From: "Fabio M. De Francesco" <fmdefrancesco@gmail.com>
To: outreachy-kernel@googlegroups.com,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org
Cc: "Fabio M. De Francesco" <fmdefrancesco@gmail.com>
Subject: [Outreachy kernel] [PATCH 1/2] staging: rtl8723bs: hal: Remove spaces before tabs
Date: Mon, 12 Apr 2021 19:59:02 +0200 [thread overview]
Message-ID: <20210412175903.17819-2-fmdefrancesco@gmail.com> (raw)
In-Reply-To: <20210412175903.17819-1-fmdefrancesco@gmail.com>
Removed spaces before tabs. Issue detected by checkpatch.pl.
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
---
drivers/staging/rtl8723bs/hal/Hal8723BReg.h | 36 ++++++++++-----------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/staging/rtl8723bs/hal/Hal8723BReg.h b/drivers/staging/rtl8723bs/hal/Hal8723BReg.h
index 616d20106392..1ff2043fb2e2 100644
--- a/drivers/staging/rtl8723bs/hal/Hal8723BReg.h
+++ b/drivers/staging/rtl8723bs/hal/Hal8723BReg.h
@@ -27,7 +27,7 @@
/* */
/* */
-/* 0x0000h ~ 0x00FFh System Configuration */
+/* 0x0000h ~ 0x00FFh System Configuration */
/* */
/* */
#define REG_SYS_ISO_CTRL_8723B 0x0000 /* 2 Byte */
@@ -84,7 +84,7 @@
/* */
/* */
-/* 0x0100h ~ 0x01FFh MACTOP General Configuration */
+/* 0x0100h ~ 0x01FFh MACTOP General Configuration */
/* */
/* */
#define REG_CR_8723B 0x0100
@@ -131,7 +131,7 @@
/* */
/* */
-/* 0x0200h ~ 0x027Fh TXDMA Configuration */
+/* 0x0200h ~ 0x027Fh TXDMA Configuration */
/* */
/* */
#define REG_RQPN_8723B 0x0200
@@ -145,7 +145,7 @@
/* */
/* */
-/* 0x0280h ~ 0x02FFh RXDMA Configuration */
+/* 0x0280h ~ 0x02FFh RXDMA Configuration */
/* */
/* */
#define REG_RXDMA_AGG_PG_TH_8723B 0x0280
@@ -161,7 +161,7 @@
/* */
/* */
-/* 0x0300h ~ 0x03FFh PCIe */
+/* 0x0300h ~ 0x03FFh PCIe */
/* */
/* */
#define REG_PCIE_CTRL_REG_8723B 0x0300
@@ -189,7 +189,7 @@
/* spec version 11 */
/* */
/* */
-/* 0x0400h ~ 0x047Fh Protocol Configuration */
+/* 0x0400h ~ 0x047Fh Protocol Configuration */
/* */
/* */
#define REG_VOQ_INFORMATION_8723B 0x0400
@@ -243,7 +243,7 @@
/* */
/* */
-/* 0x0500h ~ 0x05FFh EDCA Configuration */
+/* 0x0500h ~ 0x05FFh EDCA Configuration */
/* */
/* */
#define REG_EDCA_VO_PARAM_8723B 0x0500
@@ -263,15 +263,15 @@
#define REG_RD_CTRL_8723B 0x0524
/* */
/* Format for offset 540h-542h: */
-/* [3:0]: TBTT prohibit setup in unit of 32us. The time for HW getting beacon content before TBTT. */
-/* [7:4]: Reserved. */
-/* [19:8]: TBTT prohibit hold in unit of 32us. The time for HW holding to send the beacon packet. */
-/* [23:20]: Reserved */
+/* [3:0]: TBTT prohibit setup in unit of 32us. The time for HW getting beacon content before TBTT. */
+/* [7:4]: Reserved. */
+/* [19:8]: TBTT prohibit hold in unit of 32us. The time for HW holding to send the beacon packet. */
+/* [23:20]: Reserved */
/* Description: */
-/* | */
+/* | */
/* |<--Setup--|--Hold------------>| */
-/* --------------|---------------------- */
-/* | */
+/* --------------|---------------------- */
+/* | */
/* TBTT */
/* Note: We cannot update beacon content to HW or send any AC packets during the time between Setup and Hold. */
/* Described by Designer Tim and Bruce, 2011-01-14. */
@@ -300,7 +300,7 @@
#define REG_ACMHWCTRL_8723B 0x05C0
#define REG_SCH_TXCMD_8723B 0x05F8
-/* 0x0600h ~ 0x07FFh WMAC Configuration */
+/* 0x0600h ~ 0x07FFh WMAC Configuration */
#define REG_MAC_CR_8723B 0x0600
#define REG_TCR_8723B 0x0604
#define REG_RCR_8723B 0x0608
@@ -356,10 +356,10 @@
#define REG_SND_PTCL_CTRL_8723B 0x0718
-/* Redifine 8192C register definition for compatibility */
+/* Redifine 8192C register definition for compatibility */
-/* TODO: use these definition when using REG_xxx naming rule. */
-/* NOTE: DO NOT Remove these definition. Use later. */
+/* TODO: use these definition when using REG_xxx naming rule. */
+/* NOTE: DO NOT Remove these definition. Use later. */
#define EFUSE_CTRL_8723B REG_EFUSE_CTRL_8723B /* E-Fuse Control. */
#define EFUSE_TEST_8723B REG_EFUSE_TEST_8723B /* E-Fuse Test. */
#define MSR_8723B (REG_CR_8723B + 2) /* Media Status register */
--
2.31.1
next prev parent reply other threads:[~2021-04-12 17:59 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-12 17:59 [Outreachy kernel] [PATCH 0/2] Remove spaces and blank lines Fabio M. De Francesco
2021-04-12 17:59 ` Fabio M. De Francesco [this message]
2021-04-12 17:59 ` [Outreachy kernel] [PATCH 2/2] staging: rtl8723bs: hal: Remove multiple " Fabio M. De Francesco
2021-04-13 7:51 ` [Outreachy kernel] [PATCH 0/2] Remove spaces and " Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210412175903.17819-2-fmdefrancesco@gmail.com \
--to=fmdefrancesco@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=outreachy-kernel@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).