linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH RESEND v8 0/7] dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name
@ 2021-04-09 11:30 Serge Semin
  2021-04-09 11:30 ` [PATCH RESEND v8 1/7] arc: dts: Harmonize EHCI/OHCI DT " Serge Semin
                   ` (6 more replies)
  0 siblings, 7 replies; 10+ messages in thread
From: Serge Semin @ 2021-04-09 11:30 UTC (permalink / raw)
  To: Andy Gross, Bjorn Andersson, Felipe Balbi, Michael Ellerman,
	Vladimir Zapolskiy, Alexey Brodkin, Vineet Gupta, Rob Herring,
	Greg Kroah-Hartman, Krzysztof Kozlowski, linux-usb
  Cc: Serge Semin, Serge Semin, Khuong Dinh, Patrice Chotard,
	Benjamin Herrenschmidt, Paul Mackerras, linux-arm-msm,
	linux-arm-kernel, linuxppc-dev, linux-snps-arc, devicetree,
	linux-kernel

As the subject states this series is an attempt to harmonize the xHCI,
EHCI, OHCI and DWC USB3 DT nodes with the DT schema introduced in the
framework of the patchset [1].

Firstly as Krzysztof suggested we've deprecated a support of DWC USB3
controllers with "synopsys,"-vendor prefix compatible string in favor of
the ones with valid "snps,"-prefix. It's done in all the DTS files,
which have been unfortunate to define such nodes.

Secondly we suggest to fix the snps,quirk-frame-length-adjustment property
declaration in the Amlogic meson-g12-common.dtsi DTS file, since it has
been erroneously declared as boolean while having uint32 type. Neil said
it was ok to init that property with 0x20 value.

Thirdly the main part of the patchset concern fixing the xHCI, EHCI/OHCI
and DWC USB3 DT nodes name as in accordance with their DT schema the
corresponding node name is suppose to comply with the Generic USB HCD DT
schema, which requires the USB nodes to have the name acceptable by the
regexp: "^usb(@.*)?". Such requirement had been applicable even before we
introduced the new DT schema in [1], but as we can see it hasn't been
strictly implemented for a lot the DTS files. Since DT schema is now
available the automated DTS validation shall make sure that the rule isn't
violated.

Note most of these patches have been a part of the last three patches of
[1]. But since there is no way to have them merged in in a combined
manner, I had to move them to the dedicated series and split them up so to
be accepted by the corresponding subsystem maintainers one-by-one.

[1] Link: https://lore.kernel.org/linux-usb/20201014101402.18271-1-Sergey.Semin@baikalelectronics.ru/
Changelog v1:
- As Krzysztof suggested I've created a script which checked whether the
  node names had been also updated in all the depended dts files. As a
  result I found two more files which should have been also modified:
  arch/arc/boot/dts/{axc003.dtsi,axc003_idu.dtsi}
- Correct the USB DWC3 nodes name found in
  arch/arm64/boot/dts/apm/{apm-storm.dtsi,apm-shadowcat.dtsi} too.

Link: https://lore.kernel.org/linux-usb/20201020115959.2658-1-Sergey.Semin@baikalelectronics.ru
Changelog v2:
- Drop the patch:
  [PATCH 01/29] usb: dwc3: Discard synopsys,dwc3 compatibility string
  and get back the one which marks the "synopsys,dwc3" compatible string
  as deprecated into the DT schema related series.
- Drop the patches:
  [PATCH 03/29] arm: dts: am437x: Correct DWC USB3 compatible string
  [PATCH 04/29] arm: dts: exynos: Correct DWC USB3 compatible string
  [PATCH 07/29] arm: dts: bcm53x: Harmonize EHCI/OHCI DT nodes name
  [PATCH 08/29] arm: dts: stm32: Harmonize EHCI/OHCI DT nodes name
  [PATCH 16/29] arm: dts: bcm5301x: Harmonize xHCI DT nodes name
  [PATCH 19/29] arm: dts: exynos: Harmonize DWC USB3 DT nodes name
  [PATCH 21/29] arm: dts: ls1021a: Harmonize DWC USB3 DT nodes name
  [PATCH 22/29] arm: dts: omap5: Harmonize DWC USB3 DT nodes name
  [PATCH 24/29] arm64: dts: allwinner: h6: Harmonize DWC USB3 DT nodes name
  [PATCH 26/29] arm64: dts: exynos: Harmonize DWC USB3 DT nodes name
  [PATCH 27/29] arm64: dts: layerscape: Harmonize DWC USB3 DT nodes name
  since they have been applied to the corresponding maintainers repos.
- Fix drivers/usb/dwc3/dwc3-qcom.c to be looking for the "usb@"-prefixed
  sub-node and falling back to the "dwc3@"-prefixed one on failure.

Link: https://lore.kernel.org/linux-usb/20201111091552.15593-1-Sergey.Semin@baikalelectronics.ru
Changelog v3:
- Drop the patches:
  [PATCH v2 04/18] arm: dts: hisi-x5hd2: Harmonize EHCI/OHCI DT nodes name
  [PATCH v2 06/18] arm64: dts: hisi: Harmonize EHCI/OHCI DT nodes name
  [PATCH v2 07/18] mips: dts: jz47x: Harmonize EHCI/OHCI DT nodes name
  [PATCH v2 08/18] mips: dts: sead3: Harmonize EHCI/OHCI DT nodes name
  [PATCH v2 09/18] mips: dts: ralink: mt7628a: Harmonize EHCI/OHCI DT nodes name
  [PATCH v2 11/18] arm64: dts: marvell: cp11x: Harmonize xHCI DT nodes name
  [PATCH v2 12/18] arm: dts: marvell: armada-375: Harmonize DWC USB3 DT nodes name
  [PATCH v2 16/18] arm64: dts: hi3660: Harmonize DWC USB3 DT nodes name
  since they have been applied to the corresponding maintainers repos.

Link: https://lore.kernel.org/linux-usb/20201205155621.3045-1-Sergey.Semin@baikalelectronics.ru
Changelog v4:
- Just resend.

Link: https://lore.kernel.org/linux-usb/20201210091756.18057-1-Sergey.Semin@baikalelectronics.ru/
Changelog v5:
- Drop the patch:
  [PATCH v4 02/10] arm64: dts: amlogic: meson-g12: Set FL-adj property value
  since it has been applied to the corresponding maintainers repos.
- Get back the patch:
  [PATCH 21/29] arm: dts: ls1021a: Harmonize DWC USB3 DT nodes name
  as it has been missing in the kernel 5.11-rc7
- Rebase onto the kernel 5.11-rc7.

Link: https://lore.kernel.org/lkml/20210208135154.6645-1-Sergey.Semin@baikalelectronics.ru/
Changelog v6:
- Just resend and add linux-usb.vger.kernel.org to the list of Ccecipients.

Link: https://lore.kernel.org/linux-usb/20210210172850.20849-1-Sergey.Semin@baikalelectronics.ru
Link: https://lore.kernel.org/linux-usb/20210212205521.14280-1-Sergey.Semin@baikalelectronics.ru
Changelog v7:
- Replace "of_get_child_by_name(np, "usb") ?: of_get_child_by_name(np, "dwc3");"
  pattern with using of_get_compatible_child() method in the Qcom DWC3 driver.
- Drop the patches:
  [PATCH v6 01/10] arm: dts: ls1021a: Harmonize DWC USB3 DT nodes name
  [PATCH v6 02/10] arm: dts: keystone: Correct DWC USB3 compatible string
  [PATCH v6 06/10] arm: dts: keystone: Harmonize DWC USB3 DT nodes name
  since they have been applied to the corresponding maintainers repos.
- Cleanup the list of recipients.
- Rebase onto kernel 5.12-rc4.

Link: https://lore.kernel.org/lkml/20210324204836.29668-1-Sergey.Semin@baikalelectronics.ru/
Changelog v8:
- Just resend.

Cc: Khuong Dinh <khuong@os.amperecomputing.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-snps-arc@lists.infradead.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

Serge Semin (7):
  arc: dts: Harmonize EHCI/OHCI DT nodes name
  arm: dts: lpc18xx: Harmonize EHCI/OHCI DT nodes name
  powerpc: dts: akebono: Harmonize EHCI/OHCI DT nodes name
  arm: dts: stih407-family: Harmonize DWC USB3 DT nodes name
  arm64: dts: apm: Harmonize DWC USB3 DT nodes name
  usb: dwc3: qcom: Detect DWC3 DT-nodes using compatible string
  arm64: dts: qcom: Harmonize DWC USB3 DT nodes name

 arch/arc/boot/dts/axc003.dtsi                | 4 ++--
 arch/arc/boot/dts/axc003_idu.dtsi            | 4 ++--
 arch/arc/boot/dts/axs10x_mb.dtsi             | 4 ++--
 arch/arc/boot/dts/hsdk.dts                   | 4 ++--
 arch/arc/boot/dts/vdk_axs10x_mb.dtsi         | 2 +-
 arch/arm/boot/dts/lpc18xx.dtsi               | 4 ++--
 arch/arm/boot/dts/stih407-family.dtsi        | 2 +-
 arch/arm64/boot/dts/apm/apm-shadowcat.dtsi   | 4 ++--
 arch/arm64/boot/dts/apm/apm-storm.dtsi       | 6 +++---
 arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 4 ++--
 arch/arm64/boot/dts/qcom/ipq8074.dtsi        | 4 ++--
 arch/arm64/boot/dts/qcom/msm8996.dtsi        | 4 ++--
 arch/arm64/boot/dts/qcom/msm8998.dtsi        | 2 +-
 arch/arm64/boot/dts/qcom/qcs404-evb.dtsi     | 2 +-
 arch/arm64/boot/dts/qcom/qcs404.dtsi         | 4 ++--
 arch/arm64/boot/dts/qcom/sc7180.dtsi         | 2 +-
 arch/arm64/boot/dts/qcom/sdm845.dtsi         | 4 ++--
 arch/arm64/boot/dts/qcom/sm8150.dtsi         | 2 +-
 arch/powerpc/boot/dts/akebono.dts            | 6 +++---
 drivers/usb/dwc3/dwc3-qcom.c                 | 2 +-
 20 files changed, 35 insertions(+), 35 deletions(-)

-- 
2.30.1


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH RESEND v8 1/7] arc: dts: Harmonize EHCI/OHCI DT nodes name
  2021-04-09 11:30 [PATCH RESEND v8 0/7] dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name Serge Semin
@ 2021-04-09 11:30 ` Serge Semin
  2021-04-09 11:30 ` [PATCH RESEND v8 2/7] arm: dts: lpc18xx: " Serge Semin
                   ` (5 subsequent siblings)
  6 siblings, 0 replies; 10+ messages in thread
From: Serge Semin @ 2021-04-09 11:30 UTC (permalink / raw)
  To: Andy Gross, Bjorn Andersson, Felipe Balbi, Michael Ellerman,
	Vladimir Zapolskiy, Alexey Brodkin, Vineet Gupta, Rob Herring,
	Greg Kroah-Hartman, Krzysztof Kozlowski, linux-usb
  Cc: Serge Semin, Serge Semin, devicetree, linux-snps-arc, linux-kernel

In accordance with the Generic EHCI/OHCI bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible
nodes are correctly named.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arc/boot/dts/axc003.dtsi        | 4 ++--
 arch/arc/boot/dts/axc003_idu.dtsi    | 4 ++--
 arch/arc/boot/dts/axs10x_mb.dtsi     | 4 ++--
 arch/arc/boot/dts/hsdk.dts           | 4 ++--
 arch/arc/boot/dts/vdk_axs10x_mb.dtsi | 2 +-
 5 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi
index cd1edcf4f95e..3434c8131ecd 100644
--- a/arch/arc/boot/dts/axc003.dtsi
+++ b/arch/arc/boot/dts/axc003.dtsi
@@ -103,11 +103,11 @@ ethernet@18000 {
 			dma-coherent;
 		};
 
-		ehci@40000 {
+		usb@40000 {
 			dma-coherent;
 		};
 
-		ohci@60000 {
+		usb@60000 {
 			dma-coherent;
 		};
 
diff --git a/arch/arc/boot/dts/axc003_idu.dtsi b/arch/arc/boot/dts/axc003_idu.dtsi
index 70779386ca79..67556f4b7057 100644
--- a/arch/arc/boot/dts/axc003_idu.dtsi
+++ b/arch/arc/boot/dts/axc003_idu.dtsi
@@ -110,11 +110,11 @@ ethernet@18000 {
 			dma-coherent;
 		};
 
-		ehci@40000 {
+		usb@40000 {
 			dma-coherent;
 		};
 
-		ohci@60000 {
+		usb@60000 {
 			dma-coherent;
 		};
 
diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi
index 99d3e7175bf7..b64435385304 100644
--- a/arch/arc/boot/dts/axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/axs10x_mb.dtsi
@@ -87,13 +87,13 @@ gmac: ethernet@18000 {
 			mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
 		};
 
-		ehci@40000 {
+		usb@40000 {
 			compatible = "generic-ehci";
 			reg = < 0x40000 0x100 >;
 			interrupts = < 8 >;
 		};
 
-		ohci@60000 {
+		usb@60000 {
 			compatible = "generic-ohci";
 			reg = < 0x60000 0x100 >;
 			interrupts = < 8 >;
diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
index dcaa44e408ac..fdd4f7f635d3 100644
--- a/arch/arc/boot/dts/hsdk.dts
+++ b/arch/arc/boot/dts/hsdk.dts
@@ -234,7 +234,7 @@ phy0: ethernet-phy@0 { /* Micrel KSZ9031 */
 			};
 		};
 
-		ohci@60000 {
+		usb@60000 {
 			compatible = "snps,hsdk-v1.0-ohci", "generic-ohci";
 			reg = <0x60000 0x100>;
 			interrupts = <15>;
@@ -242,7 +242,7 @@ ohci@60000 {
 			dma-coherent;
 		};
 
-		ehci@40000 {
+		usb@40000 {
 			compatible = "snps,hsdk-v1.0-ehci", "generic-ehci";
 			reg = <0x40000 0x100>;
 			interrupts = <15>;
diff --git a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
index cbb179770293..90a412026e64 100644
--- a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
@@ -46,7 +46,7 @@ ethernet@18000 {
 			clock-names = "stmmaceth";
 		};
 
-		ehci@40000 {
+		usb@40000 {
 			compatible = "generic-ehci";
 			reg = < 0x40000 0x100 >;
 			interrupts = < 8 >;
-- 
2.30.1


^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH RESEND v8 2/7] arm: dts: lpc18xx: Harmonize EHCI/OHCI DT nodes name
  2021-04-09 11:30 [PATCH RESEND v8 0/7] dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name Serge Semin
  2021-04-09 11:30 ` [PATCH RESEND v8 1/7] arc: dts: Harmonize EHCI/OHCI DT " Serge Semin
@ 2021-04-09 11:30 ` Serge Semin
  2021-04-09 11:30 ` [PATCH RESEND v8 3/7] powerpc: dts: akebono: " Serge Semin
                   ` (4 subsequent siblings)
  6 siblings, 0 replies; 10+ messages in thread
From: Serge Semin @ 2021-04-09 11:30 UTC (permalink / raw)
  To: Andy Gross, Bjorn Andersson, Felipe Balbi, Michael Ellerman,
	Vladimir Zapolskiy, Alexey Brodkin, Vineet Gupta, Rob Herring,
	Greg Kroah-Hartman, Krzysztof Kozlowski, linux-usb
  Cc: Serge Semin, Serge Semin, devicetree, linux-arm-kernel, linux-kernel

In accordance with the Generic EHCI/OHCI bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible
nodes are correctly named.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/lpc18xx.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi
index 10b8249b8ab6..82ffd7b0ad8a 100644
--- a/arch/arm/boot/dts/lpc18xx.dtsi
+++ b/arch/arm/boot/dts/lpc18xx.dtsi
@@ -121,7 +121,7 @@ mmcsd: mmcsd@40004000 {
 			status = "disabled";
 		};
 
-		usb0: ehci@40006100 {
+		usb0: usb@40006100 {
 			compatible = "nxp,lpc1850-ehci", "generic-ehci";
 			reg = <0x40006100 0x100>;
 			interrupts = <8>;
@@ -133,7 +133,7 @@ usb0: ehci@40006100 {
 			status = "disabled";
 		};
 
-		usb1: ehci@40007100 {
+		usb1: usb@40007100 {
 			compatible = "nxp,lpc1850-ehci", "generic-ehci";
 			reg = <0x40007100 0x100>;
 			interrupts = <9>;
-- 
2.30.1


^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH RESEND v8 3/7] powerpc: dts: akebono: Harmonize EHCI/OHCI DT nodes name
  2021-04-09 11:30 [PATCH RESEND v8 0/7] dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name Serge Semin
  2021-04-09 11:30 ` [PATCH RESEND v8 1/7] arc: dts: Harmonize EHCI/OHCI DT " Serge Semin
  2021-04-09 11:30 ` [PATCH RESEND v8 2/7] arm: dts: lpc18xx: " Serge Semin
@ 2021-04-09 11:30 ` Serge Semin
  2021-04-09 11:30 ` [PATCH RESEND v8 4/7] arm: dts: stih407-family: Harmonize DWC USB3 " Serge Semin
                   ` (3 subsequent siblings)
  6 siblings, 0 replies; 10+ messages in thread
From: Serge Semin @ 2021-04-09 11:30 UTC (permalink / raw)
  To: Andy Gross, Bjorn Andersson, Felipe Balbi, Michael Ellerman,
	Vladimir Zapolskiy, Alexey Brodkin, Vineet Gupta, Rob Herring,
	Greg Kroah-Hartman, Krzysztof Kozlowski, linux-usb,
	Benjamin Herrenschmidt, Paul Mackerras
  Cc: Serge Semin, Serge Semin, devicetree, linuxppc-dev, linux-kernel

In accordance with the Generic EHCI/OHCI bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible
nodes are correctly named.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/powerpc/boot/dts/akebono.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/boot/dts/akebono.dts b/arch/powerpc/boot/dts/akebono.dts
index df18f8dc4642..343326c30380 100644
--- a/arch/powerpc/boot/dts/akebono.dts
+++ b/arch/powerpc/boot/dts/akebono.dts
@@ -126,7 +126,7 @@ SATA0: sata@30000010000 {
 			interrupts = <93 2>;
 		};
 
-		EHCI0: ehci@30010000000 {
+		EHCI0: usb@30010000000 {
 			compatible = "ibm,476gtr-ehci", "generic-ehci";
 			reg = <0x300 0x10000000 0x0 0x10000>;
 			interrupt-parent = <&MPIC>;
@@ -140,14 +140,14 @@ SD0: sd@30000000000 {
 			interrupt-parent = <&MPIC>;
 		};
 
-		OHCI0: ohci@30010010000 {
+		OHCI0: usb@30010010000 {
 			compatible = "ibm,476gtr-ohci", "generic-ohci";
 			reg = <0x300 0x10010000 0x0 0x10000>;
 			interrupt-parent = <&MPIC>;
 			interrupts = <89 1>;
 			};
 
-		OHCI1: ohci@30010020000 {
+		OHCI1: usb@30010020000 {
 			compatible = "ibm,476gtr-ohci", "generic-ohci";
 			reg = <0x300 0x10020000 0x0 0x10000>;
 			interrupt-parent = <&MPIC>;
-- 
2.30.1


^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH RESEND v8 4/7] arm: dts: stih407-family: Harmonize DWC USB3 DT nodes name
  2021-04-09 11:30 [PATCH RESEND v8 0/7] dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name Serge Semin
                   ` (2 preceding siblings ...)
  2021-04-09 11:30 ` [PATCH RESEND v8 3/7] powerpc: dts: akebono: " Serge Semin
@ 2021-04-09 11:30 ` Serge Semin
  2021-04-09 11:30 ` [PATCH RESEND v8 5/7] arm64: dts: apm: " Serge Semin
                   ` (2 subsequent siblings)
  6 siblings, 0 replies; 10+ messages in thread
From: Serge Semin @ 2021-04-09 11:30 UTC (permalink / raw)
  To: Andy Gross, Bjorn Andersson, Felipe Balbi, Michael Ellerman,
	Vladimir Zapolskiy, Alexey Brodkin, Vineet Gupta, Rob Herring,
	Greg Kroah-Hartman, Krzysztof Kozlowski, linux-usb,
	Patrice Chotard
  Cc: Serge Semin, Serge Semin, linux-arm-kernel, devicetree, linux-kernel

In accordance with the DWC USB3 bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
named.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
---
 arch/arm/boot/dts/stih407-family.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 23a1746f3baa..2352f76b5a69 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -681,7 +681,7 @@ st_dwc3: dwc3@8f94000 {
 
 			status = "disabled";
 
-			dwc3: dwc3@9900000 {
+			dwc3: usb@9900000 {
 				compatible	= "snps,dwc3";
 				reg		= <0x09900000 0x100000>;
 				interrupts	= <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.30.1


^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH RESEND v8 5/7] arm64: dts: apm: Harmonize DWC USB3 DT nodes name
  2021-04-09 11:30 [PATCH RESEND v8 0/7] dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name Serge Semin
                   ` (3 preceding siblings ...)
  2021-04-09 11:30 ` [PATCH RESEND v8 4/7] arm: dts: stih407-family: Harmonize DWC USB3 " Serge Semin
@ 2021-04-09 11:30 ` Serge Semin
  2021-04-09 11:30 ` [PATCH RESEND v8 6/7] usb: dwc3: qcom: Detect DWC3 DT-nodes using compatible string Serge Semin
  2021-04-09 11:30 ` [PATCH RESEND v8 7/7] arm64: dts: qcom: Harmonize DWC USB3 DT nodes name Serge Semin
  6 siblings, 0 replies; 10+ messages in thread
From: Serge Semin @ 2021-04-09 11:30 UTC (permalink / raw)
  To: Andy Gross, Bjorn Andersson, Felipe Balbi, Michael Ellerman,
	Vladimir Zapolskiy, Alexey Brodkin, Vineet Gupta, Rob Herring,
	Greg Kroah-Hartman, Krzysztof Kozlowski, linux-usb, Khuong Dinh
  Cc: Serge Semin, Serge Semin, devicetree, linux-kernel

In accordance with the DWC USB3 bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
named despite of the warning comment about possible backward
compatibility issues.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm64/boot/dts/apm/apm-shadowcat.dtsi | 4 ++--
 arch/arm64/boot/dts/apm/apm-storm.dtsi     | 6 +++---
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
index a83c82c50e29..832dd85b00bd 100644
--- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
@@ -597,8 +597,8 @@ serial0: serial@10600000 {
 			interrupts = <0x0 0x4c 0x4>;
 		};
 
-		/* Do not change dwusb name, coded for backward compatibility */
-		usb0: dwusb@19000000 {
+		/* Node-name might need to be coded as dwusb for backward compatibility */
+		usb0: usb@19000000 {
 			status = "disabled";
 			compatible = "snps,dwc3";
 			reg =  <0x0 0x19000000 0x0 0x100000>;
diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi
index 0f37e77f5459..1520a945b7f9 100644
--- a/arch/arm64/boot/dts/apm/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi
@@ -923,8 +923,8 @@ sata3: sata@1a800000 {
 			phy-names = "sata-phy";
 		};
 
-		/* Do not change dwusb name, coded for backward compatibility */
-		usb0: dwusb@19000000 {
+		/* Node-name might need to be coded as dwusb for backward compatibility */
+		usb0: usb@19000000 {
 			status = "disabled";
 			compatible = "snps,dwc3";
 			reg =  <0x0 0x19000000 0x0 0x100000>;
@@ -933,7 +933,7 @@ usb0: dwusb@19000000 {
 			dr_mode = "host";
 		};
 
-		usb1: dwusb@19800000 {
+		usb1: usb@19800000 {
 			status = "disabled";
 			compatible = "snps,dwc3";
 			reg =  <0x0 0x19800000 0x0 0x100000>;
-- 
2.30.1


^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH RESEND v8 6/7] usb: dwc3: qcom: Detect DWC3 DT-nodes using compatible string
  2021-04-09 11:30 [PATCH RESEND v8 0/7] dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name Serge Semin
                   ` (4 preceding siblings ...)
  2021-04-09 11:30 ` [PATCH RESEND v8 5/7] arm64: dts: apm: " Serge Semin
@ 2021-04-09 11:30 ` Serge Semin
  2021-04-09 14:05   ` Bjorn Andersson
  2021-04-09 11:30 ` [PATCH RESEND v8 7/7] arm64: dts: qcom: Harmonize DWC USB3 DT nodes name Serge Semin
  6 siblings, 1 reply; 10+ messages in thread
From: Serge Semin @ 2021-04-09 11:30 UTC (permalink / raw)
  To: Andy Gross, Bjorn Andersson, Felipe Balbi, Michael Ellerman,
	Vladimir Zapolskiy, Alexey Brodkin, Vineet Gupta, Rob Herring,
	Greg Kroah-Hartman, Krzysztof Kozlowski, linux-usb
  Cc: Serge Semin, Serge Semin, linux-arm-msm, linux-kernel

In accordance with the USB HCD/DRD schema all the USB controllers are
supposed to have DT-nodes named with prefix "^usb(@.*)?". Since the
existing DT-nodes will be renamed in a subsequent patch let's fix the DWC3
Qcom-specific code to detect the DWC3 sub-node just by checking its
compatible string to match the "snps,dwc3". The semantic of the code
won't change seeing all the DWC USB3 nodes are supposed to have the
compatible property with any of those strings set.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>

---

Changelog v7:
- Replace "of_get_child_by_name(np, "usb") ?: of_get_child_by_name(np, "dwc3");"
  pattern with using of_get_compatible_child() method.
- Discard Bjorn Andersson Reviewed-by tag since the patch content
  has been changed.
---
 drivers/usb/dwc3/dwc3-qcom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index fcaf04483ad0..617a1be88371 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -644,7 +644,7 @@ static int dwc3_qcom_of_register_core(struct platform_device *pdev)
 	struct device		*dev = &pdev->dev;
 	int			ret;
 
-	dwc3_np = of_get_child_by_name(np, "dwc3");
+	dwc3_np = of_get_compatible_child(np, "snps,dwc3");
 	if (!dwc3_np) {
 		dev_err(dev, "failed to find dwc3 core child\n");
 		return -ENODEV;
-- 
2.30.1


^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH RESEND v8 7/7] arm64: dts: qcom: Harmonize DWC USB3 DT nodes name
  2021-04-09 11:30 [PATCH RESEND v8 0/7] dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name Serge Semin
                   ` (5 preceding siblings ...)
  2021-04-09 11:30 ` [PATCH RESEND v8 6/7] usb: dwc3: qcom: Detect DWC3 DT-nodes using compatible string Serge Semin
@ 2021-04-09 11:30 ` Serge Semin
  2021-04-09 15:39   ` Bjorn Andersson
  6 siblings, 1 reply; 10+ messages in thread
From: Serge Semin @ 2021-04-09 11:30 UTC (permalink / raw)
  To: Andy Gross, Bjorn Andersson, Felipe Balbi, Michael Ellerman,
	Vladimir Zapolskiy, Alexey Brodkin, Vineet Gupta, Rob Herring,
	Greg Kroah-Hartman, Krzysztof Kozlowski, linux-usb
  Cc: Serge Semin, Serge Semin, linux-arm-msm, devicetree, linux-kernel

In accordance with the DWC USB3 bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
named.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 4 ++--
 arch/arm64/boot/dts/qcom/ipq8074.dtsi        | 4 ++--
 arch/arm64/boot/dts/qcom/msm8996.dtsi        | 4 ++--
 arch/arm64/boot/dts/qcom/msm8998.dtsi        | 2 +-
 arch/arm64/boot/dts/qcom/qcs404-evb.dtsi     | 2 +-
 arch/arm64/boot/dts/qcom/qcs404.dtsi         | 4 ++--
 arch/arm64/boot/dts/qcom/sc7180.dtsi         | 2 +-
 arch/arm64/boot/dts/qcom/sdm845.dtsi         | 4 ++--
 arch/arm64/boot/dts/qcom/sm8150.dtsi         | 2 +-
 9 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index defcbd15edf9..34e97da98270 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -1064,7 +1064,7 @@ &usb2 {
 	status = "okay";
 	extcon = <&usb2_id>;
 
-	dwc3@7600000 {
+	usb@7600000 {
 		extcon = <&usb2_id>;
 		dr_mode = "otg";
 		maximum-speed = "high-speed";
@@ -1075,7 +1075,7 @@ &usb3 {
 	status = "okay";
 	extcon = <&usb3_id>;
 
-	dwc3@6a00000 {
+	usb@6a00000 {
 		extcon = <&usb3_id>;
 		dr_mode = "otg";
 	};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index a32e5e79ab0b..7df4eb710aae 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -427,7 +427,7 @@ usb_0: usb@8af8800 {
 			resets = <&gcc GCC_USB0_BCR>;
 			status = "disabled";
 
-			dwc_0: dwc3@8a00000 {
+			dwc_0: usb@8a00000 {
 				compatible = "snps,dwc3";
 				reg = <0x8a00000 0xcd00>;
 				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
@@ -468,7 +468,7 @@ usb_1: usb@8cf8800 {
 			resets = <&gcc GCC_USB1_BCR>;
 			status = "disabled";
 
-			dwc_1: dwc3@8c00000 {
+			dwc_1: usb@8c00000 {
 				compatible = "snps,dwc3";
 				reg = <0x8c00000 0xcd00>;
 				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index ce430ba9c118..9eb31b3e6ee7 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1772,7 +1772,7 @@ usb3: usb@6af8800 {
 			power-domains = <&gcc USB30_GDSC>;
 			status = "disabled";
 
-			dwc3@6a00000 {
+			usb@6a00000 {
 				compatible = "snps,dwc3";
 				reg = <0x06a00000 0xcc00>;
 				interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
@@ -1983,7 +1983,7 @@ usb2: usb@76f8800 {
 			power-domains = <&gcc USB30_GDSC>;
 			status = "disabled";
 
-			dwc3@7600000 {
+			usb@7600000 {
 				compatible = "snps,dwc3";
 				reg = <0x07600000 0xcc00>;
 				interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 1f2e93aa6553..9141c5d09b59 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -1962,7 +1962,7 @@ usb3: usb@a8f8800 {
 
 			resets = <&gcc GCC_USB_30_BCR>;
 
-			usb3_dwc3: dwc3@a800000 {
+			usb3_dwc3: usb@a800000 {
 				compatible = "snps,dwc3";
 				reg = <0x0a800000 0xcd00>;
 				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index a80c578484ba..f8a55307b855 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -337,7 +337,7 @@ &usb2_phy_sec {
 &usb3 {
 	status = "okay";
 
-	dwc3@7580000 {
+	usb@7580000 {
 		dr_mode = "host";
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 339790ba585d..9c4be020d568 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -544,7 +544,7 @@ usb3: usb@7678800 {
 			assigned-clock-rates = <19200000>, <200000000>;
 			status = "disabled";
 
-			dwc3@7580000 {
+			usb@7580000 {
 				compatible = "snps,dwc3";
 				reg = <0x07580000 0xcd00>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -573,7 +573,7 @@ usb2: usb@79b8800 {
 			assigned-clock-rates = <19200000>, <133333333>;
 			status = "disabled";
 
-			dwc3@78c0000 {
+			usb@78c0000 {
 				compatible = "snps,dwc3";
 				reg = <0x078c0000 0xcc00>;
 				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 1ea3344ab62c..8b83ffbb5b2a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2869,7 +2869,7 @@ usb_1: usb@a6f8800 {
 					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
-			usb_1_dwc3: dwc3@a600000 {
+			usb_1_dwc3: usb@a600000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a600000 0 0xe000>;
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 454f794af547..809be2c67d7a 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -3769,7 +3769,7 @@ usb_1: usb@a6f8800 {
 					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
-			usb_1_dwc3: dwc3@a600000 {
+			usb_1_dwc3: usb@a600000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a600000 0 0xcd00>;
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
@@ -3817,7 +3817,7 @@ usb_2: usb@a8f8800 {
 					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
-			usb_2_dwc3: dwc3@a800000 {
+			usb_2_dwc3: usb@a800000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a800000 0 0xcd00>;
 				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index e5bb17bc2f46..e4c3edc13676 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1719,7 +1719,7 @@ usb_1: usb@a6f8800 {
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 
-			usb_1_dwc3: dwc3@a600000 {
+			usb_1_dwc3: usb@a600000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a600000 0 0xcd00>;
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.30.1


^ permalink raw reply related	[flat|nested] 10+ messages in thread

* Re: [PATCH RESEND v8 6/7] usb: dwc3: qcom: Detect DWC3 DT-nodes using compatible string
  2021-04-09 11:30 ` [PATCH RESEND v8 6/7] usb: dwc3: qcom: Detect DWC3 DT-nodes using compatible string Serge Semin
@ 2021-04-09 14:05   ` Bjorn Andersson
  0 siblings, 0 replies; 10+ messages in thread
From: Bjorn Andersson @ 2021-04-09 14:05 UTC (permalink / raw)
  To: Serge Semin
  Cc: Andy Gross, Felipe Balbi, Michael Ellerman, Vladimir Zapolskiy,
	Alexey Brodkin, Vineet Gupta, Rob Herring, Greg Kroah-Hartman,
	Krzysztof Kozlowski, linux-usb, Serge Semin, linux-arm-msm,
	linux-kernel

On Fri 09 Apr 06:30 CDT 2021, Serge Semin wrote:

> In accordance with the USB HCD/DRD schema all the USB controllers are
> supposed to have DT-nodes named with prefix "^usb(@.*)?". Since the
> existing DT-nodes will be renamed in a subsequent patch let's fix the DWC3
> Qcom-specific code to detect the DWC3 sub-node just by checking its
> compatible string to match the "snps,dwc3". The semantic of the code
> won't change seeing all the DWC USB3 nodes are supposed to have the
> compatible property with any of those strings set.
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> 
> ---
> 
> Changelog v7:
> - Replace "of_get_child_by_name(np, "usb") ?: of_get_child_by_name(np, "dwc3");"
>   pattern with using of_get_compatible_child() method.
> - Discard Bjorn Andersson Reviewed-by tag since the patch content
>   has been changed.
> ---
>  drivers/usb/dwc3/dwc3-qcom.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index fcaf04483ad0..617a1be88371 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -644,7 +644,7 @@ static int dwc3_qcom_of_register_core(struct platform_device *pdev)
>  	struct device		*dev = &pdev->dev;
>  	int			ret;
>  
> -	dwc3_np = of_get_child_by_name(np, "dwc3");
> +	dwc3_np = of_get_compatible_child(np, "snps,dwc3");
>  	if (!dwc3_np) {
>  		dev_err(dev, "failed to find dwc3 core child\n");
>  		return -ENODEV;
> -- 
> 2.30.1
> 

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH RESEND v8 7/7] arm64: dts: qcom: Harmonize DWC USB3 DT nodes name
  2021-04-09 11:30 ` [PATCH RESEND v8 7/7] arm64: dts: qcom: Harmonize DWC USB3 DT nodes name Serge Semin
@ 2021-04-09 15:39   ` Bjorn Andersson
  0 siblings, 0 replies; 10+ messages in thread
From: Bjorn Andersson @ 2021-04-09 15:39 UTC (permalink / raw)
  To: Serge Semin
  Cc: Andy Gross, Felipe Balbi, Michael Ellerman, Vladimir Zapolskiy,
	Alexey Brodkin, Vineet Gupta, Rob Herring, Greg Kroah-Hartman,
	Krzysztof Kozlowski, linux-usb, Serge Semin, linux-arm-msm,
	devicetree, linux-kernel

On Fri 09 Apr 06:30 CDT 2021, Serge Semin wrote:

> In accordance with the DWC USB3 bindings the corresponding node
> name is suppose to comply with the Generic USB HCD DT schema, which
> requires the USB nodes to have the name acceptable by the regexp:
> "^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
> named.
> 
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

As mentioned previously, I would like to merge this through the qcom soc
tree to avoid conflicts with other activities, but need the driver code
(patch 6) to land first.

Regards,
Bjorn

> ---
>  arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 4 ++--
>  arch/arm64/boot/dts/qcom/ipq8074.dtsi        | 4 ++--
>  arch/arm64/boot/dts/qcom/msm8996.dtsi        | 4 ++--
>  arch/arm64/boot/dts/qcom/msm8998.dtsi        | 2 +-
>  arch/arm64/boot/dts/qcom/qcs404-evb.dtsi     | 2 +-
>  arch/arm64/boot/dts/qcom/qcs404.dtsi         | 4 ++--
>  arch/arm64/boot/dts/qcom/sc7180.dtsi         | 2 +-
>  arch/arm64/boot/dts/qcom/sdm845.dtsi         | 4 ++--
>  arch/arm64/boot/dts/qcom/sm8150.dtsi         | 2 +-
>  9 files changed, 14 insertions(+), 14 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
> index defcbd15edf9..34e97da98270 100644
> --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
> +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
> @@ -1064,7 +1064,7 @@ &usb2 {
>  	status = "okay";
>  	extcon = <&usb2_id>;
>  
> -	dwc3@7600000 {
> +	usb@7600000 {
>  		extcon = <&usb2_id>;
>  		dr_mode = "otg";
>  		maximum-speed = "high-speed";
> @@ -1075,7 +1075,7 @@ &usb3 {
>  	status = "okay";
>  	extcon = <&usb3_id>;
>  
> -	dwc3@6a00000 {
> +	usb@6a00000 {
>  		extcon = <&usb3_id>;
>  		dr_mode = "otg";
>  	};
> diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> index a32e5e79ab0b..7df4eb710aae 100644
> --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> @@ -427,7 +427,7 @@ usb_0: usb@8af8800 {
>  			resets = <&gcc GCC_USB0_BCR>;
>  			status = "disabled";
>  
> -			dwc_0: dwc3@8a00000 {
> +			dwc_0: usb@8a00000 {
>  				compatible = "snps,dwc3";
>  				reg = <0x8a00000 0xcd00>;
>  				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
> @@ -468,7 +468,7 @@ usb_1: usb@8cf8800 {
>  			resets = <&gcc GCC_USB1_BCR>;
>  			status = "disabled";
>  
> -			dwc_1: dwc3@8c00000 {
> +			dwc_1: usb@8c00000 {
>  				compatible = "snps,dwc3";
>  				reg = <0x8c00000 0xcd00>;
>  				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
> diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> index ce430ba9c118..9eb31b3e6ee7 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> @@ -1772,7 +1772,7 @@ usb3: usb@6af8800 {
>  			power-domains = <&gcc USB30_GDSC>;
>  			status = "disabled";
>  
> -			dwc3@6a00000 {
> +			usb@6a00000 {
>  				compatible = "snps,dwc3";
>  				reg = <0x06a00000 0xcc00>;
>  				interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
> @@ -1983,7 +1983,7 @@ usb2: usb@76f8800 {
>  			power-domains = <&gcc USB30_GDSC>;
>  			status = "disabled";
>  
> -			dwc3@7600000 {
> +			usb@7600000 {
>  				compatible = "snps,dwc3";
>  				reg = <0x07600000 0xcc00>;
>  				interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
> diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
> index 1f2e93aa6553..9141c5d09b59 100644
> --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
> @@ -1962,7 +1962,7 @@ usb3: usb@a8f8800 {
>  
>  			resets = <&gcc GCC_USB_30_BCR>;
>  
> -			usb3_dwc3: dwc3@a800000 {
> +			usb3_dwc3: usb@a800000 {
>  				compatible = "snps,dwc3";
>  				reg = <0x0a800000 0xcd00>;
>  				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
> diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
> index a80c578484ba..f8a55307b855 100644
> --- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
> @@ -337,7 +337,7 @@ &usb2_phy_sec {
>  &usb3 {
>  	status = "okay";
>  
> -	dwc3@7580000 {
> +	usb@7580000 {
>  		dr_mode = "host";
>  	};
>  };
> diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> index 339790ba585d..9c4be020d568 100644
> --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> @@ -544,7 +544,7 @@ usb3: usb@7678800 {
>  			assigned-clock-rates = <19200000>, <200000000>;
>  			status = "disabled";
>  
> -			dwc3@7580000 {
> +			usb@7580000 {
>  				compatible = "snps,dwc3";
>  				reg = <0x07580000 0xcd00>;
>  				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> @@ -573,7 +573,7 @@ usb2: usb@79b8800 {
>  			assigned-clock-rates = <19200000>, <133333333>;
>  			status = "disabled";
>  
> -			dwc3@78c0000 {
> +			usb@78c0000 {
>  				compatible = "snps,dwc3";
>  				reg = <0x078c0000 0xcc00>;
>  				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 1ea3344ab62c..8b83ffbb5b2a 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -2869,7 +2869,7 @@ usb_1: usb@a6f8800 {
>  					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>;
>  			interconnect-names = "usb-ddr", "apps-usb";
>  
> -			usb_1_dwc3: dwc3@a600000 {
> +			usb_1_dwc3: usb@a600000 {
>  				compatible = "snps,dwc3";
>  				reg = <0 0x0a600000 0 0xe000>;
>  				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 454f794af547..809be2c67d7a 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -3769,7 +3769,7 @@ usb_1: usb@a6f8800 {
>  					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
>  			interconnect-names = "usb-ddr", "apps-usb";
>  
> -			usb_1_dwc3: dwc3@a600000 {
> +			usb_1_dwc3: usb@a600000 {
>  				compatible = "snps,dwc3";
>  				reg = <0 0x0a600000 0 0xcd00>;
>  				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
> @@ -3817,7 +3817,7 @@ usb_2: usb@a8f8800 {
>  					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
>  			interconnect-names = "usb-ddr", "apps-usb";
>  
> -			usb_2_dwc3: dwc3@a800000 {
> +			usb_2_dwc3: usb@a800000 {
>  				compatible = "snps,dwc3";
>  				reg = <0 0x0a800000 0 0xcd00>;
>  				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
> diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> index e5bb17bc2f46..e4c3edc13676 100644
> --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> @@ -1719,7 +1719,7 @@ usb_1: usb@a6f8800 {
>  
>  			resets = <&gcc GCC_USB30_PRIM_BCR>;
>  
> -			usb_1_dwc3: dwc3@a600000 {
> +			usb_1_dwc3: usb@a600000 {
>  				compatible = "snps,dwc3";
>  				reg = <0 0x0a600000 0 0xcd00>;
>  				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
> -- 
> 2.30.1
> 

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2021-04-09 15:40 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-09 11:30 [PATCH RESEND v8 0/7] dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name Serge Semin
2021-04-09 11:30 ` [PATCH RESEND v8 1/7] arc: dts: Harmonize EHCI/OHCI DT " Serge Semin
2021-04-09 11:30 ` [PATCH RESEND v8 2/7] arm: dts: lpc18xx: " Serge Semin
2021-04-09 11:30 ` [PATCH RESEND v8 3/7] powerpc: dts: akebono: " Serge Semin
2021-04-09 11:30 ` [PATCH RESEND v8 4/7] arm: dts: stih407-family: Harmonize DWC USB3 " Serge Semin
2021-04-09 11:30 ` [PATCH RESEND v8 5/7] arm64: dts: apm: " Serge Semin
2021-04-09 11:30 ` [PATCH RESEND v8 6/7] usb: dwc3: qcom: Detect DWC3 DT-nodes using compatible string Serge Semin
2021-04-09 14:05   ` Bjorn Andersson
2021-04-09 11:30 ` [PATCH RESEND v8 7/7] arm64: dts: qcom: Harmonize DWC USB3 DT nodes name Serge Semin
2021-04-09 15:39   ` Bjorn Andersson

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).