[PATCH V3 0/3] vDPA/ifcvf: enables Intel C5000X-PL virtio-blk

[PATCH V3 0/3] vDPA/ifcvf: enables Intel C5000X-PL virtio-blk

[Zhu Lingshan]

This series enabled Intel FGPA SmartNIC C5000X-PL virtio-blk for vDPA.

This series requires:
Stefano's vdpa block patchset: https://lkml.org/lkml/2021/3/15/2113
my patchset to enable Intel FGPA SmartNIC C5000X-PL virtio-net for vDPA:
https://lkml.org/lkml/2021/3/17/432

changes from V2:
both get_features() and get_config_size() use switch code block
now(Stefano)

changes from V1:
(1)add comments to explain this driver drives virtio modern devices
and transitional devices in modern mode.(Jason)
(2)remove IFCVF_BLK_SUPPORTED_FEATURES, use hardware feature bits
directly(Jason)
(3)add error handling and message in get_config_size(Stefano)

Thanks!


Zhu Lingshan (3):
  vDPA/ifcvf: deduce VIRTIO device ID when probe
  vDPA/ifcvf: enable Intel C5000X-PL virtio-block for vDPA
  vDPA/ifcvf: get_config_size should return dev specific config size

 drivers/vdpa/ifcvf/ifcvf_base.h |  9 ++++-
 drivers/vdpa/ifcvf/ifcvf_main.c | 68 ++++++++++++++++++++++++++-------
 2 files changed, 62 insertions(+), 15 deletions(-)

-- 
2.27.0

[PATCH V3 1/3] vDPA/ifcvf: deduce VIRTIO device ID when probe

[Zhu Lingshan]

This commit deduces VIRTIO device ID as device type when probe,
then ifcvf_vdpa_get_device_id() can simply return the ID.
ifcvf_vdpa_get_features() and ifcvf_vdpa_get_config_size()
can work properly based on the device ID.

Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
---
 drivers/vdpa/ifcvf/ifcvf_base.h |  1 +
 drivers/vdpa/ifcvf/ifcvf_main.c | 30 ++++++++++++++++++------------
 2 files changed, 19 insertions(+), 12 deletions(-)

diff --git a/drivers/vdpa/ifcvf/ifcvf_base.h b/drivers/vdpa/ifcvf/ifcvf_base.h
index b2eeb16b9c2c..1c04cd256fa7 100644
--- a/drivers/vdpa/ifcvf/ifcvf_base.h
+++ b/drivers/vdpa/ifcvf/ifcvf_base.h
@@ -84,6 +84,7 @@ struct ifcvf_hw {
 	u32 notify_off_multiplier;
 	u64 req_features;
 	u64 hw_features;
+	u32 dev_type;
 	struct virtio_pci_common_cfg __iomem *common_cfg;
 	void __iomem *net_cfg;
 	struct vring_info vring[IFCVF_MAX_QUEUE_PAIRS * 2];
diff --git a/drivers/vdpa/ifcvf/ifcvf_main.c b/drivers/vdpa/ifcvf/ifcvf_main.c
index 44d7586019da..469a9b5737b7 100644
--- a/drivers/vdpa/ifcvf/ifcvf_main.c
+++ b/drivers/vdpa/ifcvf/ifcvf_main.c
@@ -323,19 +323,9 @@ static u32 ifcvf_vdpa_get_generation(struct vdpa_device *vdpa_dev)
 
 static u32 ifcvf_vdpa_get_device_id(struct vdpa_device *vdpa_dev)
 {
-	struct ifcvf_adapter *adapter = vdpa_to_adapter(vdpa_dev);
-	struct pci_dev *pdev = adapter->pdev;
-	u32 ret = -ENODEV;
-
-	if (pdev->device < 0x1000 || pdev->device > 0x107f)
-		return ret;
-
-	if (pdev->device < 0x1040)
-		ret =  pdev->subsystem_device;
-	else
-		ret =  pdev->device - 0x1040;
+	struct ifcvf_hw *vf = vdpa_to_vf(vdpa_dev);
 
-	return ret;
+	return vf->dev_type;
 }
 
 static u32 ifcvf_vdpa_get_vendor_id(struct vdpa_device *vdpa_dev)
@@ -466,6 +456,22 @@ static int ifcvf_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	pci_set_drvdata(pdev, adapter);
 
 	vf = &adapter->vf;
+
+	/* This drirver drives both modern virtio devices and transitional
+	 * devices in modern mode.
+	 * vDPA requires feature bit VIRTIO_F_ACCESS_PLATFORM,
+	 * so legacy devices and transitional devices in legacy
+	 * mode will not work for vDPA, this driver will not
+	 * drive devices with legacy interface.
+	 */
+	if (pdev->device < 0x1000 || pdev->device > 0x107f)
+		return -EOPNOTSUPP;
+
+	if (pdev->device < 0x1040)
+		vf->dev_type =  pdev->subsystem_device;
+	else
+		vf->dev_type =  pdev->device - 0x1040;
+
 	vf->base = pcim_iomap_table(pdev);
 
 	adapter->pdev = pdev;
-- 
2.27.0

[PATCH V3 2/3] vDPA/ifcvf: enable Intel C5000X-PL virtio-block for vDPA

[Zhu Lingshan]

This commit enabled Intel FPGA SmartNIC C5000X-PL virtio-block
for vDPA.

Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
---
 drivers/vdpa/ifcvf/ifcvf_base.h |  8 +++++++-
 drivers/vdpa/ifcvf/ifcvf_main.c | 19 ++++++++++++++++++-
 2 files changed, 25 insertions(+), 2 deletions(-)

diff --git a/drivers/vdpa/ifcvf/ifcvf_base.h b/drivers/vdpa/ifcvf/ifcvf_base.h
index 1c04cd256fa7..0111bfdeb342 100644
--- a/drivers/vdpa/ifcvf/ifcvf_base.h
+++ b/drivers/vdpa/ifcvf/ifcvf_base.h
@@ -15,6 +15,7 @@
 #include <linux/pci_regs.h>
 #include <linux/vdpa.h>
 #include <uapi/linux/virtio_net.h>
+#include <uapi/linux/virtio_blk.h>
 #include <uapi/linux/virtio_config.h>
 #include <uapi/linux/virtio_pci.h>
 
@@ -28,7 +29,12 @@
 #define C5000X_PL_SUBSYS_VENDOR_ID	0x8086
 #define C5000X_PL_SUBSYS_DEVICE_ID	0x0001
 
-#define IFCVF_SUPPORTED_FEATURES \
+#define C5000X_PL_BLK_VENDOR_ID		0x1AF4
+#define C5000X_PL_BLK_DEVICE_ID		0x1001
+#define C5000X_PL_BLK_SUBSYS_VENDOR_ID	0x8086
+#define C5000X_PL_BLK_SUBSYS_DEVICE_ID	0x0002
+
+#define IFCVF_NET_SUPPORTED_FEATURES \
 		((1ULL << VIRTIO_NET_F_MAC)			| \
 		 (1ULL << VIRTIO_F_ANY_LAYOUT)			| \
 		 (1ULL << VIRTIO_F_VERSION_1)			| \
diff --git a/drivers/vdpa/ifcvf/ifcvf_main.c b/drivers/vdpa/ifcvf/ifcvf_main.c
index 469a9b5737b7..376b2014916a 100644
--- a/drivers/vdpa/ifcvf/ifcvf_main.c
+++ b/drivers/vdpa/ifcvf/ifcvf_main.c
@@ -168,10 +168,23 @@ static struct ifcvf_hw *vdpa_to_vf(struct vdpa_device *vdpa_dev)
 
 static u64 ifcvf_vdpa_get_features(struct vdpa_device *vdpa_dev)
 {
+	struct ifcvf_adapter *adapter = vdpa_to_adapter(vdpa_dev);
 	struct ifcvf_hw *vf = vdpa_to_vf(vdpa_dev);
+	struct pci_dev *pdev = adapter->pdev;
+
 	u64 features;
 
-	features = ifcvf_get_features(vf) & IFCVF_SUPPORTED_FEATURES;
+	switch (vf->dev_type) {
+	case VIRTIO_ID_NET:
+		features = ifcvf_get_features(vf) & IFCVF_NET_SUPPORTED_FEATURES;
+		break;
+	case VIRTIO_ID_BLOCK:
+		features = ifcvf_get_features(vf);
+		break;
+	default:
+		features = 0;
+		IFCVF_ERR(pdev, "VIRTIO ID %u not supported\n", vf->dev_type);
+	}
 
 	return features;
 }
@@ -517,6 +530,10 @@ static struct pci_device_id ifcvf_pci_ids[] = {
 			 C5000X_PL_DEVICE_ID,
 			 C5000X_PL_SUBSYS_VENDOR_ID,
 			 C5000X_PL_SUBSYS_DEVICE_ID) },
+	{ PCI_DEVICE_SUB(C5000X_PL_BLK_VENDOR_ID,
+			 C5000X_PL_BLK_DEVICE_ID,
+			 C5000X_PL_BLK_SUBSYS_VENDOR_ID,
+			 C5000X_PL_BLK_SUBSYS_DEVICE_ID) },
 
 	{ 0 },
 };
-- 
2.27.0

[PATCH V3 3/3] vDPA/ifcvf: get_config_size should return dev specific config size

[Zhu Lingshan]

get_config_size() should return the size based on the decected
device type.

Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
---
 drivers/vdpa/ifcvf/ifcvf_main.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/drivers/vdpa/ifcvf/ifcvf_main.c b/drivers/vdpa/ifcvf/ifcvf_main.c
index 376b2014916a..3b6f7862dbb8 100644
--- a/drivers/vdpa/ifcvf/ifcvf_main.c
+++ b/drivers/vdpa/ifcvf/ifcvf_main.c
@@ -356,7 +356,24 @@ static u32 ifcvf_vdpa_get_vq_align(struct vdpa_device *vdpa_dev)
 
 static size_t ifcvf_vdpa_get_config_size(struct vdpa_device *vdpa_dev)
 {
-	return sizeof(struct virtio_net_config);
+	struct ifcvf_adapter *adapter = vdpa_to_adapter(vdpa_dev);
+	struct ifcvf_hw *vf = vdpa_to_vf(vdpa_dev);
+	struct pci_dev *pdev = adapter->pdev;
+	size_t size;
+
+	switch (vf->dev_type) {
+	case VIRTIO_ID_NET:
+		size = sizeof(struct virtio_net_config);
+		break;
+	case VIRTIO_ID_BLOCK:
+		size = sizeof(struct virtio_blk_config);
+		break;
+	default:
+		size = 0;
+		IFCVF_ERR(pdev, "VIRTIO ID %u not supported\n", vf->dev_type);
+	}
+
+	return size;
 }
 
 static void ifcvf_vdpa_get_config(struct vdpa_device *vdpa_dev,
-- 
2.27.0

Re: [PATCH V3 2/3] vDPA/ifcvf: enable Intel C5000X-PL virtio-block for vDPA

[Stefano Garzarella]

On Fri, Apr 16, 2021 at 03:16:27PM +0800, Zhu Lingshan wrote:
>This commit enabled Intel FPGA SmartNIC C5000X-PL virtio-block
>for vDPA.
>
>Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
>---
> drivers/vdpa/ifcvf/ifcvf_base.h |  8 +++++++-
> drivers/vdpa/ifcvf/ifcvf_main.c | 19 ++++++++++++++++++-
> 2 files changed, 25 insertions(+), 2 deletions(-)

Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>

>
>diff --git a/drivers/vdpa/ifcvf/ifcvf_base.h b/drivers/vdpa/ifcvf/ifcvf_base.h
>index 1c04cd256fa7..0111bfdeb342 100644
>--- a/drivers/vdpa/ifcvf/ifcvf_base.h
>+++ b/drivers/vdpa/ifcvf/ifcvf_base.h
>@@ -15,6 +15,7 @@
> #include <linux/pci_regs.h>
> #include <linux/vdpa.h>
> #include <uapi/linux/virtio_net.h>
>+#include <uapi/linux/virtio_blk.h>
> #include <uapi/linux/virtio_config.h>
> #include <uapi/linux/virtio_pci.h>
>
>@@ -28,7 +29,12 @@
> #define C5000X_PL_SUBSYS_VENDOR_ID	0x8086
> #define C5000X_PL_SUBSYS_DEVICE_ID	0x0001
>
>-#define IFCVF_SUPPORTED_FEATURES \
>+#define C5000X_PL_BLK_VENDOR_ID		0x1AF4
>+#define C5000X_PL_BLK_DEVICE_ID		0x1001
>+#define C5000X_PL_BLK_SUBSYS_VENDOR_ID	0x8086
>+#define C5000X_PL_BLK_SUBSYS_DEVICE_ID	0x0002
>+
>+#define IFCVF_NET_SUPPORTED_FEATURES \
> 		((1ULL << VIRTIO_NET_F_MAC)			| \
> 		 (1ULL << VIRTIO_F_ANY_LAYOUT)			| \
> 		 (1ULL << VIRTIO_F_VERSION_1)			| \
>diff --git a/drivers/vdpa/ifcvf/ifcvf_main.c b/drivers/vdpa/ifcvf/ifcvf_main.c
>index 469a9b5737b7..376b2014916a 100644
>--- a/drivers/vdpa/ifcvf/ifcvf_main.c
>+++ b/drivers/vdpa/ifcvf/ifcvf_main.c
>@@ -168,10 +168,23 @@ static struct ifcvf_hw *vdpa_to_vf(struct vdpa_device *vdpa_dev)
>
> static u64 ifcvf_vdpa_get_features(struct vdpa_device *vdpa_dev)
> {
>+	struct ifcvf_adapter *adapter = vdpa_to_adapter(vdpa_dev);
> 	struct ifcvf_hw *vf = vdpa_to_vf(vdpa_dev);
>+	struct pci_dev *pdev = adapter->pdev;
>+
> 	u64 features;
>
>-	features = ifcvf_get_features(vf) & IFCVF_SUPPORTED_FEATURES;
>+	switch (vf->dev_type) {
>+	case VIRTIO_ID_NET:
>+		features = ifcvf_get_features(vf) & IFCVF_NET_SUPPORTED_FEATURES;
>+		break;
>+	case VIRTIO_ID_BLOCK:
>+		features = ifcvf_get_features(vf);
>+		break;
>+	default:
>+		features = 0;
>+		IFCVF_ERR(pdev, "VIRTIO ID %u not supported\n", vf->dev_type);
>+	}
>
> 	return features;
> }
>@@ -517,6 +530,10 @@ static struct pci_device_id ifcvf_pci_ids[] = {
> 			 C5000X_PL_DEVICE_ID,
> 			 C5000X_PL_SUBSYS_VENDOR_ID,
> 			 C5000X_PL_SUBSYS_DEVICE_ID) },
>+	{ PCI_DEVICE_SUB(C5000X_PL_BLK_VENDOR_ID,
>+			 C5000X_PL_BLK_DEVICE_ID,
>+			 C5000X_PL_BLK_SUBSYS_VENDOR_ID,
>+			 C5000X_PL_BLK_SUBSYS_DEVICE_ID) },
>
> 	{ 0 },
> };
>-- 
>2.27.0
>

Re: [PATCH V3 3/3] vDPA/ifcvf: get_config_size should return dev specific config size

[Stefano Garzarella]

On Fri, Apr 16, 2021 at 03:16:28PM +0800, Zhu Lingshan wrote:
>get_config_size() should return the size based on the decected
>device type.
>
>Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
>---
> drivers/vdpa/ifcvf/ifcvf_main.c | 19 ++++++++++++++++++-
> 1 file changed, 18 insertions(+), 1 deletion(-)

Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>

>
>diff --git a/drivers/vdpa/ifcvf/ifcvf_main.c b/drivers/vdpa/ifcvf/ifcvf_main.c
>index 376b2014916a..3b6f7862dbb8 100644
>--- a/drivers/vdpa/ifcvf/ifcvf_main.c
>+++ b/drivers/vdpa/ifcvf/ifcvf_main.c
>@@ -356,7 +356,24 @@ static u32 ifcvf_vdpa_get_vq_align(struct vdpa_device *vdpa_dev)
>
> static size_t ifcvf_vdpa_get_config_size(struct vdpa_device *vdpa_dev)
> {
>-	return sizeof(struct virtio_net_config);
>+	struct ifcvf_adapter *adapter = vdpa_to_adapter(vdpa_dev);
>+	struct ifcvf_hw *vf = vdpa_to_vf(vdpa_dev);
>+	struct pci_dev *pdev = adapter->pdev;
>+	size_t size;
>+
>+	switch (vf->dev_type) {
>+	case VIRTIO_ID_NET:
>+		size = sizeof(struct virtio_net_config);
>+		break;
>+	case VIRTIO_ID_BLOCK:
>+		size = sizeof(struct virtio_blk_config);
>+		break;
>+	default:
>+		size = 0;
>+		IFCVF_ERR(pdev, "VIRTIO ID %u not supported\n", vf->dev_type);
>+	}
>+
>+	return size;
> }
>
> static void ifcvf_vdpa_get_config(struct vdpa_device *vdpa_dev,
>-- 
>2.27.0
>

Re: [PATCH V3 1/3] vDPA/ifcvf: deduce VIRTIO device ID when probe

[Jason Wang]

在 2021/4/16 下午3:16, Zhu Lingshan 写道:
> This commit deduces VIRTIO device ID as device type when probe,
> then ifcvf_vdpa_get_device_id() can simply return the ID.
> ifcvf_vdpa_get_features() and ifcvf_vdpa_get_config_size()
> can work properly based on the device ID.
>
> Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
> ---
>   drivers/vdpa/ifcvf/ifcvf_base.h |  1 +
>   drivers/vdpa/ifcvf/ifcvf_main.c | 30 ++++++++++++++++++------------
>   2 files changed, 19 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/vdpa/ifcvf/ifcvf_base.h b/drivers/vdpa/ifcvf/ifcvf_base.h
> index b2eeb16b9c2c..1c04cd256fa7 100644
> --- a/drivers/vdpa/ifcvf/ifcvf_base.h
> +++ b/drivers/vdpa/ifcvf/ifcvf_base.h
> @@ -84,6 +84,7 @@ struct ifcvf_hw {
>   	u32 notify_off_multiplier;
>   	u64 req_features;
>   	u64 hw_features;
> +	u32 dev_type;
>   	struct virtio_pci_common_cfg __iomem *common_cfg;
>   	void __iomem *net_cfg;
>   	struct vring_info vring[IFCVF_MAX_QUEUE_PAIRS * 2];
> diff --git a/drivers/vdpa/ifcvf/ifcvf_main.c b/drivers/vdpa/ifcvf/ifcvf_main.c
> index 44d7586019da..469a9b5737b7 100644
> --- a/drivers/vdpa/ifcvf/ifcvf_main.c
> +++ b/drivers/vdpa/ifcvf/ifcvf_main.c
> @@ -323,19 +323,9 @@ static u32 ifcvf_vdpa_get_generation(struct vdpa_device *vdpa_dev)
>   
>   static u32 ifcvf_vdpa_get_device_id(struct vdpa_device *vdpa_dev)
>   {
> -	struct ifcvf_adapter *adapter = vdpa_to_adapter(vdpa_dev);
> -	struct pci_dev *pdev = adapter->pdev;
> -	u32 ret = -ENODEV;
> -
> -	if (pdev->device < 0x1000 || pdev->device > 0x107f)
> -		return ret;
> -
> -	if (pdev->device < 0x1040)
> -		ret =  pdev->subsystem_device;
> -	else
> -		ret =  pdev->device - 0x1040;
> +	struct ifcvf_hw *vf = vdpa_to_vf(vdpa_dev);
>   
> -	return ret;
> +	return vf->dev_type;
>   }
>   
>   static u32 ifcvf_vdpa_get_vendor_id(struct vdpa_device *vdpa_dev)
> @@ -466,6 +456,22 @@ static int ifcvf_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>   	pci_set_drvdata(pdev, adapter);
>   
>   	vf = &adapter->vf;
> +
> +	/* This drirver drives both modern virtio devices and transitional
> +	 * devices in modern mode.
> +	 * vDPA requires feature bit VIRTIO_F_ACCESS_PLATFORM,
> +	 * so legacy devices and transitional devices in legacy
> +	 * mode will not work for vDPA, this driver will not
> +	 * drive devices with legacy interface.
> +	 */
> +	if (pdev->device < 0x1000 || pdev->device > 0x107f)
> +		return -EOPNOTSUPP;


So this seems useless, id_table has already did that for us:

The driver supports:

#define IFCVF_DEVICE_ID         0x1041

and

#define C5000X_PL_BLK_DEVICE_ID        0x1001

I think we can never reach the condition above.

Thanks


> +
> +	if (pdev->device < 0x1040)
> +		vf->dev_type =  pdev->subsystem_device;
> +	else
> +		vf->dev_type =  pdev->device - 0x1040;
> +
>   	vf->base = pcim_iomap_table(pdev);
>   
>   	adapter->pdev = pdev;

Re: [PATCH V3 2/3] vDPA/ifcvf: enable Intel C5000X-PL virtio-block for vDPA

[Jason Wang]

在 2021/4/16 下午3:16, Zhu Lingshan 写道:
> This commit enabled Intel FPGA SmartNIC C5000X-PL virtio-block
> for vDPA.
>
> Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>


Acked-by: Jason Wang <jasowang@redhat.com>


> ---
>   drivers/vdpa/ifcvf/ifcvf_base.h |  8 +++++++-
>   drivers/vdpa/ifcvf/ifcvf_main.c | 19 ++++++++++++++++++-
>   2 files changed, 25 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/vdpa/ifcvf/ifcvf_base.h b/drivers/vdpa/ifcvf/ifcvf_base.h
> index 1c04cd256fa7..0111bfdeb342 100644
> --- a/drivers/vdpa/ifcvf/ifcvf_base.h
> +++ b/drivers/vdpa/ifcvf/ifcvf_base.h
> @@ -15,6 +15,7 @@
>   #include <linux/pci_regs.h>
>   #include <linux/vdpa.h>
>   #include <uapi/linux/virtio_net.h>
> +#include <uapi/linux/virtio_blk.h>
>   #include <uapi/linux/virtio_config.h>
>   #include <uapi/linux/virtio_pci.h>
>   
> @@ -28,7 +29,12 @@
>   #define C5000X_PL_SUBSYS_VENDOR_ID	0x8086
>   #define C5000X_PL_SUBSYS_DEVICE_ID	0x0001
>   
> -#define IFCVF_SUPPORTED_FEATURES \
> +#define C5000X_PL_BLK_VENDOR_ID		0x1AF4
> +#define C5000X_PL_BLK_DEVICE_ID		0x1001
> +#define C5000X_PL_BLK_SUBSYS_VENDOR_ID	0x8086
> +#define C5000X_PL_BLK_SUBSYS_DEVICE_ID	0x0002
> +
> +#define IFCVF_NET_SUPPORTED_FEATURES \
>   		((1ULL << VIRTIO_NET_F_MAC)			| \
>   		 (1ULL << VIRTIO_F_ANY_LAYOUT)			| \
>   		 (1ULL << VIRTIO_F_VERSION_1)			| \
> diff --git a/drivers/vdpa/ifcvf/ifcvf_main.c b/drivers/vdpa/ifcvf/ifcvf_main.c
> index 469a9b5737b7..376b2014916a 100644
> --- a/drivers/vdpa/ifcvf/ifcvf_main.c
> +++ b/drivers/vdpa/ifcvf/ifcvf_main.c
> @@ -168,10 +168,23 @@ static struct ifcvf_hw *vdpa_to_vf(struct vdpa_device *vdpa_dev)
>   
>   static u64 ifcvf_vdpa_get_features(struct vdpa_device *vdpa_dev)
>   {
> +	struct ifcvf_adapter *adapter = vdpa_to_adapter(vdpa_dev);
>   	struct ifcvf_hw *vf = vdpa_to_vf(vdpa_dev);
> +	struct pci_dev *pdev = adapter->pdev;
> +
>   	u64 features;
>   
> -	features = ifcvf_get_features(vf) & IFCVF_SUPPORTED_FEATURES;
> +	switch (vf->dev_type) {
> +	case VIRTIO_ID_NET:
> +		features = ifcvf_get_features(vf) & IFCVF_NET_SUPPORTED_FEATURES;
> +		break;
> +	case VIRTIO_ID_BLOCK:
> +		features = ifcvf_get_features(vf);
> +		break;
> +	default:
> +		features = 0;
> +		IFCVF_ERR(pdev, "VIRTIO ID %u not supported\n", vf->dev_type);
> +	}
>   
>   	return features;
>   }
> @@ -517,6 +530,10 @@ static struct pci_device_id ifcvf_pci_ids[] = {
>   			 C5000X_PL_DEVICE_ID,
>   			 C5000X_PL_SUBSYS_VENDOR_ID,
>   			 C5000X_PL_SUBSYS_DEVICE_ID) },
> +	{ PCI_DEVICE_SUB(C5000X_PL_BLK_VENDOR_ID,
> +			 C5000X_PL_BLK_DEVICE_ID,
> +			 C5000X_PL_BLK_SUBSYS_VENDOR_ID,
> +			 C5000X_PL_BLK_SUBSYS_DEVICE_ID) },
>   
>   	{ 0 },
>   };

Re: [PATCH V3 3/3] vDPA/ifcvf: get_config_size should return dev specific config size

[Jason Wang]

在 2021/4/16 下午3:16, Zhu Lingshan 写道:
> get_config_size() should return the size based on the decected
> device type.
>
> Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>


Acked-by: Jason Wang <jasowang@redhat.com>


> ---
>   drivers/vdpa/ifcvf/ifcvf_main.c | 19 ++++++++++++++++++-
>   1 file changed, 18 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/vdpa/ifcvf/ifcvf_main.c b/drivers/vdpa/ifcvf/ifcvf_main.c
> index 376b2014916a..3b6f7862dbb8 100644
> --- a/drivers/vdpa/ifcvf/ifcvf_main.c
> +++ b/drivers/vdpa/ifcvf/ifcvf_main.c
> @@ -356,7 +356,24 @@ static u32 ifcvf_vdpa_get_vq_align(struct vdpa_device *vdpa_dev)
>   
>   static size_t ifcvf_vdpa_get_config_size(struct vdpa_device *vdpa_dev)
>   {
> -	return sizeof(struct virtio_net_config);
> +	struct ifcvf_adapter *adapter = vdpa_to_adapter(vdpa_dev);
> +	struct ifcvf_hw *vf = vdpa_to_vf(vdpa_dev);
> +	struct pci_dev *pdev = adapter->pdev;
> +	size_t size;
> +
> +	switch (vf->dev_type) {
> +	case VIRTIO_ID_NET:
> +		size = sizeof(struct virtio_net_config);
> +		break;
> +	case VIRTIO_ID_BLOCK:
> +		size = sizeof(struct virtio_blk_config);
> +		break;
> +	default:
> +		size = 0;
> +		IFCVF_ERR(pdev, "VIRTIO ID %u not supported\n", vf->dev_type);
> +	}
> +
> +	return size;
>   }
>   
>   static void ifcvf_vdpa_get_config(struct vdpa_device *vdpa_dev,