Hello Clemens,

On Mon, Mar 29, 2021 at 02:57:02PM +0200, Clemens Gruber wrote:
> The hardware readout may return slightly different values than those
> that were set in apply due to the limited range of possible prescale and
> counter register values.

This is fine and for most hardware that's not preventable. My
requirement here is that 

	.get_state(pwm, &state);
	.apply_state(pwm, &state);

doesn't yield any changes.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |