linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v10] arm64: dts: imx8qxp: Add jpeg encoder/decoder nodes
@ 2021-04-06 17:27 Mirela Rabulea (OSS)
  2021-04-21 10:12 ` Aisheng Dong
  0 siblings, 1 reply; 3+ messages in thread
From: Mirela Rabulea (OSS) @ 2021-04-06 17:27 UTC (permalink / raw)
  To: robh+dt, shawnguo, aisheng.dong, guoniu.zhou
  Cc: peng.fan, s.hauer, linux-imx, devicetree, mchehab,
	hverkuil-cisco, linux-media, linux-kernel, paul.kocialkowski,
	daniel.baluta, robert.chiras, laurentiu.palcu, p.zabel, ezequiel,
	Mirela Rabulea

From: Mirela Rabulea <mirela.rabulea@nxp.com>

Add dts for imaging subsytem, include jpeg nodes here.
Tested on imx8qxp only, should work on imx8qm, but it was not tested.

Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
---
This was patch #7 in the initial patch set that added mxc-jpeg driver

Changes in v10:
  Addressed feedback from Aisheng Dong:
    -Add jpeg clocks in the jpeg dts nodes.
    -Adapt to the recent split of the dts into subsystems:
     add the imaging subsystem, and place jpeg nodes there.

 .../arm64/boot/dts/freescale/imx8-ss-img.dtsi | 89 +++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8qxp.dtsi    |  1 +
 2 files changed, 90 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi

diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
new file mode 100644
index 000000000000..1457d219a658
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019-2021 NXP
+ * Zhou Guoniu <guoniu.zhou@nxp.com>
+ */
+img_subsys: bus@58000000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x58000000 0x0 0x58000000 0x1000000>;
+
+	img_ipg_clk: clock-img-ipg {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		clock-output-names = "img_ipg_clk";
+	};
+
+	img_jpeg_dec_clk: clock-controller@585d0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x585d0000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&img_ipg_clk>, <&img_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>,
+				<IMX_LPCG_CLK_4>;
+		clock-output-names = "img_jpeg_dec_clk",
+				     "img_jpeg_dec_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>;
+	};
+
+	img_jpeg_enc_clk: clock-controller@585f0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x585f0000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&img_ipg_clk>, <&img_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>,
+				<IMX_LPCG_CLK_4>;
+		clock-output-names = "img_jpeg_enc_clk",
+				     "img_jpeg_enc_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>;
+	};
+
+	cameradev: camera {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		jpegdec: jpegdec@58400000 {
+			compatible = "nxp,imx8qxp-jpgdec";
+			reg = <0x58400000 0x00050000 >;
+			interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&img_jpeg_dec_clk 0>,
+				 <&img_jpeg_dec_clk 1>;
+			clock-names = "per", "ipg";
+			assigned-clocks = <&img_jpeg_dec_clk 0>,
+					  <&img_jpeg_dec_clk 1>;
+			assigned-clock-rates = <200000000>;
+			power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>,
+					<&pd IMX_SC_R_MJPEG_DEC_S0>,
+					<&pd IMX_SC_R_MJPEG_DEC_S1>,
+					<&pd IMX_SC_R_MJPEG_DEC_S2>,
+					<&pd IMX_SC_R_MJPEG_DEC_S3>;
+		};
+
+		jpegenc: jpegenc@58450000 {
+			compatible = "nxp,imx8qxp-jpgenc";
+			reg = <0x58450000 0x00050000 >;
+			interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&img_jpeg_enc_clk 0>,
+				 <&img_jpeg_enc_clk 1>;
+			clock-names = "per", "ipg";
+			assigned-clocks = <&img_jpeg_enc_clk 0>,
+					  <&img_jpeg_enc_clk 1>;
+			assigned-clock-rates = <200000000>;
+			power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>,
+					<&pd IMX_SC_R_MJPEG_ENC_S0>,
+					<&pd IMX_SC_R_MJPEG_ENC_S1>,
+					<&pd IMX_SC_R_MJPEG_ENC_S2>,
+					<&pd IMX_SC_R_MJPEG_ENC_S3>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 1e6b4995091e..2d9589309bd0 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -258,6 +258,7 @@
 	};
 
 	/* sorted in register address */
+	#include "imx8-ss-img.dtsi"
 	#include "imx8-ss-adma.dtsi"
 	#include "imx8-ss-conn.dtsi"
 	#include "imx8-ss-ddr.dtsi"
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 3+ messages in thread

* RE: [PATCH v10] arm64: dts: imx8qxp: Add jpeg encoder/decoder nodes
  2021-04-06 17:27 [PATCH v10] arm64: dts: imx8qxp: Add jpeg encoder/decoder nodes Mirela Rabulea (OSS)
@ 2021-04-21 10:12 ` Aisheng Dong
  2021-04-23 10:13   ` Mirela Rabulea (OSS)
  0 siblings, 1 reply; 3+ messages in thread
From: Aisheng Dong @ 2021-04-21 10:12 UTC (permalink / raw)
  To: Mirela Rabulea (OSS),
	robh+dt, shawnguo, G.n. Zhou,
	moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
  Cc: Peng Fan, s.hauer, dl-linux-imx, devicetree, mchehab,
	hverkuil-cisco, linux-media, linux-kernel, paul.kocialkowski,
	Daniel Baluta, Robert Chiras, Laurentiu Palcu, p.zabel, ezequiel,
	Mirela Rabulea

+ linux-arm-kernel@lists.infradead.org

> From: Mirela Rabulea (OSS) <mirela.rabulea@oss.nxp.com>
> Sent: Wednesday, April 7, 2021 1:28 AM
> 
> Add dts for imaging subsytem, include jpeg nodes here.
> Tested on imx8qxp only, should work on imx8qm, but it was not tested.
> 
> Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
> ---
> This was patch #7 in the initial patch set that added mxc-jpeg driver
> 
> Changes in v10:
>   Addressed feedback from Aisheng Dong:
>     -Add jpeg clocks in the jpeg dts nodes.
>     -Adapt to the recent split of the dts into subsystems:
>      add the imaging subsystem, and place jpeg nodes there.
> 
>  .../arm64/boot/dts/freescale/imx8-ss-img.dtsi | 89 +++++++++++++++++++
>  arch/arm64/boot/dts/freescale/imx8qxp.dtsi    |  1 +
>  2 files changed, 90 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
> b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
> new file mode 100644
> index 000000000000..1457d219a658
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
> @@ -0,0 +1,89 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2019-2021 NXP
> + * Zhou Guoniu <guoniu.zhou@nxp.com>
> + */
> +img_subsys: bus@58000000 {
> +	compatible = "simple-bus";
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +	ranges = <0x58000000 0x0 0x58000000 0x1000000>;
> +
> +	img_ipg_clk: clock-img-ipg {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <200000000>;
> +		clock-output-names = "img_ipg_clk";
> +	};
> +
> +	img_jpeg_dec_clk: clock-controller@585d0000 {

s/clk/lpcg

> +		compatible = "fsl,imx8qxp-lpcg";
> +		reg = <0x585d0000 0x10000>;
> +		#clock-cells = <1>;
> +		clocks = <&img_ipg_clk>, <&img_ipg_clk>;
> +		clock-indices = <IMX_LPCG_CLK_0>,
> +				<IMX_LPCG_CLK_4>;
> +		clock-output-names = "img_jpeg_dec_clk",
> +				     "img_jpeg_dec_ipg_clk";
> +		power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>;
> +	};
> +
> +	img_jpeg_enc_clk: clock-controller@585f0000 {

s/clk/lpcg

> +		compatible = "fsl,imx8qxp-lpcg";
> +		reg = <0x585f0000 0x10000>;
> +		#clock-cells = <1>;
> +		clocks = <&img_ipg_clk>, <&img_ipg_clk>;
> +		clock-indices = <IMX_LPCG_CLK_0>,
> +				<IMX_LPCG_CLK_4>;
> +		clock-output-names = "img_jpeg_enc_clk",
> +				     "img_jpeg_enc_ipg_clk";
> +		power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>;
> +	};
> +
> +	cameradev: camera {

Is this node necessary?

> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +
> +		jpegdec: jpegdec@58400000 {
> +			compatible = "nxp,imx8qxp-jpgdec";

Is this compatible string upstreamed already?

> +			reg = <0x58400000 0x00050000 >;
> +			interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&img_jpeg_dec_clk 0>,
> +				 <&img_jpeg_dec_clk 1>;

Is the index correct here?

> +			clock-names = "per", "ipg";
> +			assigned-clocks = <&img_jpeg_dec_clk 0>,
> +					  <&img_jpeg_dec_clk 1>;
> +			assigned-clock-rates = <200000000>;

Mismatch with assigned-clocks

> +			power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>,
> +					<&pd IMX_SC_R_MJPEG_DEC_S0>,
> +					<&pd IMX_SC_R_MJPEG_DEC_S1>,
> +					<&pd IMX_SC_R_MJPEG_DEC_S2>,
> +					<&pd IMX_SC_R_MJPEG_DEC_S3>;
> +		};
> +
> +		jpegenc: jpegenc@58450000 {
> +			compatible = "nxp,imx8qxp-jpgenc";
> +			reg = <0x58450000 0x00050000 >;
> +			interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&img_jpeg_enc_clk 0>,
> +				 <&img_jpeg_enc_clk 1>;

Ditto

> +			clock-names = "per", "ipg";
> +			assigned-clocks = <&img_jpeg_enc_clk 0>,
> +					  <&img_jpeg_enc_clk 1>;
> +			assigned-clock-rates = <200000000>;

Ditto

> +			power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>,
> +					<&pd IMX_SC_R_MJPEG_ENC_S0>,
> +					<&pd IMX_SC_R_MJPEG_ENC_S1>,
> +					<&pd IMX_SC_R_MJPEG_ENC_S2>,
> +					<&pd IMX_SC_R_MJPEG_ENC_S3>;
> +		};
> +	};
> +};

Regards
Aisheng

> diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> index 1e6b4995091e..2d9589309bd0 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> @@ -258,6 +258,7 @@
>  	};
> 
>  	/* sorted in register address */
> +	#include "imx8-ss-img.dtsi"
>  	#include "imx8-ss-adma.dtsi"
>  	#include "imx8-ss-conn.dtsi"
>  	#include "imx8-ss-ddr.dtsi"
> --
> 2.17.1


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH v10] arm64: dts: imx8qxp: Add jpeg encoder/decoder nodes
  2021-04-21 10:12 ` Aisheng Dong
@ 2021-04-23 10:13   ` Mirela Rabulea (OSS)
  0 siblings, 0 replies; 3+ messages in thread
From: Mirela Rabulea (OSS) @ 2021-04-23 10:13 UTC (permalink / raw)
  To: linux-arm-kernel, shawnguo, robh+dt, Aisheng Dong, G.n. Zhou
  Cc: dl-linux-imx, linux-kernel, Laurentiu Palcu, linux-media,
	devicetree, paul.kocialkowski, mchehab, Robert Chiras, p.zabel,
	Peng Fan, hverkuil-cisco, Daniel Baluta, ezequiel, s.hauer

Hi Aisheng,
thanks for feedback, responses below.

On Wed, 2021-04-21 at 10:12 +0000, Aisheng Dong wrote:
> + linux-arm-kernel@lists.infradead.org
> 
> > From: Mirela Rabulea (OSS) <mirela.rabulea@oss.nxp.com>
> > Sent: Wednesday, April 7, 2021 1:28 AM
> > 
> > Add dts for imaging subsytem, include jpeg nodes here.
> > Tested on imx8qxp only, should work on imx8qm, but it was not
> > tested.
> > 
> > Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
> > ---
> > This was patch #7 in the initial patch set that added mxc-jpeg
> > driver
> > 
> > Changes in v10:
> >   Addressed feedback from Aisheng Dong:
> >     -Add jpeg clocks in the jpeg dts nodes.
> >     -Adapt to the recent split of the dts into subsystems:
> >      add the imaging subsystem, and place jpeg nodes there.
> > 
> >  .../arm64/boot/dts/freescale/imx8-ss-img.dtsi | 89
> > +++++++++++++++++++
> >  arch/arm64/boot/dts/freescale/imx8qxp.dtsi    |  1 +
> >  2 files changed, 90 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
> > 
> > diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
> > new file mode 100644
> > index 000000000000..1457d219a658
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
> > @@ -0,0 +1,89 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright 2019-2021 NXP
> > + * Zhou Guoniu <guoniu.zhou@nxp.com>
> > + */
> > +img_subsys: bus@58000000 {
> > +	compatible = "simple-bus";
> > +	#address-cells = <1>;
> > +	#size-cells = <1>;
> > +	ranges = <0x58000000 0x0 0x58000000 0x1000000>;
> > +
> > +	img_ipg_clk: clock-img-ipg {
> > +		compatible = "fixed-clock";
> > +		#clock-cells = <0>;
> > +		clock-frequency = <200000000>;
> > +		clock-output-names = "img_ipg_clk";
> > +	};
> > +
> > +	img_jpeg_dec_clk: clock-controller@585d0000 {
> 
> s/clk/lpcg

Channged in v11

> 
> > +		compatible = "fsl,imx8qxp-lpcg";
> > +		reg = <0x585d0000 0x10000>;
> > +		#clock-cells = <1>;
> > +		clocks = <&img_ipg_clk>, <&img_ipg_clk>;
> > +		clock-indices = <IMX_LPCG_CLK_0>,
> > +				<IMX_LPCG_CLK_4>;
> > +		clock-output-names = "img_jpeg_dec_clk",
> > +				     "img_jpeg_dec_ipg_clk";
> > +		power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>;
> > +	};
> > +
> > +	img_jpeg_enc_clk: clock-controller@585f0000 {
> 
> s/clk/lpcg

Channged in v11

> 
> > +		compatible = "fsl,imx8qxp-lpcg";
> > +		reg = <0x585f0000 0x10000>;
> > +		#clock-cells = <1>;
> > +		clocks = <&img_ipg_clk>, <&img_ipg_clk>;
> > +		clock-indices = <IMX_LPCG_CLK_0>,
> > +				<IMX_LPCG_CLK_4>;
> > +		clock-output-names = "img_jpeg_enc_clk",
> > +				     "img_jpeg_enc_ipg_clk";
> > +		power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>;
> > +	};
> > +
> > +	cameradev: camera {
> 
> Is this node necessary?

Dropped in v11

> 
> > +		compatible = "simple-bus";
> > +		#address-cells = <1>;
> > +		#size-cells = <1>;
> > +		ranges;
> > +
> > +		jpegdec: jpegdec@58400000 {
> > +			compatible = "nxp,imx8qxp-jpgdec";
> 
> Is this compatible string upstreamed already?

Yes, it's upstreamed.

> 
> > +			reg = <0x58400000 0x00050000 >;
> > +			interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
> > +			clocks = <&img_jpeg_dec_clk 0>,
> > +				 <&img_jpeg_dec_clk 1>;
> 
> Is the index correct here?

Yes, per is for the lower 16 bits (15:0) of LPCG_MJPEG_COMMON_DEC_REGS,
and ipg for the upper 16-bits (31:16) of LPCG_MJPEG_COMMON_DEC_REGS.
The IMX_LPCG_CLK_4 is 16.

> 
> > +			clock-names = "per", "ipg";
> > +			assigned-clocks = <&img_jpeg_dec_clk 0>,
> > +					  <&img_jpeg_dec_clk 1>;
> > +			assigned-clock-rates = <200000000>;
> 
> Mismatch with assigned-clocks

Aligned in v11.

> 
> > +			power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>,
> > +					<&pd IMX_SC_R_MJPEG_DEC_S0>,
> > +					<&pd IMX_SC_R_MJPEG_DEC_S1>,
> > +					<&pd IMX_SC_R_MJPEG_DEC_S2>,
> > +					<&pd IMX_SC_R_MJPEG_DEC_S3>;
> > +		};
> > +
> > +		jpegenc: jpegenc@58450000 {
> > +			compatible = "nxp,imx8qxp-jpgenc";
> > +			reg = <0x58450000 0x00050000 >;
> > +			interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
> > +			clocks = <&img_jpeg_enc_clk 0>,
> > +				 <&img_jpeg_enc_clk 1>;
> 
> Ditto
> 
> > +			clock-names = "per", "ipg";
> > +			assigned-clocks = <&img_jpeg_enc_clk 0>,
> > +					  <&img_jpeg_enc_clk 1>;
> > +			assigned-clock-rates = <200000000>;
> 
> Ditto
> 
> > +			power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>,
> > +					<&pd IMX_SC_R_MJPEG_ENC_S0>,
> > +					<&pd IMX_SC_R_MJPEG_ENC_S1>,
> > +					<&pd IMX_SC_R_MJPEG_ENC_S2>,
> > +					<&pd IMX_SC_R_MJPEG_ENC_S3>;
> > +		};
> > +	};
> > +};
> 
> Regards
> Aisheng
> 
> > diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > index 1e6b4995091e..2d9589309bd0 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > @@ -258,6 +258,7 @@
> >  	};
> > 
> >  	/* sorted in register address */
> > +	#include "imx8-ss-img.dtsi"
> >  	#include "imx8-ss-adma.dtsi"
> >  	#include "imx8-ss-conn.dtsi"
> >  	#include "imx8-ss-ddr.dtsi"
> > --
> > 2.17.1
> 
> 

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2021-04-23 10:13 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-06 17:27 [PATCH v10] arm64: dts: imx8qxp: Add jpeg encoder/decoder nodes Mirela Rabulea (OSS)
2021-04-21 10:12 ` Aisheng Dong
2021-04-23 10:13   ` Mirela Rabulea (OSS)

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).