linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: ira.weiny@intel.com
To: Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
	Andy Lutomirski <luto@kernel.org>,
	Peter Zijlstra <peterz@infradead.org>
Cc: Ira Weiny <ira.weiny@intel.com>,
	Dan Williams <dan.j.williams@intel.com>,
	Fenghua Yu <fenghua.yu@intel.com>,
	Dave Hansen <dave.hansen@linux.intel.com>,
	x86@kernel.org, linux-kernel@vger.kernel.org,
	linux-doc@vger.kernel.org, linux-kselftest@vger.kernel.org
Subject: [PATCH V5 07/10] x86/pks: Preserve the PKRS MSR on context switch
Date: Wed, 31 Mar 2021 12:14:02 -0700	[thread overview]
Message-ID: <20210331191405.341999-8-ira.weiny@intel.com> (raw)
In-Reply-To: <20210331191405.341999-1-ira.weiny@intel.com>

From: Ira Weiny <ira.weiny@intel.com>

The PKRS MSR is defined as a per-logical-processor register.  This
isolates memory access by logical CPU.  Unfortunately, the MSR is not
managed by XSAVE.  Therefore, tasks must save/restore the MSR value on
context switch.

Define a saved PKRS value in the task struct, as well as a cached
per-logical-processor MSR value which mirrors the MSR value of the
current CPU.  Initialize all tasks with the default MSR value.  Then, on
schedule in, call write_pkrs() which automatically avoids the overhead
of the MSR write if possible.

Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>

---
Changes from V4
	From kernel test robot <lkp@intel.com>
		Fix i386 build: pks_init_task not found
	Move MSR_IA32_PKRS and INIT_PKRS_VALUE to patch 5 where they are
		'used'.  (Technically nothing is used until the final
		test patch but this organization makes review better.)
	Fix checkpatch errors

Changes from V3
	From Dan Williams
		make pks_init_task() and pks_sched_in() macros
		To avoid Supervisor PKey '#ifdefery' in process.c and
		process_64.c
	Split write_pkrs() to an earlier patch to be used in setup_pks()
		Move Peter's authorship to that patch.
	From Dan Williams
		Use ARCH_ENABLE_SUPERVISOR_PKEYS
	Remove kernel doc comment from write_pkrs
	From Thomas Gleixner
		Fix where pks_sched_in() is called from.
			Should be called from __switch_to()
			NOTE: PKS requires x86_64 so there is no need to
			update process_32.c
		Make pkrs_cache static
		Remove unnecessary pkrs_cache declaration
		Clean up formatting

Changes from V2
	Adjust for PKS enable being final patch.

Changes from V1
	Rebase to latest tip/master
		Resolve conflicts with INIT_THREAD changes

Changes since RFC V3
	Per Dave Hansen
		Update commit message
		move saved_pkrs to be in a nicer place
	Per Peter Zijlstra
		Add Comment from Peter
		Clean up white space
		Update authorship
---
 arch/x86/include/asm/processor.h | 47 +++++++++++++++++++++++++++++++-
 arch/x86/kernel/process.c        |  3 ++
 arch/x86/kernel/process_64.c     |  2 ++
 3 files changed, 51 insertions(+), 1 deletion(-)

diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index dc6d149bf851..e0ffb9c849c5 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -18,6 +18,7 @@ struct vm86;
 #include <asm/cpufeatures.h>
 #include <asm/page.h>
 #include <asm/pgtable_types.h>
+#include <asm/pkeys_common.h>
 #include <asm/percpu.h>
 #include <asm/msr.h>
 #include <asm/desc_defs.h>
@@ -519,6 +520,12 @@ struct thread_struct {
 	unsigned long		cr2;
 	unsigned long		trap_nr;
 	unsigned long		error_code;
+
+#ifdef	CONFIG_ARCH_ENABLE_SUPERVISOR_PKEYS
+	/* Saved Protection key register for supervisor mappings */
+	u32			saved_pkrs;
+#endif
+
 #ifdef CONFIG_VM86
 	/* Virtual 86 mode info */
 	struct vm86		*vm86;
@@ -775,6 +782,37 @@ static inline void spin_lock_prefetch(const void *x)
 	((struct pt_regs *)__ptr) - 1;					\
 })
 
+#ifdef CONFIG_ARCH_ENABLE_SUPERVISOR_PKEYS
+
+void write_pkrs(u32 new_pkrs);
+
+/*
+ * Define pks_init_task and pks_sched_in as macros to avoid requiring the
+ * definition of struct task_struct in this header while keeping the supervisor
+ * pkey #ifdefery out of process.c and process_64.c
+ */
+
+/*
+ * New tasks get the most restrictive PKRS value.
+ */
+#define pks_init_task(tsk) \
+	tsk->thread.saved_pkrs = INIT_PKRS_VALUE
+
+/*
+ * PKRS is only temporarily changed during specific code paths.  Only a
+ * preemption during these windows away from the default value would
+ * require updating the MSR.  write_pkrs() handles this optimization.
+ */
+#define pks_sched_in() \
+	write_pkrs(current->thread.saved_pkrs)
+
+#else /* !CONFIG_ARCH_ENABLE_SUPERVISOR_PKEYS */
+
+#define pks_init_task(tsk)
+#define pks_sched_in()
+
+#endif /* CONFIG_ARCH_ENABLE_SUPERVISOR_PKEYS */
+
 #ifdef CONFIG_X86_32
 #define INIT_THREAD  {							  \
 	.sp0			= TOP_OF_INIT_STACK,			  \
@@ -784,7 +822,14 @@ static inline void spin_lock_prefetch(const void *x)
 #define KSTK_ESP(task)		(task_pt_regs(task)->sp)
 
 #else
-#define INIT_THREAD { }
+
+#ifdef CONFIG_ARCH_ENABLE_SUPERVISOR_PKEYS
+#define INIT_THREAD  {						\
+	.saved_pkrs = INIT_PKRS_VALUE,				\
+}
+#else
+#define INIT_THREAD  { }
+#endif
 
 extern unsigned long KSTK_ESP(struct task_struct *task);
 
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 9c214d7085a4..89f8454a8541 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -43,6 +43,7 @@
 #include <asm/io_bitmap.h>
 #include <asm/proto.h>
 #include <asm/frame.h>
+#include <asm/processor.h>
 
 #include "process.h"
 
@@ -195,6 +196,8 @@ void flush_thread(void)
 	memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));
 
 	fpu__clear_all(&tsk->thread.fpu);
+
+	pks_init_task(tsk);
 }
 
 void disable_TSC(void)
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index d08307df69ad..e590ecac1650 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -632,6 +632,8 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	/* Load the Intel cache allocation PQR MSR. */
 	resctrl_sched_in();
 
+	pks_sched_in();
+
 	return prev_p;
 }
 
-- 
2.28.0.rc0.12.gb6a658bd00c9


  parent reply	other threads:[~2021-03-31 19:15 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-31 19:13 [PATCH V5 00/10] PKS: Add Protection Key Supervisor support ira.weiny
2021-03-31 19:13 ` [PATCH V5 01/10] x86/pkeys: Create pkeys_common.h ira.weiny
2021-03-31 19:13 ` [PATCH V5 02/10] x86/fpu: Refactor arch_set_user_pkey_access() for PKS support ira.weiny
2021-03-31 19:13 ` [PATCH V5 03/10] x86/pks: Add additional PKEY helper macros ira.weiny
2021-03-31 19:13 ` [PATCH V5 04/10] x86/pks: Add PKS defines and Kconfig options ira.weiny
2021-03-31 19:14 ` [PATCH V5 05/10] x86/pks: Add PKS setup code ira.weiny
2021-03-31 19:14 ` [PATCH V5 06/10] x86/fault: Adjust WARN_ON for PKey fault ira.weiny
2021-03-31 19:14 ` ira.weiny [this message]
2021-03-31 19:14 ` [PATCH V5 08/10] x86/entry: Preserve PKRS MSR across exceptions ira.weiny
2021-03-31 19:31   ` Dave Hansen
2021-04-01  1:15     ` Ira Weiny
2021-03-31 19:14 ` [PATCH V5 09/10] x86/pks: Add PKS kernel API ira.weiny
2021-03-31 19:14 ` [PATCH V5 10/10] x86/pks: Add PKS test code ira.weiny

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210331191405.341999-8-ira.weiny@intel.com \
    --to=ira.weiny@intel.com \
    --cc=bp@alien8.de \
    --cc=dan.j.williams@intel.com \
    --cc=dave.hansen@linux.intel.com \
    --cc=fenghua.yu@intel.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=luto@kernel.org \
    --cc=mingo@redhat.com \
    --cc=peterz@infradead.org \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).