@ -1,5 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0 */
-/**
+/*
  * trace.h - DesignWare USB3 DRD Controller Trace Support
  *
  * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com
-- 
2.17.1


             reply	other threads:[~2021-03-29 13:51 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-29 13:51 Aditya Srivastava [this message]
2021-03-29 18:18 ` [PATCH] usb: dwc3: fix incorrect kernel-doc comment syntax in files Randy Dunlap

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210329135108.27128-1-yashsri421@gmail.com \
    --to=yashsri421@gmail.com \
    --cc=balbi@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel-mentees@lists.linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=lukas.bulwahn@gmail.com \
    --cc=rdunlap@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).