linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Michael Kao <michael.kao@mediatek.com>
To: <michael.kao@mediatek.com>, <fan.chen@mediatek.com>,
	Zhang Rui <rui.zhang@intel.com>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	<linux-pm@vger.kernel.org>, <srv_heupstream@mediatek.com>
Cc: Eduardo Valentin <edubezval@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Matthias Brugger <matthias.bgg@gmail.com>, <hsinyi@chromium.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>
Subject: [PATCH 1/1] arm64: dts: mt8183-kukui: Enable thermal Tboard
Date: Fri, 9 Apr 2021 15:11:58 +0800	[thread overview]
Message-ID: <20210409071158.2346-1-michael.kao@mediatek.com> (raw)

Add Tboard thermal sensor settings.

pull-up voltage: 1800 mv
pull-up resistor: 75K

Vsense = pull-up voltage * Rntc / ( pull-up resistor + Rntc )
AuxIn = Vsense * 4096 / 1500

TEST=boot kukui
     check /sys/class/thermal/thermal_zone*/type
     check /sys/class/thermal/thermal_zone*/temp

Signed-off-by: Michael Kao <michael.kao@mediatek.com>
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
---
 arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 14 ++++++++++++++
 arch/arm64/boot/dts/mediatek/mt8183.dtsi       |  2 +-
 2 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index bf2ad1294dd3..202acb542b12 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -801,6 +801,20 @@
 	status = "okay";
 };
 
+&thermal_zones {
+	Tboard1 {
+		polling-delay = <1000>; /* milliseconds */
+		polling-delay-passive = <0>; /* milliseconds */
+		thermal-sensors = <&tboard_thermistor1>;
+	};
+
+	Tboard2 {
+		polling-delay = <1000>; /* milliseconds */
+		polling-delay-passive = <0>; /* milliseconds */
+		thermal-sensors = <&tboard_thermistor2>;
+	};
+};
+
 &u3phy {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 1ad0a1d55d53..f0719dbef249 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -673,7 +673,7 @@
 			nvmem-cell-names = "calibration-data";
 		};
 
-		thermal-zones {
+		thermal_zones: thermal-zones {
 			cpu_thermal: cpu_thermal {
 				polling-delay-passive = <100>;
 				polling-delay = <500>;
-- 
2.18.0


             reply	other threads:[~2021-04-09  7:12 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-09  7:11 Michael Kao [this message]
2021-04-09  7:16 ` [PATCH 1/1] arm64: dts: mt8183-kukui: Enable thermal Tboard Hsin-Yi Wang
2021-05-06  5:11   ` Michael Kao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210409071158.2346-1-michael.kao@mediatek.com \
    --to=michael.kao@mediatek.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=edubezval@gmail.com \
    --cc=fan.chen@mediatek.com \
    --cc=hsinyi@chromium.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=matthias.bgg@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=srv_heupstream@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).