linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Marek Behún" <kabel@kernel.org>
To: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Cc: system@metrotek.ru, andrew@lunn.ch, hkallweit1@gmail.com,
	linux@armlinux.org.uk, davem@davemloft.net, kuba@kernel.org,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH net-next 1/2] net: phy: marvell-88x2222: check that link is operational
Date: Tue, 13 Apr 2021 01:32:12 +0200	[thread overview]
Message-ID: <20210413013122.7fa0195f@thinkpad> (raw)
In-Reply-To: <614b534f1661ecf1fff419e2f36eddfb0e6f066d.1618227910.git.i.bornyakov@metrotek.ru>

On Mon, 12 Apr 2021 15:16:59 +0300
Ivan Bornyakov <i.bornyakov@metrotek.ru> wrote:

> Some SFP modules uses RX_LOS for link indication. In such cases link
> will be always up, even without cable connected. RX_LOS changes will
> trigger link_up()/link_down() upstream operations. Thus, check that SFP
> link is operational before actual read link status.
> 
> Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
> ---
>  drivers/net/phy/marvell-88x2222.c | 26 ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 
> diff --git a/drivers/net/phy/marvell-88x2222.c b/drivers/net/phy/marvell-88x2222.c
> index eca8c2f20684..fb285ac741b2 100644
> --- a/drivers/net/phy/marvell-88x2222.c
> +++ b/drivers/net/phy/marvell-88x2222.c
> @@ -51,6 +51,7 @@
>  struct mv2222_data {
>  	phy_interface_t line_interface;
>  	__ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
> +	bool sfp_link;
>  };
>  
>  /* SFI PMA transmit enable */
> @@ -148,6 +149,9 @@ static int mv2222_read_status(struct phy_device *phydev)
>  	phydev->speed = SPEED_UNKNOWN;
>  	phydev->duplex = DUPLEX_UNKNOWN;
>  
> +	if (!priv->sfp_link)
> +		return 0;
> +

So if SFP is not used at all, if this PHY is used in a different
usecase, this function will always return 0? Is this correct?

>  	if (priv->line_interface == PHY_INTERFACE_MODE_10GBASER)
>  		link = mv2222_read_status_10g(phydev);
>  	else
> @@ -446,9 +450,31 @@ static void mv2222_sfp_remove(void *upstream)
>  	linkmode_zero(priv->supported);
>  }
>  
> +static void mv2222_sfp_link_up(void *upstream)
> +{
> +	struct phy_device *phydev = upstream;
> +	struct mv2222_data *priv;
> +
> +	priv = (struct mv2222_data *)phydev->priv;
> +
> +	priv->sfp_link = true;
> +}
> +
> +static void mv2222_sfp_link_down(void *upstream)
> +{
> +	struct phy_device *phydev = upstream;
> +	struct mv2222_data *priv;
> +
> +	priv = (struct mv2222_data *)phydev->priv;

This cast is redundant since the phydev->priv is (void*). You can cast
(void*) to (struct ... *).

You can also just use
	struct mv2222_data *priv = phydev->priv;

> +
> +	priv->sfp_link = false;
> +}
> +
>  static const struct sfp_upstream_ops sfp_phy_ops = {
>  	.module_insert = mv2222_sfp_insert,
>  	.module_remove = mv2222_sfp_remove,
> +	.link_up = mv2222_sfp_link_up,
> +	.link_down = mv2222_sfp_link_down,
>  	.attach = phy_sfp_attach,
>  	.detach = phy_sfp_detach,
>  };


  reply	other threads:[~2021-04-12 23:32 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-12 12:16 [PATCH net-next 0/2] net: phy: marvell-88x2222: a couple of improvements Ivan Bornyakov
2021-04-12 12:16 ` [PATCH net-next 1/2] net: phy: marvell-88x2222: check that link is operational Ivan Bornyakov
2021-04-12 23:32   ` Marek Behún [this message]
2021-04-13  7:13     ` Ivan Bornyakov
2021-04-13 13:07       ` Andrew Lunn
2021-04-12 23:40   ` Andrew Lunn
2021-04-13  7:19     ` Ivan Bornyakov
2021-04-13  9:23       ` Russell King - ARM Linux admin
2021-04-13 10:06         ` Ivan Bornyakov
2021-04-13 13:12         ` Andrew Lunn
2021-04-13 13:16           ` Russell King - ARM Linux admin
2021-04-12 12:17 ` [PATCH net-next 2/2] net: phy: marvell-88x2222: swap 1G/10G modes on autoneg Ivan Bornyakov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210413013122.7fa0195f@thinkpad \
    --to=kabel@kernel.org \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=hkallweit1@gmail.com \
    --cc=i.bornyakov@metrotek.ru \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=system@metrotek.ru \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).